RV042 doesn't receive an IP-address from my ISP on the WAN port

I have a problem with my WAN ports. I can´t obtain a ip adress from my ISP.
I´ve tried factory reset.
Upgrade to lateset firmware.
Clone MAC adress from my PC.
Nothing is working.
But when I plug the WAN port into my Old router it receives an adress directly.
When I plug the ISP connection directly into my pc or the old router it´s working as well.
I using the latest firmware:
RV0XX-v4.1.0.02-tm.bin
And My ISP has an interface with an ADSL modem SmartAX with DHCP.

Hello Ola,
You will most likely need to clone the MAC address of your PC to get this to work. The Modem is not releasing the IP address to the new Router.
Procedures for Cloning a MAC address.
•1.       Disconnect router from Modem.
•2.       Connect Computer to Modem and go to Internet.
•3.       Connect same computer to Router. (Do Not connect router to Modem, and Do not reboot modem.)
•4.       Log into the Router and clone the MAC from the Computer used in the previous step.
•5.       Plug the Router into the Modem.
If that doesnt work check to see if the modem has a selector for MDI/MDIX and switch the selector.
Hope this helps,
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

Similar Messages

  • Clients not receiving DHCP IP address from HREAP centrally Switched Guest SSID

    Hi All,
    I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.
    The dhcp pool is configured on the controller itself. The local guest clients are able to get DHCP and all works fine, the issue is only with the clients in the remote site. The Hreap APs are in connected mode. Could you please suggest what could be the problem. Below is the out of the debug client.
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Adding mobile on LWAPP AP 3c:ce:73:6d:37:00(1)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Reassociation received from mobile on AP 3c:ce:73:6d:37:00
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'Guest-ACL' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific IPv6 override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying IPv6 Interface Policy for station 10:40:f3:91:7e:24 - vlan 81, interface id 13, interface 'vlan_81'
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 3c:ce:73:6d:37:00 vapId 17 apVapId 1
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
    *apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 apfMsAssoStateInc
    *apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Idle to Associated
    *apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station:  (callerId: 49) in 28800 seconds
    *apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sending Assoc Response to station on BSSID 3c:ce:73:6d:37:00 (status 0) ApVapId 1 Slot 1
    *apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfProcessAssocReq (apf_80211.c:4672) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Associated
    *apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    *apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4183, Adding TMP rule
    *apfReceiveTask: May 24 11:35:53.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 3c:ce:73:6d:37:00, slot 1, interface = 13, QOS = 3
      ACL Id = 255, Jumbo F
    *apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006  IPv6 Vlan = 81, IPv6 intf id = 13
    *apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
    *pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    *pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sent an XID frame
    *apfMsConnTask_3: May 24 13:26:49.401: 10:40:f3:91:7e:24 Updating AID for REAP AP Client 3c:ce:73:6d:37:00 - AID ===> 1
    *apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
    *apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
    *apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station:  (callerId: 12) in 10 seconds
    *osapiBsnTimer: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
    *apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Disassociated
    *apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station:  (callerId: 45) in 10 seconds
    *osapiBsnTimer: May 24 13:29:09.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
    *apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Sent Deauthenticate to mobile on BSSID 3c:ce:73:6d:37:00 slot 1(caller apf_ms.c:4981)
    *apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsAssoStateDec
    *apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Disassociated to Idle
    *apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [3c:ce:73:6d:37:00]
    *apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Deleting mobile on AP 3c:ce:73:6d:37:00(1)
    *pemReceiveTask: May 24 13:29:09.317: 10:40:f3:91:7e:24 0.0.0.0 Removed NPU entry.

    #does the client at the remote site roams between AP that connects to different WLC?
    #type 9 is not good.
    *pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    #Does your dhcp server getting hits.
    #Also, get debug dhcp message & packet.
    #Dhcp server is not responding.
    *apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
    *apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.

  • Station is not receiving an IP address from DHCP

    Hello guys,
    I have an ASA 5505 functioning as a router to connect to the Internet. Also, it is my DHCP server for my clients, and APs. When I connect my laptop to the ASA, I get an IP address and able to configure my WLC. The APs also receives an IP address from the ASA. However, when I connect to the AP wirelessly as a wireless client, my laptop is not receiving an IP address from the DHCP which is my ASA.
    Here is my topology:
    [3602i]--------[ASA5505]--------[WLC2504]
    Here is my ASA config for my clients:
    interface Vlan12
    description *** DEFAULT GATEWAY FOR Wi-Fi GUESTS
    nameif GUESTS-if
    security-level 100
    ip address 10.2.12.1 255.255.255.0
    dhcpd address 10.2.12.100-10.2.12.131 GUESTS-if
    dhcpd dns 208.67.222.222 208.67.220.220 interface GUESTS-if
    dhcpd lease 1048575 interface GUESTS-if
    dhcpd option 3 ip 10.2.12.1 interface GUESTS-if
    dhcpd enable GUESTS-if
    Here is the WLC interface config:

