RV042 stops working during long transmissions

When my RV042 is accessed for long transmissions (svn check out, usually after 20 minutes ) the client receives a message "Gateway not responding, do you want to wait".
When this happens I see the following in the RV042 system log (the first 3 lines of the log below are normal):
Apr 2 17:36:53 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:36:54 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:36:54 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:37:00 2012
Connection Accepted
UDP 110.33.141.168:500->180.243.235.82:500 on MAC=
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: received Vendor ID payload [RFC 3947]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: received Vendor ID payload [RFC 3947]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [FRAGMENTATION]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [FRAGMENTATION]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: responding to Main Mode
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: Peer ID is ID_IPV4_ADDR: '192.168.1.5'
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: sent MR3, ISAKMP SA established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: esp_ealg_id=3-3,esp_ealg_keylen=0, key_len=192,esp_aalg_id=1-1.
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: esp_ealg_id=3-3,esp_ealg_keylen=0, key_len=192,esp_aalg_id=1-1.
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: responding to Quick Mode
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Inbound SPI value = 28a4a9ab
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Inbound SPI value = 28a4a9ab
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Outbound SPI value = 1cd20e4d
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Outbound SPI value = 1cd20e4d
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] >>> Responder send Quick Mode 2nd packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] >>> Responder send Quick Mode 2nd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 3rd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 3rd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel Connected
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel Connected
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: IPsec SA established {ESP=>0x1cd20e4d <0x28a4a9ab
Apr 2 17:37:02 2012
VPN Log
(qknips3) #98: received Delete SA(0x6ae048ca) payload: deleting IPSEC State #99
Apr 2 17:37:02 2012
VPN Log
(qknips3) #98: received Delete SA(0x6ae048ca) payload: deleting IPSEC State #99

I have upgraded the firmware for the RV042 to the latest.
I have hardware version 3 so the upgrade was effective.
The ping and trace route show the same results when I try from here
TraceRoute to 110.33.141.168 [d110-33-141-168.mas800.nsw.optusnet.com.au]
Hop
(ms)
(ms)
(ms)
     IP Address
Host name
1
1
0
0
     206.123.64.42
2
0
0
0
     64.124.196.225
xe-4-2-0.er2.dfw2.us.above.net
3
1
0
0
     64.125.26.213
xe-1-1-0.cr2.dfw2.us.above.net
4
5
5
5
     64.125.31.122
xe-4-2-0.cr2.iah1.us.above.net
5
39
37
37
     64.125.30.50
xe-0-3-0.cr2.lax112.us.above.net
6
45
45
46
     64.125.26.30
xe-2-1-0.cr2.sjc2.us.above.net
7
45
69
46
     64.125.31.69
xe-0-1-0.mpr2.pao1.us.above.net
8
46
46
46
     64.125.13.6
above-gige.pao.singtel.net
9
53
54
53
     203.208.149.250
10
202
202
203
     203.208.174.190
11
205
208
207
     211.29.125.242
mas2-ge3-0.gw.optusnet.com.au
12
219
215
214
     110.33.141.168
d110-33-141-168.mas800.nsw.optusnet.com.au
The avg ping to 110.33.141.168 is 427 ms
But that has nothing to do with the router of course
Thanks a lot Misty, we will try again

Similar Messages

Z30 stopped working during 10.2.1 update

My Z30 stopped working during the 10.2.1 update (Fido). The screen is completely dark, the only sign of life is the blinking red light. The pattern is 1 long blink followed by a pause and then 6 quick blinks. I have purchased tech support for 50$ without any resolution. Now on day 4 of issue.
Does anyone have any idea how to get my phone back to life????
Here is what I have tried already:
I tried reloading the OS via bb link. Keep getting a error: "error communicating with device"
I tried reinstalling my bb link and reloading the OS
I tried reloading the OS via online os update
The same things were tried by tech support and no luck there either.
I did all these things with and without sim/micro SD

Try a new USB cable. If doesn't work turn phone off plug into computer with link open and then turn on when plugged in then hit reinstall. Phone sounds like it is bricked. See if this helps.

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

HT1600 My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

My apple tv stopped working during a movie. I tried to reload software .it deleted it, but won 't reload it.

