RV042 firmware upgrade failure to 4.0.2.08-tm

Tried upgrading my firmware to 4.0.2.08-tm and now I cannot log in via the web interface. The router boots and gets out to the internet. It still allows incoming vpn connections. The login screen displays and will display an error message if I use incorrect credentials, but if I log in properly and am directed to the routers web config homepage at "192.168.1.1/default.htm", I get a 404 error message. Telnet does not work either (not sure if it's on, never used it before)
404 Not Found
The requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
As if the web pages after the login screen got removed or corrupted after the update.
SN is NKS10403247
I realize there is a newer version. Attempted the upgrade incrementally since I could not find documentation specifiying if that was required or not.
Thanks!

Dear Scott Poniatowski,
My name is Friedrich Scharzn and I work for the Cisco Small Business Support Center in Europe.
Can you please let me know which version of the RV042 you have or/and which firmware you have at the moment? If your Router is not hardware version v3, then you won;t be able to update it to 4.02.08-tm.
Many thanks,
Friedrich

Similar Messages

BEFW11S4 v.4 and Vista - firmware upgrade failures

Hello
I have had this router for about 5 years, running it with XP with no problems. Ever since I got a new laptop with Vista, the wireless connects for an hour or so and then drops out and I have to unplug the router for five seconds and re-plug in order to reconnect (my other laptop with XP doesn't have this problem).
I understand that there are compatibility issues between the BEFW11S4 v. 4 and Vista so I tried to upgrade the firmware from linksys.com and kept getting a failed message. I hard rebooted the router but holding in the restart button for 30 seconds, and the upgrade still failed. So I re-set the factory settings through the router's online admin function, re-downloaded the upgrade and still got the failed emssage (I am certain that the model & version number is correct and I'm downloading the correct firmware upgrade).
Is there anything else I can do other than a) buy a new router; b) live with teh drop-outs; c) remove Vista and go back to XP?
Thanks
Solved!
Go to Solution.

If you have any Firewall or Antivirus installed on your computer, you can disable it and after this try upgrading the firmware of your router. It if still dosent work then you can try it from some other computer and try it again.If it still the same problem then i think you can Press and hold the reset button for 1 minute...Release the reset button...Unplug the power cable from your router, wait for 1 minute and re-connect the power cable...Now again you can try upgrading the firmware of your router.

Firmware upgrade failure with zen Vision M 30

Hi Guys, new to this and need some help as it has been a few days waiting on anything sensible to come from Creative support. History. Daughter got the new creative vision M 60gig and gave old (0 months) 30 gig to Dad Smiles all round. Dad (tech support manager) loads up system software and re formats the dri've. Finds new firmware upgrade so down loads and goes through the prosess of updating. Now up to this point, unit was working fine and was seen by win xp in the 'my computers list' but is new to my computer. Selected reload firmware which erased the old and told me to install the new. I ran the downloaded .exe file (latest) and it told me it could not find a device. Spent last night looking over the web for clues. Windows media play was listed but it turns out that it was only the beta that had an issue (in any event, it would not let me remove it as it wanted to do a roll back but could only find ver to roll back to). Sent out message to creative who cam back and told me to roll back wmp (great help) and to change the permissions for USB which I did. This then caused my computer to blue screen twice (had to re boot in safe and exit to recover). Ran registry mechanic and it fixed several things but still the unit is not seen by the upgrade program. When I boot the player up, it detects it has a firmware issue and puts me in the recovery mode screen. But nothing I do gets the upgrade to work. Any one got any ideas?

I have a similar problem. I tried to upgrade my firmware. So it erased the one that was on the player, and when i try to install the new one the computer says the device isn't plugged in, even though when i plug it in the pop up menu is displayed and it says DOcked on the player and the player is charging

WET610N firmware upgrade stuck at 54%

After setting the bridge up successfully (few hiccups), I figured I should upgrade the firmware. Its stuck at 54% for an hour now. There is flashing text in red warning: Upgrade must NOT be interrupted!!
Its clearly stuck and I don't think its going to move. Any thoughts on how I should proceed.
What would happen if I pulled the plug on the upgrade?

If you wish to upgrade your WET610N’s firmware manually, you need to complete the following steps:
i. Checking the firmware version of your Bridge
ii. Downloading the firmware
iii. Performing the upgrade
iv. Reconfiguring the Bridge
QUICK TIPS:
For stable connectivity and to prevent upgrade failures, make sure that your computer is connected to the bridge using an Ethernet cable. Upgrading the firmware wirelessly may cause permanent damage to the bridge since wireless connection may be unstable during the process.
Use a different web browser if Internet Explorer doesn’t work or use a different computer to perform the upgrade.
Disable any computer firewall to ensure that the upgrade will not be disrupted.
Make sure that you have downloaded the correct firmware and version for your device to prevent technical problems that may damage the bridge.
Here is the link for upgrading the firmware of the Bridge: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=3704c49be88e46bd87bafdb1b3afd88e_4901.xml&pid=80&r...

