RV042 download datarate issue

Hi everyone,
We currently have RV042 configured as a default gateway. It is connected to another Motorola router provided by our ISP. ISP advertised download speed is 50 Mbps down and 5 Mbps up. When I plug in directly into the ISP router, the measured speed is very close to advertised. However, when I plug in RV042 and then do speed test within the private network, or directly connected to RV042 switch, download datarate is barely 15 Mbps, measured without any other network load. Upload datarate is fine.
I tried the firmware update but it seems that my model is not V3, therefore I had to stay at firmware version 1.13.12.19-tm. I did check settings for bandwidth trottling, and even added a rule to allow all services to work at 51200 Kbps, however that did not help.
Any ideas?
Best, Alex

Hi Alex,
Did you find a solution to your problem?
I recently bought a RV042 and have a similar problem. When I connect my router to the modem (ADLS 8Mb/s) I only get 3 Mb/s throughput. But if I connect another router, or a computer directly to the modem i get full speed. I also tried to connect the RV042 after another router (basically NAT in a NAT) and then I get full speed. So my conclusion is that there is something wrong between my RV042 and my Zyxel modem.
I have the latest FW, and I have tried all the suggested tricks mentioned in the is thread, but I still can't get full speed when connecting the RV042 to the modem. I have contacted the support department of the modem, but they didn't know any issues when using CISCO routers with their modems.

Similar Messages

Problem with downloading an issue to an Android tablet

We're experiencing a problem with downloading an issue to an Android tablet.
Adobe Content Viewer on a Samsung Galaxy Tab 2 attempts to download an issue, but after about 30 seconds of downloading ACW stops and without any error message returns to the previous state showing again the Download button. The Internet connection is good. Everything also works perfectly on other tablets we tried - ASUS Transformer and a previuos generation of Galaxy Tab.
Is there any common resolution for this problem?

I may not be using the correct jargon,,,,when I click on Amazon's link for the AmazonApp store download, an Adobe box comes up, so I follow the cues I get on the screen. I don't know what else to do....my 1st step..https:/www.amazon.com/app-email you have chosen to open Amazon_Appstore-release.apk which is apk file from: https://amznadsi-a.akamaihd.net what should Firefox do with this file? Save File I click on OK Then a download box comes up, which I click on, then there is 'Finder' and 'Adobe Reader'. Adobe reader is highlighted, so I click, then OK and I get a box "Amazon_Appstore-release(9).apk" is an application which was downloaded from the Internet. Are you sure you want to open it? Cancel Open. I click Open. Then a box that says Adobe Reader could not open 'Amazon_Appstore-release(9).apk' because it is either not a supported file type or because the file was damaged (for example, it was sent as an email attachment and wasn't correctly decoded.) I am a novice with this stuff....I hope you can help me. Thanks Char

TS1702 Cannot download an issue of a subscribed magazine on news stand. The download has paused and cannot midway and every time I click on resume it asks to shut and restart the app. Done that several times. Even restarted the iPad but the problem conti

Cannot download an issue of a subscribed magazine on news stand. The download has paused and cannot midway and every time I click on resume it asks to shut and restart the app. Done that several times. Even restarted the iPad but the problem continues.

Do a search with Spotlight for ".plist" (without the quotes). In that list (should be very long) there should be a file named com.apple.itunes.plist. Delete that file by dragging it from the Spotlight list to the Trash. Don't worry if you drag the wrong file and delete it, as these are preference files that recreate themselves when you launch an application.

RESOLVED : Windows Phone – Download reporting issue related to 11/1/14 – 11/9/14 data

Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick

Update 3/22 - the below issue has been resolved.
It has come to our attention that certain Windows Phone download reporting aggregations are not matching. After investigation, we found an issue related to 11/1/14 – 11/9/14 transactions. For example, if you chose an “All
app” aggregation (6 month view) and compared it to “Monthly by app” aggregations (6 month view), the totals weren’t matching. The root cause of the issue was due to the 11/1/14 – 11/9/14 data not being considered for all of the available aggregations.
We are scheduled to fix the issue today.
If you have transactions between 11/1/14 – 11/9/14, you will see an increase in the following aggregation totals once the fix is completed:
Monthly aggregations (6 and 12 month views) by app and in-app aggregations
Cumulative downloads – app and in-app aggregations
Please note, this is strictly a download reporting issue. There is no impact to any payout reporting or payout amounts.
When the fix has been completed, I will update this post.
Thanks,
Patrick

RV042, Load Balance issue

Hello,
I'm a newbie to routers and on this discussion.
I've purchased a Linksys RV042 hoping I could connect my two ISP.
Both of them are 1/1 Mb, first is DSL second PPPoE connection.
The problem is that on system summary page it doesn't show me that second WAN is connected. Even when I trying to manually connect to Internet it doesn't help.
When this connection is in Load balance Mode, internet is very slow, sometimes it's even disconnected.
My question is:
How to configure Load Balance properly?
I've tried this page:
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
but it didn't helped.
Or maybe it's just a demo of this option and doesn't work at all?
Thanks for the reply.....

