RV042 Router SMTP port change

Hello, I have an RV042 that I have configured to send alert logs to a comcast email address. Recently comcast changed their SMTP port from 25 to 465. I can't find where to change the port settings in the RV042 to send the router logs via port 465. Any help would be appreciated.
Thanks
Mark

Hi Mark, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You can change the port number using a port-forwarding or a One-to-One NAT in your device, you can also specify the syslog server, I´ll share with you some documentation about it:
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=544
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=346
I hope you find this answer useful,
**Please rate useful posts so other users can benefit from it**
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

SMTP port change from default

hi all,
can i change the default SMTP port in LMS2.6 version or above from port 25 to port xxx?

No, the SMTP port of tcp/25 is hardcoded. As a workaround, would it be possible for you to setup port mapping on the LMS server (or another host) to forward tcp/25 to another host/port?

Change smtp port from 25 to 26

Hello.
My ISP is blocking my smtp port 25, so I have been using port forward in my airport. 26-25. The DNS is set up til contact me on port 26.
Now I have a new router, and it doesn't have that feature, so I would like to have my mac server to listen on port 26 as smtp instead.
How do I change that?

You need to add a second listener to your mail server by editing the /etc/postfix/master.cf file. You must do this as root and using a command line editor is recommended. Make a backup of the file first. You do not need to stop mail services to edit the file but you will need to stop and then start mail to make the change recognized.
The line you need to add should look like this:
26 inet n - n - - smtpd
Test it internally after restarting mail services with a:
telnet localhost 26
Hope this helps

Mail SMTP-server changing the port by itself!

Hi!
My mail app keeps changing the smtp port from 25 to 547! I dont know how i can fix this..! It happens even though i havent put my macbook pro to sleep, over intervals of a couple of hours. Ive assigned mail to use a custom port 25 because for some reason it doesnt use port 25 when assigned to "Use default ports"..
Any ideas of how to fix? Couldnt find any case like it on the interwebs.. :/
-Tormod

Hi!
I have my own domain, so port 25 works for that mailaccount, none of the others..

How can I see / change the smtp ports in use by FF 12.0 on my WIN2K antique?

My webmail account works, though slowly, when I'm using NetScape 7.1. When I try to use the same program and service with FireFox 12.0, I can receive email, but sending email gets me an error message that's something like "Could not establish an SMTP commection with the server." The service tells me that my outgoing smtp port should be 465 if I'm using SSL, and 25 if I'm not using SSL. Also, if I'm asked about "authentication," it should be "the same as incoming." Where do I find these settings in FF12.0?
I'm asking this question on another computer, not the one I'm having trouble with. My problem child is an IBM Aptiva running Windows 2000 Version 5.0 (Build 2195; Service Pack 4) Copyright 1981-1999 Microsoft Corp. Physical memory available to Windows: 64,824 KB

Gingerbread_Man, you were right on the nose with the answer to the problem. After I installed Simple Mail v. 2.83.2, my webmail began to work with Firefox v. 12.0. My s-l-o-w computer is now a bit faster, as well, though I don't know how that could have had any connection with Simple Mail. Oh, Telga, TechnalXS, the developer, changed versions to 2.84 while I was installing 2.83.2, so I started over and finished up with the new one. What had me going was that every time I tried to print a copy of their web site, Firefox crashed and burned. Had to be that document, because other things print just fine. Anyway, thanks for your help. I'm going to recommend that Santa put you on his "good list!"

Changing Default SMTP port in SAP Portal/Web AS java 6.40

Hi all,
We are configuring notification service in SAP Portal 6.0 with SPS 15. The SMTP server not using 25 port which is default for SMTP. when the server is trying to send notification it is pointing to IP address and 25 port. HOw can I change the default port to custom defined port in Portal/Web AS Java.
Thanks in advance.
regards,
Kishore.

