RV082 UPnP not working with Back To My Mac

I have several Mac based applications that are not working with UPnP on my RV082 router. It's not listed as a compatible router on Apple's MobileMe Back To My Mac hardware compatibility list. Is there a way to manually configure port forwarding for this application?
Another application that requires UPnP that is not working is El Gato EyeTV.
UPnP is on, and some applications on some computers are clearly able to open ports via UPnP.
I have firmware version 1.3.98-tm.

You will need to contact the vendor/manufacturer of the specific non-Cisco applications (Back to My Mac & El Gato EyeTV) for those application instructions, we don't support them on here.  if the RV082 is working with other devices/applications, then I'd believe that it's specific to those non-Cisco apps that you would need to troubleshoot with the specfic vendors on.
Best Regards,
Glenn

Similar Messages

  • I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

    I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • I downloaded Firefox 4 and tried to launch it. The message said that Firefox will not work with this version of Mac OX. Please advise.

    I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.

    Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?

  • E3000: uPnP not working with Xbox 360

    Hello all,
    So I just setup my new E3000, upgrading from a WRT54G.  The uPnP worked great on that router and my last three routers before that.  Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.
    However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP.  Xbox connectivity test comes back and says that my NAT type is "Moderate".  Most stuff works fine, but I'd like to get it all working.  I worked with a Linksys tech who was very helpful and got NAT to "Open" by configuring triggered port forwarding. 
    I am happy to have my issue resolved, but confused why uPnP didn't work?  I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
    Is there some other configuration change I made that may have upset the uPnP?
    Thanks!
    -Scott
    Solved!
    Go to Solution.

    In case this helps anyone else:
    For the past few months, I have been using static mapping for XBOX live.  I recently updated the firmware on my router to 1.04 and still was having similar problems with uPnP.  So I continued to use static mappings.  One day my IP for the Xbox changed and I got frustrated.
    I tried one thing before giving up on this router:
    1) Held down the reset button for 30 seconds
    2) While still holding it down, unplugged the router for 30 seconds
    3) While still holding it down, plugged back in and continued holding for 30 seconds
    This does a complete reset of the router.  I then re-ran the Cisco connect software (which was also updated recently).  I reconfigured my router the way I wanted.
    Now, Xbox Live uPnP is working!

  • Graphite base station not working with my Intel Based Mac Mini and iPhone.

    My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
    Message was edited by: Soriano

    I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
    In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
    The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
    The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
    After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
    The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
    I hope this helps.

  • Keyboard repeating not working with latest update for mac?

    I just updated my Macbook Pro with a new version of Yosemite and i have come to find that the keyboard repeating function is not working anymore, even with the command: defaults write -g ApplePressAndHoldEnabled -bool false
    in terminal.
    Is there anyway to resolve this? I find the other character extremely annoying that they always pop up
    thank you!

    The repeating function you want has been off by default since 10.7 was released 3 years ago.  That terminal command should normally do the trick.  Did you logout and login again?

  • How can I get iPhoto to work with Lion? It comes up with an error about not working with this version of MAC os.omes up with an error

    Iphoto was working fine until I downloaded and installed LION. Now I get  a problem message to check that iphoto is compatible with this version of MAC OS X.
    I always download software updates.

    Have put iphoto into trash and tried to re-install it from cd, but although it is there on the list when I try to install, it is not in bold and does not permit me to tick it.
    I have been to the app store and it tells me that iphoto is on my computer.

  • EA3500 UPnP not working with QNAP219

    HAve UPnP enabled in the EA3500 but QNAP keep telling me "Your router does not support UPnP protocol or you have not enabled the UPnP function on the router"
    Any idea how to solve this?
    Does anybody know if I need to open the ports manually and how to do that?
    Thanks in advnace

    ARBAWAC wrote:
    Yes, everything else is working properly and connecting to internet with no problems. I have my PS3, internet TV, 4 computers and my computer connecting VPNing to the company that I work for.
    So this is especific between the QNAP and Linksys router
    That doesn't answer my question.

  • My canon EOS DIGITAL ver 24.0 in not working with mac pro os x

    MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X

    Atiya wrote:
    I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
    Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
    I use a 24" LED with my Mac Pro. Works a treat!
    Does this help you? http://support.apple.com/kb/TS2400
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Huawei e180 not working with Lion!!... working fine on Windows PC's but not on new macbook pro. new user to apple

    Any suggestions on why mobile broadband dongle will not work with 10.7. Mac see dongle, opens folder, but returns error message when try to launch.. NEW USER TO MAC

    This thread is a couple of years old but it may answer your question?
    https://discussions.apple.com/message/8978867#8978867

  • Can I use ARD to control my mac with Back to my Mac service?

    Can I use ARD to control my mac with Back to my Mac service?
    The with Back to my Mac service on you see your mac in the Shared column, hit Share Screen & your good - on ARD I don't see my remote Mac listed anywhere in that program.
    Thanks

    ARD, to the best of my knowledge, does not work via Back To My Mac. Certainly it's not an direct or obvious feature, though I can't say that there might not be a workaround I've not heard of.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

    I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

    It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

  • My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

    My macbook pro is just back from repairs.  It is not working with my apple led cinema display. I have followed the directions in the cinema display manual.  am I missing something?

    Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate.  Displays will probably try to put the panel for the ACD on the ACD where you won't see it.  So click "Gather Windows" to get the ACD panel on to your macbook.
    One more thing, make sure you fully seated the mini displayport plug.  They can be sneaky little devils in that they need to be fully pushed in.

  • Norton 360 premier is not compatible and the identity safe does not work with firefox 4 it worked with earlier version. If there is a solution great otherwise I am going back to IE.

    All my passwords are Norton identity safe protected. If firefox4 does not work with it I am forced to go back to IE. Previous versions had a patch. I only realized the problem after downloading the new update. I wish I never had.

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Maybe you are looking for

  • Why can't I use face time on iPad 2 with 3g iOS 6.0.1

    why can't I use face time on ipad2 with 3g and ios 6.0.1

  • Sending an email to multiple recipients

    I'm trying to send to an email to to a few hundred addresses (a gig announcement- I'm a musician), and Apple Mail won't let me. The addresses are in a group in the Address Book. I use to do this on my G5, but this computer won't allow it, even though

  • Permissions Metadata User for System Connection in CE 7.2

    Hi, I want to create a system connection in NWA to an R/3 system with WSIL as service source. The Metadata User has SAP_ALL and SAP_NEW. But when I ping the system, following error is displayed: u201CUser credentials are valid but user does not have

  • I can't update my Photoshop CS6

    I just bought a new Macbook Pro retina display so I passed all my program from my old laptop to this new one, but my photoshop and all my other programs look pixelated so I read that I had to update the programs so it won't look pixelated. I download

  • CS3 on Windows 8

    I have CS3 I bought as a student in 2007. I bought a new laptop with Windows 8 and I am able to fully install CS3 and do design work. However, every few weeks, the programs won't start and tell me to perform a reinstall. I do and it works fine for a