RV042G HW V1 (Need Firmware)

Hello Community,
I have A Small Business Router VPN RV042G V01, Having problems with current firmware need to downgrade or upgrade. I can find any firmware, does someone have a file I can use, old or new would be great. Cisco only has HW version 3 to download and they don't have the firmware anywhere. Someone please help......

There were similar bug in version 4.2.2.08 - CSCuh83563, which is reported to be fixed in the latest firmware - 4.2.3.03. 
You may check the release notes - http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/release/RV0xx_RN_4-2-3-03.pdf
If you face the problem after update to the latest firmware, I would suggest to make factory reset without uploading any backup after that. And if after that it is still the same behavior, I would advise to call the support line - the root cause could be something else - http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Kremena

Similar Messages

  • Need Firmware IPOD NANO  BKS25056 MV6 AK1025 HY XY-1.8C

    I Need Firmware IPOD NANO
    AK1025
    BKS25056-MV6
    HY 1G
    XY-1.8C-KM088422
    ThankS a lot.

    These posts don't really make any sense. MP4 is one format that an iPod nano can play, but an iPod nano is not itself an MP4 (and there's no need to SHOUT).
    The bottom line is that "firmware sharing" is piracy and would be a violation of the terms of use of this forum. You can always get the current version through iTunes; most people who are looking for older versions are attempting to troubleshoot using an incorrect method. If this is what you are doing, read the posts and articles to troubleshoot your specific issue, and if you are still stuck, post a detailed and complete description of the actual problem here (preferrably using coherent English).
    Apparently, there are some situations where Windows users updated their iPod's firmware, only to find that this forced them to update iTunes, only to find that this forced them to upgrade Windows! I guess trying to downgrade might be appropriate in this one case.

  • Need firmware toshiba AT300

    HII ALL
    i have toshiba tablet AT300 cannot boot hang on logo animation plz i need firmware to flash it by SD CARD
    THANK YOU ALL

    I also need firmware for at300.

  • Optiarc DVD RW AD-7561S stopped working, we need Firmware update !

    Hello!
    My dvd RW drive (Optiarc DVD RW AD-7561S ) is not working properly when reading and writing to dvds(still working good with normal cds), i have tried lot of solutions and by the way i have been impressed by the number of people who had problems with AD-7561S that stopped working.
    I still use the same OS (Vista 32bit) and have HP notebook 6730S , i tried the upper filter trick by Microsoft but it doesn't worked so i think the problem is only with this drive, i think the only way to proceed is to update the firmware, i didn't find the appropriaté firmware in the Sony-Optiarc website, they told to me by email that the OEM firmware version must be downloaded from the pc fabricant so i searched in the hp support, there's some optiarc's firmware but not exactly the AD-7561S.
    My only hope to make this drive working is to update the firmware, my only request to HP is to give us the firmware version that will solve our problem or tell us the suitable firmware of another drive  to use from the Optiarc website that will work with (i mean to use the AD-7560S for example for my AD-7561S but we need someone who know if it's equivalent and will not damage the drive) , thank you !
    I hope you will reply to my(our) request !

    Hello!
    My dvd RW drive (Optiarc DVD RW AD-7561S ) is not working properly when reading and writing to dvds(still working good with normal cds), i have tried lot of solutions and by the way i have been impressed by the number of people who had problems with AD-7561S that stopped working.
    I still use the same OS (Vista 32bit) and have HP notebook 6730S , i tried the upper filter trick by Microsoft but it doesn't worked so i think the problem is only with this drive, i think the only way to proceed is to update the firmware, i didn't find the appropriaté firmware in the Sony-Optiarc website, they told to me by email that the OEM firmware version must be downloaded from the pc fabricant so i searched in the hp support, there's some optiarc's firmware but not exactly the AD-7561S.
    My only hope to make this drive working is to update the firmware, my only request to HP is to give us the firmware version that will solve our problem or tell us the suitable firmware of another drive  to use from the Optiarc website that will work with (i mean to use the AD-7560S for example for my AD-7561S but we need someone who know if it's equivalent and will not damage the drive) , thank you !
    I hope you will reply to my(our) request !

  • N73 with Navicore needs firmware version 2.0628.0....

