RV042 - Does it support Mode Config?

Hello,
I have a question regarding the RV042 and its IP-Sec capabilities.
Does it support "Mode Config", an IP-Sec extension.
If yes, is it documented somewhere?
Regards,
Daniel

No, the rv042 does not support mode config. That is for the cisco enterprise edition routers, with the command line configuration.

Similar Messages

Mac mini on a LCD TV which does not support interlace mode

Dear all,
I am going to buy a new Mac mini and I wish to connect it to a Samsung LCD TV 37A656A1F (serie 6.
The TV manual says that it does not support the interlace mode. I then deduce that it supports progressive mode only.
My question: Does it mean that this LCD TV model cannot be used as a monitor for a Mac mini?
Please give a help to me

All computer monitors are progressive mode displays. Therefore all computers, including the mini, are very comfortable running progressive mode. It is their natural state. It is more a problem when a computer has to run interlace mode in order to support a display. That is when there is trouble. So I think you have nothing to worry about if your Samsung runs in progressive mode.

Does UCM support dynamic page creation on contributor mode.?

Hi All,
Does UCM support dynamic page creation on contributor mode.
We want to create new pages and link it into the existing pages
is that possible?
Thanks
~Hari

You can create new secondary pages in contributor mode - you would normally do this via a dynamic list fragment though technically you could also achieve it by switching region content and creating new data files. You can then use the linz wizard to link between pages.
If you are talking about creating new primary pages and sections in your site then you would need to use something like Site Studio Manager fragment.
Tim

Firefox mac osx version does not support mac-Lion os full screen window mode. When will you bring this?

In macbook pro with lion os apple gives a full-screen-mode icon in the top right corner of the window, which will be used to open that view in different window. But firefox does not support this. Even chrome supports it.
When will you bring this feature to firefox?. Currently I am in firefox 8.0.1

No answers, but Mozilla is aware of the new release of Lion, and hopefully are working on solving some of the known issues. There are some rather formal technical discussions and reports, as mentioned in this contributors thread: [/forums/contributors/707160]

Error : Your CPU does not support long mode. Use a 32bit distribution

Hi
I was trying to Install Oracle Enterprise Linux on VM ware version 6.
My hardware is Intel 32 bit.
However while booting from the DVD im getting an error as "Your CPU does not support long mode. Use a 32bit distribution."
Please Advise
Thanks

I had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
Sorry for any confusion this may have caused.

Hostapd rt2800pci «Hardware does not support configured mode»

Hello
I am trying to use my fit-pc as a wifi access point. Here is wat lspci says about my wireless card:
lspci |grep Wireless
03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
It seems to be possible through with the mac80211 driver ( http://wireless.kernel.org/en/users/Drivers/rt2800pci )
In my hostapd.conf tell hostapd.conf to use nl80211.
Still when I do : #hostapd /etc/hostapd/hostapd.conf
I've got this message :
"Configuration file: /etc/hostapd/hostapd.conf
Hardware does not support configured mode
wlan0: IEEE 802.11 Hardware does not support configured mode (2)
Could not select hw_mode and channel. (-1)
wlan0: Unable to setup interface.
rmdir[ctrl_interface]: No such file or directory
zsh: exit 1 hostapd /etc/hostapd/hostapd.conf
Someone know if there is a particual configuration to use rt2800pci?

I had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
Sorry for any confusion this may have caused.

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--? on OEL 64 bit host for OEL 64 bitguest

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
I am using entire Oracle Stack..OEL, ORACLE VBOX
Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6 x86-64 bit) .
and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
I am struck and unsure how to proceed . I appreciate any help regarding this.
I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?

Hi
Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
Edited by: 891882 on Oct 28, 2011 1:21 PM

IGNORE this since I can not DELETE IT - Your browser does not support cookies, which are required for this web server to work in session authentication mode

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Does BPM support the JAVA config file feature.

