RV042 cannot view web configuration

Hi,
Yesterday I have purchased a new rv042 router,
If i enter http://192.168.1.1 I have access to a menu but nothing is shown when I follow the menu link........
pls help me

Hi Moideen koya Ammam veettil,
Did you try with the advice of tekliu? I mean, use https instead of http and clear the cache?.
If this did not work.
Send a ping from your computer to the router to verify the cable connection is not the problem.If the ping fails, check the cable, or disable the firewall, you can also try to access from another pc.
If you have any proxy enabled, disable it would be a good idea at the time that you enter the GUI.
And finally, Did you try to reset your device?
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered. Rate helpful posts.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer.

Similar Messages

SPA122 cannot access web configuration utility

The new SPA122 device connected to router through DHCP.
I can see IP-address on router's web page, can ping it, and receive it with ****110# IVR command.
But I cannot access web configuration utility in the browser: the page is unavailible. I tried to allow WAN access with ****7932#1#1 IVR action - the problrem still on.
Can You give me any advice what to do.

You can also connect to the lan/ethernet side of the device, do an ipconfig /renew
You should get an address on the 192.168.15 network, the default for the router in the ATA is 192.168.15.1
Then you can set up the non default password, enable the wan web server (administration tab I think).
dlm...

Cannot view web with iphone.....HELP!

iphone is recognizing new wireless in home but cannot surf web,keep getting messageperation could not be completed.(POSIX error 12- Cannot allocate memory)..............Any insight would be much appreciated,thanks

anyone???

Cannot view web server logs in Server Admin

It has been a terrible day.
First, the interesting part:
I woke up to find that 25 sites that are hosted on an XServe G5 running OS X Server 10.3.9 had been defaced. As the part-time, unpaid admin of this server, it was my responsibility to track down the vulnerability in the system and restore the defaced files from backups. The hacker had replaced the index.html file for each of the sites with his own, special version, in which he proudly declared that my server had been owned. I did a Nessus scan of the server and came up with nothing. I pulled what was left of my hair out looking for every vulnerability I could come up with, and still nothing.
I then decided to use Google to get more information about him, using the name he proudly posted on the defaced sites, and was able to get his IM address. I proceeded to have an awkwardly pleasant conversation with him, in which he declared that he has discovered a new vulnerability and decided to try it out on my machine for the challenge. He apologized, but would not reveal the vulnerability (although he hinted that it had something to do with mod_security). He also promised to leave my machine alone now ....
(Now for the not so interesting part, and the nature of my current problem)
Anyway, I did what I could to clean up the mess, and wound up viewing the access logs in the Console app via ARD. That led me nowhere, so I decided to call it a night and logged out of ARD. A few minutes later, I thought I would log into ServerAdmin and take another look at those logs, but alas, they could no longer be viewed through ServerAdmin! The log section is empty. I ssh'd into the machine to see if he had broken his promise and messed around some more, but the logs still existed where they had always been. I ran tail -f on them to make sure they are still being updated, and they are.
So after all that, it seems my big problem at the moment is viewing logs in ServerAdmin. I did not make any changes to httpd.conf (outside of disabling mod_security, which commented out the appropriate LoadModule and AddModule lines). I also disabled a few other unnecessary mods earlier in the evening via ServerAdmin, but I doubt that any particular mod controls whether or not I can view log files in ServerAdmin.
I apologize for the length of this post, but it has been quite a day. If anyone can provide any clues as to either the location of error logs for the ServerAdmin app or any sort of known resolution to this issue, I would name my first born after you.
Thanks.
XServe G5 Mac OS X (10.3.9)

skvaish1 wrote:
What purpose you will solve by loading the web server logs into the database? I will not advice it. It will be much easier for you to manage these logs at file system level as well monitor these for any issues, rather than loading it into database and then running sone database job to dig into those logs for any errors. Loading logs into database will help if you need to keep them for long time (More than 1 Year time frame or for regulatory purpose), otherwise it is better for logs to keep it on file system and just get regular backups of these logs into tape.
My 2 cents
RegardsOverall, I agree but I don't understand your comment about "Loading logs into database will help if you need to keep them for long time". Even if needed for regulatory reasons, one can manage them quite nicely outside of the database.
Also to expand on this a bit for the OP .... if the need arose to use SQL to mine the logs for information that would be hard to get using the search feature of a simple text editor, one could always define an external table on an as-needed basis.

