RV-042G does not let WAP connected devices access the internet

I recently replaced our old Netgear router with the RV-042G.  We have 2 wireless access points (Asus RT-N66U) that were both working before the change that now do not.  I was able to ping various external sites from the access point web gui so I know that they are connected and working.  WAP connected devices are able to pull an IP address from the router DHCP.  Is there a setting on the RV-042G that I am missing?  
Any help would be appreciated!
Thanks!

Try the following to rule out a software problem:                 
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
However, since it works with other networks that really suggests a problem with your network.

Similar Messages

  • My mac book pro just stopped allowing sound and when i restarted it, it does not let me use any of the icons on the desktop, then allows me to use them after 3 minutes,and then still NO SOUND! What do i do? PLEASE help.

    I have an issue with my computer.  the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011.  so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out.  When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT  it is a light gray color and it does not let me check the setting off.  please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
    *******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************

    That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
    Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
    Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
    Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

  • Kobo ereader does not appear as connected device

    I want to copy ebooks from ADE on my Laptop to a kobo glo but the kobo is not listed as a device when activating ADE after connecting kobo to laptop?

    I would start here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Firefox does not try to connect to my dialup internet.It just "starts" as if i were already connected

    I have used the earlier version of Firefox for several years.When I clicked on the desktop icon a window appeared and allowed me to select "dial" in order to connect to the dial up internet connection.This is the only connection available to me
    I have just downloaded and installed the newer version an now when I click on the icon the firefox home page appears but says it cannot conetct any web sites because it is not connected to the net
    I have to use Internet explorer to get connected and then switch over to Firefox

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • HT201320 My email account is with Verizon.  Everytime I try to add the account to my mini ipad it does not let me do it.  The setting of the mini ipad is for new account only.

    I need your help.  I am trying to add my verizon email account but my mini ipad is not letting me do it.  Any suggestions?

    Please describe the steps you are taking to add the account to your mini and what error messages to problems are you encountering.

  • When I lock my screen it says phone is locked and whenever I click anything it reads it out but does not let me slide to unlock the screen often but when it does it just reads of my pass code and letters but doesn't unlock my phone .

    A Voice is reading everything that I click on, on my lock screen out loud but doesn't let me slide to unlock ect i canny access the phone

    Hello TaylerLauren,
    I read your post, and it sounds as though the Voice Over feature has been activated. I have linked to an article that will instruct you on how to use it, and the location in Setting where you can turn it off:
    iOS: Configuring accessibility features
    http://support.apple.com/kb/HT5018
    Voice Over information from the iPhone User Guide:
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    VoiceOver
    VoiceOver describes aloud what appears onscreen, so you can use iPhone without seeing it.
    VoiceOver tells you about each item on the screen as you select it. The VoiceOver cursor (a rectangle) encloses the item and VoiceOver speaks its name or describes it.
    Touch the screen or drag your finger over it to hear the items on the screen. When you select text, VoiceOver reads the text. If you turn on Speak Hints, VoiceOver may tell you the name of the item and provide instructions—for example, “double-tap to open.” To interact with items, such as buttons and links, use the gestures described in Learn VoiceOver gestures on page 130.
    When you go to a new screen, VoiceOver plays a sound, then selects and speaks the first item on the screen (typically in the upper-left corner). VoiceOver also lets you know when the display changes to landscape or portrait orientation, and when the screen becomes locked or unlocked.
    Note: VoiceOver speaks in the language specified in International settings, which may be influenced by the Region Format setting in Settings > General > International. VoiceOver is available in many languages, but not all.
    VoiceOver basics
    Important: VoiceOver changes the gestures you use to control iPhone. When VoiceOver is on, you must use VoiceOver gestures to operate iPhone—even to turn VoiceOver off.
    Turn VoiceOver on or off. Go to Settings > General > Accessibility > VoiceOver, or use the Accessibility Shortcut.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Connect device to the internet using PC

    i understand that PC suit allow to  "Connect your PC to the web using your device", but i would like to use it the other way, coz connecting to the web from device is expensive. i just wanna update weather services and some podcast regularly to device using PC internet connection. i'm using nokia 6210.
    thanks.
    zenith.

    The phone isn't designed for this at all. It is designed to be used as something to enable a connection, not as something to use an existing connection.
    I'm relatively sure it can't be done via the USB cable. If you google for a piece of software called GNUBox you might be able to get it working over a bluetooth connection. This, of course, assumes you have a bluetooth adapter in your computer (either built-in or in the form of a USB dongle).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • The wifi of iPad 2 does not working good, it always disconnect the Internet.

    I don't know why my iPad always disconnect the Internet at home? While I use my iPod that it connect the Internet at home very strength, last month I brought iPad to the apple store at fashion valley to ask, one young man told me that because the Internet signal at my house is not strong. But if it not strong, my laptop and my iPod work fast.

    Well, I was expecting some help other than "go to Google." You can't offer any suggestion besides that? No troubleshooting? Aren't you an Apple expert? I thought I'd come here for advice first.
    I am aware Apple and all electronics manufacturers consider their devices unserviceable, but I wasn't about to pay Apple or a shop $200 to fix the screen.
    Thanks.

  • After the recent version update (and after my cat knocked my router down) Firefox is just not working. I can access the internet via another browser BUT all my passwords are saved in Firefox.

