RV042G Random Resets

I am hoping someone might be able to provide some insight or post back that they are having similar issues with the RV042G.
We have about 30-35 of these units deployed at small offices supplying networking services (DHCP, VPN, etc.). All have different configurations (some no VPN, some 7-8 VPN connections, different carriers for Internet connectivity, etc.) so I am unable to find or pinpoint a common cause of my issue. The network size does not seem to be an issue either as it has happened on both small and larger workgroups.
The problem I am having is at over the past 2-3 months I have had about 7 of these units randomly reset to the defaults. At that point I need to log into the device and set it backup. While not a huge deal if the device is local, my last 3 hour drive has me thinking I need to pull these things and move to something else.
All of the devices are plugged into battery backup. All devices that have failed are running the latest v4.2.3.03 firmware.
Cisco support has not been able to suggest any recommendations at this time as the reboot erases all logs. They are asking me to setup some syslog servers (which I am willing to do) but the problem is I have no idea where (or even if) this will happen again (so which routers do I set this up on).
Any thoughts or ideas on to cause or possible fix? Any suggestions or ideas are welcome.
I appreciate your time as I know its value.
John

Hi John,
I think you can try here:
TELDAT USA
Silicon Valley Offices:
901 Campisi Way, Suite 245
Campbell, CA 95008
Tel.: +1 (408) 892-9363
Fax: +1 (408) 300-9375
[email protected]
Security Products, Warehouse & RMAs:
Nicholas Martello
8601 Emerald Valley Circle,
Chesterfield, VA 23832.
Tel.: +1 (804) 739-7487
Cell: +1 (860) 754-7390
[email protected]
www.martelloconsulting.com
Best regards,
Goetz

Similar Messages

HELP!!! iPhone randomly reset and now it won't detect SIM card?

Ok so here's what I was doing when this all happened.
I had called the Linksys support for a new router I just bought that wasn't working right. After waiting about 8 mins I was connected to a gentlmen in India, we worked on my problem for about 10mins or so and then all of sudden my phone just reset, or at least went to the apple logo and just sat there.
then after 30 seconds it started ringing (before it fully restarted) and it was the tech gentlemen call me back. So I slide the thing to answer and the screen froze with the slider on the right but not unlocked but I could see the time and my back ground, just no buttons and I could still hear him and talk to him.
After we fix my problem with the router he hung up, but my phone was still froze and then it started ringing (a friend had tried to call me before it reset while I was on the phone so I assume it was him again). I couldn't answer and it just kept ringing and ringing so I held the wake button and slide the red slider to shut it off.
Left it off for 30 seconds or so then press and held it again to turn it on. Now it says restore need, connect to itunes!
ok, so I did and after wait about 30sec to a minute after connecting it to itunes it comes up with this error:
*"iTunes cannot activate your iPhone because the SIM card is not inserted or a SIM PIN is required. Disconnect your iPhone, make sure the SIM card is inserted correctly and, if you use a SIM PIN, tap Unlock to enter it, and then reconnect your iPhone."*
What the heck?! I've had it randomly reset once before about a month and a half ago and which point I did have to restore, and it did and it worked fine after that.
The SIM card IS in there, and I have no idea what my SIM PIN would be, nor do I see the option for it they speak of! And this happened about 9:30pm, well after any Apple or AT&T stores are closed! I even turned off the phone, took the SIM card out and put it back and it still did the same thing!
What would cause this to randomly just mess-up like this? I loved this phone when I got it but now that this is the 2nd time this has happened and much worse I'm pretty ticked about it. And it's not like I hacked it or unlocked it or whatever that is even called, the only things I've put on my iphone are music, pictures, and programs I all got thru itunes!
PLEASE HELP!

Hi Guys,
I'm writing this from the UK. Got an iPhone 3G bought a few weeks ago and activated (no jailbreak or other stuff)it. It worked fine but last night it gave the same error as originally reported in this thread.
Went into the O2 store (this is the provider selling iPhones in the UK) and they told me is the SIM card. Got a new one but still the same...
There is something going on here because I've seen lots of claims with the exact same description. Its almost like there is a bug in the software that gets activated on the 3rd of January.
Will go tomorrow again and ask for a new phone.

