RV 120w VPN between 2 sites, does not work for IP phones

I have 2 vlans in my network, vlan1 for data and vlan 100 for voice, when I try to set one of the ports on either RV120w to vlan 100 so I can plug a phone on it, the whole router becames part of vlan 100, how can I make my router pass-trough vlans so I can use my ip phone?

Hi All, thanks for your responses; after a long technical discussion with tech-support, we have finally agreed there is a problem with my device. I am awaiting a replacement. Thanks for your suggestions, I'll let you know if the replacement works.
thanks again,
Phil232.

Similar Messages

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

My adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

"Track Shipment" is iOS4 does not work for Canada Post tracking numbers

Not 100% sure this is the best forum to post this but couldn't find an iOS specific forum.
When an email arrives with a shipment tracking number embedded in it, iOS4 is smart enough to recognize it and turn it into a link. You click the link, select "Track Shipment" and in theory you get sent off to the appropriate shipment tracking website.
Problem is that this does not work for Canada Post tracking numbers, I get sent to the USPS tracking site instead of the Canada Post one. I assume that the number format is similar but there must be a way to distinguish between CPC tracking numbers and USPS tracking numbers (by range ?).

This has since become working in 4.0 and higher.
I noticed I now get a notes folder for each of my email accounts (ie. in my case; MobileMe gets one, Gmail gets another, and Virgin Media a yet another). And all three since accordingly correctly between Notes mailbox on iPhone 4 and it's counterpart Notes mailbox in the mac mail app under Reminders section.
Additionally, just like other main mailboxes (inbox, drafts, sent, trash, junk), they also have a "unified" box at the top in both mac and iphone, in order to view notes in all email accounts at the same time.
Hooray Apple, shame it took so long, but at least it's here now

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

GUI_DOWNLOAD does not work for background printing

Hi,
Need some help urgently.
Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
Kindly suggest.
Best Regards,
Abbasi

you can not use gui_download in background.
Try searching first, this thing has been posted a thousand times already

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachment

Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

In Robohelp 9, search does not work for some Vietnamese characters.

In Robohelp 9, search does not work for some Vietnamese characters.

I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
If you need a more immediate response, you would need to take that up with Adobe support.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (windows)

CF10 64bit Apache connector (mod_jk.so) does not work for Apache2.4.3 (win64), where can I get a module that works?
I get this error from Apache :
C:\www\Apache2.4\bin>httpd -t
httpd: Syntax error on line 741 of C:/www/Apache2.4/conf/httpd.conf: Syntax error on line 2 of C:/www/Apache2.4/conf/mod_jk.conf: Cannot load C:\\ColdFusion10\\config\\wsconfig\\1\\mod_jk.so into server: The specified procedure could not be found.
I have already tried manually extracting the pre-built mod_jk22.so from the wsconfig.jar with same results.
If I switch to Apache 2.2.22 64bit, it does work. what I need is to be able to run on Apache 2.4.

Please check out this link.
http://rob.brooks-bilson.com/index.cfm/2012/2/21/Installing-ColdFusion-10-with-Apache-on-W indows
In this link, they are configuring with Apache 2.2 only.
When we were working colfusion 9 with Linux and apache, we had the same problem, it will work when it connect to Apache 2.0 but not with Apache 2.2 version.

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

RV 120w VPN between 2 sites, does not work for IP phones

Similar Messages

Maybe you are looking for