Hi ,
Does BPM support the JAVA config file feature? like based on env(local, dev, test, stage, prod) BPM aaplication can have different values for the same property/variable using the config file. How can BPM identify its env (local, dev, test, stage, prod)
Thanks In Advance!
Sreekant

931907 wrote:
Hello Robert,
I am refering here to both C++ client and Coherence Server. Will it work in either of the cases?
Thanks,
JayHi Jay,
Coherence server: it definitely won't do anything with C++.
C++ client: for the cache store of a local cache residing within the C++ client you may be able to specify it, but it will have nothing to do with the cluster itself. I never worked with the C++ client, so I can't guarantee you can configure it that way. Look at the following page for further documentation:
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_config.htm
Best regards,
Robert

"LZPL driver does not support SAPscript! There may be no printout"

Hello Experts,
(Please note some problem alike was discussed, the answer was not really clear though
Therefore I refer to this error once again)...
Tying to print a sapcript form (label).
Label design with zebra software; copied to sapscript. (ZPL Code, thus)
Spool showing ZPL commands instead of content.
Error in spool: "LZPL driver does not support SAPscript! There may be no printout"
configuration as per TAC SPAD:
Device type : LB_ZEB (Zebra label printer IBM850)
Host Spool Access Method: direct operating system call
Print mode default printer setting
Paper tray default tray
print control selection
SLINE flag at; Flag at HEX; Control Char Seq = 0D0A
SPAGE flag at; Flag at HEX; Control Char Seq = 0D0A
|
Please advise. Thanx in advance
Raf

Aim was to print labels for goods receipt with Sapscript.
I started using device types for zebra printers assuming they were adequate for Zebra printers. This is also the usual recommendation in many ABAP chats.
But they do not work and even give the error message "LZPL driver does not support SAPscript!
I could achieve a solution this way:
1. I Used Zebra Designer for MYSAP: Design label / export label as ITF-file
helpful link:
http://www.servopack.de/support/zebra/ZDesignerSAP_RG.pdf
2. SO10 create text (Standard), any name. Upload ITF-file into it. Copy code into label text, see OMCF "maintain label text"
3. OMCF,here I used the standard config.
Alternatively to point 2 you can upload ITF-file directly into editor (step "maintain label text")
4. Maintain printer in TA SPAD.I did not maintain it (like very often recommended) as zebra-device-type. I use the ASCIIPRI-device-type. Once it was maintained I went to 3rd tab "device type" and tried different drivers --> at the end I used STNDwhich turned out to work best for my purpose.
I do write all these steps because there are a lot of solutions in the web that can drive one crazy not giving a real solution...
But at the end it is rather trivial, if you have the right hints...

The platform does not support this application, but does under other account

Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
Even when I try to run the app as administrator it keeps coming back with this warning.
Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

Quote from: JLio01 on 11-December-14, 14:49:39
1. What's your App version?
2. What's the mobo/vga/specs of your son's pc?
First of all thanks for the replies and future replies.
1.
Version 1.0.0.18
2.
My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
I do know how to add permissions to the security tab have been doing that several years for some job I had once.
I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
And in case of trying a re-install of the App anyone got an url for a new version?
Might have found it but it isn't on any MSI webpage.
I did found something on Guru3D but I'm not aloud to post external links.
Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
So a clean url would be nice so to say.
So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

SRST Version 8.0 on VG3945 IOS Version 15.1(1)T2 does it support 99XX sip phones on srst