Cannot view Web Gallery video in Safari 3

I have created videos with iMovie '08 and posted them to my Web Gallery. When I try to view them all I get is the "spinning wheel" indicated that something is trying to load but never does. This occurs in Safari 3 running in Leopard with QT 7.2.1 installed. I can view them in Tiger, as well as with XP and Vista with QT 7.2 installed. Any thoughts?

Same thing here on iMac (Intel) running 10.5 and Safari 3.0.4
Works fine on my Macbook under 10.4 and Safari 2.0.4
There must be more people with this problem. QuickTime and Flash player is up to date.
Rapairing permissions is a problem in Leopard right now. Works fine with Camino and Firefox under Leopard though.

Cannot View Webi Document

HelloI am new to this product and I am having problems with viewing sample Webi documentt from my application. I have Business Oblects Enterprise XI R2 and I am using C#.netthis is the code that I am trying to run in order to view the documentsessionMgr = new SessionMgr();enterpriseSession = sessionMgr.GetSession(sessionID); tokenMgr = enterpriseSession.LogonTokenMgr;string logontoken = tokenMgr.CreateWCAToken(enterpriseSession.CMSName, 1, 100);string str = "http://localhost:8080/businessobjects/enterprise115/InfoView/scripts/opendocument.aspx?sKind=FullClient&iDocID=" + idStr + "&token=" + logontoken; Response.Redirect(str, false);My page does redirect but I get HTTP Status 404 which is "Not Found" Also when I try to access <a href="http://localhost:8080/businessobjects/enterprise115">http://localhost:8080/businessobjects/enterprise115</a>from the brouser it automatically redirects me to <a href="http://localhost:8080/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do">http://localhost:8080/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do</a>which is java path as i understand. Is my installation wrong?Please help.Thank you

You need to remove the port 8080 from your URL. This is the port that Tomcat is usually listening on.Your ASPX pages are usually found on port 80. I believe this is your problem. Try it with port 80 and it should work fine for .NET.For more help go to the "Viewers SDK" book in the Developer Library. You will find a section in there called "COM Developers Guide and API Reference" --> "Viewing Reports and Documents Using URLs" Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Help with viewing web pages

Hi, hoping someone can help. Just got the blackberry pearl 8100. I can view web pages and see pictures but I cannot view web page videos or hear music. Shouldn't I be able to view videos and stream music? Do I need to enable different browser settings?
Thanks

Thanks, I just reinstalled the program but its still not
working.....any other suggestions?

Cannot create mysites from powershell: Original XSLT List View Web Part not found