IPod and JVC Car Stereo random resetting problem

Hey all,
I recently bought my first iPod (yay!), a 30gig 5th generation. I also had a JVC KD-PDR30 cd player installed in my car so that I could hook up the iPod to it and eliminate all the random cds cluttering up my vehicle. It works great -- most of the time... the last few days I've my iPod has been randomly resetting itself while connected to the car stereo -- it's connected through the dock port (not the headphone jack) and works 90% of the time. Even still, this is frustrating. I almost want to just connect it from the headphone jack to the aux in on the car stereo. Anyway, it only seems to do this while it is connected to the car stereo. I've never had a problem with the iPod resetting while using it outside of the car. Anyone have any suggestions? Thanks Apple community!!!
Theo

I had the JVC radio with iPod connector which worked just fine for my old iPod. When I upgraded to the iTouch I had to put in a new JVC stereo. The old version does not work with the iTouch (the same issues prev. stated). The new stereo has an USB hookup on the front. It plays the iTouch, but occas. the song or book will skip. At first I thought it was when I turned corners, but realized it was just random. A bit annoying. I looked at other stereos, but I could not get the iTouch and Sirus in the same unit, except for the JVC. If you can live without your iTouch I would wait until JVC or Apple address this issue. I could not live without either (I hate commercials!), so I made the jump to the first generation. I know better.

Random reset of ringtone volume since update to 2.0

Since updating to 2.0 my ringtone volume level, which I keep on the hightest level, will randomly reset to mid-level, causing me to miss a number of calls. Anyone else notice this and is there a solution?
Thanks

My 1st gen iphone (16GB) is up to the same antics. Pre 2.0 all was perfect. Then then update... During calls, if you adjust the volume for either the iphone earpiece, speaker phone, or bluetooth headset (I'm using the Plantronics voyager 520, which was purchased at the apple store), the ringer volume gets adjusted as well.
Just go into the sounds option under settings, make a call, and watch in awe as you adjust your call volume and ringer volume at the same time.
I've missed calls b/c the volume resets it self to a lower (random) setting. Now I must check after every call. The best part is if you push up on your volume button while at the home screen (the ringer volume pop up appears) and note that you have it on the highest setting, go ahead and check the sound option under settings. It will be at some random lower level. Oh my phone never did this on 1.4. I do hope the engineers are reading this and release a fix ASAP. The main purpose of the iPhone is to be a phone. Missing calls due to a low ringer volume is crazy.
Oh, I've already restored, don't bother, problem was not resolved. I haven't come across any other problems with the 2.0 update.

Random reset of Linksys router

Problem: Linksys router randomly resets in small business environment.
Model Number: WRK54G V2.0 (Router is part of Linksys Network Kit.)
Router Firmware: 1.00.1
Observations: Linksys router resets when Sony laptops are using the Linksys router and other routers (from neighboring small business) are on.
However,
Linksys router does not reset when Sony laptops are not using the Linksys router.
Linksys router does not reset when Sony laptops are using the Linksys router and the other routers (from neighboring small businesses) are off. This was discovered during after hours when neighboring small business were able to turned off their routers.
Solutions found on internet search: All internet search solutions found to date recommend replacing the Linksys router with another brand of wireless router. Solutions date back to March 2005.
Question 1: Does Linksys have a solution for using Sony laptops in a multi-router non-Linksys environment?
Question 2: What is happening in the Linksys router to cause it to reset?

My 1st gen iphone (16GB) is up to the same antics. Pre 2.0 all was perfect. Then then update... During calls, if you adjust the volume for either the iphone earpiece, speaker phone, or bluetooth headset (I'm using the Plantronics voyager 520, which was purchased at the apple store), the ringer volume gets adjusted as well.
Just go into the sounds option under settings, make a call, and watch in awe as you adjust your call volume and ringer volume at the same time.
I've missed calls b/c the volume resets it self to a lower (random) setting. Now I must check after every call. The best part is if you push up on your volume button while at the home screen (the ringer volume pop up appears) and note that you have it on the highest setting, go ahead and check the sound option under settings. It will be at some random lower level. Oh my phone never did this on 1.4. I do hope the engineers are reading this and release a fix ASAP. The main purpose of the iPhone is to be a phone. Missing calls due to a low ringer volume is crazy.
Oh, I've already restored, don't bother, problem was not resolved. I haven't come across any other problems with the 2.0 update.

