RV042 v3 - Block WAN Request - bad implemented!
Hello,
I would like to ask You if You have same problem as me. I would like to allow PING on RV042 from WAN side only from specific IP address, but when I set the rule, RV042 does not respond on WAN side, because Block WAN Request is Enabled.
BUT! When I disable "Block WAN Requests", now any IP can ping my router from WAN side. Although I set access rule to Deny Ping from WAN side to anyone, it still responds.
Do you know sollution?
Good morning
Thanks for using our forum
Hi Tomas Zavodny my name is Johnnatan and I am part of the Small business Support community
I'm not sure if you disable the option “Block Wan Request” your device creates a rule in the firewall, can you check this? if your device creates the rule, follow this procedure
In this priority order, create 2 rules in your firewall device.
1. A rule that allow ping your device from your specific source(s) address(es)
2A rule that deny ping from any other source.
3 With the lowest priority, the rule that your device creates.
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered.
Please rate post you consider useful.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer.
Cisco has a very useful tool called GuideMe, is made for small business products, and your device is in this category, you can use this address for accesing the tool: http://sbkb.cisco.com/CiscoSB/Loginr.aspx?alt1 = & pid = 4 & eroute = Super, is very easy to use, just complete the 3 spaces on this way:
Select a category: (Select the device type on request), eg Routers
Enter model: (Type the model on request), eg RV042
Question: (Type what you want to know about the device), eg VPN
And it'll be showing all the information you need about what you wrote.
Similar Messages
-
How to disable the block Wan Request feature?
I can't Figure how to change it. I have been tring to do this for hours.
http://img216.imageshack.us/my.php?image=38082490tb2.jpg
Message Edited by Donald2424 on 01-01-2009 05:48 PMSimply remove the checkmark in the box then click on save. You need to use Internet Explorer for it to work
Greetings from Northern Ontario, Canada -
Page display:400 Bad HTTP request after implement WebDispatcher fo portal
Dear all
Our portal implement the WebDispatcher(7.0) to load balance for our
portal system(include one CI and one Dialog instance,we use HTTP to
load our portal request.).After that,some of the portal page display
the information like this:
400 Bad HTTP request
Bad HTTP request
Error: -21
Version: 7000
Component: HTTP_FILTER
Date/Time: Thu Sep 27 10:26:51 2007
Module: http_auth.c
Line: 469
Server: portal_WDP_02
Error Tag:
Detail: illegal request
© 2001-2005, SAP AG
We logon the CI and the page all are right.So,some wrong with our
WebDispatcher?Can you give us some advice?Hi,
The answer from SAP:
The maximum size of request URI is hard coded in kernel, and it cannot be configured by a parameter. The maximum size of PATH is 4096, and the maximum size of query string is 4096 as well.
If the request is a post request, you have to ask the calling side to move some name value pairs from query string to the POST body.
If it is a GET request, you have to ask the calling side to change it to POST and move value pairs to the POST body.
Kind Regards -
Sending Email using cl_bcs from a badi implementation
Hi,
I have written my code to send Email, inside AFTER_SAVE method of BADI Implementation of DOCUMENT_MAIN01.
Now this method of cl_bcs requires COMMIT WORK for the mail to be sent. And inside BADI implementation, we cannot write a COMMIT statement.
What is a workaround for this? While going through few other posts, I came across remote enabled FMs.
Is that the only way? Can I use some additions like STARTING NEW TASK etc. Following is the call used in case of cl_bcs:
CALL METHOD G_REF_SEND_REQUEST->SEND(
EXPORTING
I_WITH_ERROR_SCREEN = 'X'
RECEIVING
RESULT = G_SENT_TO_ALL ).
I also tried using SO_NEW_DOCUMENT_SEND_API1 STARTING NEW TASK and it works fine. But the subject length is a constraint their.
Please suggest.
Thanks in advance.Hi friend.
*& Report ZTEST_273068_EMAIL_CL_BCS
REPORT ZTEST_273068_EMAIL_CL_BCS.
