RV042 - PAT not working

Hi,
I have to access different machines behind the RV042 on the ports 80 or 443.
Each machine can be reach localy on the private IP address.
So if i read it right I have to configure the UPnP feature to do the translation but it does not work:
HostA
TCP
2000
80
192.168.1.50
Enabled
HostB
TCP
2002
443
192.168.1.14
Enabled
HostC
TCP
2003
443
192.168.1.15
Enabled
UPnP table
But I still cannot connect to HostA on a web browser using " http://xxx.xxx.xxx.xxx:2000 ".
I have read severals topic on this matter and I don't understand what I am missing.
Any help would be very appreciated.
Thanks!
Solved!
Go to Solution.

What type of servers are they?
You might want to cluster them.
Another potion would be to change the servers services ports.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

  • RV042 DMZ not working fully (FW: 1.3.12.19-tm)

    Hi,
    discover this weekend an annoying bug in the DMZ for RV042 (either way DMZ with second WAN port or via config menu)
    I tried Exchange 2007 with DMZ (yes I know, should not be DMZ) receive email was fine but the OWA didn't work. Error after confirm the certification exception (looks like the certificate use the Router MAC as CN, what is strange) is:
    501 Not Implemented
    The requested method is not implemented by this server.
    Doing DMZ with the Linksys Linksys WRT54GL (FW: DD-WRT v24-sp2 (10/10/09) std - build 13064)it is working like a charm.
    so my conclusion is that the DMZ of my RV042 is not working properly.
    Can I open a support issues with Linksys/Cisco for this, so there fix it in the next fw?
    Please advise, Thanks
    Tilo

    The firmware you are trying to install is only for the newer version 3 RV042's and will
    not install on your device. You may want to try re-flashing your current firmware to see if that helps.

  • RV042 QuickVPN not working for all PCs

    So have a RV042 VPN router that is directly connected to the ethernet port of our comcast cable modem.
    If I connect to it using QuickVPN (1.4.2.1) from a PC that is connected using AT&T 3G Network it works fine!
    If I connect to it using QuickVPN (1.4.2.1) from a different PC that is connected using home WiFi (linksys wrtxxx) then it fails. In the VPN log all I see is failure messages for ping.
      2011/10/22 15:47:28 [WARNING]Failed to ping remote VPN Router!
    If I open a regular command prompt and attempt to ping the VPN router it works so not understanding why the QuickVPN is unable to ping.
    Any ideas why this is happening or how I can troubleshoot this further. Makes me think the RV042 config is fine otherwise it would not work on a 3G connection. Something on the home PC or the home network. Not sure what to check.

    So discovered following today morning.
    Moved the laptop that worked on 3G to the same wireless network where the other laptop would not work. Vola! it connects over WiFi and 3G (when tried separately by disabling the other).
    So now it makes me think not only my RV042 config is working but a client is also able to connect via WiFi and 3G. So has to be an issue with the laptop itself which does not connect. Some software is either missing from this laptop or blocking the ports.

  • SA520 NAT/PAT not working with NAT address

    The SA520 I have is configured on one public IP address and an exchange server is behind it.  THe exchange server is configured with an internal address and the SA520 is performing NAT translation to a unique public address for the email server itself which is independant of the SA520.  It seems that the SA520 is sending email out the NAT address correctly at some time and at other times it seems to be sending the email traffic over the PAT address of the SA520 public address.  When this happens the email gets blocked due to spam lists.  Then the email will work again correctly.. and then go back.  If I use a 3rd party website to test the IP address sometime I get the correct one and sometimes I get the wrong address.
    Is there a way I can confirm that the SA520 NAT settings are correct to allow ALL outbound communications from the exchange server (which is behind the SA520)?  I may have the SA520 configuration wrong and it is possible that the SA520 is only providing inbound PAT for port 25.  How do I tell the SA520 to do a 1 to 1 NAT with the exchange server?

    Hi John,
    In order to establish a 1 to 1 NAT on the SA 500 series, as in your case, you must first you must first add an IP Alias for your 2nd WAN.  Next, you create a Firewall rule to "force" all or selected traffic from your NATed server (LAN) to the WAN to go out thru the IP ALIAS address.  Finally, we forward specific traffic from the WAN to your NATed Server (LAN) thru Firewall Rule(s).  See sample wan2lan bitmaps attached. Do this for each of the services that you will allow to come in thru the SA 520 to your Server.  As long as there are no other Firewall rules overlapping with the newly created rules, traffic to and from your NATed server will come/exit thru your ALIAS IP.
    We can verify this by performing a WAN Packet Trace (Administration-->Diagnostics -->Packet Trace)  After choosing Dedicated WAN as the Network to be captured, Click on Start to perform Packet Capture.  Go to your NATed server, and perform the following, on a command prompt window Ping google.com, open a browser window and open google.com.  On a remote machine, open a web page on your server (OWA?) to test incoming HTTP/HTTPS requests. Stop your capture, and save the packet capture file by pressing the Download button.  Open file with Wireshark/Ethereal and observe the source and destination address of the packets.  They should have the ALIAS address and not the WAN IP address.
    If the above step is good, then we have to take a look as to if and why your SMTP or email services are not being routed out the ALIAS interface. Repeat capture steps as above, but this time send an outgoing email, and test an incoming email by emailing an internal account from an outside email acount (yahoo, gmail, hotmail).
    If you still have failure, and you have IPS or ProtectLink enabled, can you run the steps that failed with IPS and/or ProtectLink both disabled?
    If there are issues, you can post the captures as a personal message to me.
    I hope the above will help narrow the issue a bit.
    Best regards,
    Julio

  • Pat is not working on my asa

    Hi there. 
    I just trying to do PAT with gns3. but not working and i don't have any idea.
    (Cisco Adaptive Security Appliance Software Version 8.4(2))
    and also i figure out that there are some changes in nat configuration. i did but didn't work. 
    I cannot ping from my host 192.168.100.116 to 1.1.12.1 ~ 1.1.12.2, 8.8.8.8 
    i turn debug in R1 and i can see the icmp. 
    R1#
    *Mar  1 01:31:28.091: ICMP: echo reply sent, src 1.1.12.1, dst 10.10.10.1
    R1#
    *Mar  1 01:31:32.739: ICMP: echo reply sent, src 1.1.12.1, dst 10.10.10.1
    R1#
    And also can see xlate on ASA
    ASA-1# sh xlate
    1 in use, 9 most used
    Flags: D - DNS, i - dynamic, r - portmap, s - static, I - identity, T - twice
    ICMP PAT from inside:192.168.100.116/1 to outside:10.10.10.1/6370 flags ri idle 0:00:04 timeout 0:00:30
    ASA-1#
    This is my topology. 
    [ASA1]
    ASA-1# sh run ip
    interface GigabitEthernet0
     nameif outside
     security-level 0
     ip address 10.10.10.1 255.255.255.0
    interface GigabitEthernet1
     nameif inside
     security-level 100
     ip address 10.10.20.1 255.255.255.0
    ASA-1# sh run object network
    object network obj-192.168.100.0
     subnet 0.0.0.0 0.0.0.0
    ASA-1# conf t
    ASA-1(config)# ob
    ASA-1(config)# object net
    ASA-1(config)# object network obj-192.168.100.0
    ASA-1(config-network-object)# nat (in
    ASA-1(config-network-object)# nat (inside,ou
    ASA-1(config-network-object)# nat (inside,outside) dy
    ASA-1(config-network-object)# nat (inside,outside) dynamic inter
    ASA-1(config-network-object)# nat (inside,outside) dynamic interface
    ASA-1(config-network-object)# end
    [R4]
    interface FastEthernet0/0
     ip address 10.10.20.254 255.255.255.0
     duplex auto
     speed auto
    interface FastEthernet0/1
     ip address 192.168.100.254 255.255.255.0
     duplex auto
     speed auto
    no ip http server
    no ip http secure-server
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 10.10.20.1
    [HOST]
    ip address 192.168.100.116/24
    [R1]
    interface FastEthernet0/0
     ip address 10.10.10.254 255.255.255.0
     duplex auto
     speed auto
    interface FastEthernet0/1
     ip address 1.1.12.1 255.255.255.0
     duplex auto
     speed auto
    no ip http server
    no ip http secure-server
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
    what am i mssing ?
    please corret me. 
    Thank you in advance. 

    just reload... .. i'm still stuck in the ping. 
    changed topology more simple. but still not working. 
    Here is all what i did. 
    [ASA]
    access-list ICMP extended permit icmp any any echo-reply
    access-list ICMP extended permit icmp any any time-exceeded
    access-group ICMP in interface outside
    interface GigabitEthernet0
     description To_UP
     nameif outside
     security-level 0
     ip address 10.10.10.2 255.255.255.0
    interface GigabitEthernet1
     description To_DOWN
     nameif inside
     security-level 100
     ip address 10.10.20.1 255.255.255.0
    [R1]
    interface FastEthernet0/0
     ip address 10.10.10.1 255.255.255.0
    ip route 10.10.20.0 255.255.255.0 10.10.10.2 (I don't think i need this)
    [R4]
    interface FastEthernet0/0
     ip address 10.10.20.2 255.255.255.0
    ip route 10.10.10.0 255.255.255.0 10.10.20.1 (same as well)
    [outout tracer]
    ciscoasa# packet-tracer input inside icmp 10.10.20.1 8 0 10.10.10.1
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   10.10.10.0      255.255.255.0   outside
    Phase: 2
    Type: ACCESS-LIST
    Subtype:
    Result: DROP <---??????????????????????????
    Config:
    Implicit Rule
    Additional Information:
    Result:
    input-interface: inside
    input-status: up
    input-line-status: up
    output-interface: outside
    output-status: up
    output-line-status: up
    Action: drop
    Drop-reason: (acl-drop) Flow is denied by configured rule
    ciscoasa#
    [ASA]
    ciscoasa# show access-list
    access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096)
                alert-interval 300
    access-list ICMP; 2 elements; name hash: 0x2d2cf426
    access-list ICMP line 1 extended permit icmp any any echo-reply (hitcnt=0) 0x0b307247
    access-list ICMP line 2 extended permit icmp any any time-exceeded (hitcnt=0) 0x1e6b1395
    ciscoasa#
    I created acl and permit it
    Thank you. 

  • RV042 Load Balancing not working correctly?

    We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
    WAN1 = Telepacific T1
    1.5Mbps down and 1.5Mbps up
    WAN2 = AT&T U-Verse
    12Mbps down and 5Mbps up
    I have it set to Load Balance, Primary WAN = WAN2
    Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
    Bandwidth is set to:
    WAN1 = 1000Kbps upstream & downstream
    WAN2 = 5040Kbps upstream & 12000Kbps downstream
    It seems to pick WAN1 a lot of the time.  Do I have something setup wrong?

