RV082 Remote Clients not Able To Access Server

I have a RV082 and several of my remote laptops cannot access my server using its domain name. It can be accessed using its internal ip address. The issue is that you can log onto the server using remote access and the ip however you cannot use any shortcuts using the domain name. You can see the server with the domin name however no access path is available. This is only on a few remote user laptops. Others work perfectly. Does anyone have any advise?

Evans,
Please be details as possible when posting next.
You say some of your remote laptops can't access server via name and some can. How are the computers than can connect to servers name different from the ones that can't?
what connection type are the remote user using to connect to your network?
They using vpn software located on RV082?
IPsec / PPTP both ?
What's the subnet's that the remote computers are remote from ?
whats the local subnet of RV082?
Is the subnet's the same on remote computer as the RV082 ?
What's the WAN type (public) (private ) ip address ?
What's the topology of your network ?
You can also give the Cisco Small Business Support Center a call @ 1-866-606-1866 and get help with your issue as well.
Thanks,
Jasbryan
Cisco Support Engineer
.:|:.:|:.

Similar Messages

WHCK - Not able to access Server from client machine

Hi,
Server is running in : \\testserver
Domain : ns.local
Client : testclient
Test Name : TDI filters and LSPs are not allowed
When the above test is run from the server side, Test fails with the following error:
Cause : Failed to Start the Task
Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
Failure : Failed to Start the Task "Copy TAEF Binaries"
Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
From WttEa.log , it displays "The network path was not found".
CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1
CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
CRunManager::UserName : DTMShareUser
CRunManager::Domain : TESTSERVER
CRunManager::Password : Server2008,WTT5326ShareUser
Build No Greater than 4000. This is a Windows Vista Machine
Single User TS Enabled
Comparing TESTSERVER testclient.ns.local 10
Logon Netonly
GetUserToken : Returns 0
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
Retrying the log location creation 10 more times
Error: 0x35, The network path was not found. WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
Line=1589
Error: 0x80070035, The network path was not found. (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) ) File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
What could be the problem ??? What steps need to be done or checked further to proceed ??
Could you please help why the client is not able to access Server ???
Thanks.
Regards,
Pradeep VR

Hi,
Reason for this failure is that the test executable is not present in the HLK controller.
It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
If you face the problem in current build also, then please log a bug to Microsoft.
Thanks,
Arpo

Client not able to access EJB deployed in Oracle8i

Hi,
After lot of pains, I was able to deploy EJB in the Oracle8i DB.
Now I am facing problems when the Client makes an request to get the reference of this deployed EJB.
This is the error I receive :
"C:\JDeveloper3.0\java1.2\jre\bin\javaw.exe" -mx50m -classpath "C:\sandeep\JDeveloper3.0\class;C:\JDeveloper3.0\lib\jdev-rt.zip;C:\JDeveloper3.0\jdbc\lib\oracle8.1.5\classes111.zip;C:\JDeveloper3.0\lib\connectionmanager.zip;C:\JDeveloper3.0\li b\javax_ejb.zip;C:\JDeveloper3.0\aurora\lib\aurora_client.jar;C:\JDeveloper3.0\aurora\lib\vbjorb.jar;C:\JDeveloper3.0\aurora\lib\vbjapp.jar;C:\JDeveloper3.0\aurora\lib\vbjtools.jar ;C:\JDeveloper3.0\aurora\lib\vbj30ssl.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteSource.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteGenerated.jar;C:\JDeveloper3.0\java1.2\ jre\lib\rt.jar;C:\JDeveloper3.0\lib\jboejb.jar" LearnEJBPack.EJBClient
Creating an initial context
Looking for the EJB published as 'test/MyEJBClass'
java.lang.NoClassDefFoundError: oracle.aurora.rdbms.ClassResolver
java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContextFactory.getObjectInstance(java.lang.Object, javax.naming.Name, javax.naming.Context, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.lang.Object, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.util.Hashtable)
javax.naming.Context javax.naming.InitialContext.getURLOrDefaultInitCtx(java.lang.String)
java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
void LearnEJBPack.EJBClient.main(java.lang.String[])
Exception in thread main
I donot understand why it is not able to find
oracle.aurora.rdbms.ClassResolver.
Do I also need to load some other classes also?
Let me know.
Thanks
Sandeep
Details : JDeveloper 3.0 Oracle 8.1.5i Windows 2000