Eliviszopa,
Hi. My name is Tiya and I am one of the Cisco SMB Support Engineers. I have been eyeing your post and I would like to add a few recommendations.
From what I've gathered, you are having an initial problem with your Dual-WAN configuration, in that you are unable to have both WAN interfaces Live at the same time. I will list a few things that will help you in determining if there is an issue with your RV042's Dual-WAN configuration and connectivity.
I understand your Network Topology to be: [ISP Modem 1 & ISP Modem 2]---->RV042---->LAN Clients (PC).
First thing, we need to ensure your router it at the most current firmware version for optimal performance. The RV042 series routers are currently in their 3rd HW revision, so we also need to ensure we download the firmware that is compatible with the HW version of your RV042
To locate HW version:
Look on the bottom of your RV042.
You will find the Serial Number and MAC      address sticker.
The HW Version will be visible by the      Model Number on that sticker.
Image below has a Red Square around the      Model Number and HW version of an older RV042 as a reference. HW is indicated      with 'v' and rational number, i.e. v1.1, v2.0. Your sticker may look      slightly different, but the content will be the same:
Now that we are certain of the HW version, check the release notes below to check the best firmware version for your RV042. I have provided a link below to the RV042 Release Notes:
Firmware v 4.0.0.7 Release Notes:      http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/release/rv0xx_rn_v4-0-0-7.pdf
Firmware v 1.3312.19-tm Release Notes:      http://www.cisco.com/en/US/docs/routers/csbr/rv042/release/notes/RV042_RN_v1-3-12-19-tm.pdf
If your RV042 is using neither of the 2 firmwares, follow this link to download the correct version for your router:
http://www.cisco.com/cisco/software/type.html?mdfid=282414010&flowid=784
I would recommend you download and      'flash' your RV042 with the current compatible version of firmware to      address the possibility of software corruption.
Now, we need to reset your RV042 to factory defaults to remove any parameters previously configured and also, in essence, clear the router's memory so that we can start afresh. When this happens, your RV042 will return all settings to their default state; in other words, it will be as if you are pulling it out of the box for a new install. To do this:
Disconnect the RV042 from your network,      so that the only item the RV042 is only connected to the power outlet.
Locate the reset button on your RV042.      This will be on the front of your router and it will be recessed a bit.
Use a small tipped item; paperclips      usually work best, to hold down the reset button for 30 secs. Anytime less      will not guarantee a full reset to factory defaults.
Connect your RV042 to your PC. After      about 30 secs, ensure that you have an IP address of 192.168.1.100 on your      PC.
Now, let's test each WAN port with each of your ISP connections.
The next few steps will take us through a process that will ensure both WAN ports are working, and ultimately will help is in determining your Dual-WAN connectivity performance.
Connect one of your DSL modems to WAN1 and configure the WAN1 interface accordingly:
· DSL connections typically are UN-bridged by default; where you will see the modem is performing NAT. You will use DHCP as the WAN tupe for UN-bridged DSL connection types. This UN-bridged state can be recognized quickly in a couple of ways.
o    There is a PRIVATE IP address displayed as the WAN1 IP address, e.g. 192.168.x.x. where X is a number 0-254, 10.x.x.x where X is a number 0-254, or less commonly, 172.16.x.x where X is a number 0-254.
o    When connecting to the modem directly to your PC, you are able to reach the Internet.
o    If your DSL connection is UN-bridged, you must make sure the LAN IP Subnet of your Modem and Router are NOT the same.
o    Again, you will use DHCP as the WAN type for UN-bridged DSL connection types.
· DSL connection that is Bridged will require a PPPoE Username AND Password. This PPPoE username and password will be entered on the RV042 under the WAN type PPPoE. PPPoE connections can be quickly recognized in the same manner:
o    There is a PUBLIC IP address displayed as the WAN1 IP address AFTER correctly configuring WAN interface to use PPPoE and using correct UN/PW.
o    You are NOT able to reach the Internet when connecting your PC directly to your RV042.
· Contact your ISP to assist you in determining the bridged state of your modem to be absolutely certain.
2.     After you have properly configured WAN1 and confirmed Internet connection, configure WAN2 in the same fashion.
3.     Change Primary WAN to WAN2 by going to the following location in the RV042:
· System Management>Dual-WAN> Smart-Link Backup Primary : WAN2 (change this option)
4.     Disconnect DSL Modem from WAN1 and connect to WAN2.
5.     Power cycle the DSL Modem, RV042, and also disconnect your PC from the router as well while it is powered down.
6.     After about 5-10 sec, and in this order, power on your Modem, power on you RV042, and reconnect your PC to one of the LAN ports of your RV042
7.     After about 30-60 secs, test for Internet connectivity.
Now we will do the same for your other ISP connection.
1.     Disconnect all devices from the RV042, save your PC.
2.     Change Primary WAN to WAN1 by going to the following location in the RV042:
· System Management>Dual-WAN> Smart-Link Backup Primary : WAN1 (change this option)
3.     Connect 2nd ISP connection to WAN1 and configure according to Modem configuration, either DHCP or PPPoE.
4.     Power cycle the DSL Modem, RV042, and also disconnect your PC from the router as well while it is powered down.
5.     After about 5-10 sec, and in this order, power on your Modem, power on you RV042, and reconnect your PC to one of the LAN ports of your RV042
6.     After about 30-60 secs, test for Internet connectivity.
7.     Do the same for WAN2 using your 2nd ISP connection
At this point, we should now know for certain if both WAN Interfaces will allow Internet connectivity.
If you have problems with these steps, repost with the steps you took and the results.
If things are OK, then we will continue with configuring the router for Load Balance Mode:
1.     Navigate to System Management>Dual-WAN and change your selection from Smart-Link Backup to Load balance
2.     Configure both WAN1 and WAN2 with the configuration that correlates to the Modem connection it will receive.
3.     Connect both Modems to the correct WAN port on the RV042.
4.     Power cycle all devices; Both Modems, RV042, and PC
5.     Navigate to RV042 management page and check to see if there are IP addresses for WAN1 & WAN2 Interfaces.
If you have problems with these steps, repost with the steps you took and the results. Let us know your results.

