Russian keyboard stuck in "preparing to install" p...

My phone is Lumia 620. Installed Russian keyboard, then had to reset to factory settings because of a memory card. Now when I tried to re-download it it's stuck in "preparing to install" phase for hours. I can't delete it to try again (I suppose a hard reset would work but don't want to spend another two hours re-applying my settings and downloading apps). Tried to search the net but most people have a problem with the download getting stuck, not installing. (I also suppose my download could have gone a bit wrong somewhere as my phone switched off by accident somewhere in the middle and I don't know if it could have "broken" the download?) Estonian keyboard installed correctly and very quickly.
Solved!
Go to Solution.

Well, the issue sorted itself out in the meantime, if anyone has a keyboard download stuck, just let the battery go low until the phone switches off. It could work.

Similar Messages

Stuck at "Prepare to install minimal configuration" during SAPinst

Dear Experts,
I was trying to install Solution Manager via SAPInst on windows server 2008 R2 and MS SQL 2008, but stuck at "prepare to install minimal configuration" step. The message at the status bar, showed :-
"Java process server0 of instance SOL/DEVBMGS01 [ABAP : ACTIVE, JAVA : (dispatcher: running, server0 : Unknown) did not start after 1:30"
the following is the final part of "sapinst_dev.log" file.
TRACE 2011-01-28 17:37:09.610
NWDialogInstance.getRunningState() done: ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)
TRACE 2011-01-28 17:37:09.610
NWDIState.assertStateProgress(ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN))
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress(ACTIVE, ACTIVE)
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress() done
TRACE 2011-01-28 17:37:09.610
NWDIState._assertJavaStateProgress(PARTRUNNING, PARTRUNNING)
TRACE 2011-01-28 17:37:09.610
NWDIState._assertABAPStateProgress() done
TRACE 2011-01-28 17:37:09.610
NWDIState._assertJavaProcessStatesProgress(dispatcherRUNNINGserver0UNKNOWN, dispatcherRUNNINGserver0UNKNOWN)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress(dispatcher, RUNNING, RUNNING)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress(server0, UNKNOWN, UNKNOWN)
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStateProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState._assertJavaProcessStatesProgress() done
TRACE 2011-01-28 17:37:09.611
NWDIState.unbalancedStates()
TRACE 2011-01-28 17:37:09.611
NWInstState.getElapsedString()
TRACE 2011-01-28 17:37:09.611
NWInstState.getElapsedString() done: 1:30
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS01ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)1:30server0
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates()
TRACE 2011-01-28 17:37:09.612
NWInstState.getElapsedString()
TRACE 2011-01-28 17:37:09.612
NWInstState.getElapsedString() done: 1:00
TRACE 2011-01-28 17:37:09.612
NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS01ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)1:00server0
TRACE 2011-01-28 17:37:09.613
NWException thrown: nw.progress.waitingForStartJavaFailed2:
Java process server0 of instance SOL/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
TRACE 2011-01-28 17:37:09.613
Function setMessageIdOfExceptionMessage: nw.progress.waitingForStartJavaFailed2
WARNING[E] 2011-01-28 17:37:09.613
 CJSlibModule::writeError_impl()
CJS-30151 Java process server0 of instance SOL/DVEBMGS01 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 1:30 minutes. Giving up.
TRACE 2011-01-28 17:37:09.698 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-01-28 17:37:09.822 [sixxcstepexecute.cpp:950]
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava was executed with status ERROR .
TRACE 2011-01-28 17:37:09.876 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > MS SQL Server > Central System > Central System. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </body></html>
TRACE 2011-01-28 17:37:09.876 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2011-01-28 17:37:23.236 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|startJava".
Does anyone knows what went wrong?
Regards,
Abraham

Please paste dev_server0 and std_Server0 logs from the work directory.
Thanks
Sunny

PSE 8 for Mac stuck on "preparing to install"

Hi all,
Just received the disk of PSE 8 for Mac as a present. I try to install and it gets stuck on "preparing to install."
Equipment: MacBook Pro Running 10.6.2
Have Lightroom 2, Lightrroom 3 Beta, Acrobat 8 Pro, Flash Player and Community Help Client
Previously i bought and downloaded PSE 8 but I had the same issue. I 'returned it" and got my money back.
Ideas please?
Best,
Scott