I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with.
I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web servers.
When I log into our mysitehost and click newsfeed, it will create a mysite (even though first it displays "we are sorry there was a problem creating your site")
But from powershell, whether I use $UserProfile.CreatePersonalSite() or New-SPSite, I get the following error:
Original XSLT List View Web Part not found
So far I've only found one other person with this:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2503e42c-e114-4e89-8e00-89fe70f0b154/cannot-create-sharepoint-mysite-programmatically
This is a brand new farm, created with the same scripts I created my test farm with, and same version of SharePoint. Only the service accounts are different. (Farm account has admin on the servers right now since I was setting up profile service).
Some other errors from the same correlation ID that look related:
It can't seem to find the listemplate 101
And something looks wrong with the MySiteDocumentLibrary feature
I have tried the following:
1. run psconfig.exe on each server
2. install-spfeature -AllExistingFeatures
3. looped through the directory under Features and for each called Install-SPFeature $dirname -Force
4. uninstalled and reinstalled MySiteDocumentLibrary feature
5. blew away the whole farm (removed all servers from farm, deleted all databases) and recreated it.
6. tried creating the UPA from the CentralAdmin gui.
The only real difference I can think of between the working farm and non working farm is, I installed the working farm using RTM, then as they came out added the March PU and April CU. For this farm I installed RTM and March and April, and then ran my build
farm script.
I am at a loss. What do I need to do, re-install the binaries? That's all I can think of. What I love is that our test / POC system worked fine, and now 2 weeks before go-live I'm seeing errors on the production servers I've never seen before. Using the
same scripts no less.
Feature Activation: Feature 'Fields' (ID: 'ca7bd552-10b1-4563-85b9-5ed1d39c962a') was activated
Feature Activation: Feature 'CTypes' (ID: '695b6570-a48b-4a8e-8ea5-26ea7fc1d162') was activated
No document templates uploaded for list "$Resources:core,global_onet_solutiongallery_list;" -- none found for list template "100"
Failed to find <ListTemplate> tag corresponding to ID "101", tried both onet.xml for site definition ID "0" language "1033" and global site definition. Operation failed.
No document templates uploaded for list "$Resources:core,stylelibraryList;" -- none found for list template "121".
System.Runtime.InteropServices.COMException: A user may not remove his or her own account from a site collection.<nativehr>0x81020051</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPUserCollection.UpdateMembers
Feature Activation: Feature 'MySitePersonalSite' (ID: 'f661430e-c155-438e-a7c6-c68648f1b119') was activated
Feature Activation: Activating Feature 'MySiteDocumentLibrary'
Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'MySiteDocumentLibrary'
SharePoint Foundation Upgrade MySiteDocumentLibraryFeatureReceiveraj08n INFO Creating new My Documents library
Unknown SPRequest error occurred. More information: 0x80070002
SPRequest.GetMetadataForUrl: UserPrincipalName=, AppPrincipalName= ,bstrUrl=http://contoso/personal/cbuchholz/DOCUMENTS ,METADATAFLAGS=59
System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>, StackTrace: at Microsoft.SharePoint.SPWeb.GetObjectForUrl at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.GetSPObjectFromUrl ...
<nativehr>0x80070002</nativehr><nativestack></nativestack>There is no Web named "/personal/cbuchholz/DOCUMENTS"
Possible mismatch between the reported error with code = 0x81070504 and message: "There is no Web named "/personal/cbuchholz/DOCUMENTS"." and the returned error with code 0x80070002.
Attemping to add webpart id 0F6072F2-E804-4CFD-837E-BB37332B9D1C to web http://contoso/personal/cbuchholz
Adding XsltListViewWebPart calling SPRequest::CreateListViewPart. Web part id 0F6072F2-E804-4CFD-837E-BB37332B9D1C, web http://contoso/personal/cbuchholz
Feature receiver assembly 'Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c', class 'Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryFeatureReceiver', method 'FeatureActivated' for feature 'e9c0ff81-d821-4771-8b4c-246aa7e5e9eb' threw an exception: System.InvalidOperationException: Original XSLT List View Web Part not found at Microsoft.SharePoint.Portal.UserProfiles.MySiteDocumentLibraryUtil.ReplaceListViewWebPart
Feature Activation: Threw an exception, attempting to roll back. Feature 'MySiteDocumentLibrary'
Exception in EnsureFeaturesActivatedAtSite: System.InvalidOperationException: Original XSLT List View Web Part not found
Failed to activate site-collection-scoped features for template 'SPSPERS#2' in site collection 'http://contoso/personal/cbuchholz'
Failed to apply template "SPSPERS#2" to web at URL "http://contoso/personal/cbuchholz
I've had other problems in this farm: the bug where when you add Administrators to a Search Service via the Manage Service Applications page, it removes the SPSearchDBAdmin role from the search service process account. That one did not happen in the other farm.
At least other people have that one and I could just use the farm admin instead (still troublng of course).

Ok,
Here is the problem:
When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
I searched all over and cannot find this documented anywhere.
Who do I contact to have Microsoft document this?
It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :)

My adobe docs will no longer open in Reader...when I click on them they automatically open in web browser, however, I cannot view them on the browser either...help!

All of my adobe docs now show up as white items instead of the regular red pdf doc they used to show up as. When I double click on the pdf doc, it opens in the web browser, however, I cannot view the doc from the browser either.

See http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7

Cannot view Apple Ad videos with iPhone mobile Safarion the Apple web site!

