RV042 Firmware Version 1 does not have VLan setting enable.

Hi
I am using the RV042 whereby I had seen the firmware PDF whereby ver 3. and ver 4 firmware comes with Vlan options.
But for RV042 version 1, I do not see the Vlan under the system management sections.
Is there any way to go around it :P

If you have an older version, you can upgrade the firmware to the highest for that hardware. I would expect that vlan was in the highest v1 firmware for the rv042 as it was for the rv016 v1.

Similar Messages

I just updated my iTunes and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.

I recently moved from coldfusion 8 to coldfusion 9 but all the pages with cfgrid: is throwing the following error. Any suggestion would be of great help
coldfusion.jsp.JRunTagLibraryInfo$NoSuchAttributeException: The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
at coldfusion.jsp.JRunTagLibraryInfo.getPropertyType(JRunTagLibraryInfo.java:627)
at coldfusion.jsp.JRunTagLibraryInfo.buildTagInfo(JRunTagLibraryInfo.java:585)
at coldfusion.jsp.JRunTagLibraryInfo.getTag(JRunTagLibraryInfo.java:267)
at coldfusion.compiler.NeoTranslationContext.findTagName(NeoTranslationContext.java:346)
at coldfusion.compiler.NeoTranslationContext.isKnownTag(NeoTranslationContext.java:222)
at coldfusion.compiler.CFMLParserBase.isKnownTagName(CFMLParserBase.java:589)
at coldfusion.compiler.cfml40TokenManager.TokenLexicalActions(cfml40TokenManager.java:6704)
at coldfusion.compiler.cfml40TokenManager.getNextToken(cfml40TokenManager.java:6586)
at coldfusion.compiler.cfml40.getToken(cfml40.java:11879)
at coldfusion.compiler.CFMLParserBase.isTrivialAngleBracket(CFMLParserBase.java:707)
at coldfusion.compiler.cfml40.jj_3_1(cfml40.java:9392)
at coldfusion.compiler.cfml40.jj_3_2(cfml40.java:9460)
at coldfusion.compiler.cfml40.jj_3R_67(cfml40.java:9500)
at coldfusion.compiler.cfml40.jj_3_86(cfml40.java:8147)
at coldfusion.compiler.cfml40.jj_3R_92(cfml40.java:8584)
at coldfusion.compiler.cfml40.jj_3_85(cfml40.java:8641)
at coldfusion.compiler.cfml40.jj_2_85(cfml40.java:7619)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4215)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfelse(cfml40.java:442)
at coldfusion.compiler.cfml40.cfelseif(cfml40.java:374)
at coldfusion.compiler.cfml40.cfif(cfml40.java:314)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.start(cfml40.java:4664)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:667)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:648)
at coldfusion.compiler.NeoTranslator.parseAndTransform(NeoTranslator.java:401)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:343)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:144)
at coldfusion.runtime.TemplateClassLoader$TemplateCache$1.fetch(TemplateClassLoader.java:418 )
at coldfusion.util.LruCache.get(LruCache.java:180)
at coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(TemplateClassLoader.java :362)
at coldfusion.util.AbstractCache.fetch(AbstractCache.java:58)
at coldfusion.util.SoftCache.get_statsOff(SoftCache.java:133)
at coldfusion.util.SoftCache.get(SoftCache.java:81)
at coldfusion.runtime.TemplateClassLoader.findClass(TemplateClassLoader.java:591)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.CfmServlet.service(CfmServlet.java:201)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Thanks Vishu,
We are running Coldfusion 9 and attach is the sample code and error message.:
The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
The CFML compiler was processing:
A cfgrid tag beginning on line 39, column 18.
The error occurred in E:/Websites/DreData/sobrietytesting/main/Sobrietytesting/Admin/view_users.cfm: line 54
52 :                     hrefkey="member_id"
53 :                     bind="cfc:tabledisplay.browseAccessAcountRequests(,,,)"
54 :                     >
55 :

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Windows 8 Pro volume license version does not have "Add Features" therefore cannot install media center.

