RV082 v3 hardware and WAN1 without link(LED)

Hi,
We have a RV082 hardware version 2. (I stated wrongly that I had v3 hardware)
The problem is really stange:
- doing a hard reset (30, 30, 30 procedure) and after loading the firmware 1.3, the WAN1 o WAN2 link LED does not turn on. In the web admin interface, both port appears disconnected. Connecting the same cable in port 1, it works.
- then, upgrading to firmware 2.0, in snmp the WAN1 does not show traffice, only the LAN Interface. And the data of the snmp is wrong (reporting million of packets/s), so there is no way to monitor activity.
My question, is the hardware malfuntioning? If so, why does it works with firmware 2.0 but report bad snmp data? Also, why does not work with firmware 1.3?
Many thanks
Oliver
changed to v2 hardware

The problem en RV082 with firmware 2.x is that the DNA queries are not resolved from a Mac OSX client.
Test opening Mac App Store you will see missing icons, reboot to 1.3 firmware and problem solved. I obviously tested many things like factory reset, etc
Thanks
Oliver
Sent from Cisco Technical Support iPhone App

Similar Messages

My mouse pointer auto starts links and bookmarks without clicking on them . is there a way to stop this?

i am on a desktop pc .i use a perrixx usb keyboard and touchpad mouse .it looks like a laptop keyboard.# Question
my mouse pointer auto starts links and bookmarks without clicking on them . is there a way to stop this?

this should not be happening, maybe one of your addons is interfering?! - can you try running firefox in safemode or with all extensions disabled for a while and see if this behaviour is still there...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

How to use multiple iPods, iPads, or iPhones with one computer

How to check server hardware and OS issue without offline DB server

Hi Experts,
For checking hardware issue, do we have any way to check server hardware and OS performance without offline server?
any way we could rule out bad hardware causing the problem without offline server?
Thanks
Jim

I think your answer depends on the nature of the hardware issue you think you may be having, whose hardware you have, and the OS your are running on that hardware. Such as on UNIX there are several error logs that record errors related to the system including detected hardware issues and you have numerous utilities like vmstat and iostat that can be used to measure performance. Some disk units linclude their own diagnostics modules you can run.
If you really want help I think you have to be a lot more specific about the problem you are facing.
HTH -- Mark D Powell --

HT2341 When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?

When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?
Also, I apparently have to replace my battery. Could the problem have any relevance to a dead battery?

Have you held the power button down for 10+ seconds? That should turn it off.
Ciao.

Multiple-point Hardware And Software Failures in Two, Separate and Not-connected Computers At The Same Time...

