Russell Brown " Image Processor Pro " does not work under CC

I just switched from Photoshop CS 6 to CC and use Russell Brown "Image Processor Pro". Unfortunately does not work that under CC. I also want to install the fix but we probably only applied to CS6.
Does anyone have a solution to the problem.
Here the German error message: https://dl.dropboxusercontent.com/u/12684660/CC_IPP.jpg
Post translated with google Translater from the German.

I installed Image Processor Pro quite some time ago. I extracted the extension package and just copied the two files "Image Processor Pro.xml" and "Image Processor Pro.jsx" into Photoshop's versions Presets\Scripts. I normally install things I add to Photoshop into my own folders outside any Adobe installation folder. Image Processor Pro is an exception because I did not want to modify X's code. Image Processor Pro is coded in a way to find which version of Photoshop is being run from and looks for its default xml file in that version Presets\scripts\ folder.
The script may save your modficaions to its defalt xml file into you user ID application data areas. And you can save you own Image Processor Pro presets configurations.
I run Windows not Mac though.

Similar Messages

I can't get Dr Browns Image Processor Pro to work from Bridge with Photoshop CC 2014

We use the wonderful DR Browns Image Processor Pro script a lot, but cannot get it to work from Bridge with PS CC 2014. When I select files in Bridge CC and then go to Tools> Dr Browns Services 2.3.1 > Image Processor Pro it just pops up an error message that says ReferenceError: photoshop is undefined.
The actual script works fine if I launch it from Photoshop CC 2014 - just not if I load it from Bridge CC.
I have unistalled it and re installed a few times, both manually and through the Extension Manager CC.
I am using a Win 7 64bit computer.
I assume there is some change in the scripting part that loads Photoshop from bridge but not sure. It worked fine in CC. Just not CC 2014.
I opened the Dr Browns Services .jsx file but don't see anything obvious. This is the section related to the Image Processor Pro part:
// This routine takes an array of files. If called by Photoshop,
// it will invoke Dr. Brown's Process 1-2-3 with the files. If called by
// any other app, it will send a BridgeTalk message to Photoshop
// to invoke this routine with the same arguments.
drbrownserv.process123 = function (files) {
// Bring Photoshop to the foreground.
BridgeTalk.bringToFront ("photoshop");
// Create a new BridgeTalk message for Photoshop to invoke
// Image Processor with the selected files
var btMessage = new BridgeTalk;
btMessage.target = "photoshop";
btMessage.body = "drbrownserv.process123 (" + files.toSource () + ");";
btMessage.send ();
} else {
photoshop.runActionCommand ('611736f0-9c46-11e0-aa82-0800200c9a66', files);
catch (error) {
if (error.number != 8007) // Don't report user cancelled errors.
drbrownserv.alert (error);

I copied that .jsx file to a new name "Xbytor Image Processor Pro.jsx" edit that file changed the string Dr Browns services to "Xbytor Image Processor Pro" then commented out all the code that added tools menu items but "Image Processor Pro" and I put that file into
"C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CC\Adobe Bridge" even though Bridge CC is 64Bit seems to use theat location.
Bridge CC was updated by the creative clouds update and opens Photoshop CC 2014 now

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Attached is screen shot. What happens is I go to File/Automate/Merge to HDR Pro, then select my 3 images, which are flattened psd files (I have tried tifs and jogs too), hit OK, it processes them, but instead of the image appearing, I get this black image. You can see my original images at bottom... jpegs too),

Minor modification to Dr Browns Image Processor Pro?

I came across Dr Browns fantastic script and I'm hoping there's a developer that might be able to help with a minor (?) revision to the code.
He has kindly released the source code on his website http://www.russellbrown.com/images/tips_downloads/OpenSource.zip
I need it to do two main things:
Save 1. run a renaming convention on the original images and retain the file type/ extension
Save 2. resize the images for web (incorporating an action called up from PS to convert to RGB). No problems here.
I know I can do this in a two step process with bridge to rename and then use the script (or indeed a droplet) to resize for web, but I wish to keep this as a one step process.
Image Processor Pro does both of these fine except for one thing:
I need an option in Save 1. to save files in the format they already are - rather than forcing all files to save into a particular format.
I get hundreds of images from various companies (I work as a designer for an arts organistion) and they are all in a variety of formats and I want to maintain the highest possible quality file we are provided.
Basically I want the option of using the naming convention section of the script without the file save as file type bit.
This assue this could be done by either skipping the File Type/ Quality section altogether (but keeping the save to subfolder), or by including "keep current extension" into the file type drop down.
Things that would also be great:
3. An option to delete/ replace originals in the process (as I will be deleting these anyway)
4. The script can be made into a drag and drop application that calls up bridge/ PS?
Any assistance on this would be great.
PS- I have posted this over on the Photoshop discussion page as well, as that is where I came across the scipt in the first place.
http://forums.adobe.com/message/5856877#5856877
Thanks