CONSTANTS:
gc_subject TYPE so_obj_des VALUE 'ABAP Email with CL_BCS',
gc_raw TYPE char03 VALUE 'RAW'.
DATA:
gv_mlrec TYPE so_obj_nam,
gv_sent_to_all TYPE os_boolean,
gv_email TYPE adr6-smtp_addr,
gv_subject TYPE so_obj_des,
gv_text TYPE bcsy_text,
gr_send_request TYPE REF TO cl_bcs,
gr_bcs_exception TYPE REF TO cx_bcs,
gr_recipient TYPE REF TO if_recipient_bcs,
gr_sender TYPE REF TO cl_sapuser_bcs,
gr_document TYPE REF TO cl_document_bcs.
TRY.
"Create send request
gr_send_request = cl_bcs=>create_persistent( ).
"Email FROM...
gr_sender = cl_sapuser_bcs=>create( sy-uname ).
"Add sender to send request
CALL METHOD gr_send_request->set_sender
EXPORTING
i_sender = gr_sender.
"Email TO...
gv_email = '[email protected]'.
gr_recipient = cl_cam_address_bcs=>create_internet_address( gv_email ).
"Add recipient to send request
CALL METHOD gr_send_request->add_recipient
EXPORTING
i_recipient = gr_recipient
i_express = 'X'.
"Email BODY
APPEND 'Hello world! My first ABAP email!' TO gv_text.
gr_document = cl_document_bcs=>create_document(
i_type = gc_raw
i_text = gv_text
i_length = '12'
i_subject = gc_subject ).
"Add document to send request
CALL METHOD gr_send_request->set_document( gr_document ).
"Send email
CALL METHOD gr_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE 'Email sent!'.
ENDIF.
"Commit to send email
COMMIT WORK.
"Exception handling
CATCH cx_bcs INTO gr_bcs_exception.
WRITE:
'Error!',
'Error type:',
gr_bcs_exception->error_type.
ENDTRY.
Just Execute it.
Regards,
Thrimu -
EEWB error message BADI implementation
Hi,
I am getting the following error message when I run the wizard in EEWB to create new fields:
Task CRM_BTX_ADD_NEW_FIELDS
creating of BADI Implementation "ZCRM_RF_0701" failed
I am trying to add new fields in Activities.
This system is a copy of production client. There is no EEWB project or extension created in this system. We are using this system as a sandbox. We wanted to create some new fields here in this system by crating a new project and extension but when I run the wizard to create the new fields it is giving me the above error message at the time of Generation
Anyone has any idea how to resolve this ?
Thanks
Sub
Edited by: Kolla Subrahmanyam on Jan 9, 2012 3:51 PMResolved the issue myself. Its the problem with the workbench request i was using.
Thanks
Sub -
Need badi implementation.plz it is very uurgent
hi to all sdners,
i need to know to how implement badi with practical requirement and with screen shots.if you can send it to mail it is [email protected] it is very urgent<b>Implementing Business Add-Ins (BADI) </b>
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPBSGB_HESA_NISR
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPBSGB_HESA_NISR) and double click on the method name
for example within HRPBSGB_HESA_NISR contract is a method
8. When changes have been made activate the implementation
Also do refer,
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/ebb541c5b63031e10000000a155106/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/custom-badi-implementation-324215
We can have multiple implementations for BADI
that property of BADI makes it different from user exits
see the BADI Doc
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
regards,
srinivas
<b>*reward for useful answers*</b> -
BADI implementation is not working in background for MRRL
Hai frnds,
BADI: MRM_WT_SPLIT_UPDATE is used for deducting withholding tax in MRRL(Invoice verification). This BADI was implemented and working fine in foreground, but not working in background.
After implementing the BADI, the standard method of calculating TDS(from vendor master) is over written by BADI implementation.Now standard deduction is also not workijng in background.Plz help me to solve it.
