RV082 Unable to see or change settings in web interface

I have just purchased an RV082. I am using a Mac with Safari and Firefox to access the web interface through http://192.168.1.1
I was able to log in to the web interface using admin/admin, but the system summary page is blank.
The category choices were visible on the left (e.g. Setup>System, Setup>Password etc... but, once again, the details area to the right is blank. No way to see what the settings are, or to change them.
I have tried Safari and Firefox, ensuring that they were up to date for all Flash and other plug-ins that might be required to view the htm documents, but no help.
I have reset the router in every conceivable manner:
1. pressing and holding reset for 5 secs, or
2. pressing and holding reset for 30 secs, or
3. pressing and holding reset for 30 secs, powering off and back on again, then releasing the reset button
4. removing all of the input cabling and power. Letting it sit for 2 minutes. Repowering.
5. same as above, followed by a reset.
6. etc..., etc... I've been at this for hours, systematically trying everything I could think of.
The system appears to be resetting because, typically, after a reset, it will accept my login but give me blank detail pages. If I try again, it no longer accepts my (unchanged) password. A reset allows the device to recognize admin/admin again, but still only blank detail pages.
I would appreciate any suggestions. I'm not trying to do anything fancy here, just access the web interface to change the system identifiers, password and upgrade the firmware.
Thanks, Louis

Hey Louis,
Try downloading an add on for firefox.  It is called IE tab 2.  This is an internet explorer emulator.  Once you have that installed you can go to the bottom right hand corner of the page and click on the IE emulator tab.  After that, try logging into the router with that page.

Similar Messages

  • I work with Blackboard and the website is being changed with my updates, but I am unable to see the changes.

    I use Blackboard, which is a platform for online teaching. I make updates/changes to the site, but I am unable to see the changes. This only happens with Firefox. How do I enable updates?

    Reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • Portal Content Translation - Unable to see the changed iView name, desc etc

    Hi Experts,
    I am using Portal Content Translation to translate the name of iViews, roles, iview description etc from English to Spanish. I have followed the method mentioned in the below mentioned link:
    http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
    I have successfully executed all the processes mentioned in the document. It includes:
    Creating Worklists and add content
    Generate translation data
    Release for translation
    Search worklist and define source and target language
    Load worklist for translation
    Translate worklist
    Make worklist as translated
    Publish translation
    I am able to publish the publish translation.
    The above document says that "Publishing a translation means that the translated text strings are written back to the objects to which they belong (for example, the translated title of a role to the role object stored in the Portal Content Directory). "
    In my case I have translated the name, description of an iView. After publishing am I supposed to see the name & description of iView in Spanish in the same iView (source iView).
    I have not created any target iView. Am I supposed to create any target iView?
    I am unable to see iView name, description in Spanish.
    Can you please let me know what is going wrong?
    Thanks
    Stuart

    Hi Stuart,
    please set the user's language in UME. You can do this in the personalization dialog (see SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f8/64e93b3a612d52e10000000a11402f/frameset.htm">Setting Portal Preferences</a>. Assign the portal role "eu_core_role" to your user if you do not see the "personalize" link in the portal masthead.
    In what language does the iview name appear if you do not select Spanish language?
    Please check if the name of the iView appears in Spanish language in PCD after you switched portal language to Spanish.
    Best regards,
    Martin

  • Unable to see any changes after the preview download

    Hi Team,
    I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
    Regards,
    Santosh

    We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here: 
    http://answers.microsoft.com/en-us/winphone/forum/wp8
    Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
    your votes for existing suggestions.

  • Change settings on web gallery?

    How can I change settings on a web gallery? I want to password protect a gallery now that has been public but can't figure out how to do it.

    Nevermind, figured it out. (Settings button on the bottom bar.)

  • Unable to see effect changes in program monitor

    Hi Guys,
    I have tried applying an effect (3 way color corrector) onto a clip. When clicking on the white balance dopper and then onto the frame in the program view, the colour of the white balance changes to that colour, but the clip itself in the program view is unchanged. I cant see the adjustment. Am I missing something simple such as a setting or is there a bug?
    Thanks for any advice.
    James

    I said colour; e.g. red.
    The white balance is for the highlights , maybe there are few highlights in your picture. Slide the upper slides of the tonal range definition to the left and see what happens. The highlights should turn blueish

  • My wireless keyboard will not connect to the Mac mini. I am unable to login to change settings. How can I bypass login?

    my Mac mini is password protected and my wireless keyboard will not connect.