    Ok, so what do you recommend? To setup binding for ports important to direct over say… WAN1 (my fast access) shall I also keep the bandwidth management set up as is, example:
    For me it’s confusing because this config appears to be clear to me that has to control traffic the way I want .
    Thanks for your response.
    H Aragon
    De: jasbryan
    Enviado el: lunes, 20 de febrero de 2012 03:18 p.m.
    Para: HECTOR MANUEL ARAGON
    Asunto: - Re: RV042 Load Balancing not working correctly?
    Home
    Re: RV042 Load Balancing not working correctly?
    created by jasbryan in Small Business Routers - View the full discussion

  • RV042 Failover does not work properly in certain WAN1 signal condition

        Our RV042 has cable modem in WAN1 and ADSL in WAN2; it is set in smart link backup mode.
    In certain cases of WAN1 signal loss, RV042 seems not to detect this condition. Consequently it does not switch automatically to WAN2.
    One way to get it to switch is to disconnect WAN1 modem power (manually in situ), then WAN2 assumes as active link.
    We conclude that, in the mentioned cases, although WAN1 signal is not good enough to provide internet service, RV042 makes a wrong decision and determines WAN1 is ok.
    Is there a way to have a correct switchover for these cases?
    May be with a firmware fix, or an internal user programming/setting, or different router model- or a combination of these elements, or any other solution you can provide us.

    Eduardo,
    It sounded like you have the device setup properly, however under the system management tab, it has the ways it will detect if there is a disconnect.
    If you have wan 1 and wan 2 set checked beside the default gateway it will ping the gateway and if it gets a reply from the modem, it will stay connected. 
    You might not have internet connectivity, but the router thinks you do cause it can ping the modem.  If you uncheck this and set it to remote host.  Then
    set wan 1 to www.google.com and wan 2 to www.yahoo.com.  This way it has to get all the way out to the internet to resolve internet names.  If it can't,
    it starts the failover process.

  • RV042 Protectlink did not work afer reboot

    Hi, I have activated Protectlink Web. The service is excellent im very pleased about it. But today i started to get "router is busy"  in all pages, so we restarted the router. That problem was solved but now the the web Protection is no longer working. It says activated but licence status says waiting.
    I have read in other topic that is a firmware problem. I have restored the router to factory defaults and upgraded the firmware to v4.1.1.01-sp and activated again but web Protection still not working..
    What can i do?
    thanks

    After the device is reset to factory default, the activated license stored on the device is gone and the device will try to connect to the license server for entitlement checking. What you are experiencing might be caused by a temporal outage of the license server, but please call the Support Center to get immediate assistance.
    https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

  • Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

    I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
    On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
    When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
    Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
    On my laptop, I get a full, (7) tabl menu with all the normal options:

    I found this answer from Deepak Chauhan on another forum, and it solved this problem!
    Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
    If windows 7 is Enterprise or better edition: (Admin rights required)
    Start>search for printmanagement.msc and open the print management module
    Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
    - from printers ensure there's no Adobe PDF printer, if there is delete it
    - go to ports and delete the PDF ports (the ones ending in *.pdf)
    - go to drivers and delete the PDF converter.
    Take note if any errors occur, but continue with the following steps regardless.
    If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
    Then open the registry (if any erors deleting these keys happen, see below)
    1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
    delete any adobe PDF printer subkey present
    2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
    delee the PDF port monitor if present
    3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
    again delete and pdf printer subkey
    If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
    Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
    Once you've all that has been done, open a command line as administrator.
    Copy and pate the following commands in order
    1: net stop spooler
    2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
    3: net start spooler
    4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
    That should set back the pdf printer.
    This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

  • [Athlon64] CD / DVD not working properly, Neao K8T800 Pro series.

    Hi all,
    I purchased a MSI K8t Neo2 motherboard along with a AMD 64 3200+ (socket 939) in the beginning of May.
    When i installed the parts in my case I experienced some problems getting windows (which I reinstalled) to detect all the Harddrives i had.
    I solved this by putting 3 HDD's on one IDE interface, and 1 on a separate controllercard. on the other IDE interface i put my Sony DRU-700A DVD alone.
    This worked, to a certain extent.. When I place a disc in the DVD, windows gets a hizziefit and starts to lag insanely, when it's finally done, it won't autostart the discs i put in, i can't double-click it from My Computer as i get the error:
    "F:\
    Only part of a ReadProcessMemory or WriteprocessMemory request was completed."
    Doesn't tell me much.. I then try ro right-click F: and select "exlore", AHA! this works. I get into the disc and i can move around in the foldertrees, but it takes time.. My GOD it takes time...
    When i finally reach my destination and try to execute a .exe file, this happens:
    "F:\ is not a valid win32 application".
    At this point one starts to think: "ok.. i know that.. but the exe-file i tried to start IS..."
    NOTE: From time to time i've noticed that it switched between these 2 error messages, i.e i get the "not valid" when trying to start the disc and the "ReadError" when starting a .exe-file, and vice versa.
    I have the latest bios, i have tried adding a LG CD-R/W tp the process and tested if that worked, see results here: www.vikholm.se/say_what.gif     
    I might not be the sharpest tool in the shed, but i know that CAN'T be right?
    I then went into the Device Manager and selected "uninstall" on my Sony DVD, thinking it has to find new hardware on reboot and reinstall it. Windows finds nothing, and i can't seem to get it back again..
    Anyways, i noticed that 2 updates to my mobo was avaliable through MSI Live Update, so i choose the newer one and install it, thinking it might solve this problem.
    Select reboot -> Click "exit now" on firefox.exe  -> run for work as i', late -> come home now just to see that windows did NOT reboot as i got an error code from some exe-file.
    Anyways, reboot properly this time and half-way through the boot up it reboots again, and at the loadingscreen where you can see the biosversion and such it says:
    "Sec Master drive is not ATAPI compatible
    F1 to Resume"
    This is my LG CD-R/W. I press F1 and it boots just fine, and i see that my LG is no longer avaliable in My computer.
    These are my problems.
    To sum things up:
    1. Could it be my mobo that is screwed up in the IDE interfaces?
    2. Could it be my IDE cables? (i don't have any others to try with =( )
    3. I've been in contact with Sony's support, accordign to their firmware testers and producttest programs, my device worked as it should.
    4. Anyone have any tips on how to get my Sonydevice back to windows without reinstalling windows? It not, i'll just have to reinstall.
    5. If all else failes, can anyone lend me a handgun so i can end my misery?
    Thanks a million for reading and if you have the slightest idea of what might fix ANY of the problems stated above, do not hesitate to post. Please.
    Milk and cookies for anyone who helps me solve this 

    Quote from: Tiresmoke on 09-July-05, 01:49:28
    The promise controller is simply there to add to their Sata Raid ability. It is not for opticals.
    Then let's do some RTFM:
    Quote
    Pages 1-2 and 1-3
    Promise 20579 On-Board (Optional)
    >Supports two SATA and one IDE
    -  RAID 0, RAID 1 and RAID 0+1 supported
    -  RAID function work with ATA133+SATA H/D or two SATA H/DConnect up to two SATA devices (such as SATA HDD, CD-ROM, DVD-ROM and
    two ATA133 devices
    > SATA 150MB/s with extensions (SATA II Phase I)
    > RAID Smart function
    > SATA ATAPI device compatible
    That clearly states the ability to get opticals connected. It is admitted, that there only SATA opticals are mentioned.
    Quote
    Page 2-18
    Parallel ATA/Serial ATA RAID Connectors controlled by Promise
    20579: IDE3/SER1/SER2 (Optional)
    The brand new Promise 20579 chipset supports  one IDE connector IDE3 and two
    serial connectors SER1& SER2.
    IDE3 is a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/133 controller that provides
    PIO mode and DMA mode 0~5, Bus Master, and Ultra DMA 66/100/133 function. You
    can connect up to 2 hard disk drives---one IDE master and one IDE slave.
    Other devices than HDDs are not mentioned in the IDE3 section.
    Conclusion: According to the documentation, opticals can be connected to the promise controller, at least if they are connected to the SATA-interface.
    Own experiments show:
    If an optical drive is connected to IDE3, the promise controller detects it correctly. If a bootable media is inserted, it is detected as bootable by the controller BIOS.
    An old LD 8240 CD-Writer (only MWDMA2/PIO4 capable) works partly, if attached to IDE3, but there are errors. Playing Audio CDs and DAE generates drop-outs. CD burning results in corrupted data on the media.
    If I connect a LG 4163B DVD-Writer, there are no issues concerning CD-playback or DAE. CD-recording was not tried out. The DVD-RAM feature fails, possibly due to driver interference.
    This shows, that there at least a CD-ROM or DVD-ROM drive (PATA) might work on the promise controller, but that also depends on the drive itself.
    Michael