Dear Experts,
I am wondering does SRST Version 8.0 on VG3945 IOS Version 15.1(1)T2 does it support 99XX sip phones on srst as per the sh call-manager-fallback the phone types 99XX are not included in the below list.
3945#sh call-manager-fallback
CONFIG (Version=8.0)
=====================
Version 8.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_suppo...
ip source-address 10.10.5.50 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
max-ephones 1500
max-dn 2500
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
huntstop
no huntstop channel
huntstop channel 0
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format dd-mm-yy
timezone 31 Saudi Arabia Standard Time
secondary-dialtone 9
call-forward noan 37851 timeout 60
call-forward pattern .T
transfer-pattern .T
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message primary SRST MODE
system message secondary SRST MODE
Limit number of DNs per phone:
12SP: 76
7902: 76
7905: 76
7906: 76
7910: 76
7911: 76
7912: 76
7920: 76
7921: 76
7925: 76
7931: 76
7935: 76
7936: 76
7937: 76
7940: 76
7941: 76
7941GE: 76
7942: 76
7945: 76
7960: 76
7961: 76
7961GE: 76
7962: 76
7965: 76
7970: 76
7971: 76
7975: 76
7985: 76
anl: 76
ata: 76
bri: 76
CIPC: 76
vgc-phone: 76
IP-STE: 76
6921: 76
6941: 76
6961: 76
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
configuration for SIP Phones:
voice service voip
registrar server
voice register global
max-dn 100
max-pool 42
voice register dn 1
number 23000
voice register dn 2
number 23001
voice register dn 3
number 23002
voice register pool 1
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
voice register pool 2
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
voice register pool 3
id network 10.10.6.20 mask 255.255.255.0
dtmf-relay h245-alphanumeric
codec g711alaw
does this configuration correct if anything else is need please add to it...
Thanks in advance.

Dear ,
Please check the below configuration it should be working with SIP phones
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server expires max 600 min 60
voice register global
system message SRST Active
max-dn 50
max-pool 19
voice register pool 1
id network xx.xx.xx.xx mask xx.xx.xx.xx
dtmf-relay rtp-nte cisco-rtp sip-notify
codec g711ulaw
no vad
sip-ua
registrar ipv4:yy.yy.yy.yy expires 600
On UCM SRST reference configuration for gateway
SIP Network/IP Address : yy.yy.yy.yy
SIP Port : 5060
for xx.xx.xx.xx insert the network ID
for yy.yy.yy.yy insert Gateway IP
Best Regards,

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

Dg4odbc to MySQL update errors: "does not support IS NULL in this context"

