RV042 PPPoE issues

I must say that i am totally impressed by the product, i have around 3 sites and out of 3 sites i was able to make a tunnel between two sites. Now when i went to to third site, first thing that surprised me is that PPPoE doesn't work, it keeps showing WAN IP as 0.0.0.0 and when i connect the same connection in other broadband routers or configure it on my windows 7 directly, it works fine but only RV042 it doesn't work at all. Than i thought of configuring RV042 as DMZ but now i am not able to create the VPN tunnel, it keeps showing RESOLVING HOSTNAME for local dyndns url. Please help. Thank you.
Incase if somebody needs a diagram.

Alright i got it working :D, it was my fault and the fault was so small that i could not see it keeping it right in front of me. Well the PPPoE doesn't work so i gave DMZ one more try and this time i realized that the INTERFACE while creating tunnel was WAN1 where it should be WAN2. That's it, its working now. Thank you very much

Similar Messages

RV042 multiple issues

Hi all,
I've been having a lot difficulties to get Cisco RV042 v 3 run on both WLAN ports. I've tryed in Smart Backup Link and Load Balancing .... nothing.
What I want to do is:
1 web server in LAN lets say IP 192.168.15.2
1 dns server in LAN lets say IP 192.168.15.4
I want to have the router running as Smart Backup Link in case one of the internet connections fails (I will say that the DNS server handles most of the domain names on the web server so it needs to be publicly available as well, and the main domain name of the web server is managed by independent DNS server somwhere in internet, so it has mechanism that can be use to change the entries let say DNS round robin way).
The issues that i had so far.
1. WLAN1 with PPPOE and WLAN2 with static ip by the second provider LAN fasion, ports forwarded to the web and the dns servers - NOT accesible. Router firmware latest version 4.
2. WLAN1 with static ip by the second provider LAN fashion, network normal operating but cannot access the server on port 80.
Please, help. I don't know how is possible in no case this router to work properly, I already asked in support forum of cisco and the only thing I received was redirecting to another support forum!!!!!

stoyan,
If you still having trouble please give us a call @ 1-866-606-1866 and open a support case so we can assist.
Thanks
Jasbryan
Cisco Support Engineer

RV042 PPPoA via bridged thompson 595v7

Hi,
I have recently purchased the rv042, I have two broadband connections both PPPoA, the first has a static IP and connects with the rv042 no problem (via a Thompson 585v7 in bridge mode).
The second has a dynamic IP. I have set the Thompson 585 'modem' in to bridge mode and when I connect via Ethernet to a PC, the PC is given an external IP...ie bridge mode working correctly.
In the rv042 I set the WAN2 connection type as PPPoE, however the rv043 requires a username and password and my ISP does not use one.
When I click save setting on the rv042 the display is updated with some characters in the password field, even though I left them blank.
I have followed the full procedure from this article:
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a369fb.shtml
expect entering the username and password as there isn't one.
My ISP's settings can be seen here:
http://www.beusergroup.co.uk/technotes/index.php?title=Settings_for_other_routers
RV042 firmware version: 1.3.13.02-tm
Thompson routers both have latest firmware.
Any support with this issue would be greatly appreciated.

Linksys EA6400 - PPPOE issue

I have the following problem with my router : The ISP provides 500mb/s and my router only outputs on wire or wireless 200-230mb/s.
The set up :
1) Router Linksys EA6400
firmware : 1.1.40.160989
2) Network cable : Gigabit
3) Wireless adaptor : Linksys WUSB6300
4) PC : i5 4690 ; 8GB RAM 2400MHz ; SSHD 1 TB; Motherboard Gygabite Z97
5) Connection on router PPPOE ; ISP : RDS Romania.
ISSUE : I always get no more than 230mb/s on tests (www.speedtest.net; or other tests sites and benckmarks) wired or wireless I have the same speed “limit”. The ISP came and tested my connection and on the router INPUT (internet) I have 500mb/s no fluctuations.
Also I have drops on wireless after a couple of hours of continuous internet traffic.
What I have tried :
Rebooting router
Factory reset
Firmware downgrade and upgrade again
-Nothing worked
Does the router have conflicts with the PPPOE connection ?
Might the router be broken ?
Please help me with this issue.

