Runtime Errors RAISE_EXCEPTION in "SAPLTAX1" due to "INPUT_INCONSISTENT"
Hi Gurus,
Here i got dump which is Runtime Errors RAISE_EXCEPTION in program "SAPLTAX1" due to "INPUT_INCONSISTENT",
will you people please help me to resolve this problem.
here i past error details,
Short text
Exception condition "INPUT_INCONSISTENT" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLTAX1" raised the exception
condition "INPUT_INCONSISTENT".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks,
Namdev.
That message appears to come from FM CHECK_JURISDICTION_ACTIVE.
It may be a configuration piece is missing:
IF I_LAND IS INITIAL.
SELECT SINGLE * FROM T001 WHERE BUKRS = I_BUKRS.
SELECT SINGLE * FROM T005 WHERE LAND1 = T001-LAND1.
ELSEIF I_BUKRS IS INITIAL.
SELECT SINGLE * FROM T005 WHERE LAND1 = I_LAND.
ELSE.
SELECT SINGLE * FROM T001 WHERE BUKRS = I_BUKRS.
IF T001-LAND1 <> I_LAND.
RAISE INPUT_INCONSISTENT.
ELSE.
SELECT SINGLE * FROM T005 WHERE LAND1 = I_LAND.
ENDIF.
ENDIF.
Similar Messages
-
Runtime errors "Raise_Exception" occur when running crystal report
Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You. -
When executing a query showing as ABAP runtime error RAISE_EXCEPTION
Hi all,
When i executed a query, it is showing as ABAP runtime error RAISE_EXCEPTION in the short dump.
This is the Analysis in Short dump (ST22)...............
Exception condition "DATE_BEFORE_RANGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLSCAL" raised the exception
condition "DATE_BEFORE_RANGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Date is earlier than factory calendar definition
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSCAL" or "LSCALU06"
"DATE_CONVERT_TO_FACTORYDATE"
or
"SAPLSCAL" "DATE_BEFORE_RANGE"
or
"WRITEQUERY " "DATE_BEFORE_RANGE"
Could you pls any one tell me what could be the problem and how to reslove this issue.
Thanks & Regards,
Ravi Kumar.Hi Andre,
Maintain your factory calendar idents Valid To year field (BJAHR) in Table TFACD
You can do this via tcode SCAL, or navigate through SPRO.
Most likely you have your factory calendars set with Valid To dates as 2010. You may also be encountering some load issues depending on exit routines used in transformations in determining workdays/factory days etc.
Thanks,
Eric Filmer -
Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
Hi All,
I am facing a runtime error, while using transaction DSWP --> Set-up System Monitoring --> Copy Customizing -->
At that time we are getting "Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
===========================================
Runtime Errors RAISE_EXCEPTION
Date and Time 25.07.2008 08:31:11
Short text
Exception condition "METADATA_MISSING" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLDSVAS_SERV" raised the exception
condition "METADATA_MISSING".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLDSVAS_SERV" or "LDSVAS_SERVC7I"
"MAP_DSVAS_TT_DATA_TO_TT_25"
or
"SAPLDSVAS_SERV" "METADATA_MISSING"
or
"RDSMOP_MAIN " "METADATA_MISSING"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "terra"
Network address...... "172.16.1.198"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "TERRA"
Database type..... "ORACLE"
Database name..... "DSM"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 01:07:18"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 133
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 37628064
Heap.... 0
Page.... 65536
MM Used. 31785376
| MM Free. 1656912
=============================================
Configuration:
OS :Windows 2003 server.
Solution Manager 7.0 SP15
Oracle 10.2
RAM - 2 GB
Its bit urgent, Please help out us.
Thanks in advance.
Best Regards,
PratyushaHi
Check the SP level for ABAP and Basis. Download the latest SP level from SWDC and apply it on the system
This error is related to ABAP program.
Currently the latest available patch level is 16. Please download both ABAP and BASIS SP 16 and apply them on the system. -
Runtime error RAISE_EXCEPTION has occurred
I am running BDC in background for PP03 and getting this error message "Error message: (00/341) Runtime error RAISE_EXCEPTION has occurred" but while running in foreground it is working fine.In mode E there is no error ie successfully executed but in background this exception "Exception condition "CNTL_SYSTEM_ERROR" is raised......Please give details analysis of problem as i am new to ABAP-HR.. Pasting the dump also. ABAP Gurus please dont adivice me to try with other alternates like BAPI etc. As i am doN'T know about BAPI and i am bound to fix the problem by BDC only
Thanks in advanceYou cannot use PP03 in batch. It is not batch compatible.It uses some control framework which work only if the SAP GUI is active or when it is run in foreground. Use PP02 instead.A workaround of the problem would be to switch off the object manager: Set the ADMINISTRATION OBJMG switch in table T77S0 to X or (to deactivate the object manager for specific users only) proceed according to Note 496718.