Hi Giri,
In SQL Server Help file content are i pasted here
Using the Local Service Account
The Local Service account is a special, built-in account that is similar to an authenticated user account.
The Local Service account has the same level of access to resources and objects
as members of the Users group. This limited access helps safeguard your system
if individual services or processes are compromised. Services that run as the Local
Service account access network resources as a null session with no credentials.
Using the Network Service Account
The Network Service account is a special, built-in account that is similar to an authenticated
user account. The Network Service account has the same level of access to resources and
objects as members of the Users group. Services that run as the Network Service account
access network resources using the credentials of the computer account.
Important:
Microsoft recommends that you do not use the Network Service account for the SQL Server
or SQL Server Agent services. Local User or Domain User accounts are more appropriate
for these SQL services.
Using the Local System Account
The Local System account is a highly privileged account; use caution when assigning
Local System permissions to SQL Server service accounts.
Security Note:
To increase the security of your SQL Server installation, run SQL Server services under
a local Windows account with the lowest possible privileges.
Regards
Jambulingam.P
Edited by: Jambulingam P on Aug 12, 2009 1:58 PM

Not able to access Server Behaviours on Windows 8.1

I moved my Dreamweaver from a Windows Vista Computer to a Windows 7 Computer and the to Windows 8.1.
Windows 7 and Windows 8.1 are 64 bit
I am using ASP and MySQL
On the Windows 7 computer if I create a new ASP page, the Server Behaviour Plus Button is active, but on the Windows 8 computer the plus buttton is greyed out when I create a new page and I see the message to create a site for the file, chose a document type and set up a testing server.
If I open an existing ASP page which has a Recordset already created, then the Plus Button is active and I can add a new recordset
But if I want to add a parameter when creating a link on a form to submit, I am not able to create a parameter and am told to create a site for the file, chose a document type and set up a testing server.
I cannot find a reason why on Windows 8.1 there is a problem while on Wondows 7 there is no problem
To the best of my knowledge both computers are set up in the same way for Dreamweaver
I have tried creating a new site with new pages, but that does not solve the problem
Any suggestions would be appreciated

Hi,
Are you able to access the NAS via ip address? What is the result?
The connection can also be blocked by firewall or anti-virus installed in your system, so I suggest you temporarily disable firewall\anti-virus software, and check if issue persists.
Meanwhile, you can try the following registry settings and see the result, launch registry editor, locate to
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows/CurrentVersion/Policies/System
create a new DWORD entry with the name EnableLinkedConnections and value 1, then restart PC
Yolanda Zhu
TechNet Community Support

XE Client not able to access XE Server database

I have installed Oracle Database 10g Express Edition (Western European) OracleXE.exe on one Windows XP machine and Oracle Database 10g Express Client OracleXEClient.exe on onother. I have followed the instructions to set the Server to accept remote access by performing EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE); as SYSTEM. I can ping the machine running the XE Server (10.5.111.86) from my Client machine, yet I cannot access the remote XE Server using either http://10.5.111.86:8080/apex or from the SQL command line as connect SYSTEM/mypassword@//10.5.111.86:1521/XE. The http access ultimately yields a Page Not Found and the sql connect yields a ERROR:
ORA-12170: TNS:Connect timeout occurred.

Can you telnet to it on port 8080?
Open a command prompt and type:
telnet 10.5.111.86 8080
you should see a blinking cursor. If not turn off all firewalls on the target machine and try again.
Brett

