RV 120W: Simple Bug in Time Settings

Hello CISCO,
if you bring your new firmware, please verify the small bug in 'Time Settings': If you choose CET (GMT +1h) AND enable 'daylights saving time' the time goes back 6 hours instead of forward 1 hour.
Firmware of RV120W: 1.0.1.3
Additionally, I'm waiting too for the problem described in https://supportforums.cisco.com/thread/2047272. I'm surprised that CISCO needs such a long time to solve such an issue... I thought I bought the new router from a leading network provider.
Best regards
Christian

BUMP
Same issue with time. Whether set to Standard NTP, Custom NTP by DNS, or Custom NTP by IP address the router will simply not get the correct time. Set by PC works, but after restarting it goes back to default of
01/01/2000 00:00.
Also, for ours (5) setting the DST settings does not work. After setting the dates and hitting apply, they simply roll back to Jan/01, Jan/01.
On that; PLEASE update all the routers to do DST not by a hardcoded month/date ... DST falls on Sundays guys! It changes every year. Setting DST by the [1,2,3,4,5]th Sunday in [J,F,M,A,M,J,J,A,S,O,N,D] is the more appropriate selection criteria.

Similar Messages

My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?

My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?

Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday.

When dual-booting with Windows 7, Mac OSX time settings reset every reboot.

I have recently installed Windows 7 Professional on my mid 2010 MacBook Pro via BootCamp (Running Mavericks BTW). Everything runs grean and have not experienced any problems on the Windows side, but I have a problem with Mac OSX now. When I am using Windows 7, and I reboot into Mac OSX, I find that my time settings are wrong. It seems like my time zone has changed, because the date is correct, as well as the minutes, but the hour is always wrong. When I go to Date & Time in System Preferences, and my time zone is correct, but I still have to chage the hour in the time. Any ideas as to why this is happening and how to stop it would be greatly appreciated.

If you dual boot your Windows PC with OS X or Linux, you may have experienced a problem in which your clocks reset themselves incorrectly every time you boot into Windows. Here's a simple registry edit to fix that.
Essentially, the incorrect clock setting happens because OS X and Linux use GMT time while Windows tries to synchronize with your local time zone, getting confused when you reboot between the two. Apple's own Boot Camp drivers for Windows are supposed to fix this problem, though some users have noticed that it still happens even with the drivers installed, and some Linux users are left out in the cold. Furthermore, if you have a Hackintosh, you can't install the Boot Camp drivers, so you'll need to find another way around the problem.
To fix it, just hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
Lastly, reboot into OS X, then reboot back into Windows. You should now notice that your clock actually displays the correct time.

BUG: Copy / Paste settings

This bug has been reported in various forms. But I'd like to chime in.
I'm finding that the set of develop settings I copy are not pasting correctly onto other images. Sometimes settings I have NOT checked are pasted; other times settings I HAVE checked are being pasted. The bug does not seem to be related to the specific combination of settings checked and unchecked. Particularly I've found that copy/pasting UNCHECKED white point settings will not paste. UNCHECKED crop will paste. It's quite frustrating. I have not found a work around.
I am using LR 3.2 RC.

Mark, you can report this here. This would be most helpful. This forum is now mostly for user help rather than technical issues.

Where to go to see Lead Time settings? Calendar days vs working days

Hi everybody,
II'm trying to find the screen where details regarding Lead Time settings are shown. I'm looking specifically for information on the type of days we're using to identify Processing LT's. I'm not certain whether we're using calendar days or working days.
I'm sure there is a simple way of finding this information out, but just don't know where to look/change the setting.
Thanks,
BG

This is NOT a setting that you can view.
Oracle always behaves like this.
Best way to verify this is to create an item with PreLt=5, Processing LT=7 and Post-processing lt=5.
Then create a sales order with a due date of say 9/21. Make sure 9/1 to 9/21 is regular 5 days week.
Assuming no holidays, it will mean that you need material on the dock on 9/15 (5 days of PPLT = 7 calendar days.)
So when MRP/ASCP creates a Req/PO, the promised date will be 9/15.
Also, the Days from today will point to 9/1 - which includes 7 days of processing + 7 days of preprocessing (5 working days)
Hope this answers your quesiton.

Time settings in Calendar ?

Having trouble with the times in calendar... I know this might sound simple but every time I make an entry on my calendar (I'm in CST) it posts the time in PST... I have the date and time in settings set to Central, anyone have an idea what I'm doing wrong?

