Russian Translations problem with Translation Tool Package

Hello Everybody.
I'm doing some translations and whenever I try to paste a Russian text into one of the messages in TTP, the app transforms the Russian characters into question marks. For example:
Предупреждение: Контактное лицо X не имеет связи с Бизнес-Партнером Y. Но Активность будет сохранена.
TTP Transforms it into:
??????????????: ?????????? ???? X ?? ????? ????? ? ??????-????????? Y. ?? ?????????? ????? ?????????.
Did anyone come across with this problem?
Please any information would be helpful.
Regards,
Gerardo

Hello
It looks like Translation Tool Package does not support russian character set and that's why it is displaying as '?' which means character is not recognized by the application.
Are you able to type the russian text in a note pad?? If you can type and text is proper, Operarting System is able to recognize russian characters, and not the TTP.
If it displays '?' in the notepad also, it means OS is not able to identify the Russian character set. In this case, you need to install the russian character set in the machine.
Can you please provide which CRM mobile release you are currently using. In case if you are using CRM 5.0 or above, you can translate the texts using Mobile Application Studio itself.
Regards
Shankar

Similar Messages

Problem with procedure in package

Problem with procedure in package:
create table accounts
(acno number(10),
name varchar2(20),
balance number(10,2));
create package banking is
procedure new_acct(acno NUMBER, name IN VARCHAR);
procedure acct_dep(acno IN NUMBER, amount IN NUMBER);
procedure acc_wdr(acno IN NUMBER, amount IN NUMBER);
procedure acc_bal(acno IN NUMBER, bal OUT NUMBER);
function acc_drwn(acno IN NUMBER) RETURN BOOLEAN;
end banking;
create or replace package body banking is
procedure new_acct ( acno IN number,
name IN varchar) is
begin
insert into accounts
(acno, name, balance)
values
(acno, name,0);
end;
procedure acct_dep(acno IN NUMBER,
amount IN NUMBER) is
begin
update accounts
set balance = balance + amount
where acno = acno;
end;
procedure acc_wdr(acno IN NUMBER,
amount IN NUMBER) is
begin
update accounts
set balance = balance - amount
where acno = acno;
end;
procedure acc_bal(acno IN NUMBER,
bal OUT NUMBER) is
begin
declare cursor c_balance(i_acno IN accounts.acno%type) is
select balance
from accounts
where acno = i_acno;
acc_bal accounts.balance%type;
begin
if c_balance%isopen then
close c_balance;
end if;
open c_balance(acno);
fetch c_balance into acc_bal;
close c_balance;
end;
end;
function acc_drwn(acno IN NUMBER) RETURN BOOLEAN is
begin
declare cursor c_balance(i_acno IN accounts.acno%type) is
select balance
from accounts
where acno = i_acno;
bal accounts.balance%type;
begin
if c_balance%isopen then
close c_balance;
end if;
open c_balance(acno);
fetch c_balance into bal;
close c_balance;
if bal < 0 then
return true;
else
return false;
end if;
end;
end;
end banking;
begin
banking.new_acct(123,'FRANKS');
end;
execute banking.acct_dep(123,100);
execute banking.acc_wdr(123,50);
Works fine up to this point, however when running the balance check the balance amount is not visible?
SQL> set serveroutput on
SQL> begin
2 declare
3 bal accounts.balance%type;
4 begin
5 banking.acc_bal(123,bal);
6 dbms_output.put_line('Franks balance is '||bal);
7 end;
8 end;
9 /

procedure acc_bal(acno IN NUMBER,
   bal OUT NUMBER)
is
cursor c_balance(i_acno IN accounts.acno%type) is
   select balance
   from accounts
   where acno = i_acno;
   l_acc_bal accounts.balance%type;
begin
   open c_balance(acno);
   fetch c_balance into l_acc_bal;
   close c_balance;
   bal := l_acc_bal;
end;

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!

Has anyone else had problem with the STANDARD package?

Hi Oracle gurus, has anyone here had the same problem with the STANDARD package? Or do I have to reinstall Oracle to make it work?
Thanks.
Ben

missesboggs wrote:
I literally just called AT&T and Apple about this today. I was having issues with iMessage and texting my husband. His texts back to me would show up as my name. Turns out it's because we share the same AppleID. So, I'm currently trying to change mine, but it hasn't worked so far. I'm on hold with Apple right now to see if I can get it fixed.
Both of you have registered the same email address for iMessage. If you were using a shared Apple ID and you updated your phones to iOS5, the default will be the Apple ID. Go into settings and change it.

HT1926 (iTunes) Problem with Windows installer package?

(iTunes) Problem with Windows installer package? I try to install the new version of iTunes but get an error "Problem with Windows installer package. A Program required for this install could not be run." Can anyone help shed some light for me as to how to correct this? I have tried to install the program through Chrome, Explorer and FireFox but have had no success. I have included a screenshot of the error. Hopefully it's visable. Thank you for any help.