Hi,
@chadster766 : I have tried also these setting but no improvement.
@bigdave240 : Here is the tests results that I have done :
ISP Direct Wired result : (rush hour tests
Last Result:
Download Speed: 401754 kbps (50219.3 KB/sec transfer rate)
Upload Speed: 14580 kbps (1822.5 KB/sec transfer rate)
Latency: 16 ms
Jitter: 1 ms
08.02.2015, 19:35:13
Router Wired result :
Last Result:
Download Speed: 158115 kbps (19764.4 KB/sec transfer rate)
Upload Speed: 99675 kbps (12459.4 KB/sec transfer rate)
Latency: 16 ms
Jitter: 1 ms
08.02.2015, 19:39:37
Router Wireless result :
Last Result:
Download Speed: 131282 kbps (16410.3 KB/sec transfer rate)
Upload Speed: 103160 kbps (12895 KB/sec transfer rate)
Latency: 18 ms
Jitter: 7 ms
08.02.2015, 19:55:32
When tested NOT in rush hour, and get @500mb/s from ISP wired , the results from the router wired/wireless are @250mb/s.
You can see from the results that ISP @400mb/s , the output from the router it's @150mb/s , it's somehow truncated.
What other settings could I try before sending this router to warranty or customer protection?
Maybe the high speed PPPOE connection it's not supported by this router ?
Kind regards.

2811 w/ WIC-1ADSL-I-DG PPPoA issue

Hello:
I have been trying to test our new office gear prior to move, specifically the DSL WIC card.
It seems I have all the config correct but I fail to negotiate link and I am not getting much info from a debug standpoint leading me to believe: -1- PPP isn't quite set up correctly -2- the WIC is possibly bad.
Would it be possible for someone to review my config since I can find nothing on the web that serves as a decent example of using this WIC card with Qwest?
DETAILS:
Info pulled from my old Actiontec modem for testing purposes:
VPI/VCI = 0/32
DSL Mode = MMODE
DSL Negotiated Mode = T1.413
Up/down = 7168/896
ATM QoS class = UBR
The connection is doing PPPoA, evidently it is using PAP per my ISP (qwest does the local loop, my own ISP the VC termination and routing)
Cisco 2811 and WIC setup:
interface ATM0/1/0
description QWEST DSL - circuit id:
no ip address
no ip mroute-cache
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log
pvc 0/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Dialer1
ip address negotiated
encapsulation ppp
dialer pool 1
ppp authentication pap
ppp pap sent-username <username_goes_here> password 0 <passwd_goes_here>
Additionally, it would be helpful if you provided what all the 'Modem States' are. For example, Modem state = 0x8 is in many docs but you don't say anything about 0x3. Its helpful to know all the codes for Modem state if your going to recommend doing debugs of atm events for troubleshooting. Hence, the post to the forum. I can't get link and everything appears to be set up properly.
Thanks for the insight/answers.

No, I am afraid we don't do ADSL over ISDN. My boss ordered the equipment and I think the reseller wasn't too bright.
So would I be correct that I am going to have to have a WIC-1ADSL or a HWIC-1ADSL?
I see that this ADSL over ISDN card we have currently does support T1.413, but given I can't get link I am guessing that is only T1.413 when over ISDN so I have to use one of the other types of WICs listed above if this is over POTS.
If someone from Cisco or otherwise can confirm that would be great so I can go ahead and get the right card shipped to us ASAP.
Thanks for the assist,
-Jeff
Thanks for pointing that out. I suspected it might be the issue but have not ordered or touched many DSL WICs in my day, only the bigger chassis's that terminate the traffic on the provider end.

RV042 caching issues?