HI Scott,
Copying the text from your post on the other thread which really helped in understanding this issue:
Scott says:
"I double click the disk and use the setup.app to install.
It checks the sys profile. I then put in my serial number, etc.
Then it just stays on “Preparing to install”. (How long is it meant to do this? Maybe I am not waiting long enough?)
I click the install button. It goes grey and then back to white.
Eventually I lose patience and quit out."
Your issue is definately different than the one which could have been resolved by the Tech Doc link which I sent you earlier, actually there are two time the string "Preparing to install.." is shown during the installer workflow, first during the initialization process before the Welcome Screen is shown to the user and second for 1-2 seconds between the transition of user clicking on Install button and Progress Bar being shown to the user. Since, in your case, installer is stucking at Progress bar, the Preparing to Install string is visible evidently to you. A screenshot would have been really helpful in understanding this issue. My bad I should have asked for it...
Regarding the current situation, the workaround here with which Barbara tried to help you, will not work, because your's is very specific and rare issue which we have seen reported only once before on the forum, so I am sure we will get it sorted out.Please follow the below steps:
1. Go inside the <Macintosh HD>\Applications\Utilities\Adobe Installers\ folder.
2. If there are any uninstall alias of Adobe sub components like ESTK, Extension Manager, Bridge, Adobe Updater, etc, then please invoke that installer and uninstall all those sub components.
3. Now try to install PSE 8 again.
4. If it still doesnt work, then please run the CS4 clean up script for Mac, and select CS4 from the drop down and let me know what all applications it is listing in it as available for cleaning/deleting.
http://kb2.adobe.com/cps/406/kb406241.html#CS4CleanMac
Please keep me informed, if anything doesnt work out then eventually we will setup a time to meet over the internet and I will get this issue resolved.
Regards,
Ankush

Windows 8.1 update has been stuck in "Preparing to install" mode for 3 days now and I cannot stop it

My Windows 8.1 update has been showing "Preparing to install..." for 3 days now. When I click "Stop installation" it says I need to provide administrator permission and doesn't have any way for me to provide this. My account is the administrator
account for my laptop.
I have already seen a similar thread that said to open a command prompt with admin privileges and type "slmgr -skms", but the solution did NOT work. Basically, it said the usage was incorrect and popped up 5 windows of information that I didn't
know how to interpret (yes, I tried to provide the options it wanted, but they were incorrect).
Any advice would be appreciated!

Ah! This did the trick! Thanks!
In case anyone else has this problem, on Windows 8.1 I had to open up the Control Panel, then type "troubleshooter" in the search box. I clicked "Troubleshooting" and then found "Fix problems with Windows Update" under the System and Security section.

Can't install JDK8u20 on OSX 10.10: stuck on Preparing to install

Here are the installer -verboseR informations:
#> sudo installer -verboseR -allowUntrusted -dumplog -pkg JDK8u20.pkg -target /
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 21 18:32:19 Feline installer[97727] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
installer: Package name is JDK 8 Update 20
Aug 21 18:32:21 Feline installer[97727] <Debug>: Product archive /Users/cat/JDK8u20.pkg trustLevel=202
installer: Upgrading at base path /
installer:PHASE: Preparing to install...
Aug 21 18:32:22 Feline installer[97727] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Aug 21 18:32:22 Feline installer[97727] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/cat/JDK8u20.pkg#jdk18020.pkg
Aug 21 18:32:22 Feline installer[97727] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/cat/JDK8u20.pkg#javaappletplugin.pkg

I'm alrealy tried the Permissions Repair, the error information is short than before, but still doesn't work. Should I try some others tools like "myfix" ?
Here it is:
Aug 22 10:19:23 Feline installer[6307] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
Aug 22 10:19:23 Feline installer[6307] <Error>: IFJS: Package Authoring Error: access to path "/Library/Internet Plug-Ins/JavaAppletPlugin.plugin" requires <options allow-external-scripts='true'>
installer: Package name is JDK 8 Update 20
Aug 22 10:19:24 Feline installer[6307] <Debug>: Product archive /Users/cat/JDK8u20.pkg trustLevel=202
installer: Upgrading at base path /
installer:PHASE:正在准备安装…
Aug 22 10:19:25 Feline installer[6307] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Aug 22 10:19:25 Feline installer[6307] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/cat/JDK8u20.pkg#jdk18020.pkg
Aug 22 10:19:25 Feline installer[6307] <Debug>: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/cat/JDK8u20.pkg#javaappletplugin.pkg

HT4623 iphone 4 I am trying to install iOS6.0.1 the install is stuck in "preparing to update" and will not move forward. How do I stop the install.