I am having a problem with 'where x is null' clauses in update statements to MySQL from 11g, using dg4odbc. Updates using the clause 'where x is null' return errors like this:
ORA-02070: database PLAZAHOST does not support IS NULL in this context
The rejected queries never get to mysql. Furthermore, I noticed that select statements with 'where x is null' show up in the mysql query log with the where clause stripped out, although correct results are returned to SQLPlus. It looks as though 'where x is null' is stripped off by dg4odbc, which subsequently applies a secondary filter to the results received from MySQL.
Note, both statements above work properly when issued from the MySQL client.
Has anybody seen this? It's a big problem for me, but I can't find any references to other people having the same problem, so I assume I've got something misconfigured -- but I don't know what.
I'm using MySQL ODBC 5.1 Driver, MySQL 5.1 Community Edition, and Oracle 11g R1 all running on a 32-bit Windows server.
Thank you -- rick
=============
here's a spool of a sample oracle session:
SQL> col descr1 for a40
SQL> select * from t1@plazahost;
id1 descr1
1 hello
2
SQL> descr t1@plazahost
Name Null? Type
id1 NUMBER(10)
descr1 VARCHAR2(255)
SQL> select * from t1@plazahost where "descr1" is null;
id1 descr1
2
SQL> update t1@plazahost set "descr1"='updated' where "descr1" is null;
update t1@plazahost set "descr1"='updated' where "descr1" is null
ERROR at line 1:
ORA-02070: database PLAZAHOST does not support IS NULL in this context
SQL> spool off
=============
here's the mysql query log snip for the oracle session:
100804 10:24:20 1637 Connect     moms_oracle@MOMS_HOST on moms
          1637 Query     SET NAMES utf8
          1637 Query     SET character_set_results = NULL
          1637 Query     SET SQL_AUTO_IS_NULL = 0
          1637 Query     set autocommit=0
          1637 Query     select database()
          1637 Query     COMMIT
          1637 Query     SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
          1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
          1637 Query     SHOW COLUMNS FROM `moms`.`t1`
          1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
          1637 Query     SHOW KEYS FROM `moms`.`T1`
          1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
          1637 Query     SHOW COLUMNS FROM `moms`.`t1`
          1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
          1637 Query     SELECT A1.`id1`,A1.`descr1` FROM `T1` A1
          1637 Query     SELECT `id1`,`descr1` FROM `T1`
100804 10:24:28 1637 Query     COMMIT
          1637 Quit
=============
here's the Oracle HS trace file for the same oracle session:
Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
Heterogeneous Agent Release
11.1.0.7.0
Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
Version 11.1.0.7.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "plazahost"
Product-Info:
Port Rls/Upd:7/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.1.0.7.0_0006, Instance:plazahost
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=110000
Entered hgolofn at 2010/08/04-10:24:19
Exiting hgolofn, rc=0 at 2010/08/04-10:24:20
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2010/08/04-10:24:20
Entered hgolgon at 2010/08/04-10:24:20
reco:0, name:moms_oracle, tflag:0
Entered hgosuec at 2010/08/04-10:24:20
Exiting hgosuec, rc=0 at 2010/08/04-10:24:20
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using moms_oracle as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2010/08/04-10:24:20
HS_FDS_CONNECT_INFO = "momsPlazaHost"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2010/08/04-10:24:20
dsn:momsPlazaHost, name:moms_oracle
optn:
##>Connect Parameters (len=43)<##
## DSN=momsPlazaHost;
#! UID=moms_oracle;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2010/08/04-10:24:20
DriverName:myodbc5.dll, DriverVer:05.01.0005
DBMS Name:MySQL, DBMS Version:5.1.35-community-log
Exiting hgocont, rc=0 at 2010/08/04-10:24:20
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 64 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2010/08/04-10:24:20
Entered hgoulcp at 2010/08/04-10:24:20
Entered hgowlst at 2010/08/04-10:24:20
Exiting hgowlst, rc=0 at 2010/08/04-10:24:20
SQLGetInfo returns ` for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
2 instance capabilities will be uploaded
capno:1991, context:0x0001ffff, add-info: 0
capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
Exiting hgoulcp, rc=0 at 2010/08/04-10:24:20
Entered hgouldt at 2010/08/04-10:24:20
0 instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2010/08/04-10:24:20
Entered hgobegn at 2010/08/04-10:24:20
tflag:0 , initial:1
hoi:0x12f03c, ttid (len 26) is ...
00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
10: 322E3130 2E333131 3531 [2.10.31151]
tbid (len 23) is ...
00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
10: 315D5B31 2E345D [1][1.4]]
TXN Capable:3, Isolation Option:0xf
Exiting hgobegn, rc=0 at 2010/08/04-10:24:20
Entered hgodtab at 2010/08/04-10:24:20
count:1
table: T1
Entered hgopcda at 2010/08/04-10:24:20
Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
Entered hgopcda at 2010/08/04-10:24:20
Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:255, sign:1, radix:10
Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
The hoada for table T1 follows...
hgodtab, line 651: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:1, WHT=6 (TABLE_DESCRIBE)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 255 255 0/ 0 0 0 0 descr1
Exiting hgodtab, rc=0 at 2010/08/04-10:24:20
Entered hgodafr, cursor id 0 at 2010/08/04-10:24:20
Exiting hgodafr, rc=0 at 2010/08/04-10:24:20
Entered hgotcis at 2010/08/04-10:24:20
Calling SQLStatistics for T1
Calling SQLColumns for moms_oracle.T1
Column "id1": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=4
Column "descr1": dtype=12, colsize=255, decdig=0, char_octet_length=255, cumulative avg row len=195
Exiting hgotcis, rc=0 at 2010/08/04-10:24:20
Entered hgopars, cursor id 1 at 2010/08/04-10:24:20
type:0
SQL text from hgopars, id=1, len=40 ...
00: 53454C45 43542041 312E6069 6431602C [SELECT A1.`id1`,]
10: 41312E60 64657363 72316020 46524F4D [A1.`descr1` FROM]
20: 20605431 60204131 [ `T1` A1]
Exiting hgopars, rc=0 at 2010/08/04-10:24:20
Entered hgoopen, cursor id 1 at 2010/08/04-10:24:20
hgoopen, line 83: NO hoada to print
Exiting hgoopen, rc=0 at 2010/08/04-10:24:20
Entered hgodscr, cursor id 1 at 2010/08/04-10:24:20
Entered hgopcda at 2010/08/04-10:24:20
Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
Entered hgopcda at 2010/08/04-10:24:20
Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
hgodscr, line 506: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
Exiting hgodscr, rc=0 at 2010/08/04-10:24:21
Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
hgoftch, line 117: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
SQLBindCol: column 1, cdatatype: -16, bflsz: 4
SQLBindCol: column 2, cdatatype: 1, bflsz: 257
2 rows fetched
Exiting hgoftch, rc=0 at 2010/08/04-10:24:21
Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
hgoftch, line 117: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
0 rows fetched
Exiting hgoftch, rc=1403 at 2010/08/04-10:24:21
Entered hgoclse, cursor id 1 at 2010/08/04-10:24:23
Exiting hgoclse, rc=0 at 2010/08/04-10:24:23
Entered hgodafr, cursor id 1 at 2010/08/04-10:24:23
Exiting hgodafr, rc=0 at 2010/08/04-10:24:23
Entered hgopars, cursor id 1 at 2010/08/04-10:24:23
type:0
SQL text from hgopars, id=1, len=31 ...
00: 53454C45 43542060 69643160 2C606465 [SELECT `id1`,`de]
10: 73637231 60204652 4F4D2060 543160 [scr1` FROM `T1`]
Exiting hgopars, rc=0 at 2010/08/04-10:24:23
Entered hgoopen, cursor id 1 at 2010/08/04-10:24:23
hgoopen, line 83: NO hoada to print
Exiting hgoopen, rc=0 at 2010/08/04-10:24:23
Entered hgodscr, cursor id 1 at 2010/08/04-10:24:23
Entered hgopcda at 2010/08/04-10:24:23
Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
Entered hgopcda at 2010/08/04-10:24:23
Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
hgodscr, line 506: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
Exiting hgodscr, rc=0 at 2010/08/04-10:24:24
Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
hgoftch, line 117: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
SQLBindCol: column 1, cdatatype: -16, bflsz: 4
SQLBindCol: column 2, cdatatype: 1, bflsz: 257
2 rows fetched
Exiting hgoftch, rc=0 at 2010/08/04-10:24:24
Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
hgoftch, line 117: Printing hoada @ 02A32DDC
MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
4 INTEGER Y 4 4 0/ 0 0 0 0 id1
12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
0 rows fetched
Exiting hgoftch, rc=1403 at 2010/08/04-10:24:24
Entered hgoclse, cursor id 1 at 2010/08/04-10:24:27
Exiting hgoclse, rc=0 at 2010/08/04-10:24:27
Entered hgodafr, cursor id 1 at 2010/08/04-10:24:27
Exiting hgodafr, rc=0 at 2010/08/04-10:24:27
Entered hgocomm at 2010/08/04-10:24:28
keepinfo:0, tflag:1
00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
10: 322E3130 2E333131 3531 [2.10.31151]
tbid (len 23) is ...
00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
10: 315D5B31 2E345D [1][1.4]]
cmt(0):
Entered hgocpctx at 2010/08/04-10:24:28
Exiting hgocpctx, rc=0 at 2010/08/04-10:24:28
Exiting hgocomm, rc=0 at 2010/08/04-10:24:28
Entered hgolgof at 2010/08/04-10:24:28
tflag:1
Exiting hgolgof, rc=0 at 2010/08/04-10:24:28
Entered hgoexit at 2010/08/04-10:24:28
Exiting hgoexit, rc=0 at 2010/08/04-10:24:28

is null statement is post processed. This means in case of a select ALL records from the remote database are fetched into the Oracle database and the is null statement is then processed locally in the Oracle db.
So thze select will work as it is handled internally in the Oracle database. This also means as But "is null" isn't sent to the foreign MySQL db the update clause will fail with ORA-02070: database PLAZAHOST does not support IS NULL in this context
You need to recode the statement or use passthrough statements.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

RV042 - Does it support Mode Config?

Similar Messages

Maybe you are looking for