Yup didn't realise you are on mac.
If you don't want to keep the originals with their original names (ie if you're just overwriting the originals) then why mot just batch rename in bridge first? If you run an action or script then you'll have to wait whilst each file is opened and saved, whereas you run a batch rename and it's a file system task - virtually instantaneous.
Then just image processor, or a batch action from bridge (I'd create the latter because the. You can reuse it without needing to check settings or destinations over and over)

ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro

Hello!
I installed Dr. Brown Image Processor Pro.
I have Bridge and PS (CS6, CC and CC 2014) x64.
Had to do a manual install to each folder.
In Bridge I get the error
ReferenceError: photoshop is undefined? Trying to use Dr. Brown Image Processor Pro.
I tried both the CC and CS6 bridge same result.
I have about 100 1GB plus files I want to size down. and need Image processor.
Any Advice?
I tried Dr. Brown's JUST FIX IT, bit it just brought me to the script editor. I'm not a programmer.
Any advice will be appreciated.
Maxi

I wonder if this PDF Processor script would work better for you:
http://www.ps-bridge-scripts.talktalk.net/
Look under PSCS Scripts in left most column

The sound on my Macbook Pro does not work.

The sound on my Macbook Pro does not work. When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done. I went into system preferences, but there aren't any options there that I can see to change it.

"Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
Au contraire. TS1574's title and affected products are thusly:
"Troubleshooting issues with no audio from built-in speakers on Macs
Products Affected Mac mini, MacBook, MacBook Pro, iMac"
As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
2. Remove any external audio devices from USB, firewire, etc.
3. Open Sys Prefs > Sound > Output
If Internal Speakers is listed, select it and test again.
If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
If mute is selected, unselect it.
If the volume slider is low, raise the volume.
If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
I hope it gets resolved for you. Good luck.

Resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

See:
* [/questions/777886]

ICloud sync with MacBook Pro does not work

I've installed iOS 5, updated Lion to 10.7.2, marked Calendar and Contacts sync in System settings for iCloud on my Mac. However iCal and Address Book sync between iCloud and Mac (MacBook Pro) does not work though there is no problem in syncing between iCloud and iPhone. Whether I create new event or contact, change existing one or delete existing one in iCloud this change is not reflected on my Mac and vise versa. I could not find a solution in this site or in forums.

Yep, worked for me, too and now contacts and calendar seem to be syncing perfectly. We'll see if it lasts.
Thanks for your answer.

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it?

Disk burning device of my macbook pro does not work

hi
the disk burning device of my macbook pro does not work from last night!!
it don't eject and don't pick CD!!! it is off!!!!!
in my macbook pro info see this messege:No disc burning device was found. If the device is external, make sure it’s connected and turned on.
I reset my System management Controller:http://support.apple.com/kb/HT3964 But it don't right!!!!
and i can not go to a apple support!!!! i'm in dubai!!!!! is here an apple support???
it don't have any other way to solve this problem???????

Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.
If the hardware has filed there's nothing anyone here can do to help you ...

Final Cut Pro does not work with Yosemite. Can it be fixed?

Final Cut Pro does not work with Yosemite. Can it be fixed?

Hi Tom, I don't know if you can help me.
I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
HELP.
Jada.

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Nautilus-open-terminal does NOT work under x86_64

I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu

shaohao wrote:I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu
I've recompiled almost 40 days ago and i've had no problem at all.
Have you tried logging out before trying?

JCombox does not work under linux (fedora) could you help me???

Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
     private JComboBox jComboBox1;
     private JComboBox jComboBox2;
     private JPanel contentPane;
     private JTabbedPane jTabbedPane1;
     //Main Tab
     private JPanel Main;
     private JPanel OutputSimSet;
     private JPanel Test;
     private JPanel ScriptGenTab;
     private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
     public Test()
          super();
          //initializeComponent();
          contentPane = (JPanel)this.getContentPane();
          jTabbedPane1 = new JTabbedPane();
          Main = new JPanel();
          OutputSimSet = new JPanel();
          Test = new JPanel();
          ScriptGenTab = new JPanel();
          ResultTab = new JPanel();
          SimResult = new JPanel();
     jComboBox1 = new JComboBox(
                    new String[]{"Item 1","Item 2", "Item 3"});
                    jComboBox1.addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent ae) {
                    System.out.println("Yeah");
     jComboBox2 = new JComboBox(
                              new String[]{"Item 1","Item 2", "Item 3"});
                              jComboBox2.addActionListener(new ActionListener() {
                              public void actionPerformed(ActionEvent ae) {
                              System.out.println("Yeah");
          // jTabbedPane1
          jTabbedPane1.addTab("Main", Main);
          jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
          jTabbedPane1.addTab("Simulation Result", ResultTab);
          jTabbedPane1.addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e)
                    jTabbedPane1_stateChanged(e);
          // contentPane
          contentPane.setLayout(new BorderLayout(0, 0));
          contentPane.add(jTabbedPane1, BorderLayout.CENTER);
          // Main
          //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Main.setLayout(new BorderLayout(0, 0));
          Main.add(OutputSimSet,BorderLayout.NORTH);
          OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          OutputSimSet.add(Test, 0);
          Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Test.add(jComboBox1,0);
          //ResultTab
          ResultTab.setLayout(new BorderLayout(0, 0));
          ResultTab.setBorder(new TitledBorder(""));
          ResultTab.add(SimResult, BorderLayout.NORTH);
          SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          SimResult.add(jComboBox2,0);
          // Test
          this.setTitle("Test");
          this.setLocation(new Point(0, 0));
          this.setSize(new Dimension(600, 500));
          this.setVisible(true);
     public void initializeComponent()
     /** Add Component Without a Layout Manager (Absolute Positioning) */
     private void addComponent(Container container,Component c,int x,int y,int width,int height)
          c.setBounds(x,y,width,height);
          container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
          System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
          // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jComboBox1_actionPerformed(ActionEvent e)
          System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
          Object o = jComboBox1.getSelectedItem();
          System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
          // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}