I am trying to install iOS6.0.1 on my iphone4 and it is stuck on "preparing to install" How do I stop the instal?????

I'm not sure iCloud is the best community to post that question in, to be honest I have the feeling it's likely something best asked from any M$ discussion groups that there might be.

Hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings, how can i install it? (i do not use linux) may be there is firmware update?

hi, i have zte open c with Fos 1.3 and there is no russian keyboard in settings (rus locale working fine), how can i install it? (i do not use linux) may be there is firmware update or something in market?

To give an update on this issue, here is the latest information I have:
"Indeed the current eBay Open C doesn't come with root privilege. Now ZTE is going to put an engineering build on their website for users to download and flash."
I will update this thread as I know more information. Thank you for your patience.
- Ralph

Time Machine stuck on "preparing backup" and "Indexing Backup" after forced restart and install from Lion

Hello!
I have been using Time Machine on the Time Capsule for over a month now and no problems. However when I was installing Lion it had to restart. I did not see that Time Machine was going at the time when I pushed restart until it was too late.
Now Time Machine seems to be stuck on "Preparing Backup" and "Indexing Backups". It has been nearly 20-30 minutes for Indexing and I wonder if I corrupted something or something else. If there a way I can solve this problem? Thanks!

I had this same problem, this is going to sound ridiculous but this is what I finally did. I wiped my backup, crazy right?
It's there for when your hard drive crashes, so it's not like you are going to miss much if you wipe it. Tell it to stop backing up, go to disk utility, click your external and then erase it. Go back to time machine settings and reselect it as your backup drive. It will do an initial back up again and you are good to go.
Hope this helps.

Adobe CS4 Install freezes at "Preparing to Install..." on Vista

I am trying to install Adobe CS4 for the first time (it's not an upgrade) from DVD on Vista (all the latest updates are installed; Windows Update has nothing more to do). The Vista install is also pretty fresh, although I have installed a few things. The CS4 install starts and I get a "Preparing to Install..." message. But, that's it. It's stuck there indefinitely.
I have disable my antivirus software, tried to use AdobeSupportAdvisor (but it doesn't seem to be able to determine that an install has been attempted), and been working through everything on
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb404127&sliceId=1
to no avail. I get the same behavior no matter what I try.
Any suggestions are very much appreciated.

OK, I got it to install. I think what happened was really simple and stupid on my part, but I can't really say for sure because I didn't get any such info from the CS4 install program. I had an upgrade version and I was installing on a new computer. So, possibly the CS4 installer was looking for a previous version.
Anyway, here's what I did:
1. I noticed that in spite of the install not appearing to get anywhere, there were some CS4 components installed. I removed them via the usual Control Panel / Add/Remove Programs routine.
2. Install CS3.
3. Install CS4.
Worked just fine.
So, my only suggestions are:
1. If you have an upgrade version, install the version from which you are upgrading first.
2. If you had this install failure, it might help if you uninstall whatever got installed during the failed attempt(s).
Simple and obvious, I suppose, but it did get the install working.

Adobe Photoshop cs4 freezes at "Preparing to Install..." on Mac OS X 10.6

I am trying to install Adobe Photoshop CS4 for the first time (it's not an upgrade) from the trying versión of adobe.com on Mac OS X 10.6 (all the latest updates are installed). The Mac install is also pretty fresh, although I have installed a few things. The CS4 install starts and I get a "Preparing to Install..." message. But, that's it. It's stuck there indefinitely.
I have disable my antivirus software, tried to use AdobeSupportAdvisor (but it doesn't seem to be able to determine that an install has been attempted), and been working through everything on
http://kb2.adobe.com/cps/407/kb407428.html
to no avail. I get the same behavior no matter what I try.
Any suggestions are very much appreciated.