In the medium or long term, SAP recommends that you use Transaction PP02 only. Transaction PP02 is and will be the only transaction that is fully batch-input-compatible (also in future releases). -
Iw31 -Recording - Runtime error RAISE_EXCEPTION has occured
Recently We updated Support Pack.
We already operating a transaction, IW31 through a recording method.
After Support Pack, We can able to create Order for only one technical object. We cannot able to create Order for other selected Technical Object.
We tried Recording through Abaper. We got a Run time Error.
Runtime error RAISE_EXCEPTION has occured
Any SAP Note to be applied.
Please suggest.
Rajahi
check in service market place for the support patch level impact notes in the maintenance and services tab, -
ABAP Runtime Error : RAISE_EXCEPTION
Hi Friends,
I am getting the below dump.
Runtime Error: RAISE_EXCEPTION
A RAISE statement in the program "SAPLRSDU_PART" raised the exception condition "TABLE_NOT_EXISTS".
Can any body help me to understand why this error occured.
Thanks & Regards
PrasanthFriends,
Below is the place where it got terminated.But the issue solved by rerunning the process chain. We have to provide report on why this error occured. So please tell me could be is the reason behnd this error.
Information on where terminated
Termination occurred in the ABAP program "SAPLRSDU_PART" - in
"RSDU_PARTITIONS_INFO_GET".
The main program was "RSPROCESS ".
In the source code you have the termination point in line 47
of the (Include) program "LRSDU_PARTU02".
The program "SAPLRSDU_PART" was started as a background job.
Job Name....... "BI_PROCESS_REPA_BC"
Job Initiator.. "MAESTRO"
Job Number..... 06564401 -
Runtime error raise_exception (Exception condition "NOT_EXIST" raised)
Hi,
I tried to ran a DTP to load data in a Standard DSO. Once I run the DTP ,instantly it is showing me short dump.I tried to ran it 2 times. Every time it shows me dump
Runtime Errors RAISE_EXCEPTION
Short Text : Exception condition "NOT_EXIST" raised.
Error Analysis : A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks in advance,
Regards,
SnehasishHi,
This kind of issues occur in BI7.0, the cause is not clear.
You can once again delete the Data in the DSO using SE14(If Production system, make sure you contact your Basis team for this).
You will have to use the table names(check the Delete data option & click on Activate and adjust databas)
Thanks, -
Runtime error RAISE_EXCEPTION occured
I have created a session after my LSMW is processed. I am not able to process the session in back ground. When I am trying to process that session in back ground, I am not able to do that. I am getting the errror "Runtime error RAISE_EXCEPTION has occured". But I am able to process that session in the foreground. Kindly suggest me something.
If the session is ran in back ground, then it is throwing the error for all the records "Runtime error RAISE_EXCEPTION has occured ".
-
Runtime Errors "RAISE_EXCEPTION"
Hi Friends,
During the execution of scheduled background job .The system is showing RUN TIME ERROR "RAISE_EXCEPTION" when i am going through job log.
Pls help me to find out the reason of this runtime error.When this occurs with this type of runtime occurs & how can i resolve this.
With Regards
AmitExceptions as raised by function modules. If a program calling the function module does not handle the exception (check for sy-subrc value after the call to the function module) or switch off the exception ( OTHERS = 0 in the function module call exception list) a dump would result in the event that the function module does raise an exception.
If this call to the function module is in a Z program you can change the code to either handle or switch off the exception. If it is an SAP program (which should not be the case because that would mean it is a bug that SAP needs to fix) then you would have to investigate why the function module failed and how can the raising of the exception be avoided.
To know which function module failed look at the dump in transaction ST22. -
Runtime error: RAISE_EXCEPTION while release invoice doc to accounting
Hi guys,
System going to dump (Run time error: RAISE_EXCEPTION) while releasing invoice document to accounting.