I purchased Premiere Elements 13 a few weeks ago, it downloads without issue, but I can't open it. I get an error message that reads "Elements 13 has stopped working" HELP!!!

I purchased this online, downloaded it without issue, and it won't open. I get an error message that states "Elements 13 has stopped working"
I have removed it and redownloaded it several times, and still no luck... HELP!
When I contacted Adobe support that's all they suggested, to reinstall...

taveliben
What computer operating system?
Uninstall, free ccleaner run through, and reinstall with antivirus and firewall(s) disabled is not a bad idea. But, let us look at some other
factors before that.
1. When you try to open the program, how far do you get....Welcome Screen - clicking on Organizer or Video Editor or other?
Have you tried to open the program directly from the Adobe Premiere Elements.exe file after you have applied Run As Administrator to that file?
2. Does the problem exist with and without the antivirus and firewall(s) disabled? Are you working in a school or company network?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card driver version up to date according to the website of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed and are you running the programs as administrator?
Let us start here and then decide what next based on the details in your reply.
Besides uninstall/ccleaner/reinstall, we may next try deleting the Adobe Premiere Elements Prefs file or the whole 13 Folder in which it
exists or installing the program in a newly created user account with administrative privileges and trying to run the program from there.
But, let us rule in or out the first 4.
Any questions or need clarification on any of the above, please do not hesitate to ask.
Thank you.
ATR

FTP download speed issue

Hi,
This problem only started occurring from yesterday, but I'm getting very poor FTP download speeds.
I use a dedicated server to store my work files then download at home but I'm finding it impossible now.
Speeds no higher than 150kb/s even though I have 80mb unlimited.
If I download any test files over HTTP I get full speed, its just an FTP issue (port 54630)
I've rebooted router / reconnected etc... With no luck
Can anyone help?
Much appreciated

Are you sure you are not getting confused with Mbps (Megabits per second) and MBs (Megabytes per second)?
Megabytes are Megabits divided by eight.
So a download speed of 17Mbs equates to an actual data transfer rate of 2.125MBs (Megabytes), which is what you are getting.
Download managers usually use megabytes and not megabits, so there is nothing wrong with your connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How can I download my issues with Reader's Digest when each time a pop appears and reads " the item you tried to buy is no longer available"?

I can no longer download my purchased Reader's Digest magazine since August as it requires updating the RD app. So when i try to download the RD app a pop up appears and reads " the item you tried to buy is no longer available". What does this mean and what do I do? I have 2 pending reader's digest issues that needs to be downloaded.

