Rv082 Router

I have a Rv082 router that works great and I added a Cisco wireless Wap4410n to one of the ports and it works great for all my wireless connections. My problem is I cannot set up any security on the wireless connection. I see it on network majic pro but cannot access it thru my router . Do I have to install a poe switch first

Hi Marty,
The UVerse gateway does have wifi enabled, but a different SSID and password than what I use behind the RV082, so this can only be joined intentionally.
Also, I only have one subset on the RV082 LAN (the UVerse LAN has a different address range as well for its LAN).
Problem is that this seems to only happen to certain devices - I've run Microsoft's Network Monitor and checked for rogue DHCPs and nothing on the PCs anyway, but some of my network cameras and new "smart" CE devices only seem to be happy with static DHCP. I don't know if these are doing some IPv6 tunelling, or something like that that is messing them up (I do not have IPv6 enabled on my LAN). The rogue DHCP assigment was IPv4 though and matched the UVerse LAN (and this device didn't have wireless anyway), so I'm kind of at a loss.
Nick.

Similar Messages

WRT54G connected to a RV082 router

Fellows,
We have installed a RV082 VPN Server in our office and now we need to connect a WRT54G just to get Wifi access to our network. We have tried several things but we have not been able to have access to the internet using PC´s via Wireless, I mean, We have been able to get IP´s assigned from the main RV082 router to the wireless PCs via the WRT54G, however, we have not been able to access the internet from those PC´s.
I guess what we need is a complet HowTo related to the connection of one WRT54G acting just as a swith/Access Point but not as a router, which also could explain how to get internet access from the wireless PC´s.
Could somebody help us with this HowTo procedure??

We have solved the issue.
Basically the main aspects to take into account are:
1. Basic Setup/Internet Connection Type: Disable
2. Applications/DHCP Server: Disable
3. Security/Firewall Protection: Disable
4. Wireless/Wireless Mode: AP
5. Setup/Advanced Routing: Disable
6. Setup/Local IP Address: Must be within the block of IPs used for the DHCP at the main Router (RV082 in our case)
All the other parameters configured normally.
All Done .. Case solved.
Thanks for your support

Is there any way to log web traffic information of the users with RV082 router ?

Dear all,
I just bought a RV082 router. I can't find any way for logging the web traffic of the users.
Can it be done with the router ?
Thanks
Fabio

Hello,
If I am not mistaking the best you can do is to send syslog traffic to a server or locally (to a server being preferred) .
But you are going to see stuff like this:
30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2101->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2102->81.0.235.240:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2103->81.0.235.251:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2104->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2105->81.0.235.250:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2106->212.5.219.46:80 on ppp0) [0,0]
You will need an external device to make this happen, Having a proxy server such as Squid would do it for you and not just that but will optimize the newtork :)
Regards,
Jcarvaja
CCIE 42930

How can i disable remote login on a RV082 router?

how can i disable remote login on a RV082 router?

Please check the below link for configuration.
http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=dc6301cd85194d7f967710344f16f990_General_Firewall_Setting_on_RV042_VPN_Router.xml&pid=2&converted=0

RV082 "router busy" information after enabling TrendMicro Web protection

Hi,
We have recently bought TrendMicro ProtectLink licences for our RV082 router. After enabling Web Protection (URL Filtering nad Web Reputation) on it, users inside local network began to recieve strange information (web page) during web browsing.
The information says:
"The router is very busy at the moment. Please try after a few minutes." You can press then OK or Retry - pressing OK do not help, the web page shows again "The router is very busy...".
Our network consist of one server (MS Windows 2003 SBS) and less than 15 workstations (including PCs and laptops). When we disable Web Protection on RV082, everything is OK and web browsing do not generate such information.
Anybody encountered such problem? Thank you in advance for your help.
Łukasz