I turned on time zone support, opened individual events (that had been set in Central time) and changed the time zone to floating. When I set time zone support to Pacific time, every event I had manually changed to floating displayed correctly - but events I did not manually change still moved backwards two hours.
That's the expected behaviour. It assumes that events created in Missouri will occur in Missouri. When you are in Seattle it corrects the time, so you won't miss the event if you use a live video feed or phone in.
I have hundreds of events in my calendar, do I really have to open each one up and change it to floating?
You should change each event to the time zone of the event's location. Floating should be reserved for events that have no fixed location. e.g. if you want to schedule lunch for noon wherever you happen to be.
At the top of the calndar window you can set the view time zone. For example, while in Missouri you can set it to Pacific to see what you schedule will look like when you go to Seattle.

Premiere Pro & Audition tifferent time settings and cant edit anything correctly.

In Premiere Pro i put video, edit it in After Effects but audio in Audition.
When all is correct then i speed up video in Premiere pro but since audio speedup is shi-bad therefore i speed up in audition BUT ITS IMPOSSIBLE TO GET CORRECT TIME LINE IN PREMIERE TO PUT IN IN AUDIOTION.
In Audiotion Effect/Time and pitch/Strech and pitcher when i put same speed as in Premiere, Audition does the opposite.
Thats one fuc-bad bug/difference. Ok. So then ill try to hover with mouse video i just speed up lenght in Premiere. Hovering gives in, out point times and total time of clips leght. Right? Maybe.. couse if i put that lenght in Audidiotion as desired legnght, clicked save and ctrl+s alt+f4 and see in Premiere.. THEN IS SOMEHOW A LOT SHORTER THEN IT WAS SUPPOSED TO BE.
In Idiotion i can change time settings and none helps.
In PremiProion i can change to audio time and that isnt corrent also.
Even just opening audio in Audition from Premiere without speed up they show whatever you change a different times.

Clip with Video/Audio i put in Premiere
Divided
Video clip right click replace with After Effect composition.
and what i do in premiere doesnt matter couse lenght i ckeck in Premiere hovering over other example video (to see the lenght witch to write in desired Audition speed up couse in audition 115% speedup is speedown for any illogical reason)
So Original ivdeo/audiot i speed up to see leght hovering with mouse over
BUT in Audition it shows ( i dont care what it shows i just need to put correct value in percentage in Audition but since that also doesnt work i need to know correct leght)
SO how long video i need?
In premiere audio original leght witch is now open in audition
OR in speedup settings
LOL WUT? Different duration bug also and doesnt change ANYTHING couse differences allways were for one clip- too long for other too short when using times from premiere.
SO 115 % eh? If we dont look then all is fine and i dont care what is in premiere in end and i dont need to read that duration is now too long. I would automatically just save export and then in hollywood only see something was wrong with this premieridiotion software but not my assumtions.
Ok since i saw that 115% in premiere now turnet too long..
I check whats wrong for some time. Then i try all again slow and i see there duration.
Ok i enter duration witch we now check in premiere (where else?, the clip is shortened in premiere)
AND NOW ITS TOO SHORT
Heres time settings. NONE SHOW EXACT LENGHT OF AUDIO SAME AS IN PREMIERE
SO what are time FPS in Premiere? Whats the difference? Shouldnt they work at least on some standarts?
ps. also adding to bug of ****** Premiere audio speed up and solution bugs in Audition, here another bug- YOU CANT ENTER THIS CUSTOM FPS SPEED AS I SEE IN PREMIERE IT WANTS TO WORK WITH AUTOMATICALLY 24,81 fps
AND WHY WOULDNT THEY BE AUTOMATICALLY SYNCHRONIZED if audio is LINKED TO PREMIERE???

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

TS4000 What is the "correct" date and time settings for icloud reminders?

What is the "correct" date and time settings for icloud reminders?

Sep. 18th. We don't know what time.

Time settings problem

Hi need some help because i'm completely stuck. All of a sudden my Iphone 3GS has gone back a day in date and 6 hours ahead in time. Obviously my phone is set to automatic and always has been, this has never been an issue till now.
Tried to reset my phone and then set my time manually and then back to automatic but same problem. I can't send imessages now because it tells me my date and time settings need to be updated. I was ios 6.0 when this happened and then updated top 6.0.1 to try and fix it but still no luck.
Urgent help needed.

The timezone components need to be capitalized. Try: TIMEZONE="America/Toronto" in your /etc/rc.conf.
You can also give NTP a try, if you're not using it already.