Found answer for anyone else curious. I love the apple community. Thanks guys for help!
https://discussions.apple.com/docs/DOC-3551

Trouble with itunes upgrade I receive an error message problem with windows installer package

I am trying to upgrade itunes. I am running windows vista 64. Everytime I try to upgrade I get an error that says Problem with windows installer package. Anyone know how to fix this?

No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair.

Problems with Pro Tools 8, is it the software?

Hello, I know this is "Apple Discussions", but since I'm using Pro tools 8 with the new macbook pro, I might get some answers here. I recently bought pro tools 8, I already have logic though, but wanted to be in the pro tools world too so, the thing is that every time I use Pro Tools 8 with the digi 003, the session Im working on will stop with just a few plugins, and man this happens a lot, on the other hand is that nothing happens when I use the digi 003 with Logic 8, I mean, I could have like 20 plugins and It would not stop at all. Can anyone identify with this problem with pro tools 8, Because people tell me that on pro tools 7.4 that doesnt happen at all.
Thank you...

PT8 is much better with plug ins than PT7x, but is not in the league of Logic. I am a huge PT fan and use both Logic and PT8, and as much as I love the look and superior interface of PT8, Logic is like an ugly old car that goes 200 MPH. It's a performance beast. I've had ridiculous amounts of plug ins in Logic with not a whimper from the program.
PT8 is much more sensitive to things like whether you are using Firewire drives to record to (as opposed to internal SATAs on a Mac Pro), and many 3rd party plugs cause PT much grief. For high track counts and lots of plug ins, Logic is still King Kong.
TH
Message was edited by: Tom Hartman1

Problem with translate function (C++ parser v9)?

When upgrading to v9 of the C++ parser, we notice a problem with the translate function within xsl stylesheets. Take the following snippet :-
<StartDt><xsl:value-of select="translate(string(CheckInDate),'-','')"/></StartDt>
Previously, this statement would strip the '-' chars from our input dates of the form 2002-05-02 to give 20020502. It now does not replace the '-' chars which causes our transformed output to be invalid. We have many developed and tested xsl's which now don't work.
When we revert to v8, the same xsl's work correctly.
This happens on all platforms (Windows/Linux/Solaris).
Anyone else noticed this?
Regards,
Mike

It worked for me as well.
Use DUMP to find out the char code used for é and ú and try to replace these character codes.
On my system it is 130 and 163
SELECT TRANSLATE('héllú wúrld', 'éú', 'eu'),
       dump('héllú wúrld'),
       TRANSLATE('héllú wúrld', chr(130)||chr(163), 'eu')
FROM   dual;
hellu wurld
Typ=96 Len=11: 104,130,108,108,163,32,119,163,114,108,100
hellu wurld

Problems with translated text in captivate 7

I want to create a multilingual e-learning version. I can translate all texts. Unfortunately I can not change the selected text in the pop up window. I have no idea how I can change this text. Can someone give me a tip.

Hellou guys, Somethink similar: After installing 7.0.1 patch the project created 7.0, lose translated text inside Succes/Failure etc. captions and show default English texts, for example in quizes captions. Hmmm... In preferences dialog default labels are still translated, but after publishing project, the captions are English. So I used trick - Find/Replace dialog - and change manually all text captions with translated version. After publishing works fine. When I create new project directly in 7.0.1, there are no problem Perhapse, small bug. Can live with it because the new enhacements inside 7.0.1 is much important.:)
best regards
Yarik

Shared objects problem with translation

Hello
Here is my problem :
- my default portal language is French, and I login in French.
- I create a navpage in the "Shared objects" pagegroup. At Portal installation,
this pagegroup is in English, and there's an available translation in French.
- When i see my navPage being logged in French, the SmartLinks (Home, etc)
always display in English while i expected them to by in French.
- I don't have this problem in a "normal" pagegroup created in english and
translated into French.
regards
A.

I have a second problem with shared objects :
So, i created that navpage and published it as a portlet to use it in pages but
when it doesn't appear in the portlets lists. In what Submenu of the porlets
navigator is it supposed to appear ? It is not in the "shared instances", and i
can't see any other "shared" directory.

Problem with "Translation" Widget

Hi all,
i've got a problem with the translation widget; you can see an image here: http://tinypic.com/view.php?pic=432b9l5
How can i solve the problem?
Bye.
Thanks.

Hi.
Try this: Open Terminal and type at the prompt:
Killall Dock
that will quit Dashboard and relaunch the Dock. Then go to User/Library/Preferences and trash:
widget-com.apple.widget.translation.plist.
Then go to User/Library/Caches/DashboardClient folder and trash the subfolders inside it (they are numbered 01, 04, etc. This will clear the Dashboard cache).
Open Dashboard and verify if it works.
MacMini G4 1.25GHz 1GB Mac OS X (10.4.9)

Russian Translations problem with Translation Tool Package

Similar Messages

Maybe you are looking for