Good Morning,
Typically the Trend Micro Protect Link filtering will take all the request (floods) that come into it and block them.
URL Overflow Control
Temporarily block URL requests (This is the recommended setting)
Temporarily bypass Trend Micro URL Filtering for requested URLs
You can change the setting to bypass the request or look into the traffic that you are filtering.
When you look at the log or counters what are you seeing the most blocks at.
URL Overflow Control
Temporarily block URL requests (Trend Micro recommended setting): Users will not be able to access the Internet until the current queue can accommodate more requests. Temporarily bypass Trend Micro URL verification for requested URLs: URL requests will temporarily bypass URL Filtering and Web Reputation Services. This could make your network vulnerable to threats.
You might want to look to break that category down to allow some of the traffic or educate the staff on what is allowed on the Internet.
I hope this helps out

RV082 router stopping any communication on Dell Powerconnect 5424 switch

All,
I have a RV082 router that is currently in prod. I have a Dell Powerconnect 5424 switch that I'd like to use in place of the unmanaged switches I am currently using.
I have the switch configured with it's IP, subnet, gateway, etc. I can plug devices into it and communicate with no problems. However, when I attempt to plug in the router, nothign will communicate to or from the switch. The devices I plugged in will not talk to each outer, ping the switch, or the router. Also cannot ping to the switch from a device plugged into the router.
If I unplug the router, comm opens back up.
Can anyone help or offer suggestions? I've posted about this on Dell's forums too.

Hi Chris, when connecting the router to the switch does a link light indicate functionality on the router or switch? Is the dell switch a managed switch? Is the dell switch a layer 3 switch? Does the dell switch have any vlans?
Do you have a wireless adapter enabled on the computer you're testing with when you integrate the router?
-Tom
Please mark answered for helpful posts

Vlan's on RV082 Router

Hello, I'm having some troubles to configure vlan's on my RV082 Router. I have a Windows server with Active Directory, so I installed it on VLAN 1, but any other PC's out of VLAN 1 can't reach it, for example VLAN 2, 3 etc. So How must I to configure te VLAN's to get visibility from the server on all VLAN's? If I don't do this, all PC's can't login on Active Direcory Domain.
I hope someone can help me
Thanks
Regards

With this router it has the option of multiple subnets. Under the setup tab there is an option for enable multiple subnets. You can create the 10.0.0.1 subnet in this setting and the router will act as a gateway for that subnet. However the router will not give out dhcp for that subnet, so you will need to either do static ip addresses or get a dhcp server for that second subnet. Then you will need to create 2 acl's one denying all traffic from the 192.168.1.x network to the 10.0.0.x network and the other denying all traffic from the 10.0.0.x to the 192.168.1.x network. This will give you multiple subnets on the router and keep them separate from each other. Finally on the port you are plugging the second switch that has the second subnet in the rv082, you can go to port management and set a port based vlan for that port as added separation. I hope this will help you out.

Help with a new RV082 Router

Greetings all,
I hope this is the correct place to post my request for help.
I just installed a new RV082 Router and I can access the internet without any problems.
We have a security camera at 192.168.1.28 on the LAN side. This works just fine on the LAN side but cannot be accessed from remote machines trying to log into the camera remotely.
The camera can be access on port 2782 without any problems using my Linux based Smoothwall router by going to any web browser such as Firefox or IE8 by keying in: http://xxx.xxx.xxx.xx:2782 and the camera’s web interface comes up allowing a user to login by keying in their id and password.
I’ve tried for a few hours now to change firewall setting but I still can’t get this to allow anyone to login remotely.
The Smoothwall router allows me to setup a pass through in the firewall by creating the follow entry:
Protocol                                  TCP
External Source IP                ALL
Source Port                           2782
Destination IP                        192.168.1.28
Destination Port                    2782
This works without any problems.
Can anyone help be configure the RV082 in order to gain access to the camera?
Any help will be appreciated. This is now driving me crazy.
Thanks

Hi Howard,
To forward the port in the RV082, go to Setup-> Forwarding. Click the Service Management and create a new service for port 2782 (i.e. Service Name IPCam, Protocol TCP, Port Range 2782 to 2782, Add to list, Save Setting) Go back to Forwarding and select the new Service from the drop down list. Enter the IP address of the camera and check the Enable box. Add to list and Save Settings at the bottom of the page. Please let us know if this works or if you need further assistance.

RV082 Router and Gateway?