While I understand you may have valid reasons for using it, I still have to ask, why on earth are you running antivirus on OSX? I know there are a few people here who love trying to convince the rest of the world that there actually is such a thing as a Mac virus, and that the threat is very real that unprotected Macs could be vulnerable, but I've been using OS X since 10.0 (early in 2002) and I've never seen or been affected by a virus on any of seven Macs I've owned.
I've tested McAfee (Virex), Norton, and Trend Micro products for Mac only to find that they are either cumbersome and bothersome to the point that they ruin the user experience of a truly user friendly OS, or they interfered with things I was trying to do or needed to do with other software.
The end result is that I do not use antivirus of any kind on my Mac and to date I've yet to have a single problem because of that choice.
I'd wager a good guess that the root of your problems is some background process of your antivirus trying to san the installer or stop the installation altogether because the installer is newer than a virus database file, which most companies don't make a serious priority of updating for Mac since they know as well as most of us that there aren't any Mac viruses out there just waiting to destroy an OS that isn't Windows.

Hi. How I can add russian keyboard in to Firefox OS? I am using OS on nexus 4. Version 1.1

Hi. How I can add russian keyboard in to Firefox OS?
I am using OS on nexus 4.
Version Firefox OS 1.1
Instruction to install http://www.addictivetips.com/android/dual-boot-android-ubuntu-touch-or-firefox-os-on-nexus-4-7-with-multirom/
Thanks.

Hello,
As per the release notes of [https://www.mozilla.org/en-US/firefox/os/notes/1.1/ FirefoxOS 1.1] the Russian locale is supported. So, you wouldn't need to add a keyboard separately. Can you please confirm what is the issue you are seeing when you try to select the locale as Russian? Are you not able to view the Russian keyboard?
Thank you

CS5 trial installation - Preparing to install

I've tried to install the new Photoshop CS5 Extended trial on my laptop but I just can't seem to get it installed.
When I start the installer nothing happens (PDapp.exe appears in my task manager though) until I go to my task manager and remove the tokengenerator process.
Once I've done this the setup window appears and I can configure my installation until the actual installation begins. Then I just see an animated progressbar with the following captions accompanying it: 'Preparing to install...', 'Total Time remaining: Calculating...', '0% complete'.
And now I'm stuck. I can let the installer run all night if I want and it just won't start actually installing.
I've also tried removing some processes like PDapp, Setup or the Token one but it just won't work.
I've also used the adobe clean utility several times and it doesn't change a thing.
I'm using Windows 7 Professional x64, 4GB ram on a Core 2 Duo T8400.
The same problem happens (exactly the same problem) when I try to install the flash CS5 trial.
Thanks

Try transferring the installation files (usually found on your desktop) and move it to the root of your hdd (c:\) and run the installation from there

Russian keyboard for iPod touch?

iPod touch shows in: settings/international/keyboards/russian, that it is possible to use a russian keyboard.
How do I get and install such a russian keyboard in my iPod touch? which so far has only an English keyboard.
Thanks in advance
Gerhard

Go to Settings -> General -> Keyboard -> International Keyboards -> Russian and turn the slider to ON. If you don't turn the English keyboard slider OFF, you will have two keyboards. Switch between them by tapping the globe symbol left of the space bar. When you do, the spacebar will indicate the keyboard in use.

Lightroom 5 stuck in "Preparing new searchable data"

Freshly-installed Lightroom 5 stuck in "Preparing new searchable data" for hours.
Sure, I have tens of thousands of pictures, but why it takes so long and shows no progress?
It tried cancelling and starting over with no avail.

I had exactly the same thing happen while I was upgrading several of my old catalogs (LR3 and LR4). After several attempts over several days, I thought to check the forums and stumbled onto this thread. JorritJong's suggestion was most helpful (Thank you!) and allowed me to get around the problem. I had been waiting 5+ hours for one my larger catalogs to be upgraded and watching no CPU, Disk or Memory activity for the Lightroom.exe process, I got frustrated and pressed Cancel. But that hung as well. So I killed the process.
When you think about it, JorritJong's suggestion should only improve matters if there is some sort of deadlock or resource contention in the process (ie. a bug in the software). So I took it a step further and limited Lightroom.exe to 1 core (instead of his suggestion of 2). Steps: TaskMgr->Right click Lightroom.exe->Set Affinity, then uncheck "All Processors" and make sure only one is checked. Then I tried opening the very same catalog for upgrade. It was magically done in about 30 mins! Amazing!
Lightroom Devs, please fix this! Surely for every technically inclined user checking these forums and following this workaround, there must be numerous less technically proficient users who are just stuck and frustrated!