In VF02 screen after giving billing document as input value and if you try to release it to accounting then system is going dump and giving the above error. I have checked accounting document number ranges also, apart from this could you pls let me know any clue(functional point of view).
Thx in advance....regards.......Divakaran.....Hi,
please check whether the latest version (Version 6 from 28.07.2008)
of SAP Note 1039154 is contained in your system.
You can check this via transaction SE37 for the function module:
FI_WT_COPY_DOWNP_INFO.
The source code should look as follows:
CALL FUNCTION 'FI_WT_READ_WT_INFO'
EXPORTING
I_BUKRS = i_bukrs
I_BELNR = i_belnr
I_GJAHR = i_gjahr
I_BUZEI = i_rebzz
TABLES
T_WITH_ITEM = l_with_item
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
Please ensure that the coding in your system is the same as per the
source code in note 1039154 if changes cannot be done via snote, then
the code should be manually added.
This has solved this issue for others in the past.
The dump might also caused by FI validation.
Could you try to deactivate the FI validation by transaction OB28 and retest on the
issue.
Cheers,
Alex -
Runtime error "raise_exception" "check_failed"
Hi,
It would be great if anyone could provide solution for the issue stated below.
whenever the SAP system is restarted we are getting a dump in st22 RAISE_EXCEPTION.
username: SAPSYS, CLIENT 000 TYPE: C
Error analysis
A RAISE statement in the program "CL_SWF_XI_CST_DISPATCH_JOB=
exception
condition "CHECK_FAILED".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.Hi,
Check out SAP note 1052604 - RAISE_EXCEPTION in CHECK_FAILED exception. It gives the solution (either a correction or installation of SP13).
Ankur -
ABAP runtime errors RAISE_EXCEPTION occured
Hi all,
I have SAP Material management landscape and user gets short dumps with exception.
here are the detils.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLYMQX " in
"Y_INSERT_TO_YMTOES_INT_DTLS".
The main program was "YM_DATA_FLEX_TO_DEMAND ".
The termination occurred in line 73
of the source code of program "LYMQXU06 " (when calling the editor 730)
========
code extract
========
insert into YMTOES_INT_DTLS values wa.
if sy-subrc <> 0.
raise insert_error.
==========
Need help in how to see why this occuring.
Edited by: Vijay Dhamera on Oct 24, 2008 11:53 AMST22 details as follows
Error analysis
A RAISE statement in the program "SAPLYMQX " raised the excep
condition "INSERT_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
ERROR DURING INSERT
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls. -
Runtime Error:RAISE_EXCEPTION
Find the following steps
1) Type Transaction code: BP
2) Enter BP NO (Ex) :827
3) Enter Country code and Email address.
4) Save the BP. The Program will terminate
I got this termination in Business partner creation and editing time (Raise_Exception)Hi Sameer,
Are you surprised that you got a dump or you just want to share that news with us ?
On a serious note, if you are looking for a solution, why dont you elaborate what you are trying to do?
Do you get a dump everytime you create a BP? or
is it only for external BP? or
is it only for that number 827 ???
Regards,
L -
ABAP Runtime Error while executing planning folder
Hi experts.
We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
Appreciate if anyone can help me out with this.
Runtime Error RAISE_EXCEPTION
Date and Time 20.04.2007 16:50:23
ShrtText
Exception condition "X_MESSAGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSBR" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Cancel
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLRSSBR" or "LRSSBRU03"
"RSSB_AUTHORITY_IOBJVL_CHECK"
or
"SAPLRSSBR" "X_MESSAGE"
or
"UPB_PM_CUST_START " "X_MESSAGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "S53KJ165"
Network address.......... "10.1.53.165"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C3A11F4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "S53KJ170"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:42:11"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 16759712
Heap..................... 0
Page..................... 57344
MM Used.................. 10079624
MM Free.................. 2487240
SAP Release.............. "640"
User and Transaction
Client.............. 350
User................ "S51643"
Language key........ "E"
Transaction......... "UPSPL "
Program............. "SAPLRSSBR"
Screen.............. "SAPLUPB_PM_ALV 1000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
The termination occurred in line 416 of the source code of the (Include)
program "LRSSBRU03"
of the source code of program "LRSSBRU03" (when calling the editor 4160).
Source Code Extract
Line
SourceCde
386
l_s_range-low = l_activity.
387
APPEND l_s_range TO l_sx_auth_check_detail-range.