Hi,
may be that Im a little bit to late, but for the next one who has the same problem the solution could be interesting.
You can change the default smpt port on Web AS Java in the server parameters of the java virtual maschine.
Open the SAP J2EE Config-Tool. Goto cluster-data | instance_<instance-id> | server_<server-id>. In the tab General insert unter Java parameters the line
-Dmail.smtp.port=<port> where <port> ist the port number of your smtp server.
Testet with SAP NetWeaver Portals / SAP NW 04s and SUN Java-VM but should also work with SAP NW 04.
Greetings
Jens

Change the SMTP Port number in OIM

Hi All,
I have an email server that its SMTP port is 135.
My question is:
How can I change the SMTP Port from 25 to 135 in OIM? Because the notificacions are sent by Port number 25
Thanks & Regards,
Ariel

I actually don't have any other ideas on where this could be configured. I think that the port can be changed if you send emails programmatically but if you use the default OIM email system I don't know any other place where this could be configured.
Have you tried opening an SR with Oracle?
Best regards
/Martin

How to view and change SMTP port number in new account setup in "Mail" 10.6

When I try to set up and test a new email account addressing an SMTP server that seems to e using a nn-standard port number, how on earth can I even look at the port number assigned by default to a new account in Apple Mail 10.6 setup ?
I might have to trial and error different port numbers but when Mail tries to test the connection to the SMTP server after I enter its address, it just spins and hangs up. I suspect the reason is a wrong port number. How do I change that outgoing port number in Apple Mail ??
There seems to be no obvious way the program will let U do it or even let you view the port it assigns in apparent error.

there is no way to change the smtp port during the original account creation. you can usually wait Mail out if it's spinning its wheels at this point. I've had to wait about 15-20 minutes a few times. eventually Mail lets you through even if it fails to connect to the smtp server. then, once the account is created you can edit the smtp server and try a few different ports and settings. that's done in system preferences->accounts. click on teh smtp server at the bottom and select 'edit smtp server list". then in the popup click "advanced".

Is there any way to change OIM default SMTP port from 25 to 587

I can see only below parameter configured... please help me in changing SMTP port in OIM.
IT Resource info..
Name: Email Server
Type : Mail Server
Parameters:
**Authentication**
Server Name
User Login
Password
Thanks,
Pradeep
Edited by: user13074170 on May 8, 2012 5:27 AM

check the note :
Document 1417374.1 Can Email Server Be Configured For Non-Standard Port (Other That 25) ?
Thanks
Suren

Changing smtp port

Dear All,
I am currently running messaging server 6.2 and i want to change the smtp port to 75
Are there any bad impacts on this, or can i directlt change it?
Is this the only configutil parameter that i should change:
service.http.smtpport ?
Regards,
Scotty

s@mira123 wrote:
I am currently running messaging server 6.2 and i want to change the smtp port to 75Why?
Regards,
Shane.

Mailserver using non-standard smtp port

how do i set SMTP to accept connections on a non-standard port (i.e. 2525 or something)?
i'm running a mail server and my residential isp (comcast) after ten years of peaceful coexistence decided that they need to block port 25. so i am setting up a commercial store/forward mail relay service. all i need to do is set up my snow leopard server to accept incoming connections on a port other than 25. sounds easy. it is mentioned in the docs thusly:
"By default SMTP is enabled on port 25. If port 25 is blocked in your environment,
you need to change the port SMTP uses."
... but that's all i can find. specifically, it doesn't say exactly how to change the port.
any help appreciated.

following up to my own post. hoping this info may be useful for others who face the same issue who are running a server and then having email ports blocked by their ISP's.
i worked around this by signing up for a mail relay service (i use the one provided by dnydns.com). they forward incoming mail for my domain over a nonstandard port.
since i never received an answer to my question about how to make SnowLeopardServer email server accept SMTP connections on other ports, i simply used port mapping in my router (Airport Extreme) to redirect this port (i used 2525) on my WAN address to port 25 on my server - an acceptable workaround.
i also did the same port redirection for the other "standard alternative" smtp ports, 465 and 587.
since my ISP blocks port 25 in both directions, i also needed to find a work-around for outgoing mail as well. previously, my mail server simply forwarded to my ISP's smtp server (using the default port 25). here the Server Admin interface worked but with one "trick": under Mail>Settings>General, i left the box for "Relay outgoing mail through host:" checked, and in the field there i put "[smtp.myispdomain.net]:587" (that is with square brackets, and a colon, but no double-quotes - and of course, use your own smtp server's domain name). afaik this is not documented anywhere in the apple-provided docs, but i found the corresponding docs for postfix, and reverse-engineered it.
so now i can read (via IMAP) and send (via SMTP) mail from my home server, both when i am on my LAN and when i am accessing remotely, and effectively work around the bi-directional block of port 25 imposed by my ISP.
i'd still like to know if there is a method of configuring smtp to accept connections on ports other than 25. i can see how to do it by editing /etc/postfix/master.cf, but afaik that file gets overwritten by Server Admin...