Is there a way with the RV082 to configure routable IPs as additional subnets on the LAN site and have the device route to these from WAN to LAN in gateway mode? It obivously works fine in router mode but then private IPs don't function.
I have a server that requires a full public IP for SIP trunking (on a secondary NIC). I've tried 1-1 NAT and I get unexpected behavior like loss of call control anf one way audio.
I was thinking this could be accomplished by directly editing the routing table but with the public entry configured the table looks accurate automatically but doesn't route.
For now I have an RVS4000 behind the RV082 and have the RV082 in router mode with my block of IPs. I want to simplify the setup and see noticable speed increases when the RVS4000 is out of the equation.
-trevor

Thank you all for your help. I appreciate your answers.
I want to mention something I discovered that I did not pick up from the documentation. When setting up my Vonage telephone adapter for a static IP address, I thought I had to configure the adapter as well as the RV082. It turns out that I could leave the Vonage TA in DHCP mode and still enter an IP address (on the RV082 in load balancing mode) for a given mac address. This had the effect of reserving that IP address and assigning it to the Vonage TA every time it comes on line. Then I could use that IP address to select which WAN to use and what priority or speed. Very cool... :-)
Poul
^..^

QuickVPN v1.4.2.1 (RV082) uninstall freezes in Windows 7

I installed QuickVPN v1.4.2.1 as it was in the download section on Linksys:
http://software.cisco.com/download/type.html?mdfid=282414011&flowid=785
for the RV082 router we have. It connected but the program seemed buggy as there seemed to be no way to close the program after I used it so I wanted to uninstall it and install a more recent version of QuickVPN (side question: is it possible to VPN connect to my RV082 router with a different version of QuickVPN?).
I have Windows 7 Professional 64bit SP1 with all the latest updates. When I try to uninstall the program, at about the 25% mark of the window for 'QuickVPN Client Setup is preparing the InstallShield Wizard, which will guide you through the rest of the setup process. Please wait.' it seems to stop responding as holding the mouse over that windows just displayes a ring which goes round and round. I regret installing this buggy software on my PC. Any ideas how I can remove it?

Dear Patrick,
Thank you for reaching Cisco Small Business Support Community.
The link to download the latest QuickVPN v1.4.2.1 is listed below;
http://software.cisco.com/download/release.html?mdfid=282414011&flowid=785&softwareid=282465795&release=1.4.2.1&relind=AVAILABLE&rellifecycle=&reltype=latest
Here is also a document you may be interested in called "reasons you cannot connect quickVPN";
https://supportforums.cisco.com/docs/DOC-33275
QuickVPN installation tips for Windows OS;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2922
In order to better assist you uninstalling the faulty QuickVPN client I suggest yo to either contact your computer manufacturer or the Cisco Small Business Support Center directly;
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Please let me know if there is anything else I may assist you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

RV082 UPnP not working with Back To My Mac

I have several Mac based applications that are not working with UPnP on my RV082 router. It's not listed as a compatible router on Apple's MobileMe Back To My Mac hardware compatibility list. Is there a way to manually configure port forwarding for this application?
Another application that requires UPnP that is not working is El Gato EyeTV.
UPnP is on, and some applications on some computers are clearly able to open ports via UPnP.
I have firmware version 1.3.98-tm.

You will need to contact the vendor/manufacturer of the specific non-Cisco applications (Back to My Mac & El Gato EyeTV) for those application instructions, we don't support them on here. if the RV082 is working with other devices/applications, then I'd believe that it's specific to those non-Cisco apps that you would need to troubleshoot with the specfic vendors on.
Best Regards,
Glenn