Time Machine stuck in Preparing Data Mode

In the past two days my time Machine has not made a successful back up. It seems to be stuck in "preparing data" and will stay like this all day. Even when I click the time machine preferences and stop it, it never changes. Does anyone have any solutions to this or has experienced it.Any suggestions would be greatly appreciated.
Thanks!!

Judith,
The following might contain an explanation for what you are experiencing.
*_Time Machine May Report "Preparing..." For a Long Time_*
First, it’s good to determine WHY Time Machine is "Preparing..." for an extended period of time. Examining the Console logs during this event can reveal what is actually going on behind the scenes. It may be “Preparing…” for a genuinely good reason. How long is 'too long' to wait for Time Machine to finish "Preparing..."? Some times, "Preparing..." is required to perform the normal housekeeping that Time Machine does periodically. Other times, it really is "stuck" and never proceeds after more than 24 hours.
*”Deep Traversal” (Recent Crash / Forced Restart / System Update / Extended Period Between Backups)*
According to the following KB article it can sometimes take quite a long time if Time Machine begins a “deep traversal” and has to compare data inventories. This may apply to your situation, particularly if many Gigs of data are involved. [http://support.apple.com/kb/TS1516]
You see, Time Machine *+does not+* ordinarily perform file-by-file comparisons to determine what has changed and thus determine what needs to be backed up. Rather, Time Machine relies on FSEvents notifications. This is a log that the system uses to keep track of changes to directories. Rather than scan tens of thousands of files for changes each time, Time Machine simply looks at this log and narrows its’ scan to only the directories that have experienced changes since the last backup. Otherwise, Time Machine would have to be running constantly just to catch every change on its own and thus eat up precious CPU.
Every event that FSEvents records has its’ own ID which includes a time stamp. At the end of every backup, Time Machine stores the last event ID that it processes. When the next backup is initiated, Time Machine looks at this stored ID and determines that it only needs to backup events that have occurred after the time stamp on this last event ID.
If, due to a system crash, power failure, forced restart, or some other major system event, Time Machine cannot find this last event ID in the system logs then it will consider the FSEvents log “untrustable” and it will go into what’s called “deep traversal”. The Console logs may report +“Event store UUIDs don't match”.+ In this event, Time Machine will by-pass the system log entirely and perform its’ own file-by-file comparison to determine what has changed since its’ last backup. Obviously, if tens or hundreds of Gigs are involved, then this process can take quite some time and should be allowed to proceed.
Additionally, it appears that if Time Machine has to go back too far to find the last event ID, then it will give up and simply go into “deep traversal” and do the file-by-file scan on its’ own. This can occur if Time Machine has not been able to perform its’ hourly backups for some time, as is the case for users who only backup once a week or so. This is also the case with major Mac OS system updates that change thousands of files at one time. There are simply too many events logged by the system for Time Machine to bother looking for the last known event ID.
*Consolidation / “Thinning”*
At the beginning, when Time Machine is first used, incremental backups are relatively quick events. But as time goes on, and backup files grow, Time Machine requires time to perform house-keeping on the backed up data. This maintenance is referred to in the Console logs as "thinning". The larger the backup files become, the more time Time Machine requires.
To prevent the backup drive from filling up too fast, Time Machine will periodically consolidate, or 'thin', backups to free up space for new data. After a certain period of time, each hourly backup becomes "expired". This occurs about 24-48 hours after the hourly backup took place. At that point Time Machine begins consolidating, or "thinning", all the hourly backups of a given day into one daily backup. Then, after about a month all daily backups for a given week “expire” and are consolidated into a single weekly backup.
Obviously, since the Time Machine process (backupd) does not run continuously, it has to do this "thinning" during routine backups. That is where "Preparing Backup..." and "Finishing Backup..." come in. It is during these initial and closing phases of a backup that "thinning" occurs. As a result, while not every backup will be accompanied by extended periods of "Preparing..." and "Finishing...", periodically Time Machine will require extra time to perform these space-saving consolidations.