    Hello jsnyder81,
    I have another question. This is still related to the same network.
    I am able to connect to the wireless network now, and receiving IP address from the ASA 5505; however, I can only ping my wireless gateway. I also don't have access to the Internet.
    When I hard wired my laptop to the ASA's switch port, I am able to browse the Internet, but not via WiFi.
    Here is the routing table that I have on the ASA:
    Gateway of last resort is 192.168.1.1 to network 0.0.0.0
    C    10.2.8.0 255.255.255.0 is directly connected, PRINTERS-if
    C    10.2.9.0 255.255.255.0 is directly connected, FIOS-if
    C    10.2.10.0 255.255.255.0 is directly connected, IP-CAMERAS-if
    C    10.2.11.0 255.255.255.0 is directly connected, WiFi-USERS-if
    C    10.2.12.0 255.255.255.0 is directly connected, GUESTS-if
    C    10.2.13.0 255.255.255.0 is directly connected, WIRED-if
    C    10.2.3.0 255.255.255.0 is directly connected, EXSi-if
    C    10.2.4.0 255.255.255.0 is directly connected, AD/NPS/CA-if
    C    10.2.5.0 255.255.255.0 is directly connected, inside
    C    10.2.6.0 255.255.255.0 is directly connected, WLC-if
    C    10.2.7.0 255.255.255.0 is directly connected, AP-if
    C    10.2.20.0 255.255.255.0 is directly connected, WIRELESS-PILOT-if
    C    10.2.21.0 255.255.255.0 is directly connected, WIRED-PILOT-if
    C    10.2.22.0 255.255.255.0 is directly connected, SERVERS-PILOT-if
    C    192.168.1.0 255.255.255.0 is directly connected, outside
    d*   0.0.0.0 0.0.0.0 [1/0] via 192.168.1.1, outside
    I also have this command:
    same-security-traffic permit inter-interface

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • HT1725 I doesn't receive pile of gems from DRAGON SLAYER (game's name)

    I doesn't receive pile of gems from DRAGON SLAYER (game's name)
    after I paid already.

    Hi JoellefromDownunder,
    Welcome to the Support Communities!
    The article below will show you how to review your account and report any issues to the iTunes Store.
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/ht2727
    Cheers,
    - Judy

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • Cannot get a DHCP address from my ISP

    I just got a WRT54G router, I managed to configured it all. I can ping any computers on the network. What I cannot do is get my DHCP address from my isp, meaning that I can't connect to internet.
    I am 100% sure that my ISP address was given by a DHCP server since that's how it was configured on my old router before it got smashed into pieces.
    I have the latest firmware upgrade for the router (version 6) and it is correctly plugged in my modem.
    What is strange is that couple of hours ago, I managed to get an address for about 15 minutes, then it dropped and I have not been able to pick a new one anymore, no matter what I do.
    Anyone can help me?

    Achnod wrote:
    Alright, but how do I do that?
    Disconnect the power cord.
    Or if its a telephony modem, hold the reset button until it reboots.

  • I just downloaded OSX maverick and now I cannot drag addresses from my contacts to the "To" box when sending emails.  How can I go back to old drag groups or addresses to the box?

    I just downloaded OSX Maverick and now I cannot drag addresses from my contacts to the "To" box when sending email.  How can I get back to dragging groups or individual contacts to emails?

    Starting to type a name and getting a list of matches is good but it's not a substitute for being able to choose twenty or thirty names from your address book and dragging them into the "To" field. Of course many contacts can be put into a group but I may want to send occasional emails to many people who don't fit any group, and there may be no need to create a group just for that email.
    If you agree please send an email to apple feedback for Maverick OS X.

  • HT1941 trying to connect time  apsule to macbook air with the ethernet cable in the WAN port the airport utility doesn't detect it

    trying to connect time  capsule to macbook air with the ethernet cable in the WAN port but the airport utility doesn't detect it but when i put it in the LAN one it does but it doesn't let me configure
    any ideas?

    Isn't it fun trying to do things without an ethernet cable direct to the computer.. Apple sell a usb to ethernet adapter cable fairly cheap.. makes life a lot easier having something to do hard connections.. or as hard as usb can manage.
    Since you have to access the TC by wireless .. press and hold the reset button on the TC for about 10sec until front led flashes rapidly.. don't worry about the ethernet cable.. leave it disconnected.
    Now click on the airport symbol and join another network. The TC should revert to its home name.. which will be a combo of Time Capsule and its MAC address. There is no wireless security and you can do the setup.

  • I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing? The output sound settings are showing as digital optical only? Any ideas :)

    I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas

    The internal switch in the audio output port is stuck.  Try inserting the earphone plug a few times.  If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
    Ciao.

  • Not receiving temp IPv6 address from router

    I have spent the day trying to get IPv6 internet connectivity working in Arch and Im failing. No matter what I do my Arch install just isnt receiving and ipv6 temp address. If I use the exact same system but boot into another OS i automatically get an IPv6 temp address and can ping 1pv6.google.com .
    If there is anything that might prevent this networking function from working Id appreciate to know what it could be. Thanks a lot.

