RV_BILLING_PRINT_VIEW changed in ECC 6.0

Hi Experts
In 4.6 C the function module RV_BILLING_PRINT_VIEW , Export Parameter - KOPF-VBELN_VAUF was giving  Service invoice req number.
Now in ECC 6.0 same parameter is giving Service order Number.
And there is no change in the configuration just version is upgraded.
Can any one give the reason for change and the solution of getting the original value of Service invoice req  number.
Thanks

Use SAP Note 724354 - DP90: Information from contract instead
of sales document

Similar Messages

  • PO Changes from ECC to SRM 7.0 using PurchaseOrderChangedInformation_Out

    Hello,
    I am having an issue with sending PO changes made in ECC to SRM. When a PO is changed in ECC, I see an XML message with the sender interface name of PurchaseOrderChangedInformation_Out in namespace http://sap.com/xi/APPL/Global2 being created in ECC in SXI_MONITOR.
    However this fails in XI because there is no configuration (receiver determination) in XI to handle this sender interface. I have setup the SAP supplied SE_Services_Procurement scenario in XI.
    We are on XI 7.0 and SRM 7.0
    Has anyone faced this issue before ? Are PO changes handled through PurchaseOrderChangedInformation_Out  ? For PO creates I see a PurchaseOrderERPRequest_Out_V1 message being created in ECC and this is indeed transferred to SRM
    Thanks
    Anil

    Dear Anil,
       About SRM7.0 and XI please see url:http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=C66D0901602211DA36BB000F20DAC9EF

  • Changes in ECC 6.0 from 4.6

    Hi Experts,
    Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
    General ledger     FI     
    - post document with different document types     FI     "
    FB50"
    - display document     FI     FB03
    - reverse document     FI     FB08
    - print document     FI     F.62
    - display/change line items     FI     FBL3N
    - display balancies     FI     FS10N
    - clear account     FI     F-03
    reporting     FI     
    - P/L+B/S     FI     S_ARL_87012284
    - document journal     FI     S_ALR_87012287
    - general ledger     FI     S_ALR_87012282
    Closing     FI     
    - valuation AP and AR     FI     F.05
    - valuation G/L     FI     F.05
    - valuation bank accounts     FI     F.05
    Others     FI     
    - standard analysis     SD     MCSI
    - creating order     CO     KO01
    Master records          
    - creating account in chart of account     FI     FSP0
    - creating account in company code     FI     FSS0
    - edit financial statement     FI     OB58/FSE2
    - exchange rates     FI     S_BCE_68000174
    - open and close period     FI     S_ARL_87003642
    Accounts payable     FI     
    - create vendor     FI     FK01
    - document entry/fast entry     FI     FB10
    - post/delete invoice     FI     FBV0
    - vendor display/change line items     FI     FBL1N
    - payment run dom/foreign test also with bank     FI     F110
    - post manual outgoing payment     FI     F-53
    - post manual incoming payment     FI     F-52
    Reporting     FI     
    Accounts receivables          
    - change customer master data     FI     XD02
    - post invoice     FI     FB70
    - customer display/change line items     FI     FBL5N
    - post manual incoming payment     FI     F-28
    - dunning run     FI     F150
    Reporting     FI     
    - open items     FI     F.27
    - account statement     FI     F.27
    - customer line items     FI     

    Dear Jaffer,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • How BBPUPDVD determines vendor master change in ECC?

    Hi Experts,
    How is the vendor master change in ECC captured and what is the strategy/check that the BBPUPDVD transaction OR vendor update report uses/does in ECC to pick up the updated vendor with qualified fields for transmission?
    Qualified fields -> Purchasing block, curr change, comm method change, etc.
    For e.g, if a vendor is blocked for a P.Org today and if we either execute BBPUPDVD OR vendor update job, so how does it determine the change in vendor master in ECC?
    Thanks!
    Regards,
    Karthik

    Hello Karthik,
    just to complete what wrote Konstantin, those change documents are determined in ECC using CHANGEDOCUMENT_READ function modul inside BBP_SCAN_VD function modul which is called by RFC from SRM (report BBP_VENDOR_SYNC).
    Regards.
    Laurent.