Bala.VHI,
COR6N is the Enjoy Transaction and sap does not suggest to write the BDC on these transaction as most of these transaction uses the GUI elements foe better display and which cannot be recorded while processing the BDC in back ground.
Check for the Normal transaction and write the BDC for it.
Or
Pass X to Rcommit flag in the CTU_PARAMS option and check. -
How to change the name of a BADI Implementation?
Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AKHi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto -
BADI implementation for NOTIF_EVENT_POST not getting triggered
Hi All,
We have created an implementaion for the NOTIF_EVENT_POST. And it was working fine previously. Now it is not working for some reason. In fact issue is that the implemetation is not getting triggerd at all. I have put a BREAK-POINT statement in the code, but does not even goes into the code.
I have checked all the properties. It is active. The table V_EXT_IMP has a entry corresponding to the BADI definition and implementation.
I tried to debug the standard transaction IW52 (which uses this). The program runs till the FM call for CL_EXITHANDLER=>GET_INSTANCE. It created a instance also. But it does not get inside the call for the method of the BADI LR_BADI_INST->CHECK_DATA_AT_POST.
I am at a fix now. Can somebody answer this issue? It would be very helpful.
Regards
Barada.
Edited by: Baradakanta Swain on Aug 5, 2008 4:06 PMI did not get the issue with the BADI implementation. But as our time line was very tight, we moved the code to BTE event for Updating Notifications.
This required a little tweaking of the code and now it is working.
I am marking it ANSWERED so as to remove it from the list of unanswered questions.
Regards
Barada -
BAPI Check in BADI Implementation
Dear All,
We have made an enhancement through BADI in ME21N / ME22N transaction like validating certain entries, in that I am checking the t-codes ME21, ME21N, ME22 and ME22N. If it fails then PO wonu2019t create and populate some messages.
Now there is one custom program which creating POu2019s through calling BAPI in the program and itu2019s not validating the above as its calling through custom program.
(i.e SY-TCODE eq SE38)
Now how I should put a condition on BAPI in my BADI implementation?? If it is normal user exit, we can use runtime structure T158 and check the TCODE in that. But as I am using the BADI ME_PROCESS_PO_CUST with the method CHECK doesnu2019t have any transaction code info.
And currently I have an idea of using the GET / SET Parameters and need to set in the custom program and get that info in BADI? But I donu2019t know whether this idea good or not?? If anyone has any idea please let me know?
Thanks,
Raghu.Hi Raghu,
If sy-tcode ne 'ME21'
and sy-tcode ne 'ME21N'...
IMPORT lv_data ....
do processing...
endif.
Best regards,
Prashant -
WRT1900AC: Can it block DNS requests?
Hello,
Can the WRT1900AC block DNS request from devices in a home network to public DNS service like GoogleDNS? Can anyone tell me what steps are necessary to accomplish this?
I tried to follow instructions found on the web but I could not add static routes under Advanced Routing, I got errors either about the network submask or the Gateway (mine is 192.168.1.1 and is not accepted). i don't know what to enter in these fields and also what Interface to select (LAN/Wireless or Internet).
My firmware version is 1.1.8.164461.
I would appreciate any help.
Thank you,
Luiz
Solved!
Go to Solution.Hi,
Thanks for replying. I haven't contacted support yet to confirm you suspicion, My cable modem is a Motorola SB6141. I have done some basic research that indicates that it is not capable of NAT.
However, I was able to configure a static route in my router,using the cable modem IP asgateway. After this my ping requests to Google DNS (8.8.8.8 and 8.8.4.4) started to fail. This is probably still not what I need. I don't understand why I can't save my router's IP as gateway as indicated here: http://help.unotelly.com/support/solutions/articles/193662-setup-static-routes-on-linksys-and-cisco-... This link alerts to a bug in Linksys routers but the error message I get is not "invalid static route" as indicated.
Thanks,
Luiz -
Accessing internal table declared outside of BAdI implementation
I am working on a BAdI implementation and within the BAdI, I need to manipulate the data of an internal table that is declared in the calling routine. This internal table is not a parameter to the BAdI call. I am wondering is there a way to access the internal table that is not recognized by the BAdI implementation? If so, what's the syntax to do this?
