RV042G fails to work with Public Wan IP when connected to Cisco SG300

Am using a RV042G with a Fiber Optic connection terminated on WAN1 It was working fine untill received a new IP pool . When we configure with the ip on wan 1 and connect the SG300 the WAN Status shows connected but no internet connection. The wan ip doesnt work. If i replace the RV042G with a Netgear Firewall router The connection works fine with the WAN IP.
The network connection is very simple. What is that is not letting RV042G work with SG300?

Hi Tom, Thanks for the reply.
Yes when I connect a computer directly to the RV042G it works fine but as I connect back the SG300 to one of the ports the Internet goes down.
The SG300 is not working on Layer 3.
I tried Different ports but the same result.
This RV042G was working fine with the fiber optic line, We just requested the ISP to increase the Public IP pool and they Gave us New IP's. Nothing changed Just set the WAN1 to one of the new IP and it fails to work if connected with the switch
I removed the switch and connected the RVS4000 directly to RV42G and the users of RVS4000 have no issues. Not a single thing has been changed Just the new IP On wan.
I have upgraded the router, rest and configured internet settings i.e Changed wan IP but no go.
Thanks Sachin

Similar Messages

Can apple tv work with public WI-FI?

I want to buy an apple tv but I am aware that roku cannot work with public WI-FI, which is all I have for internet. Can Apple TV work with Public Wi-Fi ? (this is not related to my computer.)

It's not all about Apple, Hulu has to agree too. They've blocked their app from airplay as well.

I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I figured it out...needed to use comment tool set, not the editing tool set.

HT1551 Atv3 doesnt want to finish installing update although ive tried several times, now the remote wont work with it either and when I press the remote the light on the box flashes several times, I unplugged everything but nothing works and I cant reset

my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

This isn't achely a question it's about iPod not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

This isn't achely a question it's about iPod not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

And it's totally impractical for any OS to provide complete backwards compatibility in perpetuity. So no, Apple cannot grant your request. As WJ said, it's the developers' reponsibility to provide updates to their applications to be compatible with newer operating system releases, whatever the platform might be.
Regards.

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Does Mackie Control work with Final Cut 7 when using USB MIDI?

I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
Any thoughts?

Does Mackie Control work with Final Cut 7 when using USB MIDI?
No one will know until FCP 7 is released.
-DH

Hello . I hope to get a solution to my problem: ( I bought a laptop Mac Pro, a user But the seller was not the Secretary Laptop after arriving I've worked for almost an hour When connected to electricity Nour appears very faint, I do not see it quickly ht

Hello
. I hope to get a solution to my problem: (
I bought a laptop Mac Pro, a user
But the seller was not the Secretary :" ( !!
Laptop after arriving I've worked for almost an hour
* When connected to electricity
Nour appears very faint, I do not see it quickly
http://www.3rabart.com/up/download.php?img=38472
When separated from the energy, light shows intermittently and then disappears fast
http://www.3rabart.com/up/download.php?img=38473
I need urgent help please.
Thank you

Please ، How Email for a company ? I want to communicate with them about my problem "(

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

TS1398 My iphone 4 doesn't work with public wifi

My iPhone 4 doesn't work with any of the apps apart from weather app when I use public wifi, such as iCloud. The sign still shows that I am connected with wifi hotspot even when the signal is the strongest.
I have tried resting my iPhone 4. But doesn't work. But other wifi such as in my home or at uni which require login work well with the device. I am not sure what seems to be the problem.

Apple doesnt like generic network names link Linksys, or Belkin - when the network is a generic name there is no way to identify your "linksys" vs my "linksys" so it has trouble connecting and remembering these networks.
You need to connect to a unique network name as described in http://support.apple.com/kb/ht4199

HP Laserjet L6 fails to work with Win8.1

http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-6L-won-t-work-with-Wind... suggests that improvement comes from getting a driver WITHOUT the 'PS class driver' part in the name. I have experienced the same failure with BOTH drivers - that neither 'test page' nor 'document' prints, but instead, a variable set of other images; moreover just inserting paper triggers printing . As for appropriate connections - my PC DOES have a printer port and the printer does NOT have a USB port, so I have left the parrallel-port cable in place. If I put back the hard drive with the WinXP system, the printer works fine, suggesting that the cable is adequate. So what other tweaks can I try to regain full functionality of a fine printer ?