Hello,
After installing RV042 I've started expiriencing strange issue. It looks like there is a caching mechanism inside the router. Almost every time I enter a page it loads with no CSS styles or images. I have to hit refresh button several times to get the page displayed properly. The same problem happens using any browser and on each machine connected to this router: Vista, XP and 7. Here is an example how it looks when I try to enter ebay for the first session:
Here is how it looks after I hit refresh button:
Any ideas? Thanks!
CISCO as usual is extremely "useful" :-/

Well, I can honestly say that, me, personally, have never seing something like this before.
In any case, what I can recommend is to check if you are running the latest version of the firmware, which is 1.3.12.19-tm.
Here is the link to download it. http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Small+Business+Router+Firmware&mdfid=282414010&treeName=Routers&mdfLevel=MODEL&url=null&modelName=Cisco+RV042+4-port+10%2F100+VPN+Router+-+Dual+WAN&isPlatform=N&treeMdfId=268437899&modifmdfid=null&imname=&hybrid=Y&imst=N
When you do the upgrade, reset the device to factory defaults and reconfigure it manually.
That may take care of the issue, if it doesn't then give us a call at 866-606-1866.
Hope this helps

RV042 & VOIP Issues

Hello everyone. I have a client that recently purchased some RV042 routers to establish VPN connections between their offices. The VPN works great and the only issue we have right now is with their IP phone system. The problem that is occuring is that the phones work fine, but they only get 1 way audio on the phones from the remote locations. Discussing the phone system with their phone support guy we found that ALG (Application Layer Gateway) is usually the culprit here. Here's my problem with this, there doesn't seem to be a setting in the RV042 router to shut off ALG. Am I missing something here? The current firmware on the main router is version 4.0.4.02-tm does anyone know if the latest firmware has the option of turning off ALG?
Thank you for any help you can provide. I appreciate it.

RV0xx does not support SIP ALG.
Firmware 4.1.1.01 fixed an issue with SIP. Perhaps you want to give it a try.

AirPort Extreme PPPoE issues after disconnect

Hi all...
I seem to have an issue with my AirPort.... Brand new, out of the box, I plugged it in and it worked using my old configs (It replaced a Linksys WRT54G) and all was well. I unplugged it when there was a lightning storm coming ( I am on wireless broadband so I have a dish on my roof for the net... did not want it to fry another router... this has happened 3 times even with an APC in line with the ethernet cables). After the storm passed, I plugged it back in and voila... unable to find PPPoE server. Now, the only way I can connect is to connect it through the old Linksys box ( it goes from the dish to the Linksys box set to PPPoE always on to the AirPort via Ethernet). I have performed a hard reset and manually configured it, however it still does not find the AirPort....Any suggestions?

Spent 8 hours last night with same issues. All issues really started after the update. I had just bought the new dual band, set up was smooth, then all **** broke loose after the X.1 update. A couple of things I noticed. 1) Same issues you had that if the computers sat, it took a good 5 minutes to get the network up again or "see" it 2) I use comcast and I have noticed that the dynamic is causing issues between the AE and modem (post update) 3) Every time I try to change settings on the AE to add Guest network, the whole network crashes and I have to go to complete hard boot, reset AE and do power start all the way out. 4) Comcast rep had me power cycle all of my hard wire gigabit routers off the AE. I was having issues until I did this. Apparently the AE keeps IP if you feed routers off of it. Going to revert to 7.4 right now.

RV042 Firewall issues with windows 8

Hello,
I recently bought my daughter a refurshed dell 17" laptop which has Windows 8 home edition on it. She also has another smaller laptop with windows 7 on it, an X-box-360 and a PS3 all connected to this RV042 Business router.
I do not have access to the firmware version of the RV042. I believe it was updated in 2011 or early 2012.
We found out that with the RV042 firewall set to ON, she is UNABLE to hit her college website with the new win 8 computer
She CAN go to the college web site with the smaller win 7 computer when the firewall is off or on.
The college website is https://
The win 8 computer will allow google searches, but when you click on any of the links, it will not load.
With the win 8 computer, facebook will not load, MSN and Hotmail will not load.
Disable firewall, and most (if not all) items that did not work, magically DO work when the RV042 firewall is disabled for the win 8 laptop.
Anyone else having issues with with win 8 home edition and the RV042 firewall enabled? Is there a "simple" cure for this, other than slicking the laptop and putting win 7 on it?