Darndest thing. All of a sudden I cannot view any of the Apple ads on the Apple site. The iPhone Safari browser actually shows the window where the video would normally appear with the "Quicktime won't play" barred circle icon in the center of it. If I click on the "play" button anyway, the Quicktime player window opens and after a few seconds I get the "This movie format is not supported." diagnostic. The apple iPhone tour video on the Apple home page begins to load, but when I hit play the screen scrambles and the phone locks up. YouTube still works fine as do some other websites with Quicktime videos. The movie size makes no difference though I first choose the "small" setting. Also strange is that when I touch another ad icon on the thumbnail strip, TWO icons highlight. I also tried looking at the older 2006 & 2007 ads and it was the same. What gives??

This has happened to me as well. Too bad no one has replied yet.

Row limit in declarative list view web part

Hi,
Imagine you are in a scenario where you develop a custom web template or a site definition. Page Layouts with web part zones are being provisioned and out of them, decoratively web part pages are being created and populated with web parts. So something like:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="XXXProjectPages" Url="$Resources:osrvcore,List_Pages_UrlName;" Path="" SetupPath="FEATURES\XXX_Intranet_PMO_PageLayouts\">

<File Url="FullPageLayout\XXXFullPageLayout.aspx" Name="Default.aspx" Type="GhostableInLibrary" IgnoreIfAlreadyExists="FALSE" ReplaceContent="TRUE" Level="Published">
<Property Name="Title" Value="Team & Collaboration" />
<Property Name="ContentType" Value="$Resources:cmscore,contenttype_page_name;" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/XXXFullPageLayout.aspx, ~SiteCollection/_catalogs/masterpage/XXXFullPageLayout.aspx" />

<View List="Lists/Announcements" BaseViewID="102" WebPartZoneID="wpZone1" WebPartOrder="2">
<![CDATA[
<WebPart xmlns="http://schemas.microsoft.com/WebPart/v2">
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.ListViewWebPart</TypeName>
<Title>Latest News</Title>
<FrameType>TitleBarOnly</FrameType>
</WebPart>
]]>
</View>
For simplicity, let's assume that we are working with instances of OOB list definitions, such as Announcements or Document Library. So far so good. And now the question...
In my understanding if you want to do something as simple as limiting the number of items returned, or specifying a custom view criteria (filter/sorting/grouping, whatever) or just remove the toolbar, you have to go as far as provisioning an ENTIRE LIST
DEFINITION, defining your custom View in it (which declares the toolbar type, row limit and View) and then reference this new View by its BaseViewID. Is that correct?
Is there really no other, simpler way, of 'provisioning' and referencing a new view, to an existing list instance, along with the
Module -> File -> View element? I see a couple of logical options:
1) I would imagine such metadata could be stored in the web part and not the actual list. i.e. the web parts sends a CAML query to the list, based on the View metadata stored in it.
2) As we know, when you Edit page and configure the View for a List View Web Part on the page, that view is stored as a new hidden view in the actual list (i.e. if you have two list view web parts that reference that list, you will have two additional hidden
views). Then why can't we provision such (hidden) view along with the List View WebPart when we declare it and create the page? It could be created on first access of the page, or during the page
provisioning.
Another option could be the XmlDefinition property of the XsltListViewWebPart, but
apparently it is being ignored. I have also tried using the 'CustomSchema' property of the ListInstance, but it totally makes no sense because:
a) You cannot define more than one view in it, i.e. you have to override the OOB view that comes with the definition (lol?!)
b) You are supposed to overwrite the entire list definition, instead of simply upgrading parts of it
So, let me elaborate: if I want to have a <View> (ListViewWebPart) in my Page and this view to have some custom criteria, I have to provision an entire List Definition, is that correct? This is crazy.

Hi Hristo,
According to your description, my understanding is that you want to know if you can use <view> tag in the list view web part to define the row limit of list view web part.
Per my knowledge, you can define rowlimit element in the view element for list view web part directly not necessary to modify the entire list definition.
View Element:
http://msdn.microsoft.com/en-us/library/office/ms438338(v=office.15).aspx
Also, if you want to do more customization, you can still orverride the xslt.
More reference:
http://www.glynblogs.com/2011/04/overriding-the-presentation-of-an-xslt-list-view-web-part.html
http://unorig.com/2012/08/15/format-a-list-web-part-with-xslt/
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Everything works except viewing a report *in* the Report Viewer web part