    Troubleshooting wireless mouse and keyboard issues
    OS X: Bluetooth devices become unresponsive

  • I am unable to see text in boxes on web pages after selecting from a drop down menu. eg country, however typed answers are visible

    In the box below which asks the question "This happened" I selected 'every time Firefox opened" and no text appeared in the text box. After selecting a few times on different answers they started to work except for answer three which I have selected now but the box appears clear, that is, no text is visible on my screen.

    I should also note something that I did that I think may be causing the default wiki and blog theme to not appear. In Server Admin, selecting Web, then going to Settings and on the Web Services tab, I changed the Data Store path to:
    /Library/WebServer/Documents
    I did this thinking it would create the html pages in the directory that the placeholder page was indicating that I should put my web page, but I think that is wrong, now. Does anyone know the default path for the data store?

  • Change settings for Web Page

    I am trying to change the color of my internet page at the top and along sides and bottom-I just got it back from the HP service center and they put a new motherboard in it and now I am trying to change the ugly grayish blue colors to something more attractive and it won't let me.It is windows 7 home premium edition. Can someone tell me why this is happening and help me please.

    Busydizzy, welcome to the forum.
    Which browser are you using; i.e. IE, Firefox, Google Chrome?  Also, you say you are trying to change the color of your Internet page.  Which page are you using for your home page?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Unable to install any Gnome Extensions through Web Interface

    I am trying to install Gnome Extensions through the Web Interface. I have done this before a few months ago but for some reason it stopped working. I switch the extension to on, and I confirm I want to install it. Nothing happens after.
    I can enable and disable Gnome Extensions through the web interface, and the firefox extension "Gnome Shell Integration" is enabled. I have found plenty of topics on the subject but none seemed to actually provide a working solution.

    Binero wrote:
    I am trying to install Gnome Extensions through the Web Interface. I have done this before a few months ago but for some reason it stopped working. I switch the extension to on, and I confirm I want to install it. Nothing happens after.
    I can enable and disable Gnome Extensions through the web interface, and the firefox extension "Gnome Shell Integration" is enabled. I have found plenty of topics on the subject but none seemed to actually provide a working solution.
    Which extension are you trying to install?
    I have this problem recently with google chrome and the dash-to-dock extension every time either GNOME Shell updates, or the extension updates. I find if I turn the extension off, delete it, restart GNOME Shell, and then reinstall the extension then it works.

  • SAP Authorization: unable to see change logs for role assignments

    Hi ,
    please do help us in this regards .
    When trying to find the changes update to certain role . We are unable to see that changes/ hope the changes are note gettng updated.
    we recive the message " NO CHAGE DOCUMENT FOUND TO MATCH SPECIFIED CRITERIA"
    MESSAGE NO .CD887.
    Please let us know how can this be sorted.
    Best Regards,
    Rahul.

    Hi,
    As per your query you can get this info in suim and when you modify any role the you have to activate this.
    Anil

  • 5800 XpressMusic - V 50.0.005 - Unable to see all ...

    I recently updated my phone 5800 XpressMusic to latest firmware V 50.0.005 (Customer Version 50.0.005.C03.01) but I am unable to see many changes. The only changes that I notice are - kinetic scrolling, change in the way browser displays the page and music library. Are these the only changes? Is there a way to check officially, what all changes, is this new firmware supposed to bring in?