A few days ago, I was working on a restoration of a 100-years-or-so-old Calculus book on one of my Linux based computers, while my other computer with the Microsoft Windows Vista operating system was serving as Broadcast TV receiver with its USB HDTV tuner
in the afternoon. The weather in Los Angeles was summer-like in November, with clear skies and 90 degree Fahrenheit temperatures. All of a sudden, my Linux based computer halted in the middle of the processing it had performed hundreds of times
before in hotter days. It would not restart. The entire boot block of the disk seemed to have been garbled. This did not seem even feasible at all, so I decided to shut its power off for a while. It came back up after a while,
and everything looked normal. Then, it did the same thing again. I decided to open its cover and check on its multiple fans as there was nothing else that could go wrong.
I then noticed that the computer with the Microsoft Windows Vista Operating system which had been receiving the broadcast TV, was displaying a freshly-booted log-in screen. It had "Blue-screened" while I was working on the other computer
across the large room. This again did not seem any feasible as there had been utterly no connection between these two computers. Even the AC power line circuit was different. Furthermore, this computer had the most extensive air-cooling system
I had built to have it work through 107 degree Fahrenheit temperatures indoors. Anyway, I logged back in and started the broadcast TV reception again. Sure enough, after a while it "blue-screened" one more time...
I went back to the Linux-based computer and found all of its fans operating, but with somewhat hotter disk drives. The problem was that in hotter days, the same computer had cooler disk drives with nothing different. I concluded that somehow
the 80 mm fan mounted in the front side of the case, with its side with rotating blades clamped on the perforated part of the steel case serving as the fan grill, was starting up fine. But, as the time passed the spring-loaded rotating hub was slowly
drawn toward the perforated steel case by two means: The partial vacuum formed by the suction generated by the blades of the fan, and by the magnetic attraction of the rotating hub with electro-magnets in it to the partially magnetized, perforated steel casing.
The first effect was always there, so it was not the real cause, but once something else came along, it really helped the latter. The hub was slowly drawn to the perforated steel casing due to magnetic attraction, with the holes in the casing
inducing a huge air-drag on the hub blades as there was no by-pass around to supply the extra-air needed to reduce the partial vacuum. In addition, the rotating hub with the electro-magnets now was very close to the conducting metal surface and the induced
eddy-currents in the metal by the moving electro-magnets had added even more drag on the rotating hub, causing it to come nearly to a halt. The disk drive electronics was heating up and was causing DMA access faults which in turn caused the Linux kernel
to panic and halt.
Well, this was nearly unbelievable, but true... I had not brought any magnets into the room and I still do not know how the computer case got magnetized. It has been working at the same location for years. The solution was to move the fan
away from the perforated steel casing a little so that some air could come in through the gaps on the sides of the fan (hence supplying a by-pass), reducing the partial vacuum in front of the fan. This kept the rotating hub far enough away to prevent
the massive induced eddy-current drag from slowing the fan down to a halt. The computer now works perfectly with the very same fan as it has had been doing for years.
The real solution is to saw the perforated part of the steel casing in front of the fan away, and to replace it with a better fan grill. The best fan grill material I have found is the finely perforated, thin, black aluminum sheet that is usually
used as a car audio speaker grill. In fact, I use these in my Microsoft Windows Vista based computer. The fans are quieter, with more air flow. It also keeps dust away and you can brush the collected dust off easily.
The next problem was the halting of the computer with the Microsoft Windows Vista operating system with a blue-screen. The fans in it could not be the cause of this, as it had already had the best improvements I could put in it, with even
externally powered fans that did not load the computer power supply. And, all of the fans were working well. In the meantime, the Microsoft November 2014 updates for the Microsoft Windows Vista came out, and as usual I told the computer to
load and to implement them. Sure enough, the computer again "blue-screened" in the middle of the update procedure.
That was somewhat too much, but there was nothing else I could do other than to debug it. I had not changed anything in the computer and its power supply, completely internally updated by myself a few years ago, was working perfectly. Whatever
was causing it was not in the hardware. It was not in the November 2014 software updates either as it "blue-screened" before those were announced. I brought the computer back up after several disk and other software checks and after the
completion of the updates, I gingerly turned the network modem on. I then sent the reports on the six failures (three "blue-screen" type failures and three "Anti-malware Executable" failures) to Microsoft with all of details
requested using the Microsoft Windows Vista problem reporting system. Within minutes, the Microsoft came up with a diagnosis that the USB driver code in the system had a serious bug. I had not changed this code in years. It suggested that
I should use the "Microsoft Fix-It" for this problem and it pointed to a link to download it. I did download it. It ran and the "blue-screen" problem just went away, as if it had never been there...
-- Yekta

I ordered the capacitors on Friday and they arrived on Monday, November 17, 2014. I removed the motherboard from the machine, by removing all PCI and AGP boards, drive and fan connectors and the computer power supply first. The motherboard then
simply unbolted from the case and came out with the CPU fan assembly still attached.
I wrapped the solder side of the motherboard with aluminum foil and set up a work place with the aluminum foil under the motherboard and myself electrically well grounded. Here came another surprise: There were four more capacitors of the same
kind just behind the CPU fan assembly and their tops were also deformed with one of them leaking the electrolyte inside from the the top. Luckily, I had ordered more than two capacitors to get the quantity discount and the lower rate of shipping.
I do use them in other circuits I occasionally build.
Technically, the only thing one needed to do was to unsolder the six old capacitors from the motherboard and to solder six new ones in in their place with the correct polarities. However, due to fact that the capacitors span the 3.3 V power plane and
the ground plane in the multi-layer motherboard, it is nearly impossible to unsolder these capacitors using regular, fine-tip soldering irons. The thick copper of the power and the ground planes carry the soldering iron heat away very fast, preventing
the solder from melting quickly. Continuous application of heat at this point will simply burn the internal insulating epoxy layers and cause shorts inside the motherboard which are impossible to fix in any reasonable amount of time.
The only reasonable way to remove these capacitors was to dismantle the capacitors from the top leaving their already soldered leads in place. The new capacitors were then tack soldered to these stubs using lead-free, hard solder. However, the
CPU fan assembly and the CPU itself had to be removed from the board to be able to work on these capacitors.
To dismantle the capacitors from the top, I first drilled small holes at the tops of the capacitors at the intersections of the indentations using the tip of a hobbyist's knife. I then used needle nosed pliers to peel back the triangular sections
of aluminum from the center at the tops to their bases at the top edges of the capacitors. Next, I removed the plastic layers covering the outside of the capacitors by scoring the plastic layers first from the bottom to the top using the tip of
the hobbyist's knife and peeling the plastic layers off starting at the cut. The following step was to cut the aluminum cans of the capacitors from the top to the bottom using the hobbyist's knife like a can opener. One could not use a saw like
tool here to accomplish the feat as the saws generated very fine metal chips which were very hard to remove and were certain to cause shorts in the densely populated mother board. The cans were then peeled off the rest of the capacitors starting from
the top at the cuts using needle nose pliers, revealing the spiral-wound metal-paper layers of the capacitors.
The wound layers of the capacitors were peeled off layer by layer by cutting into the layers from the top to the bottom, leaving only the two aluminum electrodes which were crimped and soldered to the leads of the capacitors. The picture below shows
the six capacitors with one of them dismantled (left) and with all of them dismantled (right):
The black disks below the aluminum electrodes are the rubber plugs covering the bottoms of the capacitors. The rubber plugs were then cut in half using the hobbyist's knife and removed using the needle nose pliers. It was not possible to
solder to the aluminum electrodes, so these were trimmed at the point they were crimped on the leads of the capacitors, leaving only the stubs of the capacitors' leads soldered to the motherboard.
The new capacitors with suitably trimmed leads were then soldered to these stubs with the correct polarities using lead-free, hard solder. The capacitors were lightly bonded together using a flexible glue to prevent them from moving. The picture
below shows the new capacitors as installed into the motherboard:
I then assembled everything back together and turned the computer on. The BIOS complained on the boot screen that the CPU was out of its socket and it needed to be reset. I set BIOS parameters correctly to their original values. The computer
came up and worked without any problems. I typed this message on my newly repaired computer running the Microsoft Windows Vista operating system.
By the way, the manufacturing date on the motherboard is 09/12/2002 and the CPU is a Socket-478, 2.4 GHz, Intel Pentium-4.
-- Yekta

