RV042 LAN connected devices IP addresses?

On the System Summary screen in the Port Statistics table when you click on one of the Connected links the pop open window does not show the IP address of the connected device when using IPv4.  Where can I find this?
If the devices are using static IP addresses and not getting them from the DHCP server they do not show in the Client Table under DHCP Status.
If they are know MAC addreses because they have been assigned to static IPs on the DHCP setup screen they will not show up in the  Uknown MAC Addresses pop up window.

Good morning
Hi Fred, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You could use a different bowser such firefox, I.E 9.0 or higher in order to open the tab.
I hope you find this answer useful, 
**Please rate useful posts so other users can benefit from it**
Greetings, 
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

  • Finding DHCP addresses for LAN connected devices

    i am suffering from information overwhelm!
    can anyone tell me how I can find out the DHCP assigned addresses for devices that are connected to my airport extreme via wired connections to the lan?
    i have a voip box connected to the base station and i need to know it's 10.0.1.x address so that i can work with the voip company to check why that box is currently having problems.
    tia for any and all help!
    iMac G5 (PowerPC) & MacBook   Mac OS X (10.4.8)  

    You should be able to choose Logs and Statistics from
    the Base station menu and then choose the DHCP
    clients tab. That will show you all of the DHCP
    leases currently in use.
    It appears that there is a problem displaying DHCP information for wired clients.
    I discovered that if you disable the wireless (I'm only running wired clients), the Logs and Statistics tab only shows "Logs". The other tabs are not even displayed.
    When I turn the Wireless back on, the other tabs re-appear but are empty (no entries). This appears to be a bug that will hopefully be corrected in the next update
    PowerMac G5   Mac OS X (10.4.8)  
    PowerMac G5   Mac OS X (10.4.8)  

  • Why do the connected devices to the router have the smae IPV6 address?

    Hi,
    Now I meet the issue
    The operation steps on router (WRVS4400N):
    1.Set the IP mode as Dual-stack IP and then save
    2.Disable the IPV4 DHCP server
    3.Use other deivces to connect the router.
    The connected devices have the same IP address(2005:123:456:789::1),I am confused,why is it?
    please help.
    Thanks!

    Hello,
    The WRVS4400N is in fact assigning IPv6 addresses to all the devices connected to it, but the WRVS4400N does not show a table with the IPv6 addresses assigned to each device connected, it only shows the IPv4 addresses and the respective MAC address for each device. The IPv6 of the WRVS4400N is an aggregetable global unicast IPv6  address (See the image below)
    If you go to Setup > LAN you will see that you cannot modify the prefix of the IPv6 address, all you can modify is the postifx and prefix length field (As you can see in the image below).
    For more information about these fields and general IPv6 configuration,  please refer to the article IPv6 Configuration on WRVS4400N Wireless-N  Gigabit Security Routers
    The only way you have to see the IPv6 address assigned to each device connected to the WRVS4400N is to check on each device the IPv6 address assigned. The WRVS4400N does not provide this information. You can see from the below picture the IPv6 address assigned to my computer. As you can see, the WRVS4400N assign the the computer the prefix 2002:c0a8::/6. Then you can see the actual IPv6 address which is 2002:c0a8:0:b182:e6a:9b0e:cdcf.
    As you can see, the initial part (The prefix) remains the same, since these are the first 64 bits of the whole IPv6 address. The other 64 bits of the IPv6 address represents the interface ID, that is, the device that is connected to the WRVS4400N.
    I hope you find this information helpful. If you have further questions, don't hesitate to ask.
    Alejandro Moncada
    SBCD Engineer
    [email protected]

  • How to retrive ip address of connected device in shell script or applescript

    Hi all,
    From Mac PC, how to get ip address of connected device in shell script or applescript.
    there is any way to launch an app on ipad in shell script or applescript.
    thank you in advance for your help
    Mickael

    Hi all,
    From Mac PC, how to get ip address of connected device in shell script or applescript.
    there is any way to launch an app on ipad in shell script or applescript.
    thank you in advance for your help
    Mickael

  • SG200-08 Loosing MAC addresses of connected devices

    I have a SG200-08 Switch that has in the last month been acting up with certain types of traffic.  On June 7, 2013 I installed the 1.0.6.2 firmware upgrading from 1.0.5.1.  Updating the firmware has not helped. 
    Last week Tuesday a server that was connected to that switch disappeared from the network, looking at the trouble I had to reboot the server and traffic began to flow.  After rebooting the server I found only 1 of 2 MAC addresses from the 1 NIC showing up on the port.
    Today I have a Xerox Workcenter connected to the switch on another port and while working on changing settings on the device I stopping being able to reach the device, could not even ping it.  I went into the switch port showed active, but no MAC address found in the dynamic table for that port. After rebooting the switch I could reach the Xerox again.
    I rebooted the switch on Friday near the end of the day and it was doing better till this morning, all MAC addresses for connected devices were showing up OK.  Is the device defective?  It had been working OK previously, it is connected to another switch on port 1, and that shows a proper table of dynamic MAC addresses.  In both cases of loosing a device it was being used not dormant or in any kind of low power mode.