I know in debug mode, I am able to access the content of the internal table by using (Program)Itab. But I get a syntax error when accessing the internal table using (Program)Itab syntax.
Any help is appreciated!Thanks, Max.
I tried your method, but I am getting a short dump due to type conflict. I think it's because the internal table I'd like to access is declared using the following syntax:
data: begin of itab occurs 0,
end of itab.
Therefore, when processing the assign statement, the field-symbol is being treated as a structure...
I tried to change the field-symbol type to any, but after that, I can't modify the table content using loop at type of syntax..
Do you have any other suggestions?
Thanks very much! -
More than one filter in a BAdi implementation
Hi Experts,
Is it possible to have more than one filter value for one BAdi implementation?
Or should I create separate implementation for every filter value?
I tried creating second filter in an existing BAdi implementation and it is not allowing.
Thanks and regards,
Venkat.Hi,
I agree with Sandeep.
You can create n number of filter values according to the bussiness need.
Thanks
Arbind -
Migrated BADI Implementation not triggering in ECC 6.0
Hi Experts,
Need your urgent assistance how to deal with migrated BADI implementation which is not triggering in ECC 6.0. This is for PO (ME_PROCESS_PO_CUST). In the original version (4.6) it was working fine. But when this is migrated to ECC 6.0, it's not firing. Please help to trigger this one in ECC 6.0.
Points will be awarded and thanks in advance,
LMHi LM,
Can you just paste the code in the BADI.(The method in which code is there)
Is this BADI implemented and in the Active status.
Check in SE19 if the implementation exist or not?
There may be chances that some condition is not met which can trigger this BADI. Have you read the documentation of the BADI?
Regards,
Atish -
BADI implementation in ECC 6.0
I want to put a validation when changing business partner details using tcode BP but it seems there no user exists but BADIs but the BADIs that i am getting i think can only be used after the update has taken place. i have BADI ADDRESS_UPDATE and i need to know ho i can implement it in ECC 6.0. I tried SE18 but its saying "Create" operation is possible only for enhancement spots. how best can implement it
Hi Willard,
Identify ur enhancement spot. Go to SE18, give the enhancement spot name and display.
You can see your BADI in that spot. Click on the button 'Implement Enhancement Spot (F6)'.
Give a name for your enhancement implementation, select ur badi to be implemented in that spot. Give proper name to ur badi implementation.You can now put ur code in that implementation.
Check this blog of Thomas Weiss.
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
It clearly explains how you can implement BADI of an enhancement spot in ECC 6.0
Regards,
Soumya.
Edited by: Soumya Jose on Feb 5, 2009 2:14 PM
Maybe you are looking for
-
Making a book in Photoshop Elements
I read that Photoshop uses Shutterfly to print books; I am in New Zealand, do I have access to the same service as I couldn't find anywhere in Elements to do this? Secondly, my book pages start with a title page which I presume is for the inside. I w
-
UUID problem with Device Development ????
Hi All, I am making a mobile application, targeting all platform, i.e., Android, blackberry & iOS. I have a requirement, where I am able to trace the UUID of the device, is there any way, by which I can access the uuid of the device? Thanks, Ravi.
-
Setup table Administration with Direct Delta mode
Hi guys, I have a direct delta as update mode for my 2LIS_11_VAITM extractor in R/3. I'd like to know if I have to manage the relative setup table (MC11VA0ITMSETUP) with this update mode also. For instance, If I delete an ODS content and restart a n
-
Find the routine frm the program name
Hi, Is it possible to find out which routine( in VOFM) the below program is refering to? Program : LV60AA58 Thanks Keshi
-
I hope someone can help me. We bought our son the PSR-300, thought we would start him with the basics! I've spent the last day and a half trying to get this thing going for him! It keeps telling me "Unable to connect...." Obviously I have an active i