  • NVIDIA driver not working on HP envy dv7

    Hi,
    i trying to install nvidia official driver to my HP envy dv7 laptop.
    Two wasted nights without success.
    I trying newest version from nvidia.com and from pacman.
    Result is same in both cases - black screen, high cpu temperatures, no video output.
    Pasted logs are from pacman version.
    Thank you for help !
    uname -a :
    $ uname -a
    Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    lspci | grep VGA
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
    modinfo nvidia
    $modinfo nvidia
    filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
    alias: char-major-195-*
    version: 331.38
    supported: external
    license: NVIDIA
    alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
    alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
    alias: pci:v000010DEd*sv*sd*bc03sc02i00*
    alias: pci:v000010DEd*sv*sd*bc03sc00i00*
    depends: drm,i2c-core
    vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
    parm: NVreg_Mobile:int
    parm: NVreg_ResmanDebugLevel:int
    parm: NVreg_RmLogonRC:int
    parm: NVreg_ModifyDeviceFiles:int
    parm: NVreg_DeviceFileUID:int
    parm: NVreg_DeviceFileGID:int
    parm: NVreg_DeviceFileMode:int
    parm: NVreg_RemapLimit:int
    parm: NVreg_UpdateMemoryTypes:int
    parm: NVreg_InitializeSystemMemoryAllocations:int
    parm: NVreg_RMEdgeIntrCheck:int
    parm: NVreg_UsePageAttributeTable:int
    parm: NVreg_MapRegistersEarly:int
    parm: NVreg_RegisterForACPIEvents:int
    parm: NVreg_CheckPCIConfigSpace:int
    parm: NVreg_EnablePCIeGen3:int
    parm: NVreg_EnableMSI:int
    parm: NVreg_MemoryPoolSize:int
    parm: NVreg_RegistryDwords:charp
    parm: NVreg_RmMsg:charp
    parm: NVreg_AssignGpus:charp
    pacman -Qi nvidia
    $pacman -Qi nvidia
    Name : nvidia
    Version : 331.38-3
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
    Optional Deps : None
    Required By : None
    Optional For : bumblebee
    Conflicts With : nvidia-96xx nvidia-173xx
    Replaces : None
    Installed Size : 4642.00 KiB
    Packager : Thomas Bächler <[email protected]>
    Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
    Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    nvidia-xconfig --query-gpu-info
    $nvidia-xconfig --query-gpu-info
    Number of GPUs: 1
    GPU #0:
    Name : GeForce GT 630M
    UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
    PCI BusID : PCI:1:0:0
    Number of Display Devices: 1
    Display Device 0 (CRT-0):
    No EDID information available.
    xorg.0.log
    [ 2028.379]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2028.394] X Protocol Version 11, Revision 0
    [ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
    [ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 2028.423] Build Date: 09 January 2014 08:47:24AM
    [ 2028.431]
    [ 2028.439] Current version of pixman: 0.32.4
    [ 2028.456] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
    [ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2028.548] (==) ServerLayout "Layout0"
    [ 2028.561] (**) |-->Screen "Screen0" (0)
    [ 2028.574] (**) | |-->Monitor "Monitor0"
    [ 2028.587] (**) | |-->Device "Device0"
    [ 2028.601] (**) |-->Input Device "Keyboard0"
    [ 2028.615] (**) |-->Input Device "Mouse0"
    [ 2028.629] (==) Automatically adding devices
    [ 2028.643] (==) Automatically enabling devices
    [ 2028.658] (==) Automatically adding GPU devices
    [ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2028.688] Entry deleted from font path.
    [ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2028.721] Entry deleted from font path.
    [ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2028.774] Entry deleted from font path.
    [ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2028.869] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2028.931] (WW) Disabling Keyboard0
    [ 2028.952] (WW) Disabling Mouse0
    [ 2028.974] (II) Loader magic: 0x804c80
    [ 2028.995] (II) Module ABI versions:
    [ 2029.017] X.Org ANSI C Emulation: 0.4
    [ 2029.039] X.Org Video Driver: 15.0
    [ 2029.062] X.Org XInput driver : 20.0
    [ 2029.084] X.Org Server Extension : 8.0
    [ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
    [ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
    [ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 2029.213] Initializing built-in extension Generic Event Extension
    [ 2029.240] Initializing built-in extension SHAPE
    [ 2029.267] Initializing built-in extension MIT-SHM
    [ 2029.295] Initializing built-in extension XInputExtension
    [ 2029.322] Initializing built-in extension XTEST
    [ 2029.349] Initializing built-in extension BIG-REQUESTS
    [ 2029.377] Initializing built-in extension SYNC
    [ 2029.404] Initializing built-in extension XKEYBOARD
    [ 2029.432] Initializing built-in extension XC-MISC
    [ 2029.459] Initializing built-in extension SECURITY
    [ 2029.486] Initializing built-in extension XINERAMA
    [ 2029.512] Initializing built-in extension XFIXES
    [ 2029.538] Initializing built-in extension RENDER
    [ 2029.564] Initializing built-in extension RANDR
    [ 2029.589] Initializing built-in extension COMPOSITE
    [ 2029.615] Initializing built-in extension DAMAGE
    [ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2029.665] Initializing built-in extension DOUBLE-BUFFER
    [ 2029.688] Initializing built-in extension RECORD
    [ 2029.711] Initializing built-in extension DPMS
    [ 2029.734] Initializing built-in extension Present
    [ 2029.756] Initializing built-in extension DRI3
    [ 2029.778] Initializing built-in extension X-Resource
    [ 2029.800] Initializing built-in extension XVideo
    [ 2029.821] Initializing built-in extension XVideo-MotionCompensation
    [ 2029.842] Initializing built-in extension XFree86-VidModeExtension
    [ 2029.863] Initializing built-in extension XFree86-DGA
    [ 2029.883] Initializing built-in extension XFree86-DRI
    [ 2029.903] Initializing built-in extension DRI2
    [ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 2029.923] (II) LoadModule: "glx"
    [ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2029.993] compiled for 4.0.2, module version = 1.0.0
    [ 2030.034] Module class: X.Org Server Extension
    [ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
    [ 2030.076] Loading extension GLX
    [ 2030.077] (II) LoadModule: "nvidia"
    [ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2030.142] compiled for 4.0.2, module version = 1.0.0
    [ 2030.185] Module class: X.Org Video Driver
    [ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
    [ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
    [ 2030.273] (II) X log verbosity: 5
    [ 2030.315] (--) using VT number 1
    [ 2030.462] (II) Loading sub module "fb"
    [ 2030.462] (II) LoadModule: "fb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2030.462] (II) Module fb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 2030.462] (II) Loading sub module "wfb"
    [ 2030.462] (II) LoadModule: "wfb"
    [ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
    [ 2030.462] compiled for 1.15.0, module version = 1.0.0
    [ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2030.462] (II) Loading sub module "ramdac"
    [ 2030.462] (II) LoadModule: "ramdac"
    [ 2030.462] (II) Module "ramdac" already built-in
    [ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2030.462] (==) NVIDIA(0): RGB weight 888
    [ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
    [ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2030.463] (==) NVIDIA(0): Using HW cursor
    [ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
    [ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
    [ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
    [ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
    [ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
    [ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
    [ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
    [ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
    [ 2030.589] (II) NVIDIA(0): Chip SKU: 770
    [ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
    [ 2030.589] (II) NVIDIA(0): Project: 1303
    [ 2030.589] (II) NVIDIA(0): Project SKU: 0000
    [ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
    [ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
    [ 2030.589] (--) NVIDIA(0): Found 2 heads on board
    [ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
    [ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
    [ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2030.589] (II) NVIDIA(0): SPS : 1
    [ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
    [ 2030.589] (II) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
    [ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
    [ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 2030.591] (--) NVIDIA(0): CRT
    [ 2030.591] (--) NVIDIA(0): CRT-0
    [ 2030.591] (--) NVIDIA(0): DPY-0
    [ 2030.591] (--) NVIDIA(0): VGA-0
    [ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): No EDID Available.
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
    [ 2030.591] (--) NVIDIA(0):
    [ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2030.591] (**) NVIDIA(0): all display devices.)
    [ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2030.593] (II) NVIDIA(GPU-0):
    [ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
    [ 2030.593] (II) NVIDIA(0): CRT-0
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
    [ 2030.593] (==) NVIDIA(0):
    [ 2030.593] (II) NVIDIA(0): Requested modes:
    [ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Validated MetaModes:
    [ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
    [ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
    [ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
    [ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Offset : +0 +0
    [ 2030.593] (II) NVIDIA(0): Panning
    [ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
    [ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
    [ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
    [ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
    [ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
    [ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
    [ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
    [ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 2030.596] (--) Depth 24 pixmap format is 32 bpp
    [ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2030.597] (II) NVIDIA: access.
    [ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
    [ 2030.599] (II) NVIDIA(0): GPU initialized
    [ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
    [ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
    [ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
    [ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
    [ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 2030.619] (II) NVIDIA(0): First mode initialized
    [ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
    [ 2030.629] (II) NVIDIA(0): Using built-in logo image.
    [ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
    [ 2030.641] Loading extension NV-GLX
    [ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 2030.689] (II) NVIDIA(0): Visuals set up
    [ 2030.689] (II) NVIDIA(0): Pixmap depths set up
    [ 2030.690] (II) NVIDIA(0): GLX visuals set up
    [ 2030.690] (II) NVIDIA(0): Framebuffer set up
    [ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 2030.690] (==) NVIDIA(0): Backing store enabled
    [ 2030.690] (==) NVIDIA(0): Silken mouse enabled
    [ 2030.690] (II) NVIDIA(0): Default colormap initialized.
    [ 2030.690] (II) NVIDIA(0): Palette loaded
    [ 2030.690] (**) NVIDIA(0): DPMS enabled
    [ 2030.690] Loading extension NV-CONTROL
    [ 2030.690] Loading extension XINERAMA
    [ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
    [ 2030.690] (II) Loading sub module "dri2"
    [ 2030.690] (II) LoadModule: "dri2"
    [ 2030.690] (II) Module "dri2" already built-in
    [ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2030.690] (II) NVIDIA(0): Screen initialization complete
    [ 2030.690] (--) RandR disabled
    [ 2030.695] (II) Initializing extension GLX
    [ 2030.726] (II) XKB: Reusing cached keymap
    [ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2030.728] (II) LoadModule: "evdev"
    [ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
    [ 2030.728] compiled for 1.15.0, module version = 2.8.2
    [ 2030.728] Module class: X.Org XInput Driver
    [ 2030.728] ABI class: X.Org XInput driver, version 20.0
    [ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
    [ 2030.728] Option "XkbRules" "evdev"
    [ 2030.728] Option "XkbModel" "pc104"
    [ 2030.728] Option "XkbLayout" "us"
    [ 2030.728] Option "_source" "server/udev"
    [ 2030.728] Option "name" "Power Button"
    [ 2030.728] Option "path" "/dev/input/event2"
    [ 2030.728] Option "device" "/dev/input/event2"
    [ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.728] Option "driver" "evdev"
    [ 2030.728] (**) Power Button: always reports core events
    [ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2030.729] (--) evdev: Power Button: Found keys
    [ 2030.729] (II) evdev: Power Button: Configuring as keyboard
    [ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2030.729] (**) Option "xkb_rules" "evdev"
    [ 2030.729] (**) Option "xkb_model" "pc104"
    [ 2030.729] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2030.748] (II) No input driver specified, ignoring this device.
    [ 2030.748] (II) This device may have been added with another device file.
    [ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
    [ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
    [ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
    [ 2030.748] Option "XkbRules" "evdev"
    [ 2030.748] Option "XkbModel" "pc104"
    [ 2030.748] Option "XkbLayout" "us"
    [ 2030.748] Option "_source" "server/udev"
    [ 2030.748] Option "name" "HP Truevision HD"
    [ 2030.748] Option "path" "/dev/input/event7"
    [ 2030.748] Option "device" "/dev/input/event7"
    [ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] Option "driver" "evdev"
    [ 2030.748] (**) HP Truevision HD: always reports core events