  • Material Created/changed in ECC needs to be updated in thirdparty system

    Hi Gurus,
    I have a requirement. Please help me on this.
    We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI.
    we also needs to extend message type(Matmas not sure which one we need to consider 01,02,03,04) with additional legacy 10 fields according to the client requirement.
    Whenever a material is created/changed in ECC idoc needs to be sent to middleware and then to the thirdparty via middleware.
    Please let me know how we can handle this interface. Thanks much.
    Regards,
    Sanjay

    HI Janagar,
    I understand you are saying the solution in one word. It would be really helpful if you can expedite the solution as i am handling interfaces for the first time. Thanks much.
    Regards,
    Sanjeev

  • BAPI or ES? Any change in ECC needs to be reflected to subscribers(nonSAP)

    Here is my scenario:
    WBS elements are part of PS module of SAP. As and when there is a change in WBS element - all changes must be updated to its subscriber thrid party applications(non SAP).
    Ther were two ways I was thinking to design this scenario.
    1. Webserivce - ES has some prepacked services.
    2. Proxy ( BAPI )
    ECC -
    >           PI --->  non SAP Parties
      +                              +
    Common Rules        Party specific rules
    As the data on ECC can grow over the time - some common rules are needed  to restrict the data at ECC.
    The problems I am facing is about filtering the data. Subscribed systems have some rules which have to be applied - For example Party A just want only projects with some budget and Party B wants all projects.
    Q: I have not used ES so far - what is the best way to get all records + filtered records?
    Q: How to make changes triggered from ECC - change pointers to trigger?
    Q: If I use SOAP Adapter to get the data from ES - Can we automate the process to get triggered after change is made in ECC.
    Thanks.
    Edited by: sanju XI on Oct 7, 2010 6:36 PM

    The best way to go for this is -
    Use ABAP proxy to send changes to PI. Whenever there will be real-time change in ECC, the program will trigger a proxy message out to PI.
    Filters - You can use filter either in the receiver determination or message mapping.
    Data to 3rd party system - since it a web service, use SOAP.
    So, the zest is the below flowchart :-
    ECC (for any real-time changes, trigger ABAP proxy) -> PI (filter conditions) -> 3rd Party (SOAP).
    This way your 3rd party system will be updated with real-time changes.

  • Delta Changes in ECC 6.0 compared to R/3 4.7 - SAP MM

    Hi Guys,
    Please list me some 4-5 Delta changes made in SAP Materials Management -  ECC 6.0 compared to SAP R/3 4.7 version.
    Thanks,
    Pallu
    Edited by: Pallu Tillu on Sep 15, 2009 3:11 PM

    Hi
    see these links
    Refer this link for ECC 5.0 & 6.0:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    A similar post
    /message/1783778#1783778 [original link is broken]
    You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
    For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
    Release Notes on SAP Web Application Server 6.30
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Reward points if useful
    Regards
    Anji

  • How i can change system ECC to ERP in Solman

    Dear SAP Colleague,
    I have configured the service desk in Solman. We have ECC 6 system in the landscape.
    but i have add these system as SAP ECC system in Solman, and now when i am trying to upgrade these system for EHP4 its showing me the erro that system has to be defined as ERP system
    Please do let me know how can change these systems from ECC to ERP (node) in Solman. As I can checked in the system i am ble to delete and add these system again because these are used in some projects as well as in logical component.
    Is there any ways to change the system from ECC to ERP ?? and what will be the impact when i change it.
    Regards,
    Bhavesh

    Hi,
    If you are upgrading your ECC system to EHP4. Then  in order to download packages from MOPZ you have to register your system as ERP 6.0 in SMSY transaction in solution manager.
    Check this link https://websmp204.sap-ag.de/~sapidb/011000358700000293582009E.PDF and go to page 20. There you will find step how you can change it and It will not have any impact.
    Thanks
    Sunny

  • How to change the ECC Source system in SAP BI

    Dear Experts,
    In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
    Now in my BI system I want to change the source system from ECC Production to ECC development.
    Kindly explain me step by step to change the source system from ECC Production to ECC development.
    Regards,
    Suresh.