As the title describes, Windows 8 Pro installed from the Volume License ISO does not have the Add Features wizard, and as such it appears to be impossible to install the Windows Media Pack.
I've consulted with Live Chat support who cannot provide an answer to this, they simply said it should be done through "Add Features" which does not exist.
A similar thread was answered by saying install from a Retail disc and upgrade. However this is hardly a solution, paying for an additional Windows license when you already have a volume license.
Can anyone, preferably MSFT, provide a proper answer on how Windows Media Center can be install on Windows 8 Pro which is volume licensed. If it can't be done can some reason or justification be given as to why it can't be done.
Please see previous thread here: http://social.technet.microsoft.com/Forums/en-US/w8itproinstall/thread/d63b46e5-c542-4dbe-be41-c46cda440723

I would like to pile on here and say "ditto" to all of the above. you have a licensed product and they don't even support the MSFT version of a DVD player. Nah, no one EVER has to play a older technology in corporate America due to training or presentation
(A funny clip of a movie before a ppt)? Nah.
But, I'd like to add a warning to MSFT senior management. I know you want to force everyone to use YOUR cloud just like apple did to theirs. Wont' work. Some of us refuse to sign onto a web site and let you track all of our moves... some
distrust the cloud (Target anyone?) etc etc. All good points, now for the out of the park. The Harvard Business Review some years ago did a study on long term profitability of a company (you have to have a profit to stay in business). The
most highly correlated factor: Customer Sat. Sorry, but I don't see customer sat in all of these entries.
IF you made your product easier to use and NOT have to have a IT support person to move from a small workgroup to a server configuration (and PS, what in the heck to you get from a workgroup? File Replication, Remote access to outlook files as one
does via exchange? Really, every computer is in a workgoup any more, so there is ZERO value add in a workgroup on a MSFDT platform, however there is great value, even with a couple of users, in an Exchange/Windows Server Platform -- so why so you make
it so damned hard to implement one... Difficult for one to implement in an SMB environment (so lets just kill SBS) but growth from small business is where your growth is... just like IBM did before you, MSFT only appears to be listening to Fortune 500 it execs,
but I really digressed) This is just one more pain in the butt to use MSFT in the small environment. So what is the rational business decision? Yes one can pick MSFT but with Zero value add in the workgroup, why not them other guys (who may
be apple, or android or even some Linux platforms)
SO you want to continue to mil the cash cow, listen to your forums.
One more note on the STORE. Lets say you do pick a competitive product in the windows store. Have them been verified they don't contain malware like MSFT products? I believe the answer here is "NO" So this adds another layer of complexity
and security risk on the corporate problem of "How do I play a DVD on my laptop" I am sure none of you has ever played a movie on your laptop flying for business?
So, MSFT management, let me paraphrase the posts above: "WHY don't you support our business needs"
And remember, people buy to have their needs met..... (IBM Planned Sales Call)
If you don't meet small business needs, someone will... and that too is fraught with risk.
(For example of how to make computers easy to use in SMB I reference SBS, the Systems Management Interface tool in IBM Unix, or best of all, the AS/400.... something even Ellison couldn't kill, though he tried.

ADEP - Experience service trail version does not have CQ5-WCM. how can i get a trail version ?

Hi
The Trail version of ADEP - Experience Service does not have CQ5 WCM.
is that a package i have to download and install from package share ?
am really interested in getting my hands dirty on WCM
can someone help?
thanks
veesy

Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
Gray Discs are all machine specific...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710

My Z10 does not have a setting of "smart dialing"

hello, I use Blackberry Z10, mode number STL100-2, software verison 10.1.0.4181. however in the phone application,when I tap down the setting options, i could not find "smart dialing". because when the caller calls, even though it is saved on my contact book, the contact name cannot show up. I guess because I saved the number with a country code and when the caller calls the country code does not show up and thus no contact name. please tell me how to enable the "smart dialing" opition on my phone. I just could not see it on the phone setting. I am in China and my country code is 86. thanks.

The only thing I know otherwise is to backup, wipe the device, and load a fresh OS to the device.
If you need help with that, post back with the OS installed currently at Options > About
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT5127 I had one day left on my trial version of final cut pro x so decided to purchase the full version. Now I have both versions and the full version does not have any of the events or projects in it. What can I do?

Please help.

Patricl, please answer Russ's question; and fear not, deleting or installing a version of FCP X does not delete or move any of your media or projects.
If the trial was from an older version (10.0.x), there is a necessary update procedure. 10.1.x uses libraries to organize your content, and the older stuff must be converted to the new organizational scheme, but it is well worth it.

HT201263 I cannot update my iPad as my version does not have under the general setting a soft wear update section. What do I do?

Cannot update my version as no update button in the general settings set ion.