    Hi folks, I have N73 with v0.0.1 firmware but have been told by Navicore that I need 0.0.3 to run their Personal Europe 2006/1 software. Problem is if you go the Nokia site there is no Firmware upgrade for the N73 handset. Anyone got any idea how to get N73 firmware version 2.0628.0.0.3 or later. Thanks in hope

    Well, I took my N73 to the Nokia repair centre and the chap checked my actual phone details against Nokia's internal website and guess what - the model of N73 I have only supports the version of firmware that is currently on it (version 2.0628.0.0.1).
    He also explianed there are many different versions of the N73 handset and many different levels of firmware for each version. He kindly re-loaded 2.0628.0.0.1 just to make sure that there were no corruptions. The bluetooth still drops out so:
    I have now sent the navicore software back to Mobilefun (who have been excellent) and am contemplating what to do with the Nokia N73 - frisby comes to mind.
    I wish Nokia would get there act together BEFORE selling phones rather than using us (mushrooms - kept in the dark and fed) to Beta test their code after - and still no comments back from Nokia on this forum.
    EDIT: removed expletiveMessage Edited by jams on 26-Sep-2006
    02:24 PM

  • 4GB upgrade now needs Firmware update - how?

    Just updated my 15' Macbook Pro unibody (bought early 2009 - so maybe late 2008 model?) 2.4Ghz.
    My MBP now seems slow? even though the RAM seems to be recognised (from Crucial) as :
    4GB 1067 MHz DDR3
    I spoke to cruical about the memory and they said that sometimes it may need a "Firmware update" after installing RAM?? - Can anyone give me steps on what or how this is done?? is it under 'software update'?
    I am still on 10.5.8, and thinking of backing up and re-installing a full 10.6.4 and moving up to Snow Leopard.
    Would this cure it, and maybe update the firmware in the same instance?
    Thanks for any help!

    pitchfork wrote:
    My MBP now seems slow? even though the RAM seems to be recognised (from Crucial) as :
    Poor computer performance is one of the symptoms of bad RAM, a great first step is to run the end-user diagnostic called the Apple Hardware Test (AHT), as detailed in your MacBook Pro manual, and also by removing the RAM and checking performance when running the laptop with the RAM supplied by Apple.
    I spoke to cruical about the memory and they said that sometimes it may need a "Firmware update" after installing RAM?? - Can anyone give me steps on what or how this is done?? is it under 'software update'?
    Firmware for the MacBook Pro is obtained via software update or by download from the Apple Support Website.
    I am still on 10.5.8, and thinking of backing up and re-installing a full 10.6.4 and moving up to Snow Leopard.
    Moving to Snow Leopard is a good move generally, but it won't solve a hardware issue such as bad RAM.
    Would this cure it, and maybe update the firmware in the same instance?
    It is always advisable to run the latest version of OS X and firmware on your Mac.

  • Seems I need firmware update but it doesn't start

    MacBook Pro 17"
    Intel Core 2 Duo 2.8 GHz
    Version Boot ROM:  MBP52.008E.B05
    Version SMC: 1.42f4
    Apple SSD TS128A 128Gb, Revision:  AGAB0202
    I always experienced short gaps in responsiveness of my laptop, problably due to SSDrive, but that never annoyed me.
    Than this gaps became more and more long, especially after laptop wakes up and now are annoying.
    So I searched for a firmware update and, according to the scheme reported at http://support.apple.com/kb/HT1237? ,
    I found my laptot can accept EFI 1.8 Firmware update. But downloaded and launched it my MacBook reports that it doesn't need that upgrade and so all other intermediate Firmware updates for MacBook Pro (EFI 1.6 and 1.7). I connected my Mac to mains, closed all application and downloaded all with Safari 5.0.5. So what was wrong?
    Incidentally in that scheme my MacBook is indicated as "early 2009", elsewhere as "mid 2009".
    Apart from firmware upgrades, what can I do to solve that gaps? Thank you,
    Antonello

    See if you can boot into safe mode by holding down the shift key immediately after pressing the start button. Keep holding the shift key till a loading progress bar appears on the lower part of the screen. It will take a lot longer than normal to start this way. If you have Lion 10.7 installed you can try holding command-R  keys to get intto recovery mode and run disk utility.
    If you want some great tips on trouble shooting go to this link to frequent poster ds store's page.
    ds store's User Tips    https://discussions.apple.com/people/ds%20store?view=documents
    This one covers your problem    https://discussions.apple.com/docs/DOC-3392

  • Severe issues with new iMac. Do I need firmware update?