I don't have an answer for you but it may help to have a look at the "More Like This" section at the far right of this page. Reading those additional threads may get you some idea of the actual issue and how to resolve it. It could be that problems were found with the app and it was temporarily pulled for some reason which may be the reason for the "the item you tried to buy is no longer available" message.

E4200 firmware 1.0.03 download bandwith issue

Greetings,
since i've upgraded to the latest firmware, i've seen my download speed drop to 70-75 mbps instead of the usual 95-98 mbps.
I currently have a cable connection (100 mb up/ 5 mb down), using a Motorola 6120 modem.
Same thing is happening with firmware 1.0.02.
Downgrading to firmware 1.0.01 fixes this issue.

Re-flashed to the latest firmware.
Performed the 30-30-30 reset.
No change what so ever, still get capped at ~70 Mbps on my 100 Mbps connection.
Tried the same with the older 1.0.01 firmware and i get 95+ Mbps downloads.
Something's wrong with this new firmware.

Trouble to download free issue on the App Store

We successfully published our multi-issue version of ffw MAG (http://itunes.apple.com/us/app/ffw-mag/id417263570?mt=8) and launched the first edition in February.
However, this month, when we uploaded the 2nd FREE issue (via bundler), although the procedure seemed to have worked perfectly, but in order to download the new issue, the customers are asked to:
"Please update your app. This issue is available for download, but requires a newer version of the app. Please update your app from the app Store".
Please, help me!

Hi, Bob
Thanks a lot!
You know where i find the drop 9?
Regards
Marcelo Raimondi
Co-Founder // Chief Creative Officer
Este documento pode incluir informação confidencial e de propriedade
restrita da EMPRESA, e apenas pode ser lido por aquele(s) ao qual o mesmo
tenha sido endereçado. Se você recebeu essa mensagem de e-mail
indevidamente, por favor, avise-nos imediatamente. Quaisquer opiniões ou
informações expressadas neste e-mail pertencem ao seu remetente e não
necessariamente coincidem com aquelas da EMPRESA. Este documento não pode
ser reproduzido, copiado, distribuído, publicado ou modificado por
terceiros, sem aprevia autorização por escrito da EMPRESA.
This document may include proprietary and confidential information of the
Company, and may only be read by those person or persons to whom it is
addressed. If you have received this e-mail message in error, please
notify us immediately. Any views or opinions expressed in this e-mail are
those of the sender and do not necessarily coincide with those of the
Company. This document may not be reproduced, copied, distributed,
published, modified or furnished to third parties, without the prior
written consent of the Company.

Update Notification Download Button Issue

Hi,
Not really sure if this should be in the General area or in the Bugs & Issues area... so please moderator(s) please move this if it needs it...
Was just informed about an update to the Flash Player ... so hit the download and ran the installer... it started to automatically download McAfee Scan Program, (which I did not, nor have I ever included for download/installation) ....
The download button on the update notifier should be pointed to the page where it asks if you want the McAfee software as well... it does not currently do this. is automatically download the installer that calls for both the McAfee and Flash Player to download and install...
This is a backhanded method to have unwanted software installed on a consumer's computer...
I recommended updating the download button to stop at the page that asks if you want the McAfee sofware as well
Just my 2 cents...

unfortunately no i didnt think to screencap this, nor had i thought to do it as it took me my surprise when it happened and i didnt think to deliberately duplicate the issue... but i can try to explain the process step by step that I personally encountered....
I rebooted my machine (well i had a stack dump and it decided it was time... gotta love windows)...
during the startup sequence the update notification window came up with a download button on it... just saying there's a flash player update and do you want to download it...
so sure hit the download button thinking it was one of those hotfixes that already downloaded and it would just apply it like it usually when say shockwave updates...
however instead it opened a "would you like to save this exe file to your computer" dialog box thru firefox and so said go for it... and it downloaded it...
i then went into windows explorer and launched it ... it started the download process of the flash player software... no problem...
then about 25% of the way through that another progress bar comes up telling me its now downloading the McAfee scanner software and i'm like 'oh hell no' and cancelled the download/installation/update process...
doing this cancellation brought me to a webpage at adobe saying that installation failed ... so i manually went to the flashplayer download page and UNCHECKED the mcafee option and then proceeded to try all over again...
it worked fine the second time doing it manually that way...
when it asked me to save this new exe file, i swear it was named exactly the same as the bundled software version ... i attempted to check but when i cancelled the original BAD install/upgrade attempt it deleted the original install/update file that i had downloaded... and it didnt send it the recycle bin either... as i checked
(same thing happened after the successful install of the non-bundled upgrade/installation ... it too vanished after it was done)
anyways... that's what happened to me... then i came here in a huff
hope this was a little helpful ... i'll be sure to fire up comtasia or some other screen capture video software next time i see that upgrade dialog box and send you a video if it happens again LOL

Download music issues...