388
INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
389
390
CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
391
EXPORTING
392
i_infocube = g_sx_iobjvl_check-infocube
393
i_uname = l_uname
394
i_th_hierarchy = g_sx_iobjvl_check-hierarchy
395
i_message = i_message
396
i_activity_force_check = i_activity_force_check
397
CHANGING
398
c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
399
c_tx_no_auth = l_tx_no_auth
400
c_ts_auth_tlevel = e_ts_auth_tlevel
401
EXCEPTIONS
402
user_not_authorized = 1
403
auth_check_failure = 2
404
auth_check_error = 3
405
inherited_error = 4
406
x_message = 5.
407
IF sy-subrc = 0.
408
REFRESH l_tx_no_auth.
409
CR 20050826 HW873685 SP29 Part 2/3 begin
410
SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
411
ELSEIF sy-subrc = 2.
412
ao_missing = rs_c_true.
413
e_subrc = 2.
414
CR 20050826 HW873685 SP29 Part 2/3 end
415
ELSEIF sy-subrc = 5.
>>>>>
RAISE x_message.
417
ELSE.
418
e_subrc = 2.
419
ENDIF.
420
421
correct the kid now
422
LOOP AT l_tx_no_auth INTO l_sx_no_auth.
423
l_sx_no_auth-kid = <l_sx_auth_check>-kid.
424
APPEND l_sx_no_auth TO e_tx_no_auth.
425
ENDLOOP.
426
427
ENDLOOP.
428
429
End LOOP: Check all SUBNR (FEMS)
430
431
432
CR 20050826 HW873685 SP29 Part 3/3 begin
433
If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
434
this means empty no_auth table
435
IF ao_missing = rs_c_true.
Contents of system fields
Name
Val.
SY-SUBRC
5
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
210
SY-UCOMM
SELECT
SY-TITLE
Execute All Cost Element
SY-MSGTY
E
SY-MSGID
R7
SY-MSGNO
057
SY-MSGV1
0CO_AREA
SY-MSGV2
A
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
40 FUNCTION SAPLRSSBR LRSSBRU03 416
RSSB_AUTHORITY_IOBJVL_CHECK
39 FORM SAPLRSDRC LRSDRCF15 113
AUTHORITY_CHECK
38 FORM SAPLRSDRC LRSDRCF27 57
BASIC_QUERY_DATA_GET_ROLAP
37 FUNCTION SAPLRSDRC LRSDRCU05 44
RSDRC_BASIC_QUERY_DATA_GET
36 FUNCTION SAPLRSDRC LRSDRCU15 189
RSDRC_BASIC_CUBE_DATA_GET
35 FORM SAPLRSDRC LRSDRCF25 373
DATA_GET
34 FUNCTION SAPLRSDRC LRSDRCU02 249
RSDRC_CUBE_DATA_GET
33 FUNCTION SAPLRSDRI LRSDRIU01 352
RSDRI_INFOPROV_READ
32 FORM /1SEM/UPCBW_350TMWPA01 UPC_BWINTERFC__FIX 174
DATA_READ
31 FUNCTION SAPLUPCBW LUPCBWU06 56
UPC_BW_DATA_READ
30 FUNCTION SAPLUPC1 LUPC1U06 67
UPC_DATA_READ
29 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ_DB 25
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
28 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_GET 167
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
27 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_READ 5
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
26 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ 46
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
25 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 395
READ_TRANSACTION_DATA
24 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 561
GET_DATA
23 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 800
EC500_SELECT_DATABASE
22 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 575
SELECT_DATABASE
21 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 464
SELECT_AND_FIND_HEADER_COMBI
20 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 217
LOGICAL_SCREEN_FILL_HEADER
19 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 60
LOGICAL_SCREEN_FILL
18 FUNCTION SAPLUPP_PP_KERNEL LUPP_PP_KERNELU01 114
UPP_PP_KERNEL_CONSTRUCTOR
17 METHOD CL_UPB_PL_ALV=================CP CL_UPB_PL_ALV=================CM01E 176
CL_UPB_PL_ALV=>CONSTRUCTOR
16 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 623
OUTPUT_CREATE
15 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 202
OUTPUT_INIT
14 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1062
OUTPUT_PROCESS
13 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1225
OUTPUT_SWITCH_TO_LAYOUT
12 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF05 748
INIT_CONTROLS
11 MODULE (PBO) SAPLUPB_PM_ALV LUPB_PM_ALVO01 13
STATUS
10 FUNCTION SAPLUPB_PM_ALV LUPB_PM_ALVU01 24
UPB_PM_ALV_START
9 METHOD CL_UPB_PM_APPLC===============CP CL_UPB_PM_APPLC===============CM00A 88
CL_UPB_PM_APPLC=>EXECUTE_PM
8 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 76
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
7 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 23
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
6 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM003 121
CL_UPB_PM_ADMIN=>PAI
5 FORM SAPLUPB_PM LUPB_PMF04 80
USER_COMMAND_0210
4 MODULE (PAI) SAPLUPB_PM LUPB_PMI04 11
USER_COMMAND_0210
3 FUNCTION SAPLUPB_PM LUPB_PMU22 86
UPB_PM_MAIN
2 FORM UPB_PM_CUST_START UPB_PM_START_ADMIN 251
PM_START
1 EVENT UPB_PM_CUST_START UPB_PM_START_ADMIN 14
START-OF-SELECTION
Chosen variables
Name
Val.