RV042 (firmware 1.3.13.02-tm) suddenly stop working

Hi, I have set up my RV042 (firmware 1.3.13.02-tm), it works fine. Then it suddenly stop working, no Internet access whatsoever. This happens once or twice every 24 hours. This happens when the network and the PCs are stable, i.e. no changes in the configuration. When I restart the RV042 all is back to normal. Any ideas of why this happens or how I can identify the issue?

Hi pac, there wouldn't be a clear way to find out what is happening. You may want to set up an external syslog server and see if the router reports anything when it begins a failure state.
-Tom
Please mark answered for helpful posts

Safe boot required for firmware upgrades??

The two recent firmware upgrades, EFI and SMC, both required me to do a safe boot for the firmware to install. Is this normal behaviour?? Trying to do the firmware install from a normal boot results in in an installation failure.
Possibly related, the "fixed" version of Parallels crashes the Mac during the install. If I try the same install during a safeboot, it will install. However, the system will panic during a normal boot until Parallels is uninstalled.
Thoughts?? Advice??? Thanks!
-Phil

Safe Mode boot…
http://docs.info.apple.com/article.html?artnum=107393
You get updates by running Software Update (System Preferences else it's the 2nd item in the Apple menu).

Portege R400 - Firmware upgrade fails for 3G card

During the Firmwareupgrade of the embedded 3G Card(Expedite EU870D) in my Protege R400 I have a power fail. On next start I can't countinue with the upgrade. The Card don't work anymore.
The Modem and the COM Ports I can't see in the Device Manger. Is there a solution for that Mistake? Thanks for help!
Pumbkin

Why you do the firmware update?
You should do this only if the Vodafone SIM card is not working properly!
I found this info which pop ups before running a firmware upgrade!
+Cautions in the FW Update:+
+Please be sure to read this carefully before upgrading the FW.+
+1. FW Upgrade is not needed when Vodafone SIM card is working properly under customers environment. Run the FW upgrade only when Vodafone SIM card is not detected. Please note that the FW is no longer revertible to the prior state once upgraded.+
+2. This upgrade tool is applicable for the following models with built-in 3G module:+
+ Portege R400+
+ Portege R500+
+ Tecra M9+
+3. Please exit 3G communication and close the Connection Utility before running the FW upgrade.+
+4. Close all the applications before running the FW upgrade. Please DO NOT launch any application during the upgrade process.+
+5. Please make sure to use an AC adaptor to power the computer during the FW upgrade process. Power failure during the upgrade process may lead to 3G modem failures.+
+6. Please DO NOT Suspend/Hibernation/Shut Down the computer during the FW upgrade process. Doing so may lead to 3G mode+
So please firstly these points before you would try to upgrade the firmware!

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

Firmware upgrade crippled cp1025nw

LaserJet CP1025nw color: was working flawlessly
received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
ran upgrade 4/3/2012 from iMac, OS10.6.8.
got error: 'update failed'
print queue says 'printing', cp1025nw doesn't respond.
printer lights: orange triangle enclosed exclamation mark plus green semicircle
This means: fatal error, per the user manual.
manual instructs to turn off, unplug, plug-in, turn on. I did this several times.
printer lights still indicate: fatal error.
HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                  tried to print configuration page: got error 'cannot establish two-way communication with the device'
                  printer and computer are connected with USB cable, (this cable / port communicates without issue to Epson inkjet printer)
Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                  has routinely printed from this computer previously.
error message in printer queue: 'error - printing',
Dell said 'found new hardware' tried to install with HP cd-rom
                  error message said 'the hardware was not installed because the wizard cannot find the necessary software'
ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
print test page: no response from the cp1025nw
What should I try next?

Since my last post I’ve retried the same troubleshooting described before, this time just from the PC. The result is still the same. Lights on the cp1025nw indicate “fatal error”.
Does anyone know how to put this printer into ‘bootcode’ mode? I’ve read about this in some other posts about HP firmware updates trashing printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and
http://www.fixyourownprinter.com/forums/laser/63535
Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
HP: How do you start up these printers when they are just manufactured to load the firmware?

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

"firmware update failure. disk write error."

i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub. High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor. I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor. So it was moved to the first floor, on a counter. That morning the router started acting up a bit, not bringing an iphone online. It was looked at - and a couple of post cards that had been placed on top, removed. Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.
1. There is no way to look at temperature - maybe the device doesn't even know its own temp.
2. There is no fan that I can discern. Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow". Temp controlled fans is simple, well proven tech.
3. This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

RV042 firmware upgrade failure to 4.0.2.08-tm

Similar Messages

Maybe you are looking for