VPN clients not able to ping Remote PCs & Servers : ASA 5520

VPN is connected successfully. But not able to ping any remote ip or fqdn from client pc. But able to ping ASA 5520 firewalls inside interface. Also some clients able to access, some clients not able to access. I new to these firewalls. I tried most of ways from internet, please any one can help asap.
Remote ip section : 192.168.1.0/24
VPN IP Pool : 192.168.5.0/24
Running Config :
ip address 192.168.1.2 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
passwd z40TgSyhcLKQc3n1 encrypted
boot system disk0:/asa722-k8.bin
ftp mode passive
clock timezone GST 4
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 213.42.20.20
domain-name default.domain.invalid
access-list outtoin extended permit tcp any host 83.111.113.114 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.113 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq smtp
access-list outtoin extended permit tcp any host 83.111.113.114 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq www
access-list outtoin extended permit tcp any host 83.111.113.115 eq https
access-list outtoin extended permit tcp any host 94.56.148.98 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.117 eq ssh
access-list fualavpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0
92.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 1
2.168.5.0 255.255.255.0
access-list inet_in extended permit icmp any any time-exceeded
access-list inet_in extended permit icmp any any unreachable
access-list inet_in extended permit icmp any any echo-reply
access-list inet_in extended permit icmp any any echo
pager lines 24
logging enable
logging asdm informational
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging recipient-address [email protected] level emergencies
logging recipient-address [email protected] level errors
mtu outside 1500
mtu inside 1500
ip local pool fualapool 192.168.5.10-192.168.5.50 mask 255.255.255.0
ip local pool VPNPool 192.168.5.51-192.168.5.150 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound outside
nat (inside) 1 192.168.1.0 255.255.255.0
static (inside,outside) 94.56.148.98 192.168.1.11 netmask 255.255.255.255
static (inside,outside) 83.111.113.114 192.168.1.111 netmask 255.255.255.255
access-group inet_in in interface outside
route outside 0.0.0.0 0.0.0.0 83.111.113.116 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have no
been met or due to some specific group policy, you do not have permission to u
e any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy fualavpn internal
group-policy fualavpn attributes
dns-server value 192.168.1.111 192.168.1.100
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value fualavpn_splitTunnelAcl
username test password I7ZgrgChfw4FV2AW encrypted privilege 0
username Mohamed password Vqmmt8cR/.Qu7LhU encrypted privilege 0
username Moghazi password GMr7xgdqmGEQ2SVR encrypted privilege 0
username Moghazi attributes
password-storage enable
username fualauaq password E6CgvoOpTKphiM2U encrypted privilege 0
username fualauaq attributes
password-storage enable
username fuala password IFtijSYb7LAOV/IW encrypted privilege 15
username Basher password Djf15nXIJXmayfjY encrypted privilege 0
username Basher attributes
password-storage enable
username fualafac password VGC/7cKXW1A6eyXS encrypted privilege 0
username fualafac attributes
password-storage enable
username fualaab password ONTH8opuP4RKgRXD encrypted privilege 0
username fualaab attributes
password-storage enable
username fualaadh2 password mNEgLxzPBeF4SyDb encrypted privilege 0
username fualaadh2 attributes
password-storage enable
username fualaain2 password LSKk6slwsVn4pxqr encrypted privilege 0
username fualaain2 attributes
password-storage enable
username fualafj2 password lE4Wu7.5s7VXwCqv encrypted privilege 0
username fualafj2 attributes
password-storage enable
username fualakf2 password 38oMUuwKyShs4Iid encrypted privilege 0
username fualakf2 attributes
password-storage enable
username fualaklb password .3AMGUZ1NWU1zzIp encrypted privilege 0
username fualaklb attributes
password-storage enable
username fualastr password RDXSdBgMaJxNLnaH encrypted privilege 0
username fualastr attributes
password-storage enable
username fualauaq2 password HnjodvZocYhDKrED encrypted privilege 0
username fualauaq2 attributes
password-storage enable
username fualastore password wWDVHfUu9pdM9jGj encrypted privilege 0
username fualastore attributes