No. 40 Ty. FUNCTION
Name RSSB_AUTHORITY_IOBJVL_CHECK
I_ACTIVITY
03
33
03
I_ACTIVITY_FORCE_CHECK
2
0
I_MESSAGE
X
5
8
I_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
I_UNAME
S51643
533333222222
351643000000
E_SUBRC
0
0000
0000
E_TS_AUTH_TLEVEL
Table[initial]
E_TX_NO_AUTH
Table[initial]
RSSB_C_AUTH_KEYFIGURE
1KYFNM
3454442222
1B96ED0000
SY-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
SYST-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
%_SPACE
2
0
RS_C_RANGE_SIGN
IE
44
95
SY-SUBRC
5
0000
0005
L_TX_NO_AUTH
Table[initial]
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
SYST
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
L_SX_NO_AUTH
############ÿÿÿÿ
000000000000FFFF
000000000000FFFF
L_SX_NO_AUTH-KID
Table[initial]
<L_SX_AUTH_CHECK>-KID
Table IT_33029[1x4]
FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
Table reference: 2052
TABH+ 0(20) = 07000000908D2FD0000000000000000000000000
TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
TABH+ 40(16) = 040002F1000003480001432821000000
store = 0x07000000908D2FD0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 2052 (0x00000804)
label = 33029 (0x00008105)
fill = 1 (0x00000001)
leng = 4 (0x00000004)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000003
occu = 1 (0x00000001)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 5 (cmpSingle)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908E0CC8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x00000001)
lineAlloc = 1 (0x00000001)
store_id = 6998 (0x00001B56)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
No. 39 Ty. FORM
Name AUTHORITY_CHECK
I_TH_SFC
Table IT_32090[14x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
Table reference: 1757
TABH+ 0(20) = 070000009052D8F8070000009081372800000000
TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
TABH+ 40(16) = 040002DB000017C80010839401000000
store = 0x070000009052D8F8
ext1 = 0x0700000090813728
shmId = 0 (0x00000000)
id = 1757 (0x000006DD)
label = 32090 (0x00007D5A)
fill = 14 (0x0000000E)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000099
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090811F18
pghook = 0x0000000000000000
idxPtr = 0x070000009052D950
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6872 (0x00001AD8)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813588
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
SY-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_S_RANGE-LOW
1ROWCOUNT
354544545222222222222222222222222222222222222222222222222222
12F73F5E4000000000000000000000000000000000000000000000000000
<L_S_SFK>-KYFNM
1ROWCOUNT
354544545222222222222222222222
12F73F5E4000000000000000000000
RSDRC_C_QUERYMODE-CUMULATIVE
C
4
3
S_S_COB_PRO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_SX_SELDR-RANGE+8(8)
Table IT_32110[2x136]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
Table reference: 1902
TABH+ 0(20) = 0700000090813D10000000000000000000000000
TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
TABH+ 40(16) = 040002DB00001AA00010254421000000
store = 0x0700000090813D10
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1902 (0x0000076E)
label = 32110 (0x00007D6E)
fill = 2 (0x00000002)
leng = 136 (0x00000088)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000112
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 2 (table_line)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908800F8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6876 (0x00001ADC)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_S_RANGE
IEQ1ROWCOUNT
4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_TSX_SELDR
Table IT_32094[13x120]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
Table reference: 1870
TABH+ 0(20) = 0700000090813AE007000000908DF36800000000
TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
store = 0x0700000090813AE0
ext1 = 0x07000000908DF368
shmId = 0 (0x00000000)
id = 1870 (0x0000074E)
label = 32094 (0x00007D5E)
fill = 13 (0x0000000D)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000103
occu = 12 (0x0000000C)
access = 2 (ItAccessSorted)
idxKind = 1 (ItIndexLinear)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000009087FB40
pghook = 0x0700000090813D68
idxPtr = 0x0700000090813DA0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 36 (0x00000024)