Random resets H77MA-G43

Hello,
I build a PC two months ago with the components listed below with Windows 7 64 bit. It worked perfect for two months. Now I get random resets. No BSOD or anything, just a reset. After a reset I have to select to Start Windows Normally. I did not change any software or hardware.
MSI H77MA-G43
Intel Core i5 3350P
Corsair Vengeance LP CML8GX3M2A1600C9
Sapphire HD 4850 512MB
Crucial M4 CT064M4SSD2
Corsair Builder CX600 Bronze
Fractal Design Define Mini
I have tried the following to solve the problem.
Update the BIOS to V1.11.
Install new Windows, formatted the SSD.
Run tests with IntelBurnTest, passed it.
Checked every cable in the case, all fine.
Removed the reset cable from JFP1 on the motherboard.
Clear CMOS.
Measure temps: 30 when idle, 50 when using IntelBurnTest.
I think it is the motherboard or PSU, but I am not sure. So what should I do?
Thanks in advance.

Quote from: goodkid878 on 19-May-13, 03:56:53
Thanks for the help. It turned out to be the PSU. Solved.
Thanks for reporting! Corsair PSU's are usually extremely reliable. I hope this isn't a trend of a cheapening of their quality.

IPhone 6 Random Reset and deleting call log and texts?

Anyone else have an issue where their carrier setting were updated, and afterwards their phone randomly reset? I updated my carrier setting, (My phone prompted me to). After that, it did a reset, and when it came back, all my texts and call logs were deleted. I'm curious if it was just a glitch? Or if anyone else is having these issues.

Hi,
You have low free memory left on your device. 15mb is considered minimum, you have
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes. (if you have that option)
Use the steps in this article by JSANDERS for reclaiming memory. Contained in the article is JCLARS OPTIMIZE YOUR MEMORY GUIDE.
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
If you follow these steps and keep up with your memory your phone will operate smoothly.
Please let us know if you need help with any of the steps.
Thanks
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Can you user help me?Random Reset On S750...

Hi there!
Got 4 new sets of S750 from Creative, trying to solve the Random Reset on S750 issue!
All the sets suffered from this issue....
Creative support wants to hav my set for tests...
They think is not "normal"....
Please, can you, users who had this issue on your S750 post here your experiences with this problem?
Did you got it solved? How?
Appreciate your help as I got my S750 in February 2005 and since then, I had been on a nightmare with exchanges after exchanges with no results!
Regards
Ricardo Marinheira

christian97 wrote:
What do you mean "That's the normal use you should give to your Mac"? The one that i said "I want to do is fully charge it and use it without the charger connected, can i do that everyday? " And what do you also mean "At least once a month, I recommend you to use the computer until the battery runs out, and then charge the battery" Is that a calibrating a battery? But some other user said that I shouldnt run my battery out, I should charge it on 20%. Is that true?
If you read the second link I posted, it gives more details about this. Lithium-ion batteries last longer with shallow, not deep, discharges. This means if you use it every day, draining the battery partially (maybe to 60-80%), and charge it back up to full, that's good. But if you use it every day draining it until the battery is completely empty, that's bad and will shorten battery life. That's why I keep it plugged in when near an outlet.
Refer to Table 2 in the Battery University link I posted: "Table 2: Cycle life as a function of depth of discharge. A partial discharge reduces stress and prolongs battery life."
But let's be realistic. If you cannot reach a power outlet for most of the day, then you have only so much control over your cycling pattern; use the battery as you need to get your work done, even if that means emptying it frequently. Simply budget for a potential battery replacement sooner than other users. Apple does provide a battery replacement service for a fee.

Random reset by Mini

I found a similar question archive, but I didn't feel it was really answered. When I'm selecting between items on the menu, my Mini will just randomly reset itself (apple logo). Possibly 2 or 3 times when I go from Music to Podcast, then for whatever reason, the next time it works. Anyone else experiencing this? Sorry to say it's been dropped a few times, is it a hard drive preparing to fail? Will also occasionally lock up bad, but eventually comes out of it.
thanks for any help. Im new here. The Mini has been pretty solid for a number of years of hard use.