    Dear Michael,
    Thank you for reaching Small Business Support Community.
    Based on the symptoms; SG200 working fine before, it seems to work ok after reboot, and latest firmware already installed.  It seems to me like a hardware failure but still, in order to confirm, it would be a good idea to restore to factory conditions and configure it manually again.  Just in case that does not help I suggest you to contact the Small Business Support Center for further assistance;
    https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    Please let me know if there is anything I can assist you with in the meantime.
    Kind regards,
    Jeffrey Rodriguez S. .:|:.:|:.
    Cisco Customer Support Engineer
    *Please rate the Post so other will know when an answer has been found.

  • HT3728 how do I see IP addresses of connected devices to my airport extreme

    I'm trying to reuse a Net Gear N600 router I had to shelve since I installed my Airport Extreme router as an access point.  I need to see other IP addresses so I can configure the N600 IP address as 10.0.1.xxx.  The only way to make sure I don't use an already used IP address for the N600 is to see what IP addresses are used by the system.
    The only support I've found here is how to set up a distributed network using other apple airport extreme devices.
    Has anyone done/added a second non-apple router configured as an access point to an airport extreme.  If you have please let me know what you did.  I intend to have the N600 connected via ethernet cable to my airport extreme to extend both my wifi network and connected devices.
    Thanks,
    Steven

    Download the fing app on an iOS device

  • [Windows] list MAC addresses of ethernet-connected devices to AEBS?

    I have an ethernet connected device (among others) that is running headless, so I need to create a static IP ("DHCP Reservation") based on the MAC address to SSH into the device.
    This device is connected to my AEBS with an ethernet cable, and I cannot figure out where in the Airport Utility app lists MAC addresses connected by ethernet. This is very easy if it were a wirelessly connected device but it appears the Airport Utility -> Advanced -> Logging and Statistics tab -> "Logs and Statistics" only holds information of wirelessly connected devices.
    I am connecting to my AEBS with the most updated Airport Utility for Windows v5.6.1
    So, where do you find the MAC addresses listed of ethernet-connected devices using Windows Airport Utility?

    but it appears the Airport Utility -> Advanced -> Logging and Statistics tab -> "Logs and Statistics" only holds information of wirelessly connected devices.
    That would be true if the AEBS is configured in Bridge Mode.  In this case, another device....you likely call this your modem....is providing DHCP information to all connected devices. That is the device where you need to locate MAC Addresses and set up Static IP addresses.....not the AEBS.
    If your AirPort Extreme is in charge of providing DHCP services, then the window in Airport Utility will have a DHCP tab, which will display all of this information for both wired and wireless devices.  If you don't see a DHCP tab....this is yet another confirmation that the AEBS is in Bridge Mode.

  • MAC addresses of ethernet-connected devices to AEBS?

    I have an ethernet connected device (among others) that is running headless, so I need to create a static IP ("DHCP Reservation") based on the MAC address to SSH into the device.
    This device is connected to my AEBS with an ethernet cable, and I cannot figure out where in the Airport Utility app lists MAC addresses connected by ethernet. This is very easy if it were a wirelessly connected device but it appears the Airport Utility -> Advanced -> Logging and Statistics tab -> "Logs and Statistics" only holds information of wirelessly connected devices.
    I am connecting to my AEBS with the most updated Airport Utility for Windows v5.6.1

    but it appears the Airport Utility -> Advanced -> Logging and Statistics tab -> "Logs and Statistics" only holds information of wirelessly connected devices.
    That would be true if the AEBS is configured in Bridge Mode.  In this case, another device....you likely call this your modem....is providing DHCP information to all connected devices. That is the device where you need to locate MAC Addresses and set up Static IP addresses.....not the AEBS.
    If your AirPort Extreme is in charge of providing DHCP services, then the window in Airport Utility will have a DHCP tab, which will display all of this information for both wired and wireless devices.  If you don't see a DHCP tab....this is yet another confirmation that the AEBS is in Bridge Mode.

  • How can I view connected devices and their IP addresses?