Hello!
I'm having an issue with the SharePoint 2007 PIK where the following works fine...
1. Adding the Document List to the web page and clicking a report to view it in a new browser window
2. Adding a Document View web part and pointing it to a Document on the BOE server repository views fine in the Doc View web part
However, when I try to use the Crystal Report View web part, click Edit, and Browse to select a report to view, it selects it fine but does not display it. Instead I get this error:
Report cannot be displayed because no report processing server is available. Please try again later or contact your BusinessObjects Enterprise administrator.
It setting up a connection between the Document List and Crystal Report View also gives the same error when a report is selected by the end user.
Any ideas what I can check? Do I have to install the BOEXIR2 web components on this SharePoint server too?
Right now it just has the BOE .NET SDK and SharePoint PIK. The full BOE XI R2 server that I'm calling is on another computer.
Thanks!
Horus

Ok, got this to work finally. The virtual directory steps were helpful but I still got broken links on my images.
I tried right clicking the toolbar and report images in the browser and found the URL. Then I just entered that URL in the browser. This helped a bunch since at least I had a new error to research.
Server Error in '/crystalreportviewers115' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Cannot use 'partitionResolver' unless the mode is 'StateServer' or 'SQLServer'.
Googling this lead me to a tip to add a sessionState key in my X:\Program Files\Business Objects\common\3.5\crystalreportviewers115\web.config file as follows:
<sessionState mode="SQLServer" timeout="60" allowCustomSqlDatabase="true" partitionResolverType="Microsoft.Office.Server.Administration.SqlSessionStateResolver, Microsoft.Office.Server, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
After this my buttons and images worked. I'm not sure if your config is different but as a beginner with this stuff myself hopefully this works for you.
Horus

Cannot view content of pages created with WPC

Hello everyone,
When I create a page with WPC, I can only view the content with my super admin account.
I have set read authorizations for everyone on the KM folders and for PCD with no result. The rest of the users cannot view the content. They can only view the Header or Tool bar at the top (which contains send feedback, email, rss feed, etc).
What must I do to make the content visible for everyone?
Best Regards,
David.

Hi Leo,
Thanks for the answer,
Set permission "everyone" in the folder "System Administration > Permissions > Web Page Composer", but still can not view the contents of the iview.
Another additional configuration?
Thankss
Regards.
David

Accessing the online web-configuration page

I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
401 Bad Request
cannot use wireless interface to access web.
Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page?
Thanks in advance

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

JBO-33001: Cannot find the configuration file /Procref/common/bc4j.xcfg

Migrating project from Jdev 9.031 to Jdev 10.1.2.
After the migration the app works fine on Jdev 10.1.2, but when deployed to local stand alone OC4J it throws the JBO 33001 error.
I added dependency of view to the model.
Checked the existense of bc4j.xcfg in the classes.
I also ran the ADF Runtime installer as per the recommendations.
Any suggestions.....
The complete statck trace of the error is
oracle.jbo.JboException: JBO-33001: Cannot find the configuration file /Procref/common/bc4j.xcfg in the classpath
     at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:358)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:281)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:482)
     at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:817)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:169)
     at index.jspService(_index.java:73)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
     at gov.mi.mdch.procref.MainController.processRequest(MainController.java:53)
     at gov.mi.mdch.procref.MainController.doPost(MainController.java:39)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)

This is the same problem I am having. The "Model" product contains the AppModule and it's entity and view objects.
I right-clicked on the AppModule and chose "Business Components Deployment". This created in the Resources folder a Model.bcdeploy, which contained ModelMiddleTier1.deploy and ModelCommon1.deploy.
When I went to the project properties of my "WS" project in the same workspace, in the Dependencies panel, Model.bcdeploy and its 2 .deploy files were now listed bewas now listed beneath model.jpr. There is a check mark beside model.jpr. I thought this would do it.
I then recreated the "J2EE Web Service" from class file in the WS project, and deployed to the external OC4J.
When I test the web service using OC4J's test facility, I still get the same JBO-33001 error complaining that the adfws/model/common/bc4j.xcfg file is not in the classpath.
Does something else need done to get it to be found at run time?
This is JDev 10.1.3.
Thanks for any ideas.
Morga

RV042 cannot view web configuration

Similar Messages

Maybe you are looking for