I found a similar question archive, but I didn't feel it was really answered. When I'm selecting between items on the menu, my Mini will just randomly reset itself (apple logo). Possibly 2 or 3 times when I go from Music to Podcast, then for whatever reason, the next time it works. Anyone else experiencing this? Sorry to say it's been dropped a few times, is it a hard drive preparing to fail? Will also occasionally lock up bad, but eventually comes out of it.
thanks for any help. Im new here. The Mini has been pretty solid for a number of years of hard use.

IPad mini randomly resets

I bought my iPad mini with retina display yesterday. It randomly resets yesterday and today. When it does reset it shows the apple log then goes to the lock screen. It doesn't happen constantly and I was wondering if it's just some lag or glitch. Please help

GFGirl wrote:
My Ipad Mini started randomly crashing/restarting. I have restored, reset, reloaded....everything. I'm running latest software 8.1.3. Apple store just tries to sell me new Ipad. There are a lot of error files that I ASSUME would be helpful in determining problem. Anyone know what files would shed light on the issue? I have panic.ips, ExcResource_(app name), log-sessions, ResetCounter, stacks+backboardd, and others.
Maybe they try to sell you a new device because the error codes indicate hardware problems. You yourself stated that you have restored, reset, reloaded, etc. There isn't much more that you can do than what you have already done. If you restored as new - without loading a backup - and took the device to Apple for evaluation and they deem it to be hardware, then I would take their word for it.
Now having said that, you really provided no details in any context as to what happened when you took the iPad to the Apple Store.

WRT160N V3 Xbox 360 trouble router randomly resetting PLEASE HELP

For Christmas 2009, I received the wrt160n v3 Linksys by Cisco router. This router worked fine until about early November of 2010, when I would turn on my xbox to play a multiplayer game, and the router would randomly reset and i would lose my connection, as well as all the computers connected to the router would lose their connection to the internet. I actually sent that one back to linksys through an rma and received a new one of the same model and version, and I am still having the same problem. The router even resets when I am not on my xbox, simply just on my laptop. It is incredibly frustrating and cannot seem to find any help on the internet. Does anyone else have this problem? Are there any solutions? Is it my router or could it be my xbox screwing everything up? Any help is welcome, thank you very much

nevermind my router just reset while playing xbox. mtu is 1365, i unchecked that box, and opened my nat type, and it still reset. im starting to get extremely dissatisfied with your products