    [ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
    [ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
    [ 2030.748] (--) evdev: HP Truevision HD: Found keys
    [ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
    [ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
    [ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
    [ 2030.748] (**) Option "xkb_rules" "evdev"
    [ 2030.748] (**) Option "xkb_model" "pc104"
    [ 2030.748] (**) Option "xkb_layout" "us"
    [ 2030.748] (II) XKB: Reusing cached keymap
    [ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
    [ 2030.749] (II) No input driver specified, ignoring this device.
    [ 2030.749] (II) This device may have been added with another device file.
    [ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "AT Translated Set 2 keyboard"
    [ 2030.750] Option "path" "/dev/input/event0"
    [ 2030.750] Option "device" "/dev/input/event0"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 2030.750] (**) Option "xkb_rules" "evdev"
    [ 2030.750] (**) Option "xkb_model" "pc104"
    [ 2030.750] (**) Option "xkb_layout" "us"
    [ 2030.750] (II) XKB: Reusing cached keymap
    [ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
    [ 2030.750] Option "XkbRules" "evdev"
    [ 2030.750] Option "XkbModel" "pc104"
    [ 2030.750] Option "XkbLayout" "us"
    [ 2030.750] Option "_source" "server/udev"
    [ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
    [ 2030.750] Option "path" "/dev/input/event10"
    [ 2030.750] Option "device" "/dev/input/event10"
    [ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.750] Option "driver" "evdev"
    [ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
    [ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
    [ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
    [ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
    [ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
    [ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
    [ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2030.751] (II) No input driver specified, ignoring this device.
    [ 2030.751] (II) This device may have been added with another device file.
    [ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
    [ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2030.752] Option "XkbRules" "evdev"
    [ 2030.752] Option "XkbModel" "pc104"
    [ 2030.752] Option "XkbLayout" "us"
    [ 2030.752] Option "_source" "server/udev"
    [ 2030.752] Option "name" "HP WMI hotkeys"
    [ 2030.752] Option "path" "/dev/input/event9"
    [ 2030.752] Option "device" "/dev/input/event9"
    [ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] Option "driver" "evdev"
    [ 2030.752] (**) HP WMI hotkeys: always reports core events
    [ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
    [ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
    [ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
    [ 2030.752] (**) Option "xkb_rules" "evdev"
    [ 2030.752] (**) Option "xkb_model" "pc104"
    [ 2030.752] (**) Option "xkb_layout" "us"
    [ 2030.752] (II) XKB: Reusing cached keymap
    [ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.256] (**) NVIDIA(0): all display devices.)
    [ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.257] (II) NVIDIA(GPU-0):
    [ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.258] (II) NVIDIA(GPU-0):
    [ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
    [ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
    [ 2031.506] (**) NVIDIA(0): all display devices.)
    [ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
    [ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
    [ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
    [ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
    [ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
    [ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
    [ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
    [ 2031.509] (II) NVIDIA(GPU-0):
    [ 2046.582] (II) evdev: HP WMI hotkeys: Close
    [ 2046.582] (II) UnloadModule: "evdev"
    [ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
    [ 2046.623] (II) UnloadModule: "evdev"
    [ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2046.663] (II) UnloadModule: "evdev"
    [ 2046.702] (II) evdev: HP Truevision HD: Close
    [ 2046.702] (II) UnloadModule: "evdev"
    [ 2046.741] (II) evdev: Power Button: Close
    [ 2046.741] (II) UnloadModule: "evdev"
    [ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 2046.795] (EE) Server terminated successfully (0). Closing log file.
    xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
    Section "Module"
    Load "glx"
    EndSection
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    # VendorName "Unknown"
    # ModelName "Unknown"
    # HorizSync 28.0 - 33.0
    # VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0"
    # Option "UseEDID" "true"
    Option "ConnectedMonitor" "DFP-0"
    # Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    dmesg :
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask F80000000 write-back
    [ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
    [ 0.000000] 9 base 260000000 mask FE0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 000040
    [ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
    [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00090fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
    [ 0.000000] On node 0 totalpages: 2070351
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3984 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9799 pages used for memmap
    [ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
    [ 0.000000] Normal zone: 22488 pages used for memmap
    [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.589 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000030] Yama: becoming mindful.
    [ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002614] Mount-cache hash table entries: 256
    [ 0.002739] Initializing cgroup subsys memory
    [ 0.002743] Initializing cgroup subsys devices
    [ 0.002744] Initializing cgroup subsys freezer
    [ 0.002746] Initializing cgroup subsys net_cls
    [ 0.002747] Initializing cgroup subsys blkio
    [ 0.002763] CPU: Physical Processor ID: 0
    [ 0.002764] CPU: Processor Core ID: 0
    [ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003048] mce: CPU supports 9 MCE banks
    [ 0.003058] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 2
    [ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.003906] ACPI: Core revision 20131115
    [ 0.009053] ACPI: All ACPI Tables successfully acquired
    [ 0.053822] ftrace: allocating 21057 entries in 83 pages
    [ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.094948] TSC deadline timer enabled
    [ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.094960] ... version: 3
    [ 0.094960] ... bit width: 48
    [ 0.094961] ... generic registers: 4
    [ 0.094962] ... value mask: 0000ffffffffffff
    [ 0.094962] ... max period: 0000ffffffffffff
    [ 0.094963] ... fixed-purpose events: 3
    [ 0.094964] ... event mask: 000000070000000f
    [ 0.121742] x86: Booting SMP configuration:
    [ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.256907] x86: Booted up 1 node, 8 CPUs
    [ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
    [ 0.262487] devtmpfs: initialized
    [ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.265037] RTC time: 21:55:49, date: 02/28/14
    [ 0.265063] NET: Registered protocol family 16
    [ 0.265128] cpuidle: using governor ladder
    [ 0.265129] cpuidle: using governor menu
    [ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.265148] ACPI: bus type PCI registered
    [ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.282064] PCI: Using configuration type 1 for base access
    [ 0.282527] bio: create slab <bio-0> at 0
    [ 0.282615] ACPI: Added _OSI(Module Device)
    [ 0.282616] ACPI: Added _OSI(Processor Device)
    [ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
    [ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
    [ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
    [ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
    [ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.313310] ACPI: Dynamic OEM Table Load:
    [ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
    [ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.326272] ACPI: Dynamic OEM Table Load:
    [ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
    [ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 0.339508] ACPI: Dynamic OEM Table Load:
    [ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
    [ 1.238575] ACPI: Interpreter enabled
    [ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 1.238594] ACPI: (supports S0 S3 S4 S5)
    [ 1.238595] ACPI: Using IOAPIC for interrupt routing
    [ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
    [ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 1.321214] \_SB_.PCI0:_OSC invalid UUID
    [ 1.321215] _OSC request data:1 1f 0
    [ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 1.321676] PCI host bridge to bus 0000:00
    [ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
    [ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
    [ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
    [ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
    [ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
    [ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
    [ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
    [ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
    [ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
    [ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
    [ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
    [ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
    [ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
    [ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
    [ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
    [ 1.331423] pci 0000:08:00.0: supports D1 D2
    [ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
    [ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
    [ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
    [ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
    [ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
    [ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
    [ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
    [ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
    [ 1.344234] pci 0000:0b:00.0: supports D1 D2
    [ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
    [ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.381661] Found 1 acpi root devices
    [ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 1.381740] vgaarb: loaded
    [ 1.381741] vgaarb: bridge control possible 0000:01:00.0
    [ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
    [ 1.381759] PCI: Using ACPI for IRQ routing
    [ 1.387711] PCI: pci_cache_line_size set to 64 bytes
    [ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
    [ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
    [ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [ 1.387910] NetLabel: Initializing
    [ 1.387911] NetLabel: domain hash size = 128
    [ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.387923] NetLabel: unlabeled traffic allowed by default
    [ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.389961] Switched to clocksource hpet
    [ 1.392856] pnp: PnP ACPI init
    [ 1.392865] ACPI: bus type PNP registered
    [ 1.392884] pnp 00:00: [dma 4]
    [ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
    [ 1.393028] system 00:04: [io 0xffff] has been reserved
    [ 1.393029] system 00:04: [io 0xffff] has been reserved
    [ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
    [ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
    [ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
    [ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.393478] pnp: PnP ACPI: found 12 devices
    [ 1.393479] ACPI: bus type PNP unregistered
    [ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
    [ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
    [ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
    [ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    [ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
    [ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
    [ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
    [ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
    [ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
    [ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
    [ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
    [ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
    [ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
    [ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
    [ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
    [ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
    [ 1.399530] NET: Registered protocol family 2
    [ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.399860] TCP: reno registered
    [ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.399937] NET: Registered protocol family 1
    [ 1.399946] pci 0000:00:02.0: Boot video device
    [ 1.780500] PCI: CLS 64 bytes, default 64
    [ 1.780530] Unpacking initramfs...
    [ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
    [ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
    [ 1.820794] Simple Boot Flag at 0x44 set to 0x1
    [ 1.820989] Scanning for low memory corruption every 60 seconds
    [ 1.821175] audit: initializing netlink socket (disabled)
    [ 1.821183] type=2000 audit(1393624549.773:1): initialized
    [ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.831019] zbud: loaded
    [ 1.831130] VFS: Disk quotas dquot_6.5.2
    [ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.831254] msgmni has been set to 15764
    [ 1.831287] Key type big_key registered
    [ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.831523] io scheduler noop registered
    [ 1.831524] io scheduler deadline registered
    [ 1.831539] io scheduler cfq registered (default)
    [ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 1.832123] vesafb: scrolling: redraw