    I purchased a new iMac at the end of September 2007. It still had Tiger on it and ran fine. I upgraded to Leopard at it's release and have had some problems ever since BUT THEY ARE GETTING WORSE.
    I did a complete erase and install this past weekend but problems remain. I have to do a force shutdown with the power button sometimes and then things run slowly. I use Disk Warrior and rebuild the drive and also repair permissions and things seem to run fine for awhile. THEN the problems start again.
    I know there is to be a Leopard update soon. Should I wait and see if that solves the issues? I also know there was a firmware update for the new iMac in the fall. When I did my erase and re-install this past weekend, I didn't do that update UNLESS it's already in the 10.5.1 update. Should I do it now?
    I also recently got a LaCie 250 gig firewire hard drive. Sometimes it does not mount; but I've ran Disk Warrior and repaired permission on it also and no errors are reported. (I also have a 60 gb FireLite. It did not mount once; but mostly it's the LaCie that fails to mount ... but not always. 75% of the time it mounts fine.)
    I just don't know what the problem is. I am very frustrated. I have NEVER had trouble like this with a Mac in all the years I've had one. I know one things for sure. I will NEVER again buy a new machine or operating system until they've been out at least six months
    Any knowledgeable suggestions are much appreciated. Thanks so much.

    My problems are: 1)Sometimies when I try to restart the computer, I get either a spinning beach ball or a blue screen and nothing else. OR sometimes it does re-start but keeps the other spinning circular thingie going. In either case, I have to push the power button for a few secons causing it to shut down hard. On the other hand, sometimes it behaves normally.
    Other problems include slowness, such as finder windows opening very slowly or files showing up in finder windows very slowly.
    I don't notice that this happens with any particular program. It seems sporadic. Sometimes the computer runs fine and then all of a sudden, the issues reappear.
    I have used Disk Utility, Disk Warrior, repaired permission, etc. All the programs report that the discs are fine (the internal disc, the LaCie drive and the FireLite drive.) I did a complete erase and re-install. I have not used a hardware test disc. (I suppose there is one with the original restore discs; but I am using Leopard now so I'm not sure how that works. That was Tiger.)
    I have suspected a lot of things. I stopped iDisk automatic mounting & syncing. I stopped syncing altogther. I've turned off Spaces and Time Machine. I don't let any programs load automatically except the bare minimum. I'm just very frustrated.
    I did hear there was a firmware update in early November but 10.5.1 was released after that; and I have done all the software updates so I don't know if I need to do the firmware update. (This machine is one of the new thin aluminum iMacs introduced in August. I got mine in September.)

  • Need Firmware upgrade for Mat_s_h_i_t_a UJ-850

    I Need help. My DVD writer Mat_s_h_i_t_a UJ-850 has problems in writing dual layer dvds. I cannot complete the recording, it always fails. I looked for a firmware upgrade for this recorder, but I did not find anything. Does anybody know where to find a firmware upgrade for this dvd writer?
    Thank you!
    Message Edited by actihippo on 01-22-2009 10:08 PM

    It would help if you provide the firmware version currently on your DVD writer. Anyways, here is a link for firmware version 1.01.
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • Befw11s4 ..do i need firmware upgrade?

    I have a befw11s4 , firmware version1.5.10 that has been a box for years.  I rev=cenlty came acroos someone who needed a router and i thought i would give this one to them.( they run XP home) and want to hook up and xbox.
    I wanted to configuire it for them so i hardwired it to my laptop( Vista home) got into the set-up and changed the network name/key (WPA) etc.
    I am curious if i should upgrade the firmware for this unit and which is the most stable/best version

    I recently set one of these up for some low internet usage family members also...it is running Firmware Version: 1.52.02 and seems quite stable....
    Not sure about the Vista wireless authentication. They are using a netbook running XP with WPA authentication and it works fine...
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • Sleek Photo: Need Firmware Desperate

    I have accidentally deleted the firmware for my Creative Sleek: Photo and the Creative site does not supply me with a download to replace it, nor does it come with the CDs that I got with the player!
    At the moment I have a $300 paper-weight, I desperately need the firmware for my unit - I'm not sure if it is a US or UK model, so if you have either send them to me and I will try it out...
    Please - I am lost without my music :'(
    Thanks in advance
    - Ben

    Just for those looking for firmware to bring their Sleek Photo back to life you can download the European Firmware from the following link:
    www.b-project.net/ZenSleekPhotoP4S__0_0e.zip
    A special thanks to Cat for this =D

  • Need Firmware for N73

    I Need new Firmware for N73.