Bug in Time Machine 10.6 OS X Server, Error: (-41) SrcErr:NO Copying

Hello
It seems there is a bug in Time Machine which never occured in 10.5.8
We had a Mac OS X Server 10.5, with 2 external RAIDs, one with the SharePoints of Data and one as Time Machine Volume. This solution runs soomthly for 1 1/2 year.
Now we updated the OS X server from 10.5.8 to 10.6.4 with a clean install.
Since then it wasn't possible to make a finished BackUp with time machine. It stucks always. In the Console it listed the errors.
example.
19.09.10 11:49:41 com.apple.backupd[14514] Error: (-41) SrcErr:NO Copying /Volumes/RAIDserver HaKa ZH/Server HK/Auftraege in Arbeit/BLESSING/F2010/Lewis_Das_komische_Manifest/Layout_Protokoll/LewisSmilie/alt/K01/alt to /Volumes/HaKa-TM (Drobo)/Backups.backupdb/raidserver/2010-09-18-022427.inProgress/8F2F98D2-2F5E- 4BE0-BD20-971BC9E4E39C/RAIDserver HaKa ZH/Server HK/Auftraege in Arbeit/BLESSING/F2010/Lewis_Das_komische_Manifest/Layout_Protokoll/LewisSmilie/alt/K01
I can manualy delete this file or folder. Then the backup runs till the next error. very often the file involved is the ".DS_Store"
First I deleted my Time Machine Volume and also delete die com.apple.timemachine.plist and make a complete new backup. This also stucks.
Then I exclude the Data Volume and the BackUp of the bootVolume (server) runs fine. On the Data Volume are 4 Sharepoints. Owner is the administror and all the ACL and access-right are the same for the subfolders.
Of these 4 SharePounts, I individually exclude them. 1 runs smoothly with 3 I have problems.
I repaired the drives with DiskUtiliy and DiskWarrior. All errors are repaired but still the backup can't finished
I also tried different issues mentioned in http://discussions.apple.com/thread.jspa?threadID=2057525
I suggest that Time Machine change the way it verify it file to backup. The Backup Volume hasn't change since the update to 10.6 (only some new files)
I am very ****** off that Time Machine does'nt finished the backup and give me a list with all the errors.
Is there a Program that is able to list file with error in the same way Time Machine verify it file.
The last option I have it that is change back from 10.6 to 10.5.
Is there a list with new features and bugs within 10.6.4?
Is their a solution?
Gérard

Gerard Dirks wrote:
Hello Pondini
I running on this machine an OS X Server 10.6. In a unofficial note is written that this server software has builtin ClamAV (http://www.apple.com/server/macosx/specs.html), but we are not using the mail services!
Ah, I'd not seen that. ClamXav is free, and about the only one recommended here to find PC viruses so you don't pass them between Windoze machines, as it's not intrusive or damaging to the OS as most other anti-virus products are.
What i hate is that i need to exclude everything which has error. On the Data Volume are hunderd tousands of File (1.8 Tb), it would take me months to sort it out which files/folders occured the errors. I repaired the drives whit different tools and now their are no errors on all drives.
Agreed, there's no point to that. It's doubtful there's really anything wrong with the files. There does appear to be something wrong with the drive or file system, though.
Are you sure the drive is compatible with Snow Leopard? A number of drives that worked fine with Leopard needed new firmware or drivers to work well with Snow Leopard. Check with the maker.
If Apple has no fix in the next 10 days I will switch back to 10.5.8 server (and leave all that buggy new features for other people wo want to be experimental users for the staff of Apple)
You're not talking to Apple here -- this is a user-to-user forum.
Post your feedback here: http://www.apple.com/feedback/server.html
Or, much better, call AppleCare, via the Contact link at the bottom of this page.

Nokia lumia 625 - losees date & time settings when...

Hi should my 625 lose the date & time settings when the battery goes flat - mines done it twice now only had the phone since last wednesday

Same here. Nokia Lumia 930.
When it is set to auto, while the timezone is correct, the phone shows wrong date/time.
I set it to manual and to my surprise, date/time changed on reboot.

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Date and Time Settings

I notice date and time settings on some of my iBooks do not hold,but some do...Is there a difference in say the 300 vs the 366/466 or is it just whether or not their battery is good or not, or if they have airport cards and 'set date/time automatically' on?...I read a past post, but not really that clear...Can someone clarify.
Thanks, Rick

PRAM contains the following information:
Mac OS X
Mac OS 9
The iBook should remember which Airport to connect to regardless.
regards
mrtotes

What is the default time settings in Process chains

Hi,
What is the default time settings in Process chains.
How to set time settings for daily,weekly,monthly loads in Process chains.
What is the time settings that we have to take care when creating meta chains.
Thanks,
Madhu.

Hi Madhu,
The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
Thanks and Regards
Subray Hegde

RV 120W: Simple Bug in Time Settings

Similar Messages

Maybe you are looking for