    [ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
    [ 1.946268] Console: switching to colour frame buffer device 240x67
    [ 2.059378] fb0: VESA VGA frame buffer device
    [ 2.059386] intel_idle: MWAIT substates: 0x21120
    [ 2.059387] intel_idle: v0.4 model 0x3A
    [ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.059528] GHES: HEST is not enabled!
    [ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.059853] Linux agpgart interface v0.103
    [ 2.059899] rtc_cmos 00:05: RTC can wake from S4
    [ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 2.060039] Intel P-state driver initializing.
    [ 2.060046] Intel pstate controlling: cpu 0
    [ 2.060056] Intel pstate controlling: cpu 1
    [ 2.060066] Intel pstate controlling: cpu 2
    [ 2.060075] Intel pstate controlling: cpu 3
    [ 2.060081] Intel pstate controlling: cpu 4
    [ 2.060087] Intel pstate controlling: cpu 5
    [ 2.060094] Intel pstate controlling: cpu 6
    [ 2.060101] Intel pstate controlling: cpu 7
    [ 2.060170] drop_monitor: Initializing network drop monitor service
    [ 2.060205] TCP: cubic registered
    [ 2.060258] NET: Registered protocol family 10
    [ 2.060356] NET: Registered protocol family 17
    [ 2.060361] Key type dns_resolver registered
    [ 2.060562] registered taskstats version 1
    [ 2.061180] Magic number: 2:200:956
    [ 2.061210] memory memory9: hash matches
    [ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
    [ 2.061289] PM: Hibernation image not present or could not be loaded.
    [ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 2.061822] Write protecting the kernel read-only data: 8192k
    [ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
    [ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
    [ 2.070995] systemd-udevd[76]: starting version 208
    [ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
    [ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 2.087062] ACPI: bus type USB registered
    [ 2.087089] usbcore: registered new interface driver usbfs
    [ 2.087162] usbcore: registered new interface driver hub
    [ 2.087210] usbcore: registered new device driver usb
    [ 2.087615] SCSI subsystem initialized
    [ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.087987] ehci-pci: EHCI PCI platform driver
    [ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.088526] libata version 3.00 loaded.
    [ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
    [ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.104041] hub 1-0:1.0: USB hub found
    [ 2.104046] hub 1-0:1.0: 2 ports detected
    [ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
    [ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.117508] hub 2-0:1.0: USB hub found
    [ 2.117514] hub 2-0:1.0: 2 ports detected
    [ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 2.118100] hub 3-0:1.0: USB hub found
    [ 2.118108] hub 3-0:1.0: 4 ports detected
    [ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 2.118452] hub 4-0:1.0: USB hub found
    [ 2.118462] hub 4-0:1.0: 4 ports detected
    [ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.150760] ahci 0000:00:1f.2: version 3.0
    [ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
    [ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 2.171405] scsi0 : ahci
    [ 2.171666] scsi1 : ahci
    [ 2.171894] scsi2 : ahci
    [ 2.172116] scsi3 : ahci
    [ 2.172313] scsi4 : ahci
    [ 2.172447] scsi5 : ahci
    [ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
    [ 2.172514] ata2: DUMMY
    [ 2.172516] ata3: DUMMY
    [ 2.172517] ata4: DUMMY
    [ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
    [ 2.172520] ata6: DUMMY
    [ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
    [ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
    [ 2.512780] ata1.00: configured for UDMA/133
    [ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
    [ 2.524950] ata5.00: configured for UDMA/100
    [ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
    [ 2.534925] hub 1-1:1.0: USB hub found
    [ 2.534975] hub 1-1:1.0: 6 ports detected
    [ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
    [ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.651588] systemd[1]: No hostname configured.
    [ 2.651596] systemd[1]: Set hostname to <localhost>.
    [ 2.653530] random: systemd urandom read with 42 bits of entropy available
    [ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
    [ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.687572] systemd[1]: Starting Login Prompts.
    [ 2.687585] systemd[1]: Reached target Login Prompts.
    [ 2.687595] systemd[1]: Starting Remote File Systems.
    [ 2.687605] systemd[1]: Reached target Remote File Systems.
    [ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.687822] systemd[1]: Starting Paths.
    [ 2.687832] systemd[1]: Reached target Paths.
    [ 2.687842] systemd[1]: Starting Journal Socket.
    [ 2.687878] systemd[1]: Listening on Journal Socket.
    [ 2.687895] systemd[1]: Mounting Debug File System...
    [ 2.688266] systemd[1]: Starting Journal Service...
    [ 2.688521] systemd[1]: Started Journal Service.
    [ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
    [ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
    [ 2.708483] FS-Cache: Loaded
    [ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.713390] RPC: Registered named UNIX socket transport module.
    [ 2.713392] RPC: Registered udp transport module.
    [ 2.713393] RPC: Registered tcp transport module.
    [ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 2.741906] systemd-udevd[202]: starting version 208
    [ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
    [ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
    [ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 2.791210] ACPI: Lid Switch [LID0]
    [ 2.791504] [drm] Initialized drm 1.1.0 20060810
    [ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.791609] ACPI: Power Button [PWRF]
    [ 2.792665] wmi: Mapper loaded
    [ 2.792681] hp_accel: laptop model unknown, using default axes configuration
    [ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
    [ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
    [ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.816644] Copyright(c) 2003-2013 Intel Corporation
    [ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
    [ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.818636] platform microcode: Direct firmware load failed with error -2
    [ 2.818639] platform microcode: Falling back to user helper
    [ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
    [ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.828014] usbcore: registered new interface driver usbhid
    [ 2.828016] usbhid: USB HID core driver
    [ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 2.835666] usbcore: registered new interface driver snd-usb-audio
    [ 2.854044] iTCO_vendor_support: vendor-support=0
    [ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.860514] platform microcode: Direct firmware load failed with error -2
    [ 2.860516] platform microcode: Falling back to user helper
    [ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
    [ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
    [ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.867498] platform microcode: Direct firmware load failed with error -2
    [ 2.867500] platform microcode: Falling back to user helper
    [ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870100] platform microcode: Direct firmware load failed with error -2
    [ 2.870102] platform microcode: Falling back to user helper
    [ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.870561] platform microcode: Direct firmware load failed with error -2
    [ 2.870563] platform microcode: Falling back to user helper
    [ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871285] platform microcode: Direct firmware load failed with error -2
    [ 2.871288] platform microcode: Falling back to user helper
    [ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.871949] platform microcode: Direct firmware load failed with error -2
    [ 2.871952] platform microcode: Falling back to user helper
    [ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
    [ 2.872254] platform microcode: Direct firmware load failed with error -2
    [ 2.872257] platform microcode: Falling back to user helper
    [ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
    [ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
    [ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
    [ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.941825] hub 2-1:1.0: USB hub found
    [ 2.941930] hub 2-1:1.0: 8 ports detected
    [ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
    [ 3.074806] lis3lv02d: 8 bits 3DC sensor found
    [ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.233045] Disabling lock debugging due to kernel taint
    [ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
    [ 3.356112] media: Linux media interface: v0.10
    [ 3.360422] Linux video capture interface: v2.00
    [ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
    [ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
    [ 3.377488] usbcore: registered new interface driver uvcvideo
    [ 3.377494] USB Video Class driver (1.1.1)
    [ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
    [ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
    [ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
    [ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
    [ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 3.521478] Bluetooth: Core ver 2.17
    [ 3.521492] NET: Registered protocol family 31
    [ 3.521493] Bluetooth: HCI device and connection manager initialized
    [ 3.521499] Bluetooth: HCI socket layer initialized
    [ 3.521501] Bluetooth: L2CAP socket layer initialized
    [ 3.521505] Bluetooth: SCO socket layer initialized
    [ 3.523209] usbcore: registered new interface driver btusb
    [ 3.597251] r8169 0000:0b:00.0 eno1: link down
    [ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
    [ 3.825665] Switched to clocksource tsc
    [ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
    [ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
    [ 4.107557] mousedev: PS/2 mouse device common for all mice
    [ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
    [ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
    [ 4.606281] [Firmware Bug]: No valid trip found
    [ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
    [ 5.283560] random: nonblocking pool is initialized
    [ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
    [ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
    [ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
    [ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
    [ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
    [ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
    [ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
    lsmod
    Module Size Used by
    joydev 9631 0
    mousedev 10247 0
    btusb 19648 0
    bluetooth 326343 2 btusb
    uvcvideo 72804 0
    videobuf2_vmalloc 3304 1 uvcvideo
    videobuf2_memops 2335 1 videobuf2_vmalloc
    videobuf2_core 28243 1 uvcvideo
    videodev 111840 2 uvcvideo,videobuf2_core
    media 11719 2 uvcvideo,videodev
    nvidia 10621191 29
    intel_rapl 11776 0
    x86_pkg_temp_thermal 6991 0
    intel_powerclamp 8802 0
    coretemp 6358 0
    kvm_intel 131532 0
    kvm 396221 1 kvm_intel
    crct10dif_pclmul 4682 0
    crct10dif_common 1372 1 crct10dif_pclmul
    crc32_pclmul 2923 0
    crc32c_intel 14185 0
    ghash_clmulni_intel 4405 0
    aesni_intel 45548 0
    aes_x86_64 7399 1 aesni_intel
    lrw 3565 1 aesni_intel
    gf128mul 5858 1 lrw
    glue_helper 4417 1 aesni_intel
    ablk_helper 2004 1 aesni_intel
    cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    hid_generic 1153 0
    hp_wmi 7595 0
    sparse_keymap 3146 1 hp_wmi
    arc4 2000 2
    iTCO_wdt 5407 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    mxm_wmi 1467 0
    iwldvm 167738 0
    mac80211 474681 1 iwldvm
    snd_usb_audio 117811 0
    usbhid 40545 0
    snd_usbmidi_lib 19755 1 snd_usb_audio
    hid 90902 2 hid_generic,usbhid
    snd_rawmidi 18742 1 snd_usbmidi_lib
    snd_seq_device 5180 1 snd_rawmidi
    microcode 15216 0
    evdev 11045 11
    psmouse 88171 0
    snd_hda_codec_hdmi 36379 1
    iwlwifi 140193 1 iwldvm
    serio_raw 5009 0
    snd_hda_codec_idt 43508 1
    cfg80211 408199 3 iwlwifi,mac80211,iwldvm
    i2c_i801 11269 0
    rtsx_pci_ms 7258 0
    r8169 58423 0
    memstick 7504 1 rtsx_pci_ms
    rfkill 15651 4 cfg80211,hp_wmi,bluetooth
    mii 4027 1 r8169
    thermal 8556 0
    snd_hda_intel 37352 0
    snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
    intel_gtt 12664 0
    drm_kms_helper 35710 0
    snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
    drm 239102 3 drm_kms_helper,nvidia
    battery 7565 0
    snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    ac 3334 0
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    hp_accel 16520 0
    i2c_algo_bit 5391 0
    mei_me 9552 0
    i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
    lis3lv02d 11283 1 hp_accel
    input_polldev 2818 1 lis3lv02d
    snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    shpchp 25425 0
    mei 62867 1 mei_me
    wmi 8251 2 hp_wmi,mxm_wmi
    video 11425 0
    soundcore 5418 1 snd
    lpc_ich 13368 0
    processor 24620 0
    button 4605 0
    nfs 191568 0
    lockd 76942 1 nfs
    sunrpc 233786 2 nfs,lockd
    fscache 47797 1 nfs
    ext4 473259 2
    crc16 1359 2 ext4,bluetooth
    mbcache 6074 1 ext4
    jbd2 80912 1 ext4
    sr_mod 14930 0
    cdrom 34880 1 sr_mod
    sd_mod 31361 3
    atkbd 16806 0
    libps2 4187 2 atkbd,psmouse
    rtsx_pci_sdmmc 13911 0
    mmc_core 95465 1 rtsx_pci_sdmmc
    ahci 23048 2
    libahci 21698 1 ahci
    libata 172104 2 ahci,libahci
    ehci_pci 3928 0
    xhci_hcd 144553 0
    ehci_hcd 64171 1 ehci_pci
    scsi_mod 132250 3 libata,sd_mod,sr_mod
    rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
    usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
    usb_common 1648 1 usbcore
    i8042 13366 1 libps2
    serio 10721 6 serio_raw,atkbd,i8042,psmouse