Welcome to the Apple Community Turbomedic.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Gps stop working during the run

I've purchased my SW3 mainly due to GPS stand alone.
unfortunately it stops work during the run or just about 10 minutes after has started.
I've tried My tracks , Run Keeper IFit outside and all of them happen the same .
could you fix this ?

From XDA
Quote
You need to download Google's My Tracks app and it will sync to your phone. Once you do just go down to my tracks and select run, and once it locks you'll see that location icon in the top left corner of watch showing that it has GPS lock
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

My Nokia Lumia 710 stopped working during updating...

My Nokia Lumia 710 was connected to my Pc by cable and was being updated. As the updating was going on, probably during the 7th or 8th step, it hanged and stopped responding. The updating could not complete. The worst is that the phone can no longer be powered off except when you remove the battery and after replacing the battery, it cannot boot, except to draw a diagram of phone connected to a PC. That was the stage in the updating process when it stopped working.
Please, advice me on what to do becasuse the phone is of no longer use to me. I bought it in December 2012 and it got spoilt in April 2013. I have taken to Nokia Care centre around me. but the price they said they will use to repair it is equivalent to buying a new one. Please help.

Hi Sathya87,
We're appreciate your trust that you have shown us. In this case, I suggest contacting Nokia India as they can further assist you with your concern. You can reach them by clicking on the Nokia Support at the bottom of the screen, or using this link:
www.nokia.com/support
Hope this helps.

Itunes has stopped working during optimizing

I am running iTunes 10.4.1.10 and syncing to an iPhone 4. Syncing used to work, but all of a sudden after backing up and copting apps during Optimizing 1 of 5, I get "Itunes has stopped working" then need to click which ends iTunes. Ideas?

Check this thread out -> itunes has stopped working...here are the problem reports:
Try unchecking the Include videos option in iTunes, under Photos. You'll click the iPhone on the left side of iTunes, then click Photos across the top of iTunes to see the option.
You can always import the videos into iTunes and then sync them to the iPhone using the TV Shows or Movies tab.

Photoshop CS6 stops working during random operations

Greetings,
I am asking for help again, as I have not had luck in getting this issue resolved. I have a PC with Windows 7, and am using Photoshop CS6. At random times during working in Photoshop, pop up screen just says "Adobe Photoshop CS6 has stopped working". Then offers to try find solution or to close program. There has not been a solution offered if I picked that option. The drop down has the following information:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Photoshop.exe
Application Version:                           13.0.1.34
Application Timestamp:                     5269b25c
Fault Module Name:                          Photoshop.exe
Fault Module Version:                        13.0.1.34
Fault Module Timestamp:                  5269b25c
Exception Code:                                  c0000005
Exception Offset:                                00000000013d2c43
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  f9e2
Additional Information 2:                  f9e24777b0092585ed64e9d6de9c0053
Additional Information 3:                  8f7e
Additional Information 4: 8f7ea650658a76a57517207fdab610f7
After restarting Photoshop, there is no recovery to find my document either. Any help would be appreciated.
Thanks

Look at the OS Event Viewer. See if you can find the line Faulting Module. That will be where problem is.

Satellite R830 - USB3.0 port stop working after long time usage

Hi there,
This is my new laptop. I got it just one week. However, USB 3.0 port is very weird. It always stop working when i used it for several hours. I try to update the driver, but i still seems not working.
are there any other solutions?

>well, it will stop working as well when i use it as data transfer.
So how long does it take until the USB 3.0 port stops working?
Does it interrupt the data throughput?
Did you use the USB 3.0 compatible devices?
On the Toshiba European driver page you can find the USB 3.0 driver version 2.0.34.1.
Are u using this version?

PSE 12 Organizer stops working during import

I just upgraded to PSE 12 and cannot get the Organizer to import using "From Files and Folders" option. After selecting [Import][From Files and Folders], Organizer opens Windows Explorer view and then I receive the popup that program has stopped working and Windows is searching for resolution. I can re-open Organizer without any impact that I can tell but error repeats if I try to import. I can import the pictures into Organizer from the File Save As option while in Editor.
I have tried:
1. Launching Organizer with Catalog Options trying new, rebuild and conversion(from PSE11) but none have helped.
2. Renamed Media*.db3 file and launched Organizer but same result.
Very frustrating to have new/upgraded product and it not work as expected.
I've got PSE12 loaded on a Windows 7 Home Premium PC.