Issue in Configuring Linksys RV042 router

Hi,
I am facing some issues in configuring the Linksys RV042 router with dual WAN configuration. We are having two internet connection and I want to perform the "Load balancing" between the two internet connections. I have followed the RV042 manual and configured the router.
But while using the Linksys RV042 for load balancing the "Outlook 2007" and "MSN" are frequently disconnecting in the client machines. We could not use the Linksys RV042 router because of this issue.
We are using the "Static IP" for the two internet connection and configured with manual. We are facing issue only in "Outlook" and "MSN" but I can browse the sites without any issues.
Is there any configurtaions needed? Please help us to get the solution in this issue.
If you need any more details please mail me @ [email protected]
Thanks in Advance,
R. Manikandan.

R. Manikandan,
Without knowing more about your configuration, and the reason for "Outlook" and "MSN" disconnecting. I would suggest that you look at the following documentation for setting up "Dual WAN" on the RV042.
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
It sounds like you may need to setup "Protocol Bindings" for your SMTP traffic to be directed out a specific WAN port.
If you continue to have issues, please let us know.
Darren

Sending email using IMAP through SMTP Port 587

Hi,
I have been sending Mail Merged email to people in organizations that I am active in, using IMAP embedded in StarOffice 5.2 (on Windows 98 Second Edition). This worked fine until a few weeks ago when I received an error message stating that AOL, as part of their anti-spam efforts, was no longer accepting third-party emails on default port 25. All third-party email must now use port 587. I looked in the IMAP dialog and in the Tools -> Options dialog, but did not see any place to change the SMTP port. The AOL error message information page had instructions for changing the port in other applications (Outlook, Eudora, etc.), but not for StarOffice. So, I have some questions:
1.Is it possible to change the port in StarOffice 5.2?
2.If not, how does StarOffice 8 send Mail Merged email? Does it use IMAP, and if so, can the port be changed?
3.Also, I like the integrated configuration in StarOffice 5.2, where database fields can be directly accessed in the Insert -> Fields -> Other dialog. In looking at the Mail Merge section in "SO8_What's New.pdf", it appears that Mail Merge in StarOffice 8 is restricted to predefined fields. Could I still access fields from my existing databases?
These is a lot of questions, but right now I am blocked from sending Mail Merged emails which is imparing communications with volunteers who are running educational programs. I appreciate any and all help that anyone can provide.

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

SMTP Port forward times out incoming mail

Hello-
I have an AirPort extreme with an AirPort Express WDS extension. In the Express, I've wired in my in-house mail server. I port forwarded both TCP and UDP for port 25 to the correct (static) IP address. With this configuration, mail frequently was dropped with the sending server getting a timeout error. After much struggle, I found that setting the default host as my mail server fixed everything. I enabled the firewall on the server and blocked all but the ports I'd been forwarding through the Extreme. All works well. The receiving mail server is Exchange 2003. The mail server on the Internet through which all of my mail bounces is running qmail. The bounce is what enabled me to monitor the log status as email was coming in.
My question is: why would making the server the default host have worked? I postulated that there was an additional port being used which is not now blocked by the Extreme, but since I firewalled out the same ports on the server, I don't feel that this could be the case. Furthermore, SOME email made it through but most of it did not. I saw nothing in the Extreme's SNMP log that indicated any blocking was going on.
I would MUCH rather simply port forward on the Extreme so if anyone has any idea why this would have been happening, I'd appreciate it. I should also note that before I installed my AirPort Extreme, this configuration with my old router (using port forwarding) worked flawlessly.
As a side note, I am running the Extreme in G-Only mode as some LinkSys cards on my network wouldn't behave if N was enabled.
-Kiyu
Message was edited by: QZG

Let us separate between the intermittent SMTP errors and the slowing down for the time being. What happens (and how long it takes) when you open a shell and connect to the SMTP server ? For example, try something like this:
]# telnet smtp.google.com 25 (if your smtp server is imap google)
try to send a simple message and see how long it takes, e.g.
helo smtp.google.com
--

POP and SMTP ports

Does anyone knows how to use different POP3 and SMTP ports on CCA? My mail server does not use the standard ones... I tried to use pop.host.com:port but I only got timeouts and host unreachable errors.
Thanks

There is no way to do that? I changed my email server but I really doubt customers would do the same. Also I could not find any way to use SMTP authentication, did I miss a config somewhere?

RV042 Router SMTP port change

Similar Messages

Maybe you are looking for