  • ASA-5505 Site-to-Site Not Working

    I am somewhat new to Cisco but to do have some experience. I am trying to connect two ASA 5505's together via site-to-site VPN. They are configured with public IPs and all other services are working. I have used the VPN wizard on both boxes successfully but the tunnels are not working. The two devices are on the Comcast network. Any help would be appreacited.
    Site A: ASA 5505 w/50 User license
    Site B: ASA 5505 w/10 User license
    Site A Config:
    ASA Version 8.2(5)
    hostname *********************
    enable password 6.De4e7UzES9wBPg encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    name 192.168.100.10 Web_Server
    name 10.0.6.0 Ghost_Flower_Inside
    name 10.0.5.0 San_Mateo_Inside
    name 10.0.5.100 Any_Connect_100
    name 10.0.5.101 Any_Connect_101
    name 10.0.5.102 Any_Connect_102
    name 10.0.5.103 Any_Connect_103
    name 10.0.5.104 Any_Connect_104
    name 10.0.5.105 Any_Connect_105
    name 10.0.5.106 Any_Connect_106
    name 10.0.5.107 Any_Connect_107
    name 10.0.5.108 Any_Connect_108
    name 10.0.5.109 Any_Connect_109
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    switchport access vlan 12
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.0.5.201 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 173.10.XXX.XXX 255.255.255.252
    interface Vlan12
    no forward interface Vlan1
    nameif dmz
    security-level 50
    ip address 192.168.100.1 255.255.255.0
    ftp mode passive
    dns domain-lookup outside
    dns server-group DefaultDNS
    name-server 75.75.75.75
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group network Any_Connect_DHCP
    network-object host Any_Connect_100
    network-object host Any_Connect_101
    network-object host Any_Connect_102
    network-object host Any_Connect_103
    network-object host Any_Connect_104
    network-object host Any_Connect_105
    network-object host Any_Connect_106
    network-object host Any_Connect_107
    network-object host Any_Connect_108
    network-object host Any_Connect_109
    access-list outside_access_in extended permit tcp any interface outside eq www
    access-list outside_access_in extended permit tcp any interface outside eq ssh
    access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
    access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
    access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu dmz 1500
    ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    global (dmz) 1 192.168.100.2 netmask 255.255.255.255
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 173.10.XXX.XXX 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication http console LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    http 10.0.1.0 255.255.255.0 inside
    http 10.1.10.0 255.255.255.0 outside
    http San_Mateo_Inside 255.255.255.255 inside
    http San_Mateo_Inside 255.255.255.0 inside
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set peer 173.12.XXX.XXX
    crypto map outside_map 1 set transform-set ESP-3DES-SHA
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    vpn-sessiondb max-webvpn-session-limit 10
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh 10.0.1.0 255.255.255.0 inside
    ssh San_Mateo_Inside 255.255.255.0 inside
    ssh 10.1.10.0 255.255.255.0 outside
    ssh 0.0.0.0 0.0.0.0 outside
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 10.0.5.10-10.0.5.30 inside
    dhcpd dns 75.75.75.75 75.75.76.76 interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    anyconnect-essentials
    svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
    svc profiles CATS disk0:/cats.xml
    svc enable
    tunnel-group-list enable
    group-policy DfltGrpPolicy attributes
    dns-server value 75.75.75.75
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    webvpn
      svc profiles value CATS
    username user1 password tTq7bIZ.C4x0j.qv encrypted privilege 15
    username ********* password sPxon1E6hTszm7Ko encrypted privilege 15
    tunnel-group 173.12.XXX.XXX type ipsec-l2l
    tunnel-group 173.12.XXX.XXX ipsec-attributes
    pre-shared-key *****
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
    : end
    Site B:
    ASA Version 8.2(5)
    hostname ***************
    enable password 6.De4e7UzES9wBPg encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    name 192.168.100.10 Web_Server
    name 10.0.6.0 Ghost_Flower_Inside
    name 10.0.5.0 San_Mateo_Inside
    name 10.0.5.100 Any_Connect_100
    name 10.0.5.101 Any_Connect_101
    name 10.0.5.102 Any_Connect_102
    name 10.0.5.103 Any_Connect_103
    name 10.0.5.104 Any_Connect_104
    name 10.0.5.105 Any_Connect_105
    name 10.0.5.106 Any_Connect_106
    name 10.0.5.107 Any_Connect_107
    name 10.0.5.108 Any_Connect_108
    name 10.0.5.109 Any_Connect_109
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    switchport access vlan 12
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.0.5.201 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 173.10.XXX.XXX 255.255.255.252
    interface Vlan12
    no forward interface Vlan1
    nameif dmz
    security-level 50
    ip address 192.168.100.1 255.255.255.0
    ftp mode passive
    dns domain-lookup outside
    dns server-group DefaultDNS
    name-server 75.75.75.75
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    object-group network Any_Connect_DHCP
    network-object host Any_Connect_100
    network-object host Any_Connect_101
    network-object host Any_Connect_102
    network-object host Any_Connect_103
    network-object host Any_Connect_104
    network-object host Any_Connect_105
    network-object host Any_Connect_106
    network-object host Any_Connect_107
    network-object host Any_Connect_108
    network-object host Any_Connect_109
    access-list outside_access_in extended permit tcp any interface outside eq www
    access-list outside_access_in extended permit tcp any interface outside eq ssh
    access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
    access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
    access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu dmz 1500
    ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    global (dmz) 1 192.168.100.2 netmask 255.255.255.255
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 173.10.242.182 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication http console LOCAL
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    http 10.0.1.0 255.255.255.0 inside
    http 10.1.10.0 255.255.255.0 outside
    http San_Mateo_Inside 255.255.255.255 inside
    http San_Mateo_Inside 255.255.255.0 inside
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set peer 173.12.XXX.XXX
    crypto map outside_map 1 set transform-set ESP-3DES-SHA
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    vpn-sessiondb max-webvpn-session-limit 10
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh 10.0.1.0 255.255.255.0 inside
    ssh San_Mateo_Inside 255.255.255.0 inside
    ssh 10.1.10.0 255.255.255.0 outside
    ssh 0.0.0.0 0.0.0.0 outside
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 10.0.5.10-10.0.5.30 inside
    dhcpd dns 75.75.75.75 75.75.76.76 interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    anyconnect-essentials
    svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
    svc profiles CATS disk0:/cats.xml
    svc enable
    tunnel-group-list enable
    group-policy DfltGrpPolicy attributes
    dns-server value 75.75.75.75
    vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
    webvpn
      svc profiles value CATS
    username ************** password sPxon1E6hTszm7Ko encrypted privilege 15
    tunnel-group 173.12.XXX.XXX type ipsec-l2l
    tunnel-group 173.12.XXX.XXX ipsec-attributes
    pre-shared-key *****
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
    : end

    Hi Kevin,
    Both the sides have IP address of 173.10.XXX.XXX  on the respective Outside interfaces and you have configured the peers for 173.12.X.X.
    Please ensure the correct IP addresses for VPN peers are configured , via the following command:
    crypto map outside_map 1 set peer X.X.X.X
    e.g. If you have 173.10.X.X on Site X and 173.12.X.X on Site Y , then
    On Site X, peer would be
    crypto map outside_map 1 set peer 173.12.X.X
    and the tunnel-group will be
    tunnel-group 173.12.XXX.XXX type ipsec-l2l
    tunnel-group 173.12.XXX.XXX ipsec-attributes
    pre-shared-key *****
    On Site Y, peer would be
    crypto map outside_map 1 set peer 173.10.X.X
    and the tunnel-group will be
    tunnel-group 173.10.XXX.XXX type ipsec-l2l
    tunnel-group 173.10.XXX.XXX ipsec-attributes
    pre-shared-key *****
    Also , the nat exempt would be complimentary on each other i.e.
    On Site X,
    access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
    On Site Y,
    access-list inside_nat0_outbound extended permit ip Ghost_Flower_Inside 255.255.255.0 San_Mateo_Inside 255.255.255.0
    Hope that helps.
    Regards,
    Dinesh Moudgil

  • [SLOVED] All my USB not work after upgrade system.

    Hello all,
    I'm new in Arch, and i install my system with your LiveCD (2005).
    In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
    I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
    I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
    What i can to do to fix this?
    My dmesg:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
    Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
    BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
    BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
    BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
    BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
    BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
    BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
    BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
    BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
    BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
    BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
    BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.6 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    No AGP bridge found
    last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-E7FFF uncachable
    E8000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask E00000000 write-back
    1 base 200000000 mask FC0000000 write-back
    2 base 0C0000000 mask FC0000000 uncachable
    3 base 23F800000 mask FFF800000 uncachable
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    8 disabled
    9 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009ec00 (usable)
    modified: 000000000009ec00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000bf564000 (usable)
    modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
    modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
    modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
    modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
    modified: 00000000bf600000 - 00000000bf602000 (usable)
    modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
    modified: 00000000bf603000 - 00000000bf60b000 (reserved)
    modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
    modified: 00000000bf615000 - 00000000bf63e000 (reserved)
    modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
    modified: 00000000bf681000 - 00000000bf800000 (usable)
    modified: 00000000fed1c000 - 00000000fed20000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 000000023f800000 (usable)
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000fcda0] fcda0
    init_memory_mapping: 0000000000000000-00000000bf800000
    0000000000 - 00bf800000 page 2M
    kernel direct mapping tables up to bf800000 @ 16000-1a000
    init_memory_mapping: 0000000100000000-000000023f800000
    0100000000 - 023f800000 page 2M
    kernel direct mapping tables up to 23f800000 @ 18000-22000
    RAMDISK: 37c44000 - 37e19ab8
    ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
    ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
    ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
    ACPI: FACS 00000000bf60cf80 00040
    ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
    ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    ACPI: Local APIC address 0xfee00000
    (13 early reservations) ==> bootmem [0000000000 - 023f800000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
    #2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
    #3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
    #4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
    #5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
    #6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
    #7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
    #8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
    #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
    #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
    #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
    #12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
    [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x0023f800
    Movable zone start PFN for each node
    early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x0000009e
    0: 0x00000100 -> 0x000bf564
    0: 0x000bf600 -> 0x000bf602
    0: 0x000bf681 -> 0x000bf800
    0: 0x00100000 -> 0x0023f800
    On node 0 totalpages: 2092659
    DMA zone: 56 pages used for memmap
    DMA zone: 110 pages reserved
    DMA zone: 3816 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 765725 pages, LIFO batch:31
    Normal zone: 17892 pages used for memmap
    Normal zone: 1290780 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a701 base: 0xfed00000
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
    PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
    PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
    PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
    PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
    PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
    PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
    PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
    PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
    PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
    PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
    PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
    pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
    Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:768
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 83886080 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 3311.105 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
    Security Framework initialized
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 9 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
    using mwait in idle threads.
    Performance Events: Nehalem/Corei7 events, Intel PMU driver.
    ... version: 3
    ... bit width: 48
    ... generic registers: 8
    ... value mask: 0000ffffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 00000007000000ff
    ACPI: Core revision 20091214
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
    Booting Node 0, Processors #1
    CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    #2
    CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    #3 Ok.
    CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
    Brought up 4 CPUs
    Total of 4 processors activated (26499.22 BogoMIPS).
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
    ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
    pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
    pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.0: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.6: PME# disabled
    pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.7: PME# disabled
    pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
    pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.0: PME# disabled
    pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
    pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
    pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
    pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
    pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
    pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
    pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
    pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
    pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
    pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
    pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
    pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
    pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
    pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
    pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
    pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
    pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
    pci 0000:01:00.1: supports D1 D2
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
    pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
    pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
    pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
    pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
    pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
    pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
    pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    pci 0000:05:00.0: supports D1 D2
    pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:05:00.0: PME# disabled
    pci 0000:00:1c.6: PCI bridge to [bus 05-05]
    pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
    pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
    system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
    system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    system 00:02: [io 0x0290-0x029f] has been reserved
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:0b: [io 0x0400-0x0453] has been reserved
    system 00:0b: [io 0x0458-0x047f] has been reserved
    system 00:0b: [io 0x0500-0x057f] has been reserved
    system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
    system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
    system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    system 00:0c: [io 0x0454-0x0457] has been reserved
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io disabled]
    pci 0000:00:1c.0: bridge window [mem disabled]
    pci 0000:00:1c.0: bridge window [mem pref disabled]
    pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
    pci 0000:00:1c.4: bridge window [mem pref disabled]
    pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    pci 0000:00:1c.5: bridge window [io disabled]
    pci 0000:00:1c.5: bridge window [mem disabled]
    pci 0000:00:1c.5: bridge window [mem pref disabled]
    pci 0000:00:1c.6: PCI bridge to [bus 05-05]
    pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
    pci 0000:00:1c.6: bridge window [mem disabled]
    pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    pci 0000:06:00.0: PCI bridge to [bus 07-07]
    pci 0000:06:00.0: bridge window [io disabled]
    pci 0000:06:00.0: bridge window [mem disabled]
    pci 0000:06:00.0: bridge window [mem pref disabled]
    pci 0000:00:1c.7: PCI bridge to [bus 06-07]
    pci 0000:00:1c.7: bridge window [io disabled]
    pci 0000:00:1c.7: bridge window [mem disabled]
    pci 0000:00:1c.7: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.6: setting latency timer to 64
    pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.7: setting latency timer to 64
    pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:06:00.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
    pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
    pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
    pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
    pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    UDP hash table entries: 4096 (order: 5, 131072 bytes)
    UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1878k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
    software IO TLB at phys 0x979e000 - 0xd79e000
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1304838033.699:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 15956
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:01.0: setting latency timer to 64
    pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:1c.0: setting latency timer to 64
    pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:1c.4: setting latency timer to 64
    pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
    pcieport 0000:00:1c.5: setting latency timer to 64
    pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
    pcieport 0000:00:1c.6: setting latency timer to 64
    pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 484k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.2: version 2.13
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
    ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
    ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
    ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
    ata_piix 0000:00:1f.5: setting latency timer to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
    ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
    pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_acpi 0000:03:00.0: setting latency timer to 64
    pata_acpi 0000:03:00.0: PCI INT A disabled
    ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
    ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
    ata1.01: 234441648 sectors, multi 16: LBA48
    ata1.01: applying bridge limits
    ata1.00: configured for UDMA/133
    ata1.01: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.00: limiting SATA link speed to 1.5 Gbps
    ata2.00: limiting speed to MWDMA2:PIO3
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2.00: configured for MWDMA2
    ata2.00: qc timeout (cmd 0xa0)
    ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
    ata2.00: disabled
    ata2.00: hard resetting link
    ata2.01: hard resetting link
    ata2.01: failed to resume link (SControl 0)
    ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    ata2.01: SATA link down (SStatus 0 SControl 0)
    ata2.01: link offline, clearing class 3 to NONE
    ata2: EH complete
    pata_via 0000:03:00.0: version 0.3.4
    pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_via 0000:03:00.0: setting latency timer to 64
    scsi4 : pata_via
    scsi5 : pata_via
    ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
    ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
    sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb2 sdb3 sdb4 < sdb5 >
    sda: sda1 sda2
    sd 0:0:1:0: [sdb] Attached SCSI disk
    sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT4-fs (sdb5): mounted filesystem with ordered data mode
    <30>udev[901]: starting version 167
    Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
    Thanks a lots.
    Last edited by KingYes (2011-05-08 11:03:55)

    FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
    I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
    I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
    I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is  "10-evdev.conf" was the file I needed. Check both these files exist.