    Hi,
    Ask your basis team to change source system entries.
    They knows how to assign logical mappings.
    Tx - BDLS.
    Tables - RSLOGSYSMAP.
    Try this way.
    Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
    Thanks

  • Improvements and Changes in ECC 6.0 with 4.6/4.7 Version

    Hi All,
    Can any body tell me what are the Improvements and Changes made in ECC 6.0 with 4.6/4.7 Version, in Configuration, Master data, Transactions and other new functionalities.
    Please let me know the above details with reference to MM Module perspective.
    Regards,
    SAP MM

    Hi,
    Go through the documentation in the library for ECC6.0SAP ERP central componentRelease notes for ERP central component.In that check Chapter13 Material management.
    Or check the link below.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Regards,
    Rambhupal reddy

  • Wrong Price in Shopping Cart after PR Changed in ECC

    Hi All,
    I'm using SRM extended classic scenario, and i have the following scenario:
    1. Create PR in ECC using material assigned to contract (contract exist both in SRM and ECC) with quantity 8 PC. This PR document type didn't use release strategy.
    2. Transfer PR ECC to SRM using BBP_EXTREQ_TRANSFER
    3. SC created in SRM with quantity 8 PC and already assigned to the same contract
    4. Run report BBP_SC_TRANSFER_GROUPED to create PO with contract (test mode)
    5. No error message when simulate create PO
    6. Change PR quantity to 4 PC in ECC
    7. Run BBP_EXTREQ_TRANSFER in ECC
    8. Shopping cart quantity updated to 4 PC in SRM, but ITEM PRICE BECAME ZERO
    9. Run report BBP_SC_TRANSFER_GROUPED to create PO with contract (test mode)
    10. Got error message 'Enter the price or deselect the 'Invoice Expected' indicator
    When I change PR in ECC, I only change the quantity, not the valuation price. Why the price is changed to zero in shopping cart?
    Does anyone here ever face the same problem?

    problem solved. I've raised oss message and got note 1451988

  • Problem in delta changes from ECC to CRM for Customers created in CRM systm

    Dear all,
    I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
    I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
    But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
    I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
    Your suggestions are highly appreciated.
    Best regards
    Raghu ram

    Hi Shanthala,
    Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
    and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
    As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
    Kinldy help me to resolve the issue.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

  • Where the batch id changed in ECC 6.0

    Hi
    we had ecc4.6c and now upgraded it to ECC 6.0. but due to the change in
    system batch id generates 50 digit number which is more then standard
    48 digits. Can anyone help me out that how to resolve the problem? It
    affects many important reports.

    hi,MIchael
       ---one error
            there is E:j2ee/dbname changes not permitted below the parameter of j2ee/dbname.
            solution:
                      the value of j2ee/dbname  was BS2.   just now, i deleted  the value of j2ee/dbname.                 
                     the error message does not come out,now.
       ---three warns
           j2ee/scs/host
           j2ee/scs/system
          j2ee/ms/port
        solution:
                  there is not the scs in the system. but there is the ms in system.
                  why they are specified , i dont konw.
                  if  those parameter doesn't exist, would i  be going to delete those parameter.
        thanks and regards.
        chu

  • Fund Management change in ECC 6.0

    Hi,
    Could anybody give me any input regarding the change of FM module from 4.6C to ECC 6?
    I will migrate FM module to ECC 6.0, I might have to reconfigure the module again, but I have a question, how can we activate FM Module in ECC 6? It seems a lot of path is also change..
    Really appreciate if anybody could give me any insight.
    Thanks.
    Rgd,
    Lea

