RV082 does not reliably pass one-to-one static route anymore

Greetings!
I've been pulling my hair out, and hope someone can help. I have a RV082 connected to a Comcast business-class internet with 6 static IP's one-to-one routed to specific internal hosts. This configuration has been stable for several years.
A few days ago, the RV082 stopped routing most of the external static requests to their specific internal hosts. External machines only display the "Can't connect to the webpage" error. Rebooting the RV082 re-enabled correct operation for about 30 minutes, then it failed again.
I pulled out my backup RV082, flashed it with the current configuration, and swapped it in. It acted the same - external statics route correctly for about 30 minutes, then it just stops.
Anyone have any ideas as to where I can look to figure this out?
Thanks - Joe

Funny that you mention calling the Small Business Support Center - I was talking with them most of yesterday afternoon. I must say that I received *excellent* support from them! It's been 18 hours without a failure (whereas before it was failing after 30 minutes or sooner).
I will not hesitate to contact Small Business Support in the future for any other difficult problems - very professional, and took the time to understand my environment.
Thanks - Joe

Similar Messages

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

HT1409 I have done this but it does not work with one of my albums and I dont know why??

I have done this but it does not work with one of my albums and I dont know why??

That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
tt2

My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases. none of my purchases are free i paid so how do a recover them?

My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases. none of my purchases are free i paid so how do a recover them?

asuming you are talking about the app store try signing into your account using your apple id into the app store.

TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

Hi I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail. *entered security key/password does not match the one set for for router. I know th

Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
Regards

I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

JMS Adapter (for DI) does not allow passing username and password to JMS connection

Post Author: PLed76
CA Forum: Data Integration
JMS Adapter (for DI) does not allow passing username and password to JMS connection. It has those fields only for MSMQ. Our Production environment does not allow us to connect to JMS (we use Tibco EMS) anonymously, so it prevents us from use of Data Integrator. Is there any way to pass those params, or obtain the correct version of JMS Adapter, or obtain source codes of the JMS Adapter so we can correct them ourselves (we can send you the corrected sources back) ? Thanks in advance for any help. (PL)ed76 Renaissance Capital

Bump - Were having the same issue.
Has anyone found a way to connect to Tibco with a user/pwd?
Version 14.0.297.

Cache "dist-test" does not support pass-through optimization

I have noticed this message in the log of my Extend proxy JVM. It is logged at INFO level.
The cache dist-test does not support pass-through optimization for objects in internal format. If possible, consider using a different cache topology.
The Extend proxy JVM is running as a storage disabled node of the cluster.
Any ideas what is causing it?
dist-test is configured like this:
<caching-scheme-mapping>
    <cache-mapping>
      <cache-name>dist-*</cache-name>
      <scheme-name>near-entitled-scheme</scheme-name>
    </cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
    <near-scheme>
      <scheme-name>near-entitled-scheme</scheme-name>
      <front-scheme>
        <local-scheme>
          <eviction-policy>HYBRID</eviction-policy>
          <high-units>1000</high-units>
        </local-scheme>
      </front-scheme>
      <back-scheme>
        <distributed-scheme>
          <scheme-ref>dist-default</scheme-ref>
        </distributed-scheme>
      </back-scheme>
    </near-scheme>
    <distributed-scheme>
      <scheme-name>dist-default</scheme-name>
      <serializer>
        <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
      </serializer>
      <lease-granularity>member</lease-granularity>
      <backing-map-scheme>
        <local-scheme>
          <listener>
            <class-scheme>
              <class-name>{backing-map-listener-class-name com.oracle.coherence.common.backingmaplisteners.NullBackingMapListener}</class-name>
              <init-params>
                <init-param>
                  <param-type>com.tangosol.net.BackingMapManagerContext</param-type>
                  <param-value>{manager-context}</param-value>
                </init-param>
              </init-params>
            </class-scheme>
          </listener>
        </local-scheme>
      </backing-map-scheme>
      <autostart>true</autostart>
    </distributed-scheme>
</caching-schemes>I presume it is something to do with the near-scheme because I do not see the message if I map dist-* caches directly to the dist-default scheme
Cheers,
JK.

Hi Jonathan,
You are getting the warning because a near cache caches Objects. Since the the proxy service is using POF, it must deserialize the POF serialized value in order to put it in the near cache. You don't see the message when you cache directly to the dist-default scheme because that scheme is configured to use POF, which allows the proxy service to pass the POF serialized value directly through to the distributed cache service.
Thanks,
Tom

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

I´m doing a design for presale, where I will need a router what support PAT for 500 or a little more of users, it not need any more features only static routing and dhcp pool for 500 users, can you help me for know what router recommend?

What is your WAN speed currently and projected WAN speed in the next 3 years?

Does 2960-X with LAN Base supports static route?

Does 2960-X with LAN Base supports static route?

Does 2960-X with LAN Base supports static route?
Yes. You need to load the correct IOS, 12.2(55)SE (and later), and you need to change the SDM Template.
Read more HERE.

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

I'm trying to recover my security questions, but my alternate email address on the link does not match the one I have put in my Apple ID, on the link it is has an old one that no longer exists. Has anyone else been through this or knows how to help m

I've been trying to remember my security questions for ages, and I can't seem to remember them. On my Apple ID I have changed my alternate email address because the previous one was deleted, but when I go on the "Password and Security" page on my Apple ID and there is a link saying "Forgot your answers? Send reset security info email to ************@*******.com" but it is giving me my old email that does not match my current one on my Apple ID and no longer exists. I have been trying for very long to recover my security questions' answers, but Apple is not coping with me.
Has anyone been through this or knows how to help me?
Thank you.

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

I am trying to restore mu I mac to original settings bu HD Mcintosh does not appear which one do i select

i am trying to restore my i mac to original settings but unable to HD Mcintosh does not appear so which one do i select

The first one says 1TB APPLE HDD ST100
the other says \FV/R4Q

Search does not work in one of the site collections

The Search in one of the site collections in my extranet sites is not working. When I search it the does return any results, it's not finding anything. I went to search just the documents library it does not work as well. I didn't find any errors in the
log or event viewer. All other site collections the search work fine. There is no exclusion in the search rule. The site collection is set as searchable. The site has no crawlog log.
Any help?

No. I added pdf. The site collections is not being crawled it doesn't exist in any of these tables .msscrawlhistory
.msscrawlcontent
.msscrawlurl

RV082 does not reliably pass one-to-one static route anymore

Similar Messages

Maybe you are looking for