  • Flash does not work with Firefox following Windows Vista update 14/5/2014.

    Flash still works with IE9. I've carried out all steps in http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html, i.e. twice updated Flash to V13.0.0.214 (previously V13.0.0.206), activated Firefox Flash add-on, deleted browser data and cache and disabled hardware acceleration. Nothing fixes it! Vista SP2, Firefox 29.0.1.

    Apologies for vague "does not work" from me - and sorry for delay replying. What I understand to be "rich media content" did not display. For example, all text and images in this screen clip from www.metoffice.gov.uk appeared as a single blank grey rectangle. In other websites links displayed in a basic underlined font instead of rich formatted text/images, or video and audio links were completely missing from an otherwise fully rendered webpage.
    However in the last hour Firefox has starting behaving properly again without any further diagnostic efforts from me! For six days some graphics and links have not displayed in Firefox, yet IE9 has behaved perfectly. This has happened a few times before, normal service being restored (in hours rather than days) either by updating the Flash plug-in or for no apparent reason.
    Any thoughts in case of future re-occurrences would be appreciated. Thanks Pat for your time and help.

  • Auto Deploy and VCD Network Isolation - Not Working

    Hello,
    I have opened a support case about this issue, but the case is moving a lot slower than I would like to see. I thought I'd post here to see if anyone has ran into anything similar.
    We recently switched our 24-host vCloud cluster (more info about this cluster below) over to Auto-Deploy (was using boot from USB). After the switch, we had a few complaints from customers that use isolated networks. It turns out that only 4 of our 24 hosts were working properly with isolated networks. All 24-hosts are using the same auto-deploy image.
    When the hosts boot up, the vCloud Director web interface shows the following with green check marks: "Status", "Enabled", "Ready", "Available", and "VCD Network Isolation Capable".
    To get my other 20 hosts working, I disabled all 20 hosts in the vCloud interface, unprepared them, and prepared them. After this, network isolation worked for those 20 hosts. When I reboot one of the hosts, the host still looks like it's good in the interface, but network isolation doesn't work until I disable, unprepare, and prepare.
    Here is some more information about our environment:
    vCenter build 2001466
    ESXi Host Build 2702864
    VCD Build 5.5.2.2000523
    vShield Build 5.5.3
    Here is the Deploy Rule that the hosts are using:
    Name        : UCS-2.2.1-pcloud.5.5.aln
    PatternList : {oemstring=$SPT:ESX_PublicCloud_autod.2.2.x}
    ItemList    : {ESXi-5.5.0-autod-2.2.1.vshield}
    I have confirmed that this is indeed the profile being used by looking at the Summary tab for the hosts and seeing the listed Image Profile.
    And here is what's in that item:
    PowerCLI D:\ImageBuild> Get-EsxSoftwarePackage
    Name                     Version                        Vendor     Creation Date
    misc-cnic-register       1.72.1.v50.1i-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-lpfc820             8.2.3.1-129vmw.550.0.0.1331820 VMware     9/19/2013 6:0...
    scsi-megaraid-mbox       2.20.5.1-6vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    esx-xlibs                5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    lpfc                     10.0.100.1-1vmw.550.0.0.133... VMware     9/19/2013 6:0...
    mtip32xx-native          3.3.4-1vmw.550.1.15.1623387    VMware     2/22/2014 1:1...
    net-nx-nic               5.0.621-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    block-cciss              3.6.14-10vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    scsi-fnic                1.6.0.5-1OEM.500.0.0.472560    cisco      9/30/2013 11:...
    net-enic                 2.1.2.42-1OEM.500.0.0.472560   Cisco      9/5/2013 8:30...
    sata-sata-sil24          1.1-1vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    rste                     2.0.2.0088-4vmw.550.1.15.16... VMware     2/22/2014 1:1...
    elxnet                   10.0.100.0v-1vmw.550.0.0.13... VMware     9/19/2013 6:0...
    scsi-aacraid             1.1.5.1-9vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-cmd64x          0.2.5-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    net-cnic                 1.72.52.v55.1-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-adp94xx             1.0.8.12-6vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    net-be2net               4.6.100.0v-1vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-ixgbe                3.7.13.7.14iov-12vmw.550.2.... VMware     4/29/2015 6:4...
    net-igb                  5.0.5.1.1-1vmw.550.2.54.240... VMware     1/1/2015 8:00...
    epsec-mux                5.1.0-01814505                 VMware     5/13/2014 4:3...
    esx-base                 5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    ata-pata-sil680          0.4.8-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    ipmi-ipmi-msghandler     39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    ata-pata-hpt3x2n         0.3.4-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    scsi-megaraid-sas        5.34-9vmw.550.2.33.2068190     VMware     8/23/2014 1:5...
    scsi-mptsas              4.23.01.00-9vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-bnx2                 2.2.3d.v55.2-1vmw.550.0.0.1... VMware     9/19/2013 6:0...
    ata-pata-via             0.3.3-2vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    ima-qla4xxx              2.01.31-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-amd             0.3.10-3vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    ata-pata-serverworks     0.4.3-3vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    sata-sata-promise        2.12-3vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    sata-sata-nv             3.5-4vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    ipmi-ipmi-devintf        39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    scsi-ips                 7.12.05-4vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    sata-sata-svw            2.3-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    scsi-mptspi              4.23.01.00-9vmw.550.0.0.133... VMware     9/19/2013 6:0...
    net-e1000e               1.1.2-4vmw.550.1.15.1623387    VMware     2/22/2014 1:1...
    esx-xserver              5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    net-tg3                  3.123c.v55.5-1vmw.550.2.33.... VMware     8/23/2014 1:5...
    net-forcedeth            0.61-2vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    scsi-aic79xx             3.1-5vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    sata-ata-piix            2.12-10vmw.550.2.33.2068190    VMware     8/23/2014 1:5...
    scsi-bnx2i               2.72.11.v55.4-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    ohci-usb-ohci            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    scsi-qla4xxx             5.01.03.2-6vmw.550.0.0.1331820 VMware     9/19/2013 6:0...
    scsi-qla2xxx             902.k1.1-9vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    net-mlx4-core            1.9.7.0-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    ata-pata-atiixp          0.4.6-4vmw.550.0.0.1331820     VMware     9/19/2013 6:0...
    misc-drivers             5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    esx-dvfilter-generic-... 5.5.0-0.0.1331820              VMware     9/19/2013 6:0...
    ata-pata-pdc2027x        1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    qlnativefc               1.0.12.0-1vmw.550.0.0.1331820  VMware     9/19/2013 6:0...
    lsi-mr3                  0.255.03.01-2vmw.550.1.16.1... VMware     4/15/2014 9:0...
    vshield                  5.5.3-2172759                  VMware     9/30/2014 2:3...
    net-vmxnet3              1.1.3.0-3vmw.550.2.39.2143827  VMware     9/18/2014 11:...
    scsi-hpsa                5.5.0-44vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    tools-light              5.5.0-2.62.2702864             VMware     4/29/2015 6:4...
    scsi-mpt2sas             14.00.00.00-3vmw.550.1.15.1... VMware     2/22/2014 1:1...
    scsi-bnx2fc              1.72.53.v55.1-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    lsi-msgpt3               00.255.03.03-1vmw.550.1.15.... VMware     2/22/2014 1:1...
    net-e1000                8.0.3.1-3vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    xhci-xhci                1.0-2vmw.550.2.39.2143827      VMware     9/18/2014 11:...
    ipmi-ipmi-si-drv         39.1-4vmw.550.0.0.1331820      VMware     9/19/2013 6:0...
    sata-ahci                3.0-21vmw.550.2.54.2403361     VMware     1/1/2015 8:00...
    net-bnx2x                1.72.56.v55.2-1vmw.550.0.0.... VMware     9/19/2013 6:0...
    scsi-megaraid2           2.00.4-9vmw.550.0.0.1331820    VMware     9/19/2013 6:0...
    ehci-ehci-hcd            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    esx-tboot                5.5.0-2.33.2068190             VMware     8/23/2014 1:5...
    uhci-usb-uhci            1.0-3vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    sata-sata-sil            2.3-4vmw.550.0.0.1331820       VMware     9/19/2013 6:0...
    vcloud-agent             5.5.0-1280396                  VMware     8/17/2013 4:0...
    net-mlx4-en              1.9.7.0-1vmw.550.0.0.1331820   VMware     9/19/2013 6:0...
    And here is the output of testing the deploy rule compliance:
    PowerCLI D:\ImageBuild> Get-Cluster 0000000-ESXVCLOUDCL1.ALN | Get-VMHost |Test-
    DeployRuleSetCompliance
    VMHost               ItemList
    esx142269.vm.seo.... {}
    esx140622.vm.seo.... {}
    esx139784.vm.seo.... {}
    esx140617.vm.seo.... {}
    esx138793.vm.seo.... {}
    esx135523.vm.seo.... {}
    esx138945.vm.seo.... {}
    esx138794.vm.seo.... {}
    esx139783.vm.seo.... {}
    esx140309.vm.seo.... {}
    esx140310.vm.seo.... {}
    esx140311.vm.seo.... {}
    esx140313.vm.seo.... {}
    esx140339.vm.seo.... {}
    esx140614.vm.seo.... {}
    esx140615.vm.seo.... {}
    esx140616.vm.seo.... {}
    esx140618.vm.seo.... {}
    esx140619.vm.seo.... {}
    esx140621.vm.seo.... {}
    esx141947.vm.seo.... {}
    esx141945.vm.seo.... {}
    esx142271.vm.seo.... {}
    esx142270.vm.seo.... {}
    Here is another vib list from a host:
    ~ # esxcli software vib list
    Name                           Version                                Vendor  Acceptance Level  Install Date
    net-enic                       2.1.2.42-1OEM.500.0.0.472560           Cisco   VMwareCertified   -
    ata-pata-amd                   0.3.10-3vmw.550.0.0.1331820            VMware  VMwareCertified   -
    ata-pata-atiixp                0.4.6-4vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-cmd64x                0.2.5-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-hpt3x2n               0.3.4-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-pdc2027x              1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    ata-pata-serverworks           0.4.3-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-sil680                0.4.8-3vmw.550.0.0.1331820             VMware  VMwareCertified   -
    ata-pata-via                   0.3.3-2vmw.550.0.0.1331820             VMware  VMwareCertified   -
    block-cciss                    3.6.14-10vmw.550.0.0.1331820           VMware  VMwareCertified   -
    ehci-ehci-hcd                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    elxnet                         10.0.100.0v-1vmw.550.0.0.1331820       VMware  VMwareCertified   -
    epsec-mux                      5.1.0-01814505                         VMware  VMwareCertified   -
    esx-base                       5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    esx-dvfilter-generic-fastpath  5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    esx-tboot                      5.5.0-2.33.2068190                     VMware  VMwareCertified   -
    esx-xlibs                      5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    esx-xserver                    5.5.0-0.0.1331820                      VMware  VMwareCertified   -
    ima-qla4xxx                    2.01.31-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    ipmi-ipmi-devintf              39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    ipmi-ipmi-msghandler           39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    ipmi-ipmi-si-drv               39.1-4vmw.550.0.0.1331820              VMware  VMwareCertified   -
    lpfc                           10.0.100.1-1vmw.550.0.0.1331820        VMware  VMwareCertified   -
    lsi-mr3                        0.255.03.01-2vmw.550.1.16.1746018      VMware  VMwareCertified   -
    lsi-msgpt3                     00.255.03.03-1vmw.550.1.15.1623387     VMware  VMwareCertified   -
    misc-cnic-register             1.72.1.v50.1i-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    misc-drivers                   5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    mtip32xx-native                3.3.4-1vmw.550.1.15.1623387            VMware  VMwareCertified   -
    net-be2net                     4.6.100.0v-1vmw.550.0.0.1331820        VMware  VMwareCertified   -
    net-bnx2                       2.2.3d.v55.2-1vmw.550.0.0.1331820      VMware  VMwareCertified   -
    net-bnx2x                      1.72.56.v55.2-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    net-cnic                       1.72.52.v55.1-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    net-e1000                      8.0.3.1-3vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-e1000e                     1.1.2-4vmw.550.1.15.1623387            VMware  VMwareCertified   -
    net-forcedeth                  0.61-2vmw.550.0.0.1331820              VMware  VMwareCertified   -
    net-igb                        5.0.5.1.1-1vmw.550.2.54.2403361        VMware  VMwareCertified   -
    net-ixgbe                      3.7.13.7.14iov-12vmw.550.2.62.2702864  VMware  VMwareCertified   -
    net-mlx4-core                  1.9.7.0-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-mlx4-en                    1.9.7.0-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-nx-nic                     5.0.621-1vmw.550.0.0.1331820           VMware  VMwareCertified   -
    net-tg3                        3.123c.v55.5-1vmw.550.2.33.2068190     VMware  VMwareCertified   -
    net-vmxnet3                    1.1.3.0-3vmw.550.2.39.2143827          VMware  VMwareCertified   -
    ohci-usb-ohci                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    qlnativefc                     1.0.12.0-1vmw.550.0.0.1331820          VMware  VMwareCertified   -
    rste                           2.0.2.0088-4vmw.550.1.15.1623387       VMware  VMwareCertified   -
    sata-ahci                      3.0-21vmw.550.2.54.2403361             VMware  VMwareCertified   -
    sata-ata-piix                  2.12-10vmw.550.2.33.2068190            VMware  VMwareCertified   -
    sata-sata-nv                   3.5-4vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-promise              2.12-3vmw.550.0.0.1331820              VMware  VMwareCertified   -
    sata-sata-sil24                1.1-1vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-sil                  2.3-4vmw.550.0.0.1331820               VMware  VMwareCertified   -
    sata-sata-svw                  2.3-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    scsi-aacraid                   1.1.5.1-9vmw.550.0.0.1331820           VMware  VMwareCertified   -
    scsi-adp94xx                   1.0.8.12-6vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-aic79xx                   3.1-5vmw.550.0.0.1331820               VMware  VMwareCertified   -
    scsi-bnx2fc                    1.72.53.v55.1-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    scsi-bnx2i                     2.72.11.v55.4-1vmw.550.0.0.1331820     VMware  VMwareCertified   -
    scsi-hpsa                      5.5.0-44vmw.550.0.0.1331820            VMware  VMwareCertified   -
    scsi-ips                       7.12.05-4vmw.550.0.0.1331820           VMware  VMwareCertified   -
    scsi-lpfc820                   8.2.3.1-129vmw.550.0.0.1331820         VMware  VMwareCertified   -
    scsi-megaraid-mbox             2.20.5.1-6vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-megaraid-sas              5.34-9vmw.550.2.33.2068190             VMware  VMwareCertified   -
    scsi-megaraid2                 2.00.4-9vmw.550.0.0.1331820            VMware  VMwareCertified   -
    scsi-mpt2sas                   14.00.00.00-3vmw.550.1.15.1623387      VMware  VMwareCertified   -
    scsi-mptsas                    4.23.01.00-9vmw.550.0.0.1331820        VMware  VMwareCertified   -
    scsi-mptspi                    4.23.01.00-9vmw.550.0.0.1331820        VMware  VMwareCertified   -
    scsi-qla2xxx                   902.k1.1-9vmw.550.0.0.1331820          VMware  VMwareCertified   -
    scsi-qla4xxx                   5.01.03.2-6vmw.550.0.0.1331820         VMware  VMwareCertified   -
    uhci-usb-uhci                  1.0-3vmw.550.0.0.1331820               VMware  VMwareCertified   -
    vcloud-agent                   5.5.0-1280396                          VMware  VMwareCertified   -
    vmware-fdm                     5.5.0-2001466                          VMware  VMwareCertified   -
    vshield                        5.5.3-2172759                          VMware  VMwareCertified   -
    xhci-xhci                      1.0-2vmw.550.2.39.2143827              VMware  VMwareCertified   -
    tools-light                    5.5.0-2.62.2702864                     VMware  VMwareCertified   -
    scsi-fnic                      1.6.0.5-1OEM.500.0.0.472560            cisco   VMwareCertified   -
    Any help is appreciated. Thanks.