785GTM-E45 MOBO BIOS V 8.80 RANDOMLY RESETS BOOT SEQUENCE

785GTM-E45 MOBO W/ PHENOM 9750 QUAD CORE CPU/4 GB WINTEC DDR2 PC6400 (2 x 2 GB) / WINDOWS XP SP3
PROBLEM: BIOS V 8.80 RANDOMLY RESETS BOOT SEQUENCE
I HAVE 4 HARD DRIVES (2 SATA II - 1 USB 2.0 1 USB 3.0) ALL OF WHICH HAVE MULTIPLE PARTITIONS WITH 1 ACTIVE ON EACH DRIVE
SATA II DRIVES / DEVICES:
ON SATA 1: HITACHI 1TB SATA II DRIVE
ON SATA 2: MSI DVD-CW RW
ON SATA 3: MAXTOR 320GB SATA II DRIVE
USB DRIVES:
1. SEAGATE FREE AGENT EXTERNAL USB 2.0 1TB HD
2. FANTOM EXTERNAL USB 3.0 2TB HD (VIA DIABLOTEK USB 3.0 PCI-E CARD)
EXPLANATION OF PROBLEM AND FIXES ATTEMPTED TO DATE
IN BIOS BOOT SEQUENCE I SELECT THE HITACHI HD AS 1ST DEVICE AND ALSO SET IT 2ND 3RD AND 4TH AND BOOT OTHER DEVICE DISABLED. SAVE/EXIT BIOS AND WHEN SYSTEM REBOOTS IT RANDOMLY SELECTS ANY OF THE 4 DRIVES TO BOOT FROM. WHEN I ENTER BIOS AGAIN IT SHOWS WHATEVER DRIVE IT HAD SELECTED TO BOOT FROM AS 1ST, 2ND, 3RD AND 4TH DEVICE. ENABLING OR DISABLING BOOT FROM OTHER DEVICE MAKES NO DIFFERENCE.
ORIGINALLY MY HITACHI WAS ON SATA 3 AND THE MAXTOR ON SATA 1 - I SWITCHED THESE AND NO DIFFERENCE. BIOS SWITCHES BOOT DEVICE NOT ONLY TO THE MAXTOR SATA DRIVE BUT ALSO TO THE USB DRIVES. USUALLY WHEN I REENTER BIOS AND CHANGE THE BOOT SEQUENCE BACK FROM WHATEVER HD IT SHOWS TO THE HITACHI IT WILL USUALLY THEN BOOT FROM THE HITACHI SOMETIMES THOUGH IT TAKES 2 OR 3 TRIES TO GET IT TO BOOT FROM THE DRIVE I HAVE SELECTED AS 1ST BOOT DEVICE.
I HAVE TESTED ALL DRIVES EXTENSIVELY USING ONTRACK EASY RECOVERY PROFESSIONAL SOFTWARE AND ALL DRIVES SHOW NO PROBLEM.
MSI LIVE UPDATE 5 REPORTS THAT THE BIOS IS 8.80 HOWEVER IT ALSO SHOWS MY OS AS WINDOWS 2000 WHICH IS INCORRECT. MY CURRENT OS IS WINDOWS XP SP3. MY XP INSTALLATION WAS AN UPGRADE FROM WINDOWS 2000.
PROBLEM IS NOT DEVASTATING JUST ANNOYING IF ANYONE KNOWS OF A FIX I'D LOVE TO HEAR ABOUT IT. IF THIS IS A BUG IN THIS VERSION OF THE MOBO BIOS I SURE HOPE THEY EXTERMINATE IT AND RELEASE AN UPDATED VERSION IN THE NEAR FUTURE.