We've have already tried compatibility mode, lowering the security setting to minimum.
Dell technical support has given up, they are supposedly sending my daughter a brand spanking new wireless router at no cost to close the ticket. It's a sweet laptop that I got for a steal (17" viewable touch screen, 1TB drive, 6 GB RAM, i5 chip) and I don't want to return it becuase i will not find another for $435.00.
I have two newer cisco VPN style routers here, and the laptop in question runs absolutely fine here on the highest settings and without me altering my network at all. Don't have a clue what the issue is with the RV042, the laptop and Win8.
If I find a solution I will let everyone know.

Internet / RV042 Connectivity Issue

I have a Linksys RV042 VPN Router. I am having problems loading attachments in Webmail. Sending attachments is not the only place that I have seen issues, but it is the easiest to reproduce.
Basically with the router in place, I can not send any type or size of attachment using the web mail interface. I get the spinning wheel of infinity.
This holds true on my Macbook Pro, Intel Mac Mini, and on my G5 Xserve. However, my wifes PC does not seem to be effected.
I have tried a number of modifications to the settings of the router to include turning off the firewall all together. All with the same results.
I also have upgraded to the latest firmware on the router and set it back to factory defaults and then reset it up for my network. Same results.
However, if I completely bypass the router, all works fine.
Wish I could figure this one out. Not a fan of dropping my networks pants, so to speak. And I have also lost my VPN capabilities.

BDAqua, this seems to have done the trick.
Actually what I did is change the MTU on the router itself. I have tested all Macs, to include the wireless one, and all works fine.
Thanks very much for you expertise and help!

WRVS4400N PPPoE issue after v2.0.2.1 firmware upgrade

Hi, I have a WRVS4400N v2 router which was working perfect until I've upgraded the firmware to v2.0.2.1. Since then, my router does not save anymore the PPPoE password so I am not able to connect. Does anybody know how can I fix this?

Simon, nothing succedeed. I've cleared the browser cache and also downgraded the firmware from v2.0.2.1 to v2.0.1.3. Basically the router does not save any password under PPPoE menu. I've reset it to factory default, same result.
After filling the password and saving, before router reboot, I see the connection type changing from PPPoE to Automatically connect - DHCP. I do not know if this mean anything or not. Do you have any other ideea?

RV042 Config Issues

Greetings,
I have the following network.
A Satellite Internet Connection into WAN1 of the RV042 IP = 99.196.170.134 DNS WAN1 = 12.213.112.61
A Verizon USB Modem via a cradlepoint router into WAN2 of the RV042 IP = 192.168.0.196 DNS WAN2 = 192.168.0.1
(For testing connected each one of these independently to a laptop and verified operation)
The RV042 is set up as a GatewayThe default Gateway is checked for both WAN1 and WAN2
DDNS is off for both WAN1 and WAN2
LAN IP = 172.16.0.1
Subnet 255.255.255.0
Both WAN1 and WAN2 Obtain IP address automatically
If I set the RV042 to Smart Link Backup WAN1 I can access the web but NOT email via outlook. Outlook says it failed contact your network administrator.
If I set the RV042 to Load Balancing I can access email via Outlook but can not access the web. Web pages timeout when trying to lookup a doamin name
I prefer to have the RV042 set up for load balancing.
Please help me sort this out.
Thank you,
Ron Wensley

Never mind I figured it out.