lineAlloc = 36 (0x00000024)
store_id = 6875 (0x00001ADB)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x07000000908DED00
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_SX_SELDR
00001KYFNM ########300 0 ####ÿÿÿÿ#### 0 ######## ####ÿÿ
333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
G_RUNNING
0
0000
0000
L_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
L_TH_FREE
Table IT_32093[6x30]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
Table reference: 1763
TABH+ 0(20) = 0700000090813760000000000000000000000000
TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
TABH+ 40(16) = 040002DB00001B800010831401000000
store = 0x0700000090813760
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1763 (0x000006E3)
label = 32093 (0x00007D5D)
fill = 6 (0x00000006)
leng = 30 (0x0000001E)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000116
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908137B8
pghook = 0x0000000000000000
idxPtr = 0x07000000908139B0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6874 (0x00001ADA)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_ACTIVITY
03
33
03
SY-UNAME
S51643
533333222222
351643000000
S_MULTICUBE
222222222222222222222222222222
000000000000000000000000000000
E_SUBRC
0
0000
0000
%_VIASELSCR
0
4
S_CHANM
222222222222222222222222222222
000000000000000000000000000000
I_RAISE_EXCEPTION
X
5
8
RS_C_TRUE
X
5
8
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FORM
Name BASIC_QUERY_DATA_GET_ROLAP
E_T_DATA
Table[initial]
E_END_OF_DATA
2
0
C_FIRST_CALL
X
5
8
S_S_QPARAM
XX 0 ##ÿÿÿÿ####DB-VIEW R ###dABAP-TABLE
25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
C_S_QPARAM-AUTHORITY_CHECK
R
5
2
RSDRC_C_AUTHCHK-NONE
2
0
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RSD_C_DPANM
0REQUID 0CHNGID 0RECORDTP 0IOB
3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
SPACE
2
0
I_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
I_TH_SFC
Table IT_32090[14x128]
I_TH_SFK
Table IT_32091[2x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
Table reference: 1767
TABH+ 0(20) = 0700000090887AC00700000090813CD800000000
TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
TABH+ 40(16) = 040002DB000018380010839421000000
store = 0x0700000090887AC0
ext1 = 0x0700000090813CD8
shmId = 0 (0x00000000)
id = 1767 (0x000006E7)
label = 32091 (0x00007D5B)
fill = 2 (0x00000002)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000101
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090884C90
pghook = 0x0000000000000000
idxPtr = 0x0700000090827A98
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6857 (0x00001AC9)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813B38
hsdir = 0x0000000000000000Have you check or trace Authorization??
In DUMP:
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
Maybe you are looking for
-
Upgrade to mac pro now FCP won't open files
Howdy, i have upgraded from a 20" imac to an 8 core mac pro with 10 gigs ram-1.82 Terra HD and now I can't open the files I was working on with the imac. I can launch FCP but once I try to open a file it crashes the program. All software is up to dat
-
ITunes not playing some music videos
My iTunes (ver. 10.1) will play the audio for some music videos but not the video. They are videos that were downloaded via the iTunes Store in the past and all but 2 are doing this and they are all the same format. No, I'm not using AirTunes! And I
-
Error message in Itune, after uninstalling and reinstalling of itune
I have uninstalled the itunes by following the instructions in apple website, removing intunes, quicktime and other components in my computer. Then after I reinstalled the itunes 10, it doesnt launch the itunes and gives me a message that "The itunes
-
My final cut pro x update is not working?
My final cut pro x update is not working for 10.0.3 I'm very upset, somesone help me I'll update lastest version of FCPX. my version is now 10.0
-
Is it possible to show a presentation on multiple Ipads at the same time?
I am running a presentation in a few months time and would like to mirror our presentation live on a number of Ipads at the same time. Currently we are most likely to use Prezi as the presentation format. Is this possible? Many thanks, Ed