package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
     super();
     //initializeComponent();
     contentPane = (JPanel)this.getContentPane();
     jTabbedPane1 = new JTabbedPane();
     Main = new JPanel();
     ScriptGenTab = new JPanel();
     ResultTab = new JPanel();
//     OutputSimSet = new JPanel();
//     Test = new JPanel();
//     SimResult = new JPanel();
     jComboBox1 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox1.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent ae) {
          System.out.println("Yeah");
     jComboBox2 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox2.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               System.out.println("Yeah");
     // Main
     //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.add(jComboBox1);
     //ResultTab -----
     ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     ResultTab.add(jComboBox2);
    //      jTabbedPane1
     jTabbedPane1.addTab("Main", Main);
     jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
     jTabbedPane1.addTab("Simulation Result", ResultTab);
     jTabbedPane1.addChangeListener(new ChangeListener() {
          public void stateChanged(ChangeEvent e)
               jTabbedPane1_stateChanged(e);
     // contentPane
     contentPane.setLayout(new BorderLayout(0, 0));
     contentPane.add(jTabbedPane1, BorderLayout.CENTER);
     // Test
     this.setTitle("Test");
     this.setLocation(new Point(0, 0));
     this.setSize(new Dimension(600, 500));
     this.setVisible(true);
     public void initializeComponent()
//     /** Add Component Without a Layout Manager (Absolute Positioning) */
//     private void addComponent(Container container,Component c,int x,int y,int width,int height)
//     c.setBounds(x,y,width,height);
//     container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
     System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
     // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
//     private void jComboBox1_actionPerformed(ActionEvent e)
//     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
//     Object o = jComboBox1.getSelectedItem();
//     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
//     // TODO: Add any handling code here for the particular object being selected
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     private static void createAndShowGUI() {
     //Create and set up the window.
     Test frame = new Test();
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.pack();
     frame.setVisible(true);
public static void main(String[] args) {
     //Schedule a job for the event-dispatching thread:
     //creating and showing this application's GUI.
     javax.swing.SwingUtilities.invokeLater(new Runnable() {
     public void run() {
     createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc...

[svn:cairngorm3:] 21174: Landmark does not work under complex situations

Revision: 21174
Revision: 21174
Author:   [email protected]
Date:     2011-04-29 11:21:00 -0700 (Fri, 29 Apr 2011)
Log Message:
Landmark does not work under complex situations
https://bugs.adobe.com/jira/browse/CGM-39
Ticket Links:
    http://bugs.adobe.com/jira/browse/CGM-39
Modified Paths:
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/EnterAndExi tInvoker.as
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/waypoint/Waypoin tHandler.as

Hi John,
1) I like that the new model adds parameterization. It's cleaner than pulling in parameters from pre-set variables. However, the given example didn't actually make much use of it. The only non-constant parameter multiply-used in the example is the "table" variable. Seems like a lot of work for not a lot of gain, at least in this case?
2) I am cautious that this new template/model condenses the paradigm sooo much, that it is no longer clear where XPath is involved vs straight constant tag names. Yes, Adobe's example is overly-expanded but that's common in code meant to be a demonstration.
3) I also am cautious that the example intermingles direct node creation into the XPath search/processing chain. I've learned to be VERY careful with this. It only can work when the changes made do not interfere with the rule processing. In my model, I simply avoid it completely (by not making node-position or node-add/remove/move changes until after tree parsing is complete.) This will always be a safe model.
Bottom line: while I very much appreciate the parameterization and lintability (is that a word? Sure makes sense to me )... I think I would still define each rule separately rather than bring them all together as an inline array in the rule processing call. To me it seems sooo condensed that the XPath meaning can become lost. (Would someone recognize that //para/section-head is actually an XPath statement that could (in another situation) be //para/* or //para/following-siblings::* ... while some of the other strings are exact-match tag names?)
I realize this is all a matter of style... my preference: clarity for the future reader, particularly when the future reader is me a year later who forgot what all those parameters and embedded methods were all about ...
Blessings,
Pete

Russell Brown " Image Processor Pro " does not work under CC

Similar Messages

Maybe you are looking for