PPPoE issue on 7206VXR

Trying to configure a PPPoE session on a 7206VXR however all the commands such as ppp on an eth interface, vpdn in global config are missing.
The IOS says that its supported:
ROM: System Bootstrap, Version 12.3(4r)T3, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(9), RELEASE SOFTWARE (fc2)
System image file is "disk2:c7200-pk9u2-mz.123-14.T3.bin"
which is service provider with ipsec etc..
Am I missing something obvious? I also have a 8000 user license but at the moment in the labs only need a couple of lines and the docs say <1000 no license needs to be enabled.

GP, Thanks for that, I have access to the tool and thought I'd run it through, just checked again and got:
Image Name DRAM Flash Life Cycle
c7200-pk9u2-mz.12.3-14.T 128 48 ED
AAA Double Authentication Secured by Absolute Timeout
Accounting server connectivity failure and recovery detection
ACL - Support for Non-Contiguous Port Ranges on an ACE
PPP MLP MRRU negotiation configuration
PPPoE Session Limit per NAS port
So must have seen that PPPoE session Limit per NAS port and registered it as supporting pppoE.
Currently getting the distributor to provide your suggested.
It's current use is only as a B-RAS within an Inter-operability model and so we were trying as many full features northbound into a core of a err chinese router :)
Will let you know how it works.
Craig.

WRVS4400N PPPoE issues

Hello,
Few days ago i bought WRVS4400N and i tried to connect it to my ISP which is working only on PPPoE connection. Unfortunately we wasn't able to make it work. Please see below the log of the router when i try to connect via PPPoE:
Plugin pppoe loaded.
PPPoE Plugin Initialized
Plugin pppoe called.
pppd 2.4.1 started by root, uid 0
Sending PADI
HOST_UNIQ successful match
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:08:fc (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:08:fc (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002e (PADO) PPPoE tag: type=0102 length=0006 (AC Name) data (UTF-8): r1-bor PPPoE tag: type=0101 length=0000 (Service name) PPP
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:09:8e (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x002e (PADO) PPPoE tag: type=0102 length=0006 (AC Name) data (UTF-8): r5-bor PPPoE tag: type=0101 length=0000 (Service name) PPP
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c8:09:8e (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
HOST_UNIQ successful match
Unexpected packet: Ether addr: 00:16:76:c7:f4:a2 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0030 (PADO) PPPoE tag: type=0102 length=0008 (AC Name) data (UTF-8): raspppoe PPPoE tag: type=0101 length=0000 (Service name) P
Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Couldn't get channel number: Transport endpoint is not connected
Doing disconnect
Exit.
Please let me know if you need additional info. Your help is really appriciated!! Thank you!!!