    Hi,
    You can see the release notes in http://help.sap.com. The paths are indeed a little bit different, but the idea is the same.
    Regards,
    Eli

  • OA vendor changes in ECC COntract from GOA

    I have created a GOA 35000003 with one vendor 11111 (VN) and released and reached ECC as Purchase Contract.
    and
    now i could view in me33k contract header -> partner details as OA 11112 and VN as 11111 o.k
    now next day vendor master team changed OA 11113 FROM OA 11112  for VN 11111.
    Now i create a SC11000012  and PO 70000003 created  for VN 11111 with OA 11112  rather than OA 11113 SINCE MY CONTRACT HAS STILL OA AS 11112.
    Any one faced this problem?
    As per business PO must created with OA 11113 rather than OA 11112 since they have changed in vendor master data.
    i could change in purchase contract but that is not good practice. ..
    as you all aware as a Business process, we are not supposed to change the purchasing contract at any cost. our changes always must be done in SRM GOA. WHAT  TO DO?
    Has any one faced this issue?
    SG :- plz try this.You can suggest any backend method (no 2 method .no problem) but without touching me32k i want to achiece .already autobos (one of our sdner )advised me do via idoc . but give more insights.take your time.hope you understand my problem. you can ask questions if you need any query on this.
    classic:- OA as well as VN both are available in SRM pulled from ECC.(both are same number range)
    now
    MY VN 11111 vendor told us that no more OA 11112 . so we set deletion flag this OA vendor 11112. (OA - 11112 ORDERING ADDRESS NO MORE LIKE ABONDONED)
    vendor may instruct us to set up OA 11113 for VN 11111 and go on.
    NOW i touch xk02 VN 11111 as OA 11113
    now i may need to touch in contract right?

    Hi SG
    there are two vendors in two different states so i do have OA and VN relationship.( really names are same but different address vendors). in one state the vendor may get tax exemption.
    so maintain VN 11111 ABC LIMITED lnc , FLORIDA and OA 11112 ABC Limited ,DALAS.
    NOW i scraped the operation in DALAS , i started new address vendor company in NEWYORK 11113 OA.
    so now VN 11111 ABC LIMITED lnc , FLORIDA  and OA as 11113 ABC Limited , NEWYORK.
    I set deletion flag for 11112 and removed form VN 11111 and new data is IN XK03.
    VN 11111 and OA 11113 .
    SO i need to change the same in contract to other wise my contract always pointing to OA 11112 ABC Limited .DALAS into OA 11113 ABC Limited NEWYORK.
    yes. i do have a OA in SRM side too.
    i dont have separate number range for OA and VN.
    rule:- The contract still pointing to old OA only.contract has VN as well as OA too.
    in SRM , while creating a GOA , i use only VN as my vendor.
    since i am in classic, GOA is not my source of supply. purchasing contract only my sos.
    I need to know the trick to change the OA without touching ME32K.
    PS:- i leanrt and confirmed  from SAP MM experts if i change OA vendor for VN vendor in Vendor master , we need to manualy change the contract  partner details too...
    IN THE MEAN TIME I HAVE SET DELETION TO TO MY OA VENDOR 11112 DALAS TOO
    I also tried to change some piece of data in GOA like some text added and approved and the same contract. no changes on partner data VIA WEB.
    You can ask if you have any questins
    BLOARD
    e1edka1 lf
    e1edka1 ez
    WRF02K- GPARN /GPARVW attack? THROW SOME LIGHT
    SAP suggest 11111 in BP create ONE MORE ADDRESS OA like NEWYORK as OA and Standard address  as FLORIDA  and select the the NEWYORK address and distribute the GOA again. but business did not agree..due to some tax and etc.
    I tried all the possible ways.
    Muthu

Maybe you are looking for