    18-Dec-2006
    04:36 PM
    davss wrote:
    My handset has been replaced twice in the past month due to:
    - dropping bluetooth connection with my Nokia GPS module
    - international roaming not working 'no access' message when trying to connect to foreign networks where 3G is available (where no 3G networks then 2G worked fine)
    - everything is slow
    - the latest replacement has got pretty cool software on it such as skype, msn etc. however, when tried to use it was asked to singn up for those services (£5 min pm). Since am getting 500MB free internet they say they can't turn it on on my tarif - what a riddiculous excuse!
    - now when swich off it hangs with white screen and have to take the battery out in order to be able to switch back on.
    I was complaining about my P910i when it froze once a year and yet still recovered after clicking OK button.
    This is the worst handset I've ever had! NOKIA = RUBBISH!
    They've rushed things because of K800i release and now are paying the price - learn your lesson but not on me. This is the last time am returning my handset and if you can't fix it - bye bye!
    I take it you are with 3. Did you return the handset to 3 or to Nokia? Just asking out of interest.Message Edited by thetargetarcher on 18-Dec-2006
    06:41 PM

  • Zen Micro needs firmware update for Vista, but what now as it fail

    As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
    I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
    Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

    I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

  • Need firmware for my Toshiba 32CV515D

    i need a firmware for that tv, i cannot find it nowhere and the tnt on it is just horrible. it freeze all the time. i have the 1.1 version. can someone tell me where can i download a newer one? i don't find nothing by the tv neither on the toshiba site, and this is incredible... this tv isn't 10 years old !!!
    thanx for the help... :(

    http://www.01net.com/editorial/394995/les-dix-premiers-rates-de-la-tnt-hd/
    4. Un firmware mettre jour, mais pas tout de suite
    Il y a galement ceux qui ont dcouvert le jour J que leur tlviseur TNT HD ne captait rien, alors qu'ils se situent pile au milieu de la zone de couverture. L'image HD reste fige, alors que le son continue comme si de rien n'tait. C'est le cas notamment des tlviseurs Toshiba de la srie REGZA 515 (32CV515DG, 32XV515DG, 37CV515DG, 37XV515DG, 42CV515DG et 42XV515DG), qui devront tre mis jour pour fonctionner correctement. Une mise jour du firmware qui se fera partir du 24 novembre prochain par voie hertzienne.
    Mme topo pour les possesseurs du module PlayTV de Sony, qui se sont rendu compte que les chanes HD n'taient pas dcodes. L encore, une mise jour du firmware devrait rgler l'affaire (la version 2.52 vient d'ailleurs d'tre mise en ligne, mais elle ne rgle absolument pas le problme de la HD). Mme chose, enfin, pour les tlviseurs LCD et les plasma Panasonic, qui ncessitent une mise jour. Dcidment... Pour connatre la date d'ventuelles mises jour venir de votre tuner TNT par voie hertzienne, n'hsitez pas consulter le site de l'Association du tlchargement hertzien.

  • Time Capsule (brand new) needed Firmware update, now issues still

    I have just updated my firmware on the Time Capsule, (I did figure out why I was getting an earlier error on my Time Capsule when an error popped up that "Time Machine couldn't complete the backup to my TIme Capsule because the "backup image was already in use".  I finally saw the number or exclamation mark (I forget) and it stated it needed a firmware update (wish it would download them automatically).  After I did that though, I am backing up my iMac.
    I have to take my iMac to Apple today in Tampa and drop it off to replace the HD per the replacement program of a recall so I have to make sure the backup is complete.  I also want to make sure my iPHone is backed up and so I was told when I bought Time Capsule that it would also wirelessly sync up all my Apple wireless devices.
    I was told to use Airport Utility, but that doesn't seem to work at ALL now and I'm not sure why. As of Feb. 7th, that was updated and it seems to have caused problems for many.
    I am in v. 1.2 and just deleted it and added it back in.
    How can the Time Capsule allow my iPhone to access it through Airport Utility? Was there a setting I am missing?
    HELP with the Time Capsule backup, the iPhone (and then my daughter's iPod, my iPad and that's about it) backing up wirelessly through Airport Utility.

    Your idevices do not backup directly to the TC.. nor does the Airport Utility do anything but setup the TC.
    Time Machine is the backup for the Mac.
    The devices like iphone are backed up to itunes or cloud..
    The itunes is then backed up by TM to the TC.. so it is indirect.
    See apple doco on back of iphone for instance. http://support.apple.com/kb/ht1766
    Let me also suggest you do a disk image of the mac. You will find this is much easier to recover your working mac from.. in fact get a USB drive is even better and download superduper.. you can do free disk images from it, but they can also be done from disk utility. Make a bootable USB drive which is an image of your existing internal drive. That can be easily restored to the Mac when you get it back.

Maybe you are looking for