Hi All,
I have an similar problem.
I have problem connecting router to internet. I try to connect with other router Netgear WPN824, Linksys WRT54G, Allied Telesyn AT-AR220E and with this working without any problem.
I have static IP but I need PPPoE connection with username and password.
Router Cisco Linksys WRVS4400Nv2 with firmware 2.0.0.8-ETSI, CPU STAR 9202, DRAM 64MB, FLASH 16MB.
My connection is ADSL 10Mbps/768kbps and ISP (Slovenia - SiOL) need PPPoE connection.
Modem is Sagem Fast 3344, Bridged, DHCP disabled, Firewall Disabled, Ethernet Status Automatic Speed Auto DUPLEX.
Please help me with this router connection.
Thanks.
This is the LOG of the router:
Jan 1 00:00:07 - bind 0.0.0.0 - Address already in use
Jan 1 00:00:07 - started as root without requesting chroot(), warning only
Jan 1 00:00:07 - starting on , port 80
Jan 1 00:00:20 - Plugin pppoe loaded.
Jan 1 00:00:20 - PPPoE Plugin Initialized
Jan 1 00:00:20 - Plugin pppoe called.
Jan 1 00:00:21 - pppd 2.4.1 started by root, uid 0
Jan 1 00:00:21 - Sending PADI
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:21 - HOST_UNIQ successful match
Jan 1 00:00:21 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:21 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:00:21 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:00:21 - Doing disconnect
Jan 1 00:00:21 - Exit.
Jan 1 00:00:21 - br0: port 2(eth2) entering forwarding state
Jan 1 00:00:21 - br0: topology change detected, propagating
Jan 1 00:00:21 - br0: port 1(eth0) entering forwarding state
Jan 1 00:00:21 - br0: topology change detected, propagating
Jan 1 00:00:27 - download uses obsolete (PF_INET,SOCK_PACKET)
Jan 1 00:00:28 - Kris Linux Driver:Version=v2.00 for CISCO's RVSR000,WRVS4400N & WRVS4400Nv2(Feb 18 2009:18:16:43)
Jan 1 00:00:28 - Enable Tcp Connection Tracking
Jan 1 00:00:28 - The Total Used Table Memory Size = 0xFB4878 = 16082K
Jan 1 00:00:28 - Trying to free free IRQ16
Jan 1 00:00:28 - Trying to free free IRQ17
Jan 1 00:00:29 - version 0.7.2 started
Jan 1 00:00:33 - Kris is unlocked
Jan 1 00:00:33 - Reset IDP Engine!!!
Jan 1 00:00:33 - The Total Used Table Memory Size = 0xFB4878 = 16082K
Jan 1 00:00:33 - Enable DDOS Detection!!
Jan 1 00:00:33 - Enable PortScan Detection!!
Jan 1 00:00:33 - Enable IP Sweep Detection!!
Jan 1 00:00:50 - Plugin pppoe loaded.
Jan 1 00:00:50 - PPPoE Plugin Initialized
Jan 1 00:00:50 - Plugin pppoe called.
Jan 1 00:00:50 - pppd 2.4.1 started by root, uid 0
Jan 1 00:00:50 - Sending PADI
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:50 - HOST_UNIQ successful match
Jan 1 00:00:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:00:50 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:00:50 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:00:50 - Doing disconnect
Jan 1 00:00:50 - Exit.
Jan 1 00:01:20 - Plugin pppoe loaded.
Jan 1 00:01:20 - PPPoE Plugin Initialized
Jan 1 00:01:20 - Plugin pppoe called.
Jan 1 00:01:20 - pppd 2.4.1 started by root, uid 0
Jan 1 00:01:20 - Sending PADI
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:20 - HOST_UNIQ successful match
Jan 1 00:01:20 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:20 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:01:20 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:01:20 - Doing disconnect
Jan 1 00:01:20 - Exit.
Jan 1 00:01:50 - Plugin pppoe loaded.
Jan 1 00:01:50 - PPPoE Plugin Initialized
Jan 1 00:01:50 - Plugin pppoe called.
Jan 1 00:01:50 - pppd 2.4.1 started by root, uid 0
Jan 1 00:01:50 - Sending PADI
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0046 (PADO) PPPoE tag: type=0102 length=0014 (AC Name) data (UTF-8): E320-BRAS-LJ-DRAVLJE PPPoE tag: type=0103 length=0004 (Hos
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:50 - HOST_UNIQ successful match
Jan 1 00:01:50 - Unexpected packet: Ether addr: 00:19:4b:60:ab:4d (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x0049 (PADO) PPPoE tag: type=0102 length=0017 (AC Name) data (UTF-8): E320-BRAS-LJ-CIGALETOVA PPPoE tag: type=0103 length=0004 (
Jan 1 00:01:50 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x427d8
Jan 1 00:01:50 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 00:01:50 - Doing disconnect
Jan 1 00:01:50 - Exit.

Another PPPoE issue...

When configuring an Airport Extreme, or Express, to connect DSL with PPPoE;
should the "Enable PPP Dial-in; in the Airport Admin Utility "configure" tab be selected; to instruct Airport to connect PPPoE?

should the "Enable PPP Dial-in; in the Airport Admin Utility "configure" tab be selected; to instruct Airport to connect PPPoE?
No, that option allows you to use the AEBS's dial-up phone port to access the AEBS. Instead, you want to go to the Internet tab and select "PPP over Ethernet (PPPoE)" in the "Connect using" window.

RV042 PPPoE issues

Similar Messages

Maybe you are looking for