I know it is not a network issue since I have been able to download and install apps...
Recently (February 1st) I bought the album "Made in Medina by Rachid Taha" About a week before I had purchased one song from this Album Barra Barra and couldn't download it either got the same errors....
I have been trying to download this since and I keep getting the "A network error has occurred while processing your request, Please e4nsure you have sufficient network coverage and try again" and below each track is a Network Error...
I have the latest BB 10 OS, and I am connected to my Wi-Fi at home, as I said I was able to purchase and install an application AFTER buying the album...
I sent an email to BB support and have heard NOTHING...
You should be able to use blackberry.com to download it to your PC and then use Link to move it to the mobile... This is getting ridiculous...
Steve

I paid for this on Saturday Feb 1, I still can't download the Album that I paid for, AND I still haven't heard from anyone at BB World... what kind of custom support is this...
You either ask for a refund OR go through a forum???
WTH?
Steve

Download timeout issue Flash Player 11

Can anyone explain how to get around this issue?
(Stalls at 7%, then message 'Download Timeout' at 47%)

Chris. I'm having the same problem on a new imac. When I click the above link it says
Request Timeout
The server timed out while waiting for the browser's request.
Reference #2.14f38fa8.1373815673.0
Please help. Thanks
Joe

My Take on the Reception and Slow Download Speed Issue

I seriously believe that the reception problems are a result of something that AT&T has done... Here's why. I started having issues with reception variation and very slow download performance BEFORE the release of iPhone 4 or iOS4. I went to AT&T and got a new SIM. No improvement. I complained at the Apple Store about the variable reception, and the fact that when downloading, the phone got extremely hot to the touch. Because I have been a good Apple customer, the Genius replaced the phone. No improvement. I only upgraded to iOS4 after getting the refurbed "new" phone-- the new OS hasn't really done anything for me other than shorten my battery life..... I am getting pretty tired of sitting in one physical spot, and watching my signal strength go from 5-bars 3G to 1-bar EDGE to "no service" in the span of a few minutes.... Somebody had better do something about this issue, or it's back to Sprint with the new HTC Evo 4G..... Never had reception issues with them!!

It could be a bit of a design flaw but it could also be affected by iOS4.. any phone with an ariel when hold against skin makes the signal drop period! The only reason its more news worthy is because its actully part of the case.
It certainly does need fixing but a software update could help improve it for both iphone 4 and 3G/3GS. Ive heard the older models have been suffering this too.
The reception issue didnt really bother me that much I hold it naturally in my right hand and I dont get a signal issue mainly because I noticed my finger doesnt make contact with the space between the two antennas but then if I apply a finger over the space seprating the antennas the signal does indeed drop its like the two seperated antennas cancel eachother out.
But I know having to buy a case is a bit stupid when it should work without it but for a phone that cost 500-600 why the **** wouldnt you want to protect it?
Personally I love the phone the camera is awesome especially the quality of the front facing camera it looks amazing as good as the 3 mega pixel camera on the 3GS.
The best thing though is definatly the retina display, it looks beautiful. The main thing I liked about the screen tho wasnt the shapeness and quality but the fact that I found it hard to tell the difference between the black colour of the case and the blackness of the screen especially when watching a video with the black bars on the sides of the video,the contrast ratio alone is pretty epic.

Licensing/Download/Serial Issues??

Anyone else purchase CS5.5 recently to get the free upgrade to CS6 and run into a bunch of issues? Nothing showing up in the licensing site (which is now down for "scheduled" maintenance), no order number, online chat support stating that it's a 72-hour wait to get your downloads/serial numbers, 2-hour hold for licensing support line....
And of course the weekend is upon us so I'll likely have to wait until next week to (hopefully) access the software I purchased. Kind of ridiculous. Buy an online product somewhere else and you get access as soon as you make the payment. Spend $2000 on Adobe products and get the runaround about what's going on with the order, why the delay, shoddy support/web services, etc.
Ugh. Am I the only one? Has annyone else made a purchase in the last couple of days without a hitch?

Welcome to our community
I think you are misunderstanding the purpose of this forum. You likely believe it's for discussing any old licensing or install issue with any Adobe product. Unfortunately, it's a forum where we discuss installation and licensing issues that are specific to only one of Adobe's 100+ products. Adobe Captivate.
You might click the link below, then click the drop down selector on the page that appears and choose the product that matches what you are having an issue with.
Click here to view
Best of luck to you in finding a resolution to your issue! Rick

RV042 download datarate issue

Similar Messages

Maybe you are looking for