Quote from: Bas on 26-August-11, 18:07:03
How do you know it's randomly booting a different drive?
What are the messages you get?
As this:
That looks like a broken drive to me, where it can't find the bootsector/mbr in time to boot from, so the BIOS moves to the next drive and tries again.
I built this box about 2 months ago or so and this is the version of BIOS that came with the MOBO. I have not flashed the bios in this board.
As for knowing that it is randomly booting from a different drive as I stated each of my 4 drives has at a minimum 1 active partition. The Hitachi has a dual boot setup in Windows and if it is booting from the Hitachi drive I will get the Window giving me a choice of booting from either the Hitachi or the Seagate. If I select the Hitachi I also have it setup for two hardware profiles so it then gives me that screen to select profile 1 or 2. If I get these screens no problem - I select the Hitachi and profile 1 and it boots without any further problem.
If it has switched lets say to the maxtor (remember I have selected the Hitachi as 1st, 2nd, 3rd and 4th for boot sequence and the boot from other device is NO) I get no multi boot option it just automatically starts Windows from the active partition on the MAXTOR (I can tell because the last time I used the Maxtor didn't shut down Windows properly so I get the option screen to boot normally or use safe mode etc). The active partition on the Maxtor is a duplicate of the Hitachi but about 2 months old - basically a backup of the Hitachi active partition but out of date and without the multi boot option.
In addition if it has switched boot drives and I hit my reset button and del to open up bios again and go to the boot sequence menu it will no longer show my hitachi as all 4 choices but sometimes it will show all 4 drives in varying order (including the hitachi but not as first device), sometimes 1 drive in all 4 (as in the seagate or the maxtor or the fantom drive in all 4 of the boot sequences) this seems to occur randomly and each time the list of boot sequence is different.
Keeping in mind that I had initially selected the Hitachi drive in all 4 of the boot sequences and selected NO to boot from other device - If the Hitachi drive was not ready or had a bad bootsector/mbr should I not get a message similar to "cannot boot from selected device so and so is missing etc?? I was under the impression that when one disabled the boot from other device as in NO then the bios should not attempt to go any further then attempting to boot from the selected device(s)????
As for the broken drive and bios moving to the next drive and trying again I could understand that 1. If I had not supposedly disabled its ability to do that 2. I could perhaps understand this going to the next drive if I had selected the Seagate USB drive as my initial drive because of it's so called sleep mode which I have now turned off as it was causing errors in windows. In addition I have run numerous and rigorous tests on the drives and they all passed with flying colors.
Yesterday after a couple of tries I booted from the Hitachi drive (it was listed as 1,2,3,and 4 in bios and the boot from other device was NO) and was using that all day and was on it when I posted my help request here. Shortly thereafter I properly shut down my computer. Now I would think that when I turned it on again this morning the BIOS would have maintained its previous settings of the Hitachi in all 4 of the boot sequences and the No on enabling it to boot from other device? However when I booted up again this morning it tried to boot from the Maxtor (I can tell because I get the option screen to boot normally or use safe mode etc) so I hit the reset button and then entered bios and boot sequence and now it showed the Seagate as 1 (it had just tried to boot from the Maxtor when I hit the reset button), the Fantom as 2, the Maxtor as 3 and the Hitachi as 4 and boot from other device still said NO - changed them once again to show the Hitachi in all 4 positions and exited bios and it did then boot from the Hitachi and here I am writing this message using Windows XP located in the active partition of my Hitachi drive.
I'm not exactly a novice as my computer experience goes all the way back to mainframe days of the IBM 360 series computers. I have built so many boxes I have lost count including numerous one using MSI mobos and I have never encountered a problem similar to this. As I said it is not devastating just annoying - the only thing I can think of to totally eliminate the possibility of it being the mbr/bootsector of the Hitachi drive is to back up the drive and rewrite those sectors even though no errors have been reported.
I could be wrong but after messing with this for sometime it really seems to be a bios bug or perhaps just my bios is defective - I was able to dl a copy of v8.8 from another post in the forums - and have not used it yet. Sent all of this info in a Tech support request and posted it here to see if there were any solutions I may have overlooked before flashing the bios with a dl copy of the same version I have installed.
As for downloading the current v of bios from the forums here it was apparently the only way I could get a copy as Liveupdate 5 shows that I have the current version installed and only gives me a message that my mobo bios is current and no download is needed or something like that and the MSI site no longer gives one the ability to download the mobo bios without using liveupdate 5 or at least I couldn't find one. Guess they got tired of people killing their boards with bad flashes.

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Kt3 ultra/ gf3 ti200 random reset with 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200, with 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

Random resets, erased call logs, and faulty bb messenger

Apologies in advance if this has been discussed, but after a quick search, I couldn't find anything.
Prior to getting a 4GB memory card, I had a problem where people would ping me on BB messenger and I'd get the smiley icon. After checking the chat log, it only shows the last message sent, rather than the new message, leaving the smiley face icon still active.
In addition to this, my curve wouldn't save my call logs and would automatically delete some text messages. I linked this problem to insufficient on-phone memory and get a new card, to which it was solved with the occasional bugs.
Lately, my phone's been randomly resetting, deleting the texts and call logs, and gave me the BB messenger issue again. It's frustrating doing the hard reset (taking battery out) as a quick fix, and rather, I'd like to figure out the source of the problem and remedy that.
Does anyone know what's going on?
On a side note, my memory card doesn't snugly fit in the slot. My latch, for some reason, doesn't close tightly and is not completely aligned with the track. I figure the battery pushes the card in tight enough to not bring up issues, and I confirm that I've never had issues accessing my music or pictures stored on the memory card.
Any help would be greatly appreciated.

Hi.
You have 64 mb of total memory on your device. You sent that you have 5mb free.
15 mb free would be considered a minimum.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a close option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom close is listed.
When done using the browser, press menu and options, select cache operations,
clear all categories and hit escape it will clean the browser cache.
Use the attached links to manage your memory efficiently.
Thanks,
Bifocals
How to qualify low memory situations on the BlackBerry smartphone
How to maximize free space and battery power on the BlackBerry smartphone
Low memory state according to the File Free field on the Status screen
http://www.blackberrycool.com/2008/07/blackberry-tips-blackberry-memory-management-video/
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

RV042G Random Resets

Similar Messages

Maybe you are looking for