    I have a TimeCapsule and I want to see a list of connected devices to my network.  I used to be able to do this with the older version 5.x of the Airport Utility, but can't seem to with the new version 6.
    Specifically, I don't want to just see wireless clients that are connected. I want to be able to see a list of the devices that are connected to the network via an Ethernet cable as well.

    You will need to install v5 utility a tool.. not use v6.. a toy.
    You can install v5 into lion.
    http://support.apple.com/kb/DL1482
    For Mountain Lion you can actually use same version above but the installer is not compatible. There are several posts with info about how to do it. It is easy .. download and use unpkg. Drag the pkg of the file you download onto the unpkg and it will create the v5 utility in your desktop.. just drag the 5.6 utility to your utility folder.

  • WRT54G can ping internet, but connected devices cannot.

    When I do a factory reset of our WRT54G router and configure it for our setup, everything works fine for a while (undetermined, random amount of time). We use it primarily for wireless access, and connect an iphone, ipad, mac, pc devices to it with no problem and can access the internet fine.
    After some period of time, all devices can still connect to the WRT54G via wireless, but cannot access the internet either by browser or ping/tracert commands. Meanwhile, the WRT54G diagnostics can successfully perform pings and tracerts to both IP address and URLs (so DNS *is* working fine)
    I connected a computer to the WRT54G via cat5 cable while the wireless devices could not access the internet, and the wired computer could *not* access the internet either. However, from the admin section of the WRT54G we could ping/tracert with no problems.
    Any ideas what causes this to drop and what we can do (other than factory reset) to fix it, and perhaps to prevent it?
    ..Rick..

    This isn't a home setup.  My wrt54G is connected to a DMZ switch which is connected to our gateway router and then out to the 100mpbs pipe.
    All of our LAN is working fine, and as I mentioned in the original post, the WRT54G can always ping an external site (both via URL and IP address), as well as being able to do a traceroute.
    When the connected devices can no longer get to the internet through the router, the router can still do the pings and traceroutes, so I conclude that there is no interruption in internet service. It stops at the WRT54G.  It always accepts wireless connections.

  • Troubleshooting page ea6900 - multiple LAN connections

    I have EA6900, guest access enabled - when I log in remotely and look at troubleshooting page, I see several connections (two subnets, mine and guest) - some are listed as wireless and some are LAN.  I see more than 5 LAN connections.
    Since the router only have 4 ethernet ports on it, how can I have more than 5 LAN connections?  Am I mis-understanding the table on the troubleshooting page?
    Also, one of the LAN connections is 0:0:0:0 - not sure I understand that one.
    This is at a seeeasonal rental property, I hid the router to keep guests from monkeying with it.  They should only have guest access via wireless.
    Can someone provide a better description of the troubleshooting page than the one-sentence blurb that comes with the router's user guide???
    Thanks

    chadster766 wrote:
    I will say that I believe I've seen wireless devices displayed in this list as a LAN connection. In any case the IP Address of the device would show as the Guest subnet.
    Yeah I can confirm what chadster said as well. I see wrongly labeled connections on my 6900 too. It works pretty good as a home based router but isn't always the best when you try to get too tricky. 

  • E3000 as an access point with an E3200 as the primary router not showing all connected devices

    I recently rewired my home with cat 6. All network and telephone comes in to the basement. While most devices in the home were converted to LAN connections a few remain WiFi connected.  The connections are as follows:
    Cable modem -> E3200 ->High Speed Switch <--> E3000.
    I purchased the E3200 to be the primary router. I'm using both 5.0 and 2.4 ghz connections. I set up my (existing) E3000 as an access point (AP) according to these instructions. I used the LAN-LAN setup so that all devices would be on the same network. Both E3200 and E3000 are at the latest firmware level. Both use the  same SSIDs, one each for 5ghz connection and a second for 2.4 ghz connection. Almost everything is working but there are a few nagging issues.
    1) A smart  phone connected wirelessly to the AP shows as a LAN connection when viewing the E3200 DHCP client list
    2) I set up a DHCP reservation for my network attached printer on the E3200.  When it connects via the AP it is not assigned the predefined IP address
    3) I can see the network attached printer on the E3000 MAC filter list but I can't see it when viewing DHCP clients or MAC wireless clients from the E3200 even though the printer is attached and working correctly.
    I can understand the reasons for issue 1 but it seems that a client attached to a wireless AP should also show as wireless to the main router.

    Well, let me know what IP addressess you have assigned to the network devices? Second if you remove the switch from the network (between E3200 and E3000) does the issue still persist... Once powercycle the whole network and then check whether it happens or not.