*Anti-Virus Software*
Running anti-virus software can interfere with the backup process. Either disable it altogether, or try the suggestion outlined here, “If you use third-party anti-virus scanning software and have issues, make sure your Time Machine back up folder (Backups.backupdb on the Time Machine disk) is excluded from virus scanning.” (http://support.apple.com/kb/TS1516)
*Software Updates* #
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your Macs directories. Time Machine will backup every file that has changed since the installation.
After an OS update (like 10.5.5) Time Machine realizes the system no longer matches what it looked like during the previous backup. So it has determined that it's earlier catalogue of what-should-be-where is “untrustable”. So it is going to go item-by-item comparing the before and after of your system.
*Spotlight Keeps Indexing Backup Drive* #
It may be that Time Machine can’t proceed or complete a backup due to Spotlight indexing. During this period, take a look at the Spotlight icon in the upper right corner of your screen. Is there a tiny dot pulsating in the center of the spyglass? Click on the icon. Is there a progress bar displayed? Generally, Spotlight indexing is a good thing. If it has only been a couple of hours then, stop the backup, turn Time Machine OFF, and let the indexing continue.
However, at times Spotlight may hang and never progress after many hours, preventing further backups from taking place.
Go to System Preferences --> Time Machine.
Using the slider on the left, turn OFF Time Machine backups for now.
Next, click “Show All” in the toolbar.
Select the Spotlight Preferences.
Click the Privacy Tab.
First, drag your Macs’ internal hard disk from the desktop to the Privacy list.
Wait 10 seconds, then highlight the Macs’ hard disk in the list and click the tiny “-” button at the bottom to remove it from the list.
Spotlight will initiate a reindex of the hard disk. If you click on the Spotlight menu icon you may see the message:
+“Spotlight helps you quickly find things on your computer. Spotlight will be available as soon as the contents of your computer have been indexed.”+
...and a progress bar will indicate the time remaining.
Once completed, drag your Time Machine backup disk into the Privacy list of the Spotlight Preferences.
Wait 10 seconds, then highlight the Time Machine backup disk in the list and click the tiny “-” button at the bottom to remove it from the list.
Spotlight will now initiate a reindex of the hard disk.
Once completed, if you have any other hard disks attached to your Mac that are also being backed using Time Machine, then force a reindex as well using the procedure outlined above.
Then turn Time Machine back ON and initiate a backup.
*Run Away System Process*
It’s possible that Time Machine is stuck “Preparing…” because another process is monopolizing your Macs’ CPU. Launch Activity Monitor and sort the items by “CPU”. Is there a process that is at or near 100% that might be preventing the backupd process from moving forward?
One poster stated, “I took it to my local Genius Bar and they found a Syslogd daemon running, taking up 100% of my CPU….This resulted in the "Preparing..." mode running forever.” [http://discussions.apple.com/thread.jspa?threadID=1755600&tstart=15]
You may be able use Activity Monitor to “kill” the offending process. Or you may be able to resolve it simply by rebooting your Mac. Then try backing up again.
*Verify/Repair Mac Hard Disk & Permissions*
It may be that your Macs’ internal hard disk has so many file/directory issues that Time Machine simply has trouble making sense of it. Some users have had success using Disk Utility on their Macs’ hard drive.
Launch Disk Utility and click “Repair Disk Permissions”.
Once complete, attempt a backup.
If Time Machine appears to hang at “Preparing…” again, then do the following:
Insert your Macs’ original install DVD and reboot holding down the “C” key.
At the Welcome screen go up to the “Utilities” menu and select Disk Utility.
Select your Macs’ hard disk on the left and click “Verify Disk” on the right.
If problems are found click “Repair Disk”.
Reboot to your normal desktop and try backing up again.
*For Time Capsule Users* #
If, though, none of the options above have helped and it has been 12 hours or more of “Preparing…”, then the Time Capsule may need to be restarted.
Stop the backup from the Time Machine menu. (Give if a few minutes while it says “Stopping backup…”)
When the Time Machine icon stops spinning, unplug the TC from the wall outlet.
Wait 10-15 seconds.
Re-plug it in again.
After it has restarted (30-60 seconds), attempt another backup.
Time Machine will report “Preparing…” again, but it shouldn’t be lasting more than a couple of hours.
Let us know if any of the above was helpful in resolving your issue.
Cheers!

Russian keyboard stuck in "preparing to install" p...

Similar Messages

Maybe you are looking for