password-storage enable
username fualadhd password GK8k1MkMlIDluqF4 encrypted privilege 0
username fualadhd attributes
password-storage enable
username fualaabi password eYL0j16kscNhhci4 encrypted privilege 0
username fualaabi attributes
password-storage enable
username fualaadh password GTs/9BVCAU0TRUQE encrypted privilege 0
username fualaadh attributes
password-storage enable
username fualajuh password b9QGJ1GHhR88reM1 encrypted privilege 0
username fualajuh attributes
password-storage enable
username fualadah password JwVlqQNIellNgxnZ encrypted privilege 0
username fualadah attributes
password-storage enable
username fualarak password UE41e9hpvcMeChqx encrypted privilege 0
username fualarak attributes
password-storage enable
username fualasnk password ZwZ7fVglexrCWFUH encrypted privilege 0
username fualasnk attributes
password-storage enable
username rais password HrvvrIw5tEuam/M8 encrypted privilege 0
username rais attributes
password-storage enable
username fualafuj password yY2jRMPqmNGS.3zb encrypted privilege 0
username fualafuj attributes
password-storage enable
username fualamaz password U1YUfQzFYrsatEzC encrypted privilege 0
username fualamaz attributes
password-storage enable
username fualashj password gN4AXk/oGBTEkelQ encrypted privilege 0
username fualashj attributes
password-storage enable
username fualabdz password tg.pB7RXJx2CWKWi encrypted privilege 0
username fualabdz attributes
password-storage enable
username fualamam password uwLjc0cV7LENI17Y encrypted privilege 0
username fualamam attributes
password-storage enable
username fualaajm password u3yLk0Pz0U1n.Q0c encrypted privilege 0
username fualaajm attributes
password-storage enable
username fualagrm password mUt3A60gLJ8N5HVr encrypted privilege 0
username fualagrm attributes
password-storage enable
username fualakfn password ceTa6jmvnzOFNSgF encrypted privilege 0
username fualakfn attributes
password-storage enable
username Fualaain password Yyhr.dlc6/J7WvF0 encrypted privilege 0
username Fualaain attributes
password-storage enable
username fualaban password RCJKLGTrh7VM2EBW encrypted privilege 0
username John password D9xGV1o/ONPM9YNW encrypted privilege 15
username John attributes
password-storage disable
username wrkshopuaq password cFKpS5e6Whp0A7TZ encrypted privilege 0
username wrkshopuaq attributes
password-storage enable
username Talha password 3VoAABwXxVonLmWi encrypted privilege 0
username Houssam password Cj/uHUqsj36xUv/R encrypted privilege 0
username Faraj password w2qYfE3DkYvS/oPq encrypted privilege 0
username Faraj attributes
password-storage enable
username gowth password HQhALLeiQXuIzptCnTv1rA== nt-encrypted privilege 15
username Hameed password 0Kr0N1VRmLuWdoDE encrypted privilege 0
username Hameed attributes
password-storage enable
username Hassan password Uy4ASuiNyEd70LCw encrypted privilege 0
username cisco password IPVBkPI1GLlHurPD encrypted privilege 15
username Karim password 5iOtm58EKMyvruZA encrypted privilege 0
username Shakir password BESX2bAvlbqbDha/ encrypted privilege 0
username Riad password iB.miiOF7qMESlCL encrypted privilege 0
username Azeem password 0zAqiCG8dmLyRQ8f encrypted privilege 15
username Azeem attributes
password-storage disable
username Osama password xu66er.7duIVaP79 encrypted privilege 0
username Osama attributes
password-storage enable
username Mahmoud password bonjr0B19aOQSpud encrypted privilege 0
username alpha password x8WO0aiHL3pVFy2E encrypted privilege 15
username Wissam password SctmeK/qKVNLh/Vv encrypted privilege 0
username Wissam attributes
password-storage enable
username Nabil password m4fMvkTgVwK/O3Ms encrypted privilege 0
aaa authentication telnet console LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 outside
http 192.168.1.4 255.255.255.255 inside
http 192.168.1.100 255.255.255.255 inside
http 192.168.1.111 255.255.255.255 inside
http 192.168.1.200 255.255.255.255 inside
http 83.111.113.117 255.255.255.255 outside
http 192.168.1.17 255.255.255.255 inside
http 192.168.1.16 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn general-attributes
address-pool fualapool
address-pool VPNPool
default-group-policy fualavpn
tunnel-group fualavpn ipsec-attributes
pre-shared-key *
tunnel-group fualavpn ppp-attributes
authentication pap
authentication ms-chap-v2
authentication eap-proxy
telnet 0.0.0.0 0.0.0.0 outside
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:38e41e83465d37f69542355df734db35
: end