Windows 7, RV082, QuickVPN hangs

Hi Experts,
I have a tough one. I have installed QuickVPN on a few systems now for an office I administer and have had relatively few issues. I have a tough one now though. I installed QuickVPN 1.4.1.2 on a Windows 7 system. The connection with the router gets set, but hangs at this point:
2011/10/04 16:57:18 [STATUS]OS Version: Windows 7
2011/10/04 16:57:18 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/10/04 16:57:18 [STATUS]Windows Firewall Private Profile Settings: ON
2011/10/04 16:57:18 [STATUS]Windows Firewall Private Profile Settings: ON
2011/10/04 16:57:19 [STATUS]One network interface detected with IP address 192.168.0.2
2011/10/04 16:57:19 [STATUS]Connecting...
2011/10/04 16:57:19 [DEBUG]Input VPN Server Address = xx.xxx.xxx.xx
2011/10/04 16:57:19 [STATUS]Connecting to remote gateway with IP address: xx.xxx.xxx.xx
2011/10/04 16:57:19 [WARNING]Server's certificate doesn't exist on your local computer.
2011/10/04 16:57:22 [STATUS]Remote gateway was reached by https ...
2011/10/04 16:57:22 [STATUS]Provisioning...
2011/10/04 16:57:31 [STATUS]Success to connect.
2011/10/04 16:57:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/10/04 16:57:31 [STATUS]Verifying Network...
2011/10/04 16:57:37 [WARNING]Failed to ping remote VPN Router!
2011/10/04 16:57:40 [WARNING]Failed to ping remote VPN Router!
2011/10/04 16:57:43 [WARNING]Failed to ping remote VPN Router!
2011/10/04 16:57:46 [WARNING]Failed to ping remote VPN Router!
2011/10/04 16:57:49 [WARNING]Failed to ping remote VPN Router!
2011/10/04 16:57:52 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/10/04 16:57:54 [STATUS]Disconnecting...
2011/10/04 16:57:57 [STATUS]Success to disconnect.
I initially thought it was the DSL router on the client side that was the problem, but I was able to successfully vpn in using the same client version, same login/pw credentials with my laptop using the same dsl router. I have done all kinds of research on this issue, and have come up blank. So far, I have eliminated the Cisco RV082 router, the QuickVPN client, the DSL router on the client side, and the setup. Obviously the problem probably lies with the actual system. But I don't know where else to look. Any help would be appreciated.
R

Dear Friends
I wish you are fine ........ QuickVPN is very bad utility and unstable ....... I tried TheGreenBow VPN Client and it works very well ......... Here is the torrent link for software:
http://thepiratebay.sx/torrent/6673988
Also here is the link that describe the configuration between RV082 and TheGreenBow
http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=95c2d48951154227ba43e7b55b76cdc3_Configuration_of_C2G_using_Greenbow_on_RV042_and_RV082.xml&pid=2&converted=0
In this configuration, You will create Tunnel for every client .......Also since the clients have dynamic IP address, Use Remote Security Gateway Type : Dynamic IP + Email address
Kindly find the below link for a summary document prepeared by me for this configuration
http://www.4shared.com/file/UnvN1E7X/My_Configuration_summary_-__To.html
If you need any help, Don't hesitate contact me
Best Regards

RV082 HTTP Resolve Question

Greetings All,
I set up a CentOS 4.3 server under VMware 1.6. It servers up web pages and has a few other functions. It is at IP 192.168.1.90 on my LAN and I can ping this server from any machine on the LAN.
I had an extra machine so I installed the SmoothWall Firewall on it and I can server up any of the web pages I have on the CentOS server including mail etc.
When I do this I disconnect for the CISCO RV082 router and use the SmoothWall router. The my entire network seems happy with is and everything is working well.
I started having problems with the SmoothWall box and decided that rather getting another machine I would start to use the RV082 instead. Everything remains the same.
I haven’t done much work with the RV082 and I not that advanced with networking and routers. I have tried several different setting with the RV082 and other then getting a port forwarded for my IPCam I can’t get to any of my web sites on the CentOS server. Like I said, everything did work when the SmoothWall box is connected.
The WAN is connected to the input on the SmoothWall box and the output goes to a hub for LAN connection. Same for the RV082 which has the cable from the WAN connected to the RV082 WAN1 connection and the output goes to the hub. The SmoothWall box and RV082 are not hooked up to the LAN at the same time.
Below is the setting for HTTP on the SmoothWall router:
Protocol:                              TCP
External Source IP:               All
Source Port:                         80
Destination IP:                      192.168.1.90             (CentOS Box)
Destination Port:                   80
I’m trying to get to WWW.VUQUEST.COM and the web page is on the CentOS box but as the RV082 settings stand right now the outside world doesn’t see the CentOS box. When I key in the URL above it resolves to the RV082 address.
Any help would really be appreciated. Thanks