  • TSeries LAN connection issues across fibre link

    I have some LAN connection issues when getting dhcp or even assigning static  ip to T61 laptop.  Doesn't get dhcp ip settings dynamic and if given staitc, can't ping any system on network nor can systems ping it.  DHCP is at main site and this laptop is at remote site. Link between sites is fibre.  All other systems at remote site where is laptop get their DHCP settings as normal.  If I bring laptop from remote site to main site and plug in cable it gets DHCP normal but not at remote site, it doesnt get it, so i know the LAN adapter is good.  What is wrong?, what across WAN link it preventing it? seeing that all other systems at remote site get their settings well.  Thanks in advance.
    Message Edited by ansa on 06-01-2009 03:36 PM
    Message Edited by ansa on 06-01-2009 04:14 PM

    I was able to resolve the problem. "The following CLI commands have been added to allow devices that do not understand the controller's proxy Address Resolution Protocol (ARP) response without a minimum packet size of 60 bytes to communicate with the controller: show advanced dot11-padding, config advanced dot11-padding enable"

  • Ethernet-connected Devices and DHCP

    Hi!
    I have an ethernet-connected device (http://www.avid.com/US/products/artist-mix) which I'm having some issues with. I currently have it plugged into the primary ethernet port on my Mac Pro, with the LAN connected to the secondary ethernet port.
    Some suggestions have been to assign it a static IP to the device to avoid conflicts. Which leads me to my question:
    If the device is connected via ethernet to my Mac, is it assigned an IP address via DHCP like a device connected directly to the LAN does? Or would it remain separate from the network? If connecting it to my Mac does indeed attach it to the network via DHCP, then I will get on assigning a static IP for it.
    I realise this isn't really a Mac Pro based question, but I know there are people in this forum who can help me.
    Many thanks for any help in advance,
    Steve

    So I have the modem/router in DHCP/NAT mode, and Airport Extreme in Bridged mode.
    This would be the simplest, correct way to configure your network.
    Unless you need some special feature from the AirPort Extreme....that would require that the AirPort Extreme handle DHCP and NAT service.....like the Guest Network feature......then it would probably be best to keep things simple and leave them "as is" on your network.
    Either the modem needs to be in Bridge Mode and the AirPort Extreme handles DHCP and NAT.....or.....the modem/router handles DHCP and NAT and the AirPort Extreme is setup in Bridge Mode.
    it does not really matter which device handles DHCP and NAT as long as your feature requirements are being met on the network.
    Personally, I strongly prefer to use a simple modem....not a modem/router....and another separate router to control the network. But, your ISP may not offer that option.

  • LAN Connection Error: Panasonic DMP-BD35 Blu Ray Player

    Hello,
    My Panasonic DMP-BD35 Blu Ray player has a wired LAN connection port that is used to download firmware updates.
    When I was using a DLink WBR-2310 with Verizon DSL the system worked perfectly with the BD35 player wired to a LAN port on the DLink router. I recently switched to Verizon FiOS and now the BD35 player is wired to LAN port 2 on the FiOS wireless router.
    The BD35 is no longer able to connect to the network now that it is wired to the FiOS router. When I run the connection test an error is returned, "Cannot obtain IP Address using DHCP." However, all of my other network devices (Wii, Laptops, Desktops, Print Router, etc.) have had no problem connecting to the router, both wirelessly and wired. I have even wired a laptop to the jack that the BD35 is using and the laptop connects just fine (wireless turned off). Also, I checked the Port Configuration screen on the router and Port 2 is showing that it is connected at 100Mbps Full-Duplex when the BD35 is on, but the device does not appear on the list of devices connected on the My Network screen.
    Here are the settings on the BD35:
    - IP Address Auto Configuration (DHCP) = ON
    - DNS Auto Configuration (DHCP) = OFF
    - Auto Detect Connection Speed = ON
    Does anyone have experience with this issue? Is it possible to setup a Static IP for the BD35 in the router using the MAC Address for the BD35?
    Thank you!

    I'm not familiar with the Panasonic BD35 but I would suggest that you try it with DNS Auto Configuration turned on.
    You may also be able to set it up with a  manual address that is way out of the range of anything that you woudl normally use. 
    Try the following:
    Check the TCP/IP Address that your PC is getting.  Assuming your IP Address is set to 192.168.1.x set the Panasonic to
    IP Address: 192.168.1.200
    Subnet: 255.255.255.0
    Gateway: 192.168.1.1
    DNS: 192.168.1.1
    The Verizon STBs will use 100 to 150 and your other DHCP Devices woudl normally use the addresses between 2 and 99.
    If you still have problems try using OpenDNS and set the DNS address to 208.67.222.222.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Maybe you are looking for