You can only update to the latest version of iOS by OTA (Over The Air) if you have iOS 5.x or later.
Since you have iOS 4.3.3 or 4.3.5 you will have to connect your device with your 30 pin dock connector to usb cable to one of your usb ports and then launch iTunes if you have installed on your computer you normally sync with.
Then, you will be prompted for an iOS update.
Or, once your device appear on the left hand side under devices select it and then a window will appear on the right hand side with several panes (tabs).
Select the Summary pane (tab) and then under the 'Version' section select 'Check for Updates'
Hope this helps
Let me know

Latest Firefox version does not have my persona on it and will not allow me to add it on. Is there a problem with this version or have I been hacked?

my wife was using another application and when she minimized this app, firefox was updating without any prompting to us, which I thought was unusual. The "new' firefox page just doesn't look right. The Norton toolbar is no longer there, and, most curious of all, our persona background, which we've used for a very long time, was not there. When I try to change the background, I cannot. I am concerned that a hacker may be impersonating firefox. Am I being paranoid or is this a common problem?

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

Touch with os 1.1.5 does not have video setting out

New ipod touch 32gb and have bought video eyewear for it. The touch is supposed to have video settings - to allow selction of "TV out" - cant find it so maybe os 1.1.5 doesnt have it. Does anyone know anything about this.?

Trying these things would narrow it down:
try the other video port.
What video card do you have?
Try another display on that same port/different port.
You are sure the video card is 100% in tip top shape?
Try the card in a different machine if available.
Other than that... I don't know if you can test remotely for the video card... perhaps, try using a utility that WILL test the video card WHILE the computer is running... therefore testing it remotely should still test the card that's in it....? I think that TechTool Pro 4 ran a couple vid tests... maybe 5 does too? There might be other soft's out there that can. Check macupdate.com.

My firefox 6 does not hava away to enable java

there is no way to enable java in firefox 6

See:
*http://www.oracle.com/technetwork/java/javase/manual-plugin-install-linux-136395.html
*https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

HT1338 Why can't I update my iPad iso 4.2 version? I go to setting and it does not have it like it should. Why does apple have to make things so freaking hard! Help!

Why can't I update my iPad iso 4.2 version? I go to setting and it does not have it like it should. Why does apple have to make things so freaking hard! Help!

If you have an original iPad 1, the latest version of iOS it can run is iOS 5. So you should be able to update no problem.
Update iTunes to the latest version (11.0.2). Then simply plug your iPad into the computer and open iTunes. Click the iPad either in the sidebar or the top navigation bar. Then attempt to update the software. If it doesn't work, please post the exact error message.
Note that it would be wise to first ensure you back up the iPad.

Asking the Bridge Team: Bridge "working color space" setting when one does not have the Suite?

Common sense tells me there is really no such thing as a
"working color space" in Bridge, because
Bridge is not an image editor, just a browser
Therefore, this may turn out to be a purely academic question; but that doesn't keep my curiosity from forcing me to ask it anyway. ;)
Is there a way to set the Bridge
"color settings" when one does not have the suite?
The only Adobe program I keep up to date is Photoshop, so I've never had the suite. My version of Photoshop is 11 (CS4) and I run updated
(not upgraded) versions of Adobe Acrobat 7.x, Illustrator 10.x and InDesign 2.x. Consequently, the Synchronize color settings command is not available to me.
It seems to me that Bridge is behaving like a proper color-managed browser (e.g. Firefox with color management enabled), in that it displays tagged image files correctly and assumes sRGB for untagged image files. This normally works fine.
But what if I wanted Bridge to assume my
Photoshop color working space for untagged images
so that it behaves the same as Photoshop? I'm just curious, as I deal with a minuscule, practically negligible amount of untagged files.
My reason for bringing it up now is that I don't recall this being explicitly mentioned in forum replies when users inquire about color settings in Bridge. A recent post regarding Version Cue in the Photoshop Macintosh forum got me thinking about this. Just wanting to make sure that I'm right in my assumption that
there is really no such thing as a
"working color space" in Bridge, because Bridge is not an image editor, just a browser.
Thanks in advance.

Hi Ramón,
Thanks for sharing the outcome of your tests. However, I may have found a bug/exception to Bridge's colour management policy!
It appears that CMYK EPS photoshop files are not colour managed in Adobe Bridge, even if they contain an embedded ICC profile.
I've tried every combination in the EPS 'Save As' dialogue box, so it doesn't seem to be an issue with file encoding. Also, Bridge doesn't rely on the low-res preview that is held within the EPS itself.
My guess is that Bridge is previewing the CMYK EPS with a Bridge-generated RGB image, but it's being displayed as monitor RGB (assigned) rather than colour managed (converted to monitor RGB). For most users the difference will be barely perceptible, but the problem became very noticeable when using Bridge to preview Newsprint CMYK images on a wide-gamut monitor (images that should have appeared muted really leapt off the screen!).
How do I report this to the Colour Police at Adobe?!?

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

RV042 Firmware Version 1 does not have VLan setting enable.

Similar Messages

Maybe you are looking for