Hi,
What about translating the traffic on the local ASA (Active unit) for traffic received from the VPN tunnel to the internal interface IP address? You can try something like nat (outside,inside) source dynamic obj-VpnRemoteTraffic interface destination static StandbyIP StandbyIP
Regards,

Not able to access virtual machine applications in remote server.

Hi All,
I am using Oracle Linux server 5.6 - 64 bit and installed all IAM 11gr2 stack and Oracle data base. I am not able to access the any Identity Management applications in remote servers (able to access in local virtual machine) but i can able to access Database Enterprise Manager application which is running in the same machine. If any one can help me on how to fix the issue really appreciate your help.
Thanks
Kiran Pokuri

It should work with adapter in bridged mode and firewall down. (you should however check and confirm this is the case)
A reason for why local client connections to the server s/w works, and remote ones not, can be due to IP/port binding. If the server binds its listening port on an IP (such as localhost) that is not accessible to remote clients, those clients will not be able to connect.
Have a look at what IP address(es) the listening port(s) are on: netstat -l -t -p
You should see a *:7001 entry for the relevant server process - meaning that it used INADDR_ANY when it did the port bind (binds port to all existing and future IP addresses of that platform).
If not, it means the port bind was done to a single specific IP address - and that the clients need to be able to route and connect to that specific IP in order to get a connection with the server process.

Not able to access the Sql in Client

Hi
I have installed sql 2005 and sap 2007b in client server. It was installed succesfully but i am not able to access in client machine.
While installing sql whether we have to give " Network service ?? " instead of that i have give " Local system" so i think it was not allowing to acces the server in network in client Pc.???..
Now without uninstalling the sql and sap we can change the setting to access in the netwrk client Pc??? or i have to uninstall all then again ihave to install with " network service"
Pls Guide me.
Giri

Hi Giri,
In SQL Server Help file content are i pasted here
Using the Local Service Account
The Local Service account is a special, built-in account that is similar to an authenticated user account.
The Local Service account has the same level of access to resources and objects
as members of the Users group. This limited access helps safeguard your system
if individual services or processes are compromised. Services that run as the Local
Service account access network resources as a null session with no credentials.
Using the Network Service Account
The Network Service account is a special, built-in account that is similar to an authenticated
user account. The Network Service account has the same level of access to resources and
objects as members of the Users group. Services that run as the Network Service account
access network resources using the credentials of the computer account.
Important:
Microsoft recommends that you do not use the Network Service account for the SQL Server
or SQL Server Agent services. Local User or Domain User accounts are more appropriate
for these SQL services.
Using the Local System Account
The Local System account is a highly privileged account; use caution when assigning
Local System permissions to SQL Server service accounts.
Security Note:
To increase the security of your SQL Server installation, run SQL Server services under
a local Windows account with the lowest possible privileges.
Regards
Jambulingam.P

Not able to access javaFx charts from a remote system after using ext. jars

We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlps inside our web project.
It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
project. But still it did not work.
Before using external jars inside our java fx project my jnlp looks like:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
After modifying my jnlp as per my project as
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
After adding external jars my jnlp looks like this :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
<jar href="lib/jdom.jar"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
I have modified the jnlp as per my project :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
<jar href="/PiFx/FxFiles/lib/jdom.jar"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
where PiFx is our project Name

We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
Now it is not able to get the external jar file only
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
JavaFXApplication3.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
        <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
        <argument>MainJavaFXScript=misc.MyChart</argument>
    </application-desc>
    <update check="background">
</jnlp>JavaFXApplication3_browser.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
       <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
        <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
</jnlp>Applet Code
javafx({
archive: "../FxFiles/JavaFXApplication3.jar",
draggable: true,
height:hgt,
width:wdt,
code: "misc.MyChart",
name: appletName,
id: appletName
});

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

TS3899 Not able to access gmail thru iPhone. Error message states "mail server not accessible"

Not able to access my Gmail in my iphone. Error message pops up
"...... mail server not responding ........"

Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps.

Not able to access webservice after migrating from 8.1 to 10.3,plz help

Hi All,
Prev our application was running in weblogic 8.1 and now we moved to 10.3
We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
Even the testclient is not comming up.
After spending long time in that,now i dont have any clue on this issue.
Plz help on this
Thanks ni advance,
Mouli

Sunil,
We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
folllowing is the input string we are pasing to the method notifyservice
IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
Req:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
Res:
<m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
<result xsi:nil="true"/>
</m:notifyservice>
Therre was an exception in the client side,plz check below
javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
Thanks For your time,
Mouli

APEX application not able to access

Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PM

Hi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket

Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
   at System.Web.HttpResponse.set_RedirectLocation(String value)
   at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036          Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857          Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210          Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418          Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275          Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392          Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib Khan

We have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

RV082 Remote Clients not Able To Access Server

Similar Messages

Maybe you are looking for