Hi @Sebastian43
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet 6L is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

Expose / Spaces function(s) fail to work with mouse buttons, ongoing issue

Please see this now very old thread:
http://discussions.apple.com/thread.jspa?threadID=2131775&start=0&start=0
This is an issue as old as snow leopard itself. The problem varies in that it can effect spaces or expose. When using a non-apple mouse, one or more of these functions will fail to perform with a mouse button indefinitely as soon as a restart has taken place.
In my particular case, whatever mouse button I assign to "show desktop" fails to function entirely after a restart has taken place. This remains true even if I re-apply the setting in system preferences, such as changing it to another button, or changing it to nothing, and back. I can still use keyboard shortcuts and screen corners to activate "show desktop". I can continue to use other expose and spaces features with the properly assigned mouse keys. Only one feature, in my case "show desktop", fails to function with -any- mouse button after a restart.
To make this even more clear, this behavior has remained the same and consistent for the 14 months I've had snow leopard. It has even continued to exist after I recently removed and recreated my HFS+ partition, and re-installed OS 10.6, entirely from scratch. It did not exist whatsoever for the year and a month I had OS 10.5 leopard, before upgrading to 10.6. This behavior was +literally introduced upon installing snow leopard+. I have a razer death adder 1500 DPI mouse.
Several others share the exact same symptoms, with only the affected expose/spaces function and mouse model differing. A sibling of mine experienced the +exact same issue+ with an entirely different mac model and the exact same model of mouse.
As a relatively unimportant aside, certain "tricks" seem to fix the issue, but only temporarily (one involves moving the location of spaces and/or expose out of the utilities folder, another involves deleting "com.apple.symbolichotkeys.plist" from ~/Library/Preferences). Unfortunately, these tricks:
A. always only fix the problem temporarily, the issue returns
B. do not address whatever is causing the issue in the first place
This is really frustrating quite a few people, as the linked-to thread can attest to. Along with the obvious, this frustration is magnified because:
A. This issue +does not appear+ to involve terribly challenging technical difficulties (i.e., merely mouse button behaviors).
B. This issue did not seem to exist before OS 10.6.
C. This issue, with the previous two points above in mind, has remained unaddressed for 14-plus months - the entire duration of Mac OS 10.6 snow leopard. I myself originally figured a reasonable time for this issue to be addressed & resolved would be a matter of +a few days+, weeks at most, and at the very least, thought I'd be using these beloved features again +well over a year ago+.
To put it frankly, what the %$#&? Why hasn't this been addressed yet?
Message was edited by: -DrD-
Message was edited by: -DrD-

Anyone even care? I submitted this as feedback to apple, and haven't got a reply through that route, either.

QuickTime fails to work with videos on Apple's site

QuickTime refuses to run videos on Apple's web site. Clicking on the video link, QuickTime is opened, but the usual logo is overwritten with a big question mark & the video refuses to run. I am running QuickTime 7.5.5 on a MacBook Pro 15" 2.4 GH, OS !0.5.4, but the same thing happened with the previous version of QuickTime on the same machine & version of 10.5. Ironically, videos on all other sites run perfectly, but not Apple's.
Has anyone else run into this problem? And found a solution? I'd be grateful for your help. Thanks in advance.

Thanks for your suggestion, groovyds, but it didn't help. I can be a bit more specific now. It doesn't do it with the Mac ads (I am a Mac & I am a PC), but just with the tips & tutorial videos. The problem began on OS 10.5.4, but has continued on 10.5.5. If it is only doing it on Apple's site and only with the tips & tutorials videos, then that should suggest that something in those videos won't work with the combination of QuickTime + MacBook Pro 15", 2.4 GHZ + OS 10.5.4 & 10.5.5 (and who knows how far backwards in OS 10.5 versions or forwards in future versions for that matter). Again my thanks.

RV042G fails to work with Public Wan IP when connected to Cisco SG300

Similar Messages

Maybe you are looking for