Rv042g need help to set up smart link backup

I had set up rv042g to Smart Link Backup mode. but sometimes wan1 link is "flashing". E.g. it has short time link downs which may last for a loooong period. And every time wan1 is up, router switches back immediately. this leads to fully unworking internet connection.
The question is: can i set up the time that router guaranteed will be switched to reserved link. for example it will be switched at least for one hour after wan1 is down?
Here is part of my log to illustrate the problem:
Jan 1 12:06:18 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 12:09:08 2010      System Log      NSD SUCCESS WAN[1]
Jan 1 12:09:08 2010      System Log      WAN connection is down
Jan 1 12:09:59 2010      System Log      NSD FAIL WAN[1]
Jan 1 12:10:00 2010      System Log      WAN connection is down
Jan 1 12:10:01 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 12:14:10 2010      System Log      NSD SUCCESS WAN[1]
Jan 1 12:14:10 2010      System Log      WAN connection is down
Jan 1 12:14:54 2010      System Log      NSD FAIL WAN[1]
Jan 1 12:14:56 2010      System Log      WAN connection is down
Jan 1 12:14:57 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 12:16:15 2010      System Log      NSD SUCCESS WAN[1]
Jan 1 12:16:16 2010      System Log      WAN connection is down
Jan 1 12:17:25 2010      System Log      WAN connection is down
Jan 1 12:17:27 2010      System Log      WAN connection is down
Jan 1 12:17:28 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 12:18:14 2010      System Log      recvfrom: Network is down
Jan 1 12:18:38 2010      System Log      WAN connection is down
Jan 1 12:18:50 2010      System Log      recvfrom: Network is down
Jan 1 12:18:52 2010      System Log      WAN connection is down
Jan 1 12:18:53 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 14:14:00 2010      System Log      WAN connection is up : 31.202.231.42/255.255.255.128 gw 31.202.231.126 on eth1
Jan 1 14:14:06 2010      System Log      WAN connection is down
Jan 1 14:14:14 2010     Kernel      last message repeated 2 times
Jan 1 14:14:15 2010      System Log      WAN connection is up : 192.168.1.6/255.255.255.0 gw 192.168.1.2 on eth2
Jan 1 14:17:09 2010      System Log      recvfrom: Network is down
Jan 1 14:18:28 2010      System Log      WAN connection is up : 31.202.231.42/255.255.255.128 gw 31.202.231.126 on eth1
Jan 1 14:18:32 2010      System Log      WAN connection is down
Jan 1 14:18:33 2010      System Log      WAN connection is down
Jan 1 14:19:01 2010      System Log      WAN connection is up : 31.202.231.42/255.255.255.128 gw 31.202.231.126 on eth1
Jan 1 14:19:08 2010      System Log      WAN connection is down
Jan 1 14:19:10 2010      System Log      WAN connection is down

Dear Roman,
Thank you for reaching Small Business Support Community.
I understand your concern and unfortunately I see no way to configure the failover the way you wish. Just in case you can contact the Small Business Support Center for further assistance;
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Please let me know if there is anything I may assist you with in the meantime.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Similar Messages

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

Need help to set up my exsisting paypal account

need help to set up my exsisting paypal account

Did you have a look at the document listed here
http://forums.adobe.com/community/formscentral/payments?view=documents
Gen

HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

RV042 and Smart Link Backup

I have a RV042 with a pair of Cellular modems. They are connected, and managed with the "Smart Link Backup". The RV042 must also maintain a VPN to the home office. It has been in the field for about a month now. My 2 issues with this are:
1> not very easy to tell which WAN is active. Going thru the logs is no answer. This info should be displayed on the System Summary, not something which needs to be searched out in the logs.
2> the device is not "failing back". It fails over just fine. but, when the Primary is back online, it never returns. I suspect this has to do with the VPN and the "[ ] Tunnel Backup". My workaround for this has been to connect during "off hours", and just reboot the device.

Pyrthian,
1> Under Dual Wan>>> Smart Link Backup, which wan is set to Primary? This wan will take care of the traffic until it fails.
2>Under Network Detection Services the default Retry count is 5 pings and the Retry timeout is 30 seconds wait for the next ping. For testing purposes change this settings to retry count of 10 pings and retry timeout of 15 seconds. This will allow for more pings in a less interval time to detect traffic.

Smart Link Backup Question

I have a RV042 small business router. I have the Dual WAN setup in Smart Link Backup mode.
WAN1 is setup for ISP 1 with a static IP Address and DNS servers specified.
WAN2 is setup for ISP 2 with a dynamic IP Addess (Obtain an IP automatically) with no DNS information entered.
If I unplug the cable for WAN1 the router switches to WAN2 fine. The problem I am having is that DNS fails on all of my computers until the cable for WAN1 is reconnected. If while the WAN1 is disconnected I do an ipconfig /release then ipconfig /renew on my computers, DNS lookups then function fine. If I then plug the cable back in for WAN1 I again have to do ipconfig /release then ipconfig /renew on my computers to again have DNS function properly.
Any ideas on how this can be fixed?

Sharon Grady wrote:Tekliu and Simon, I combined your two answers by using the OpenDNS servers in the DHCP Setup screen and then ipconfig /refresh ipconfig /renew on the computers. I then unplugged WAN1. And I was still able to resolve DNS. Thanks!!!!!
No problem, glad it helped you out
Regards Simon
http://www.linksysinfo.org

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Need HELP with setting up my email on new 4g ipod touch.

I need help setting up my email on my 4g ipod touch. I just got it today and had a 1st gen and it worked fine. I need help setting it up again.
Any help would be appreciated
Thanks in advance.
Pam

http://www.apple.com/support/ipodtouch/assistant/sendmail/

Need help with setting up VPN on a Cisco EPC3925 Modem

Hi everyone,
I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!

My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work.

Rv042g need help to set up smart link backup

Similar Messages

Maybe you are looking for