    I wont consider this solved until auto config works but in the  mean time I have an ugly work around. I created a profile for eth0 to come up at 0.0.0.0 and I got static ipv6 working in my bridge like this
    INTERFACE="br0"
    CONNECTION="bridge"
    DESCRIPTION="Gigabit Bridge"
    POST_UP="ip -6 route add default via fe80::c851:85ff:fed0:e71f dev br0"
    BRIDGE_INTERFACES="eth0"
    IP="dhcp"
    IP6="static"
    ADDR6=(2001:470:1f07:be8:bd9a:b66d:248a:b866/64)
    Gateway6=fe80::c851:85ff:fed0:e71f
    ADDR='192.168.11.66'
    #ROUTES=('192.168.0.0/24 via 192.168.1.2')
    #GATEWAY='192.168.11.1'
    #DNS=('8.8.8.8')

  • AIM account doesn't receive any emails sent from my iPhone

    This help question is going to sound odd maybe, but here goes. I just set up an AIM account for my girlfriend so we can use iChat and her webcam. But she wants to use the email portion as well. I receive emails from her on my iPhone BUT she doesn't receive any of the emails that I send back to her from my iPhone.
    They show in the "send" box of my 3 email accounts, they are not AIM accounts btw. They are local isp accounts. If I send them from my MacBook Pro, they are received by her. If I send them from the WEB sites of my isp, she receives them.
    Why not from my iPhone???
    Any help would be appreciated.
    Steve.

    Check the outgoing SMTP server settings for the mail account on your phone and make sure that they are the same as on your laptop. You may need to use several alternative SMTP servers depending on whether you are sending mail via your home wi-fi or via 3G. Ask your ISP for the first one and your mail provider for the second. You can enter multiple SMTP servers on your phone and it will try them in turn.

  • I am trying  to update my apps but I am receiving an invalid address box. I put the correct information and the box still pops up. Can you tell me what is going on?

    I am trying to update my apps but I am receiving an invalid address box. Can anyone tell me what is going on with this box? I put my correct info in and the box continues to pop up.

    There are a number of threads about it - it looks like Apple recently updated their address validation. Some people have recorded success by :
        ensuring that their iTunes account address is exactly the same as appears on their credit card bill
        putting something in the second line of the address (including just copying the first line)
        expanding abbreviations e.g. St to Street, Ave to Avenue etc (or conversely abbreviating)
        putting apartment or suite number on the second address line

  • My phone's earphone doesn't work which was bought from USA last month,the china apple store didn't accept the free repaired,so what can i do now?

    my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the phone was bought only one month age, I was so disappointed and realized the iphone 5s is so  fragile,although I previous iphone4 which was also bought from USA 4 years age, it also fell down many times, it still works well now.  what can i do now? send it back to USA for repairing? if like that,it will take almost two month to finish the all processes,that not only waste the time spent on the way, also waste expense on the expense,the important prlblem is,  I can't use the phone during the repairing~ please give me a solution as soon as you can ,thank you very much!

    You can send it to someone you know in the US to have them take it in for service or you can get on a plane and take it there yourself. You can not ship it to Apple in the US for service.

  • TS1398 Why is it that my iPod 'connects' to a wifi network but doesn't log an IP address and can't use the internet?

    My iPod has no trouble connecting to my wifi connection, but never stops loading. The wifi bars appear at the top of the iPod, but when you get further details on the wifi network, no IP address is logged; neither is the router number or the DNS number. My iPod registers that a wifi connection exists, but it can't hook up to it to use the internet. Does anyone know what is wrong?

    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    However, I would try recovery mode firs.  It is safer.  See:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Attaching document in the Asset master data

    Hi All, If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this  in SAP? Also while doing asset transfer, how can we transfer the attached documents? Please provide

  • Large number of swf files causes Flash plugin to fail

    I'm displaying up to 700 swf files on a page as links to launch an AIR app.  These appear within a worklist with one swf for each worklist item.  This causes the Flash plugin for IE to fail.  Any ideas what causes this and how it can be addressed?  W

  • Discoverer Cacheability Rule missing?

    In the Oracle Application Server Web Cache Administrator's Guide 10g(9.0.4), Compatibility with Oracle Application Server Components section, Table 1-1, it states: "OracleAS Discoverer is closely integrated with OracleAS Web Cache to improve Discover

  • My Apple tv has connection problems. I receive not connected to internet or home sharing not on even though it is

    Apple TV is allways asking me to turn on home sharing, home sharing is allready on so I have turn it off and then turn it back on. Also it is telling me that it is not connected to the internet even though I entered my network key correctly and all m

  • EREC- Process Template

    Hi Experts, Is there a way in which i can hide the "All Activities" and display only the process template selected. There is a requirement of allowing recruiters to perform only those activities which has been mentioned as part of process template. C