    Right now, on my test host (that is not working), I have two VMs, one named "Test 1" and the other "Test 2" They only have an isolated network on them (named "Test Isolated Network") that is in my VDC, and pings do not work between them. If I move them to any other host (that have been unprepared and prepared), pings work. I can move both to the same host, or different hosts.
    Here is the fence info on this host, I'm not really sure how to interpret this:
    ~ # esxcli vcloud fence getfenceinfo
       Module Parameters:
            Host Key: 0x104b0
            Configured LAN MTUs:
            +------------------------------------------------------------------------------------------+
            | LAN ID |    1    2    3    4    5    6    7    8    9   10    -    -    -    -    -    - |
            |    MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500    -    -    -    -    -    - |
            +------------------------------------------------------------------------------------------+
       Active Ports:
            +-----------------------------------------+
            |     ID       |    OPI    | LanID |  MTU |
            +-----------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |     4 | 1500 |
            | 410b1d4cfde0 | 01,0001a2 |     4 | 1500 |
            +-----------------------------------------+
       Switch State:
            +-----------------------------------------------------+
            |   Inner MAC    |   Outer MAC   | used | age | seen  |
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4ce7d0 +
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4cfde0 +
            | 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1  | 1  | 1 |
            +-----------------------------------------------------+
       Port Statistics Summary:
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            |       Identity           |               To VM dropped                         | To VM passed    |     From VM dropped                        |                 From VM passed                      |  Reflect        |
            |   Port ID    | Fence ID  | total  | misunf | misfen | stored | frag   | other  | fenced | join   | unfen  | csum   | frag   | GVT    | other  | fenced | tso    | frag   | csum   | GVT    | ufport | pass   |  error |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |   3991 |      2 |   3976 |      0 |      0 |      0 |     13 |      0 |      0 |      0 |      0 |      0 |      0 |    679 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4cfde0 | 01,0001a2 |   4478 |      2 |   3860 |      0 |      0 |      0 |    616 |      0 |      0 |      0 |      0 |      0 |      0 |    626 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
    And here is the output of the command a little while later on the same host (while my test pings are going)
    ~ # esxcli vcloud fence getfenceinfo
       Module Parameters:
            Host Key: 0x104b0
            Configured LAN MTUs:
            +------------------------------------------------------------------------------------------+
            | LAN ID |    1    2    3    4    5    6    7    8    9   10    -    -    -    -    -    - |
            |    MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500    -    -    -    -    -    - |
            +------------------------------------------------------------------------------------------+
       Active Ports:
            +-----------------------------------------+
            |     ID       |    OPI    | LanID |  MTU |
            +-----------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |     4 | 1500 |
            | 410b1d4cfde0 | 01,0001a2 |     4 | 1500 |
            +-----------------------------------------+
       Switch State:
            +-----------------------------------------------------+
            |   Inner MAC    |   Outer MAC   | used | age | seen  |
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4ce7d0 +
            +-----------------------------------------------------+
            + ............................... Port:0x410b1d4cfde0 +
            | 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1  | 1  | 1 |
            +-----------------------------------------------------+
       Port Statistics Summary:
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            |       Identity           |               To VM dropped                         | To VM passed    |     From VM dropped                        |                 From VM passed                      |  Reflect        |
            |   Port ID    | Fence ID  | total  | misunf | misfen | stored | frag   | other  | fenced | join   | unfen  | csum   | frag   | GVT    | other  | fenced | tso    | frag   | csum   | GVT    | ufport | pass   |  error |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4ce7d0 | 01,0001a2 |   4696 |      2 |   4681 |      0 |      0 |      0 |     13 |      0 |      0 |      0 |      0 |      0 |      0 |    796 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
            | 410b1d4cfde0 | 01,0001a2 |   5300 |      2 |   4565 |      0 |      0 |      0 |    733 |      0 |      0 |      0 |      0 |      0 |      0 |    743 |      0 |      0 |      0 |      0 |      0 |      0 |      0 |
            +-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
    Looking at the VDS, the Maximum MTU is set to 1500. Looking at dvs.VCDVSTest Isolated Network-ca9a45c9-1dec-4f95-8b96-68d9c05b2a5d, I see it's VLAN is set to 2535 (which matches the network pool settings) and number of ports is 16

Maybe you are looking for

  • Web pages are not fully functional on iPad

    Until recently I was enjoying my experience with my iPad 2. I went to Netflix to write a review for a film and was unable to do so.  For whatever reason, I am unable to select the desired stars for my rating.  While obviously this is not a deal break

  • Procedure successful when using dbms_job, but fails in a shell script

    I have a procedure which is throwing the following error when run from a shell script. This procedure completes successfully when run using dbms_job ORA-00164 distributed autonomous transaction disallowed within migratable distributed transaction

  • Attachment  Document data from LEAD

    Hi Experts, I'm creating LEAD with attachment douments in it. Now I want to access the attachment document related data from that LEAD . How Do I need proceed ? Do we have some standard Function Module to do that ?

  • Kernel Errors on start up

    When I reboot my Macbook Pro (10.4.11) I am getting a Kernal Error while in boot up mode. It'll ask me to restart and the when restarted about half way into loading Tiger, it'll error out. My MAC has been working flawless for the last 2 years or so a

  • [JS CS3] Conflict between palettes and panels

    Hello, I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long. I have a window of the palette type. This palette has buttons and radio buttons. The buttons