    there are many conflicting reports of whats new
    here is some of them
    1.Music player is cool... it has been completely changed with albumart mini view in all songs and album sections ... it is now like nokia n97 music player
    2. Menu has kinetic scrolling
    3. Quick office integrated
    4. Hide option in music player in place of exit
    5. Music player refreshes fast
    6. New 1 touch dialling and call settings options in dialler
    7. Camera quality is little improved
    8. There is an option to uninstall quick office from phone too
    9. Ovi sinc application added
    10. Option for history list (on off) in web browser
    11. Option to send webpage via message blutooth in webbrowser
    12. Get rihanna link in webbrowser
    13. Kinetic scrolling in webbrowser
    14. Browser 7.2
    15. Lifecasting (with Maps 3.0T SR3.0)
    16. Flash Video Phase-3-Flashlite 3.1.7.x
    17. Gimlet Touch 2.2
    18. Enable Side lock Key functionality during Swipe UI (Calendar/Clock)
    19. Windows 7 Device Stage Support
    20. OVI store 1.5.6
    21. Cherry v2.1
    22. OVI contacts 1.50.8
    23. Workaround for Niagara (SMD) display module for DFS52.50 based products
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • /TMWFLOW/CMSCONF - Unable to see overview of systems

    Hi
    I am unable to see an overview of systems at /TMWFLOW/CMSCONF.
    I have configured the system landscape at SMSY. I have 3 clients in the landscape which I use as DEV, QA and PRD.
    At SOLAR_PROJET_ADMIN, I have added these components to teh landscape.
    However I am unable to see any "Change Request Management" relevant tabs in the "System landscape" tab here (as some posts in this forum suggest).
    Are these two issue related?
    Regards
    SN

    Hi
    Yes I have created the project as "Internal Maintenance Project".
    The problems that I see are:
    1. I do not see any "Project Cycle" tab in System Landscape tab at SOLAR_PROJECT_ADMIN.
    2. At SOLAR_PROJECT_ADMIN-> System Landscape-> Systems: When I check the System Landscape, It says: Logical component ZECCis not used in Project ZPRJ. (However it shows a green light.) At SMSY however I see the project ZPRJ and the logical component assigned to the project with all its systems.
    3. /TMWFLOW/CMSCONF is not showing any projects/components. For projects to show up at this transaction I think there are some settings tht I have missed.
    Can anyone walk me through the steps that I need to have done in SMSY, DSWP, Transport management etc that can help me see what I have missed? I must have missed some configuration?
    Is there any Configuration in SPRO to be done?
    Regards
    SN

  • Unable to see option interactive

    hello all,
    i am unable to see the option interactive, in web intelligence options for select view format and also the select a report panel is missing in the web intelligence document preferences.
    i am using BO XI r2.
    thanks

    You can check in CMC-> Applications if the interactive options have been provided for your user.

  • Unable to see LKM

    HI Friends,
    I am using ODI 11g.
    I have a Table to File Interface where i need to use IKM SQL to File Append.
    But in flow control i am unable to see this.
    In my other interfaces its present and working file .
    Any ideas ?
    Thanks,
    Lony

    Is your staging area is selected to other that target ?
    It should be pointing to a RDBMS schema

Maybe you are looking for

  • [SOLVED] ASUS N56VZ FN+FX Keys not working

    I got this new laptop some time ago. I had WIndows 8 running on it, but since I need linux for college I decided to install Arch on it. I removed windows and created a new GUID Partition Table on the Hard drive. sda1 512M EFI Parition sda2 250G Windo

  • Video (mp4) Doesn't Show-up After Published

    Hi Video (in MP4) plays well before published. BUT, after Publishing, the VIDEO Clip disappeared, BUT audio is still playing. What happened? Note: mp4 is reference in my Excel file, and saved in users\...\Videos\xxx.mp4 folder PK Hong

  • Creating SSAS cube on top of a view

    Hi, I have a view which doesn't have ID columns. I want to create an SSAS cube on top of that view. Can someone please suggest how this can be achieved?

  • Lumia 900 - Microsoft Tell Me & Music Playing Defe...

    My Lumia 900 is acting strange while having music playing then hitting the Windows button launching Microsoft Tell Me. At this point, my 3 buttons (Back, Home, Search) is completely unresponsive. To get out of this, I have to reboot the phone. Raisin

  • Odd audio question

    Someone on one of the other shifts keeps changing the audio L/R pan settings. Is there a way to find out what time this is happening by looking at the modified time of a pref file or sometthing? Thanks