    I am using a PC with Windows 7, and like I said, the other browser seems to be working just fine. I just MISS my passwords and really don't want to go through all the work and trouble of requesting new ones from ALL the sites I use passwords for ! Please HELP :)

    Your second post said 'ignore this" so I guess everyone thought you had got it fixed....
    When you connect through your router you have two instances of DHCP going on...one is your DSL modem giving your router an IP address on it's WAN interface. The other is the router giving your computer an IP address via the router's DHCP server. The IP the modem gives your router is in the 192.168.1.0 network. Unfortunately, by default, the LAN IP address reange on Linksys routers is also in that range. To get this to work, you need to set your LAN ip on the router to 192.168.2.1, so that the LAN and WAN interfaces of the router are in different networks.
    To do that, unplug the router from the DSL modem, power it and your computer down, then connect the computer to the router using an ethernet cable. Power up the router, and the computer, then browse to 192.168.1.1. Change the LAN IP on the router setup to 192.168.2.1, save the configuration, then reboot the computer. Once the computer comes back up, browse to 192.168.2.1...you should be able to get to the router setup GUI.
    Power down the router, and the DSL modem, connect the router to the modem via the Internet port using an ethernet cable, then power up the modem, then the router....you should be good to go...
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • After changing email on my apple id it is impossible to access icloud as it automatically comes up with the old email, without option to change. and it does not let me log in via the old.

    Look above.

    Welcome to the Apple Community Hovedbra.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Organizer problems with Elements 12---running a PC windows 7 ---cannot set up new places subcategory and elements does not recognize that I am on the internet

    Has anyone had similar problems to the above and what is the fix??
    Thanks

    The fix was to completely remove all Apple Software following guides in previous posts.
    Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
    This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

  • How do I keep iTunes from accessing the internet? (It's not MiniStore)

    I just did a clean upgrade from iTunes 5.0 to 6.0.2. Now, with 6.0.2, however, as soon as it loads up, it tries to access the internet (224.0.0.251 Port 5353).
    I realize this is the multicast address, however, I do NOT want iTunes trying to access the internet unless I tell it to. I have already done the following:
    1. The MiniStore is hidden
    2. Check for updates is turned off
    3. Podcasts are set to check for new episodes Manually
    I don't want to have to block it at the firewall, because I don't want to lose the ability to have iTunes connect to the internet - I just don't want it doing it without my knowledge and permission.
    So, what else can I do to stop this from happening?
    PC   Windows XP Pro  

    It seems, as if me and my client have kind of the same issue. Any suggestions to this: I sent my client an invitation via my iCal from my iMac (using my yahoo calendar as the exchange server). My client accepted the invitation. Now I have deleted this appointment from my iCal and my yahoo calendar. But my client is not able to delete the appointment in his iPhone 4S. What can my client do?
    My client already went to the next apple store. There they told him to plug in his iPhone 4S to my iMac. Then he would be able to delete the appointment. Honestly, this does not make any sense to me. Why does my client have to come to me and plug in his iPhone into my iMac to get a meeting deleted. What if my client lived in a different country?????
    My client is really upset about this. Can anyone help me? Thanks in advance.

  • HT201263 My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

    My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?

    DId it successfully connect to this computer before?
    Try:
    iOS: Device not recognized in iTunes for Windows
    or
    V
    Also try placing the iPod in DFU mode and then try restoring
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

    I've found two bugs in iOS 7:
    1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
    2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

    We are all users here, just like you, but you can tell Apple about it by using this link:
    Apple - iPhone - Feedback

  • TS2972 My Apple TV does not let me see  vídeos from my Apple devices (iPhone And iPad), but is working Good with pictures And audio in internet radio transmited from my iPhone  And my iPad

    My Apple TV does not let me see vídeos when transmiting from my iPad And iPhone, however let me listen music And see the pictures when transmiting from theese  devices.

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

Maybe you are looking for

  • How can I set up a rule to delete all messages older than 6 months left in Apple Mail's main inbox?

    How can I set up a rule to delete all messages older than 6 months left in Apple Mail's main inbox? I have created other rules to move some of my daily messages into specific folders and I don't wish to auto-delete those. Just the general stuff that

  • MRP planning and Availability check

    Dear Friends , We are updating  Availablity check in the MRP view for all materials in materials master , While running MRP system is considering ATP check as per SPRO settings defined for Availablity check group . Weare not conclude what is the rela

  • Indesign and MathType fonts

    I am having trouble getting Indesign to recognize MathType fonts.  I have been told to move the MathType fonts over two the Indesign Font folder.  I copied the MT-extra font file from MathType folder and pasted it into the Indesign font folder.  Noth

  • Help Requested - Agents/Scheduler/Bursting Mode/

    Hello, I have OBIEE 11G. I have an automated email bursting requirement. The details are - I have one Table of people's names, address, email id and personal details. These people are not intended to be OBIEE users. It is a table with people's names

  • Generell Information about Netweaver,BW,SEM,etc.

    Hello I read at the moment a book but I'm very confused. Then I don't know about SAP environment. I look for a overview. There will explain the Netweaver to BW and SEM and Business Analytics. (e.g. firstly ist Netweaver install and BW is a part from