Thank you. I created composite where interface is JCA HTTP Bindung Adapter. At Adapter configuration I set
Verb : POST
Payload Type : url-encoded
Endpoint : /soa-infra/services/CDP/CDPProxyREST/ProxyInterface
At Wfetch :
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\r\n
Accept-Language: en-us,en;q=0.5\r\n
Accept-Encoding: gzip,deflate\r\n
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7\r\n
Content-Type: application/x-www-form-urlencoded\r\n
\r\n
entry_id=test&entry_type=eee&file_name=aaa&mime_type=fff&meta_data=rrrr&uploadedFile=ddddd
I got response error :
HTTP/1.1 500 Internal Server Error\r\n
X-Powered-By: Servlet/2.5 JSP/2.1\r\n
X-ORACLE-DMS-ECID: 0000ItIYiI55yWK5qVp2iY1DN_6b00147b\r\n
When I create request :
Content-type: text/xml\r\n
SOAPAction: "Request-Response"\r\n
\r\n
<soapenv: ... >
<root:root><root:entry_id>ssadsd<root:entry_id><root:.......</root:root>
I got normal response with data without error.

Unable to access folders with RV082 QuickVPN

I have an office peer-to-peer network (win 7) connected with a QNAP NAS and a RV082 router. There is no proper naming (I don't know how to implement it) so everything is access via IP.
I managed to configure my RV082 to accept VPN connection from home via QuickVPN with cert etc and managed to ping all the running devices in the office, i.e. printers, nas, etc after connected with the office network.
However, when I try to browse the NAS say run "\\192.168.1.5\", it says "The network path was not found". But I could ping the IP just fine but not the name, I'm not sure if adding it into my lmhost will help.
I'm wondering if any of these has anything to do with my VPN settings? or is it my horrible network setup that is giving me the trouble. I also noticed that if i'm not on the same workgroup, when I try to browse office workgroup from Explorer/ Entire Network it will say "workgroup not accessible. You might not have permission to use this network resource..................."
Is this more of a Windows than my VPN issue? do I need other protocols besides TCP/IP such as NWlink netbios. I only have client for microsoft network, file sharing and tcp/ip running.

Hi Yee,
Thank you for posting. Are you able to access shares on \\192.168.1.5 locally? If you can access the shares when you are onsite you should be able to access them using QuickVPN as well. You are correct that if you add the hostnames to the LMHosts file you will be able to access by name.
This sounds like an issue with the NAS itself. You can check this by trying to access a shared folder on a PC. You may need to disable any antivirus or firewall software on that PC before you can access shared folders.
Please keep us updated.

RV082 DMZ Configuration Question - Point to Point

Hello,
We have 2 offices in different countries both using the RV082 router. Currently both offices have an internet connection on WAN1 and that is working fine.
We are adding a Point to Point circuit between the two offices, and my question is on the RV082 configuration on each side.
I was going to configure WAN2 in DMZ mode on each router, then connect the point to point circuit to the WAN2 port. On the China side, the DMZ IP will have to be a private address (192.168.177.1), while the DMZ port on the San Diego side will be a public IP.
We need internal computers to be able to go to the internet normally through WAN1, but also go through WAN2 if they are trying to reach the other network. I will be adding routes on each RV082 for this.
Is there anything wrong with this configuration? Do I need to change the routers from Gateway to Router mode? Does it matter if the DMZ WAN2 port has a private IP address?
Any advice or tips are greatly appreciated!
Thank you in advance,
Eric

Thanks Tom but that thread is not exactly what I was looking for. Mainly I just want to know if the RV082 can act as a fully functioning router with the two WAN ports going to different networks. So the LAN side would hit the router, look at the routing table and know which WAN port to go out of. Using the DMZ seems like it will work, but I have never tried it so I wanted to throw it out there and see if anyone has done this before.

Rv082 Router

Similar Messages

Maybe you are looking for