RV042 Protectlink did not work afer reboot
Hi, I have activated Protectlink Web. The service is excellent im very pleased about it. But today i started to get "router is busy" in all pages, so we restarted the router. That problem was solved but now the the web Protection is no longer working. It says activated but licence status says waiting.
I have read in other topic that is a firmware problem. I have restored the router to factory defaults and upgraded the firmware to v4.1.1.01-sp and activated again but web Protection still not working..
What can i do?
thanks
After the device is reset to factory default, the activated license stored on the device is gone and the device will try to connect to the license server for entitlement checking. What you are experiencing might be caused by a temporal outage of the license server, but please call the Support Center to get immediate assistance.
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Similar Messages
-
I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following: mount -uw / rm/var/db/.AppleSetupDone shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda MarkleYou did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password. -
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
-
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
White Screen of Death and Wipe Did Not Work
Hello -
I purchased my Blackberry 8900 a year ago and TMobile is my carrier.
I experienced a white screen of death on my Blackberry 8900 last nite while talking on it. It just dropped the call and the screen went white. I shut it off then back on, white screen appeared after reboot. I pulled the battery and left it out for 15 min, inserted it again and rebooted - still white.
I searched online and found a lot of info. My phone is recognized by the Desktop Manager software. I was able to back up all of my data and applications. I deleted all of the data on my phone through the DM as well (or thought I did - I can't tell if it worked or not). I downloaded the current version of the OS from TMobile for reinstallation.
I downloaded JL Cmder to fully wipe the phone. JL Cmder did not work on my home machine (Win 7) but I finally got it to work on my work machine (Vista) today.
I selected the wipe option (4) and JL Cmder successfully connected with the phone. The phone rebooted and I got happy, but on phone reboot I did NOT get the "507" error all of the how-to sites say I'm supposed to get. The phone rebooted with the same white screen and no error message. I've run the wipe command from JL Cmder a few times on the phone and it connects, reboots but I still get the white screen with no error message.
Is there anything else I need to do to get this 507 error? Or is my phone really dead?
I want to do what I can before I shell out more $$ for another phone.
Thanks in advance.Thank you for your replies...
jmrmb80 - Yes the device is still recognized by the Desktop Manager. I reloaded the OS on it this morning and the App Loader says it was successful - but on reboot the white screen loads and thats it.
billrobinson - I haven't dropped the phone since I bought it. I wish I had b/c then I could blame it on something. My friends drop their phones all the time, spill stuff on them etc.... and I do nothing - and my phone blows up -
HT201263 iTunes Recovery for iPhone 4s did not work
What do I do if I used iTunes to restore the device, waited an hour, and it still didn't work?
iPhone 4s
Not jailbroken
Paraphrased error message... "there was an error when restoring device, unable to restore"
Apple icon still blinking intermittently
Here's what I've done prior to subjecting to a recovery...
1) Plugged in iPhone with iTunes open, got the recovery pop-up
2) Attempted multiple times to avert the recovery by holding menu button and power button >10secs
3) When the apple icon reappeared continued holding the menu button, releasing the power button, until the itune logo and usb cable showed
4) released menu button. reapplied hard reboot, apple icon reappeared and began blinking
5) Repeated too many times
6) iTunes restore
7) Typed this email
Any help is appreciative!Yes, I believe the steps did Restore my device as new. I followed the steps given to me in How to Restore software in my device..still I believe the Unlocking did not work because I'm not able to use other SIM card
-
Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?
Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
my mac book pro 17 inch , 2008 year , display went dark after rebooting from origianl disc, and the steps in "everthing Mac" book did not work, any ideas?
The router might be bad or incompatible, but let's be optimistic.
On System Preferences, go to Network/Advanced/PPP. Only two items should be checked: Connect Automatically When Needed and Disconnect when switching user accounts. Uncheck everything else. Now, click Okay on the end of the page. The next time you're online, you shouldn't be disconnected.
If you still get disconnected like before, we might be dealing with a router issue - which can get rather complicated. -
How may I get my Ipad 2 to power on? I have tried the two button approach and it did not work.
My Ipad 2 will not power on. I have tried the two button approach but it did not work. Until last evening, the Ipad was working very well. After it entered the sleep mode, it would not come back on. What can I do?
The first thing to suspect is a completely drained battery. When this happens the iPad shuts down and will not turn on. Even if you charge the iPad it may take more than 30 minutes before it responds. Plug the iPad into the charger that came with it and plug the charger into a known good wall outlet. Do not charge the iPad by connecting it to a computer. Wait 30 minutes. Then reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart consider making an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
sup guys..i cannot open my owc mercury elite extended hard drive i tried to repair permisions but it sill did not work wat do i do
It's tough to help you without any information, such as how is it connected. Have you done some fundamentals like checking the cables, disconnecting and reconnecting, SMC resets and PRAM resets? If not start looking at cables, don't forget to switch them out. If you're not familiar with the resets instructions are below and don't forget to reboot in Safe Mode.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Why the iPad became blank black when I syn with itunes and it did not work again?
Why the ipad became blank black when I syn it with itunes of the desk top. It did not work since then.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?
When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device. -
I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore... -
Safari cannot open because the iPhone is not connected to internet. I do not believe I have changed any settings. I have turned off the phone and then on, but this did not work. Help?
For Safari to work, you need either Wi-Fi or cellular data.
Are you connected to a Wi-Fi hotspot?
If not is Settings > Mobile/Cellular > Mobile/Cellular Data: ON
Maybe you are looking for
-
Table Maintenance Generator : Editable Entry after validation fails
Hi, I have created a Z table and a table maintenance generator to maintain the data. I have to carry out certain validations when user enters data on Key and Non- key fields. This is working fine, but the issue is with the key fields. If validation f
-
Weblogic Server exception help
-
Error while calling 'BAPI_ACTIVITYCRM_CREATEMULTI'
hello friends, My senario is : I've to create two activities sequentially and after successfully creating 1st activity, i get one Activity GUID, now this GUID i am passing as reference GUID for 2nd activity... but as I am calling both sequentially, I
-
Boolean refnum in a cluster missing the point how to create it... :-(
Hello, It has been a while since I did Labview coding so there are some things I dont remember that good anymore. The question is simple I ques I want to make a button disabled when the program is running and do this in a subvi. Well that is simple f
-
How do I record something connected to the Line-in
I have something connected to the line-in on my iMac, how do I record it from garage band?