Back again...during my search for psa.prf and status.dat I noticed folders and files from Version 7 and 11 still on my PC. Thinking that maybe they could be causing conflict I uninstalled PSE v12 and PE v12, removed all Adobe folders related to PSE and PE, then I edited my registry removing any entry containing reference to either program. I then re-installed PSE v 12, started out with new catalog and got same result although the error message changed from "Program stopped responding..." pop-up to Visual C++ Runtime error pop-up. I then upgraded to PSE V12.1 same results. Then went thru same process with PE v12 with no improvement.
Extremely disappointing!!!

Itunes stops working during sync

I have an ipod touch second gen (software version 4.1), and a windows pc running vista, and itunes 10.1.04. I just started having a problem. When syncing, it is taking a long time to "verify", and then when it is loading songs onto the ipod I get a message that itunes has stopped working.
Here is the problem signature:
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.54
Application Timestamp: 4cdba448
Fault Module Name: CoreAudioToolbox.dll
Fault Module Version: 7.9.4.0
Fault Module Timestamp: 4cd1b043
Exception Code: c000001d
Exception Offset: 000b2f84
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Is there a fix? Is this the result of a recent update? Help please.

I would do the standard of:
Deleting Apple software from your computer (iTunes, Quicktime, Bonjour others too?), rebooting your computer and then reinstall them.

ITunes stop working during restore

Hi guys,
I'm from Penang. there is some problem with my phone. during updating to ios 5.0.1, suddenly my phone stuck and after that, the apple logo keep on appearing. i tried to restore but somehow, during restoring my phone, iTunes stop working because windows detect some problem. already tried several times but still failed. now my phone still in recovery mode. can anybody help me?
thanks

Have you tried running the network and connectivity diagnostic? Might give you more info too. See if you are the admin user, see if it says iTunes not allowed through firewall. Also, can you see the iTunes store pages?
But yes, uninstalling your security software would be a good troubleshooting step.

"iTunes has stopped working" during every startup

Every time I try to open iTunes, it says iTunes has stopped working. When I open it, it actually works for a good two seconds before it crashes. I've tried to play one of the songs by double-clicking one of the albums and it starts to play until it crashes one second later. I've even tried to open iTunes while my iPod 4G is plugged, and it's actually showing that it's starting to sync every single time. But of course, it's going to crash within a second. This has never happened until today. I've even tried reinstalling it with the latest version. What's up with that? How do I fix iTunes?
I'm using Windows 8.1.

Try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
If not try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
Otherwise for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Microphone stop working during calls.

Hi to everyone,
i have a problem with my iPhone 4 iOS 4.1 received on 28th September from the Apple Online Store.
When i call or when i am called, in the middle of the call (after about 2-3 minutes), my microphone stop working: so i can hear others but they can't hear me.
This happens usually when my phone switch from 3G to EDGE (3G -> °). In other apps the microphone works well.
Is this a software bug? Or is my iPhone faulty?
I looked in the forum but unlucky i didn't find a real help, because none seems to know what is the nature of this issue (i know other guys have a problem like mine).
Thanks a lot,
Mattia.

The same thing is happening to me and most of the time I don't even get 2-3 minutes into the call before it happens.
I don't know if it's a coincidence, but it only started happening once I updated to the new OS 4.2

Sync problem; itune stop working during photo optimization

Hi,
Whenever I try to sync my iPad2, photo optimization window came up, and then, iTune stopped working.
Any idea why this thing is happening? Need somebody's help desperately!
Thank you in advance.
Warren

Try deleting the iTunes photo cache on your computer and then re-try (the location of it and how to delete it is described on this page http://support.apple.com/kb/TS1314 )
It might also be worth rebooting your computer and resetting the iPad before re-trying : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot

RV042 stops working during long transmissions

Similar Messages

Maybe you are looking for