Wifi is connected and has good link and traffic is shown but no IP connectivity possible

I'm getting crazy about that:
iMac 27" Mid 2011, Airport Extrem/Atheros 9380 Core WLAN 4.0 (400.45.1) is connected with approx. 80% link quality (SNR: 45dB, Noise: 1%) to an 802.11n AP with 5GHz an 80MHz with at least 4 other Clients.
The link acts with 270-300 Mbit/s and is pretty good, but sometimes (without any change on network settings or configurations) the IP-connectivity get's lost.
Airport is further connected, traffic counters rise (both RX and TX), while other iMacs (some with similar hardware) are accessing without problems.
How does ist look like:
IP-Address (DHCP is enabled on en1) is bound to the interface and I can ping the local IP-address but NO other IP in LAN (for example the standard gateway).
no ARP requests or broadcasts are shown (except from the local machine)
What did I do for troubleshooting:
created new network location and added new wifi connection
AP reboot
Apple WiFi Diagnostics:
10/29/13 08:35:14.9200
WAN: WiFi interface can ping DNS server 17.254.0.50 . . . pass
10/29/13 08:35:21.9220
No LAN Connectivity
10/29/13 08:35:23.9240
No LAN Connectivity
10/29/13 08:35:25.3650
Scan Cache Updated
10/29/13 08:35:25.9260
No LAN Connectivity
10/29/13 08:35:27.9290
No LAN Connectivity
10/29/13 08:35:27.9290
LAN: WiFi interface can ping IPv4 router 192.168.x.y . . . fail
10/29/13 08:35:27.9290
UNEXPECTED DROP DETECTED!!!
There is no way to use IP communication at this point. The only solution is to reboot or to switch off WiFi an switch on again.
Those problems occure sometimes once a day and another day after every minute!
This is, what wifi.log means at this point:
Tue Oct 29 08:35:25.183 <kernel> scanner_state_suspending_traffic_event state=SUSPENDING_TRAFFIC event=OFFCHAN_SWITCH_FAILED
Tue Oct 29 08:35:25.183 <kernel> scanner_state_suspending_traffic_event retries=02/03
Tue Oct 29 08:35:25.283 <kernel> scanner_state_suspending_traffic_event state=SUSPENDING_TRAFFIC event=OFFCHAN_RETRY_EXPIRE
Tue Oct 29 08:35:25.283 <kernel> HSM: ResMgr :current state BSSCHAN event OFFCHAN_REQUEST[7]
Tue Oct 29 08:35:25.283 <kernel> ieee80211_resmgr_off_chan_scheduler_bsschan_event_handler : Entry
Tue Oct 29 08:35:25.283 <kernel> ieee80211_resmgr_oc_check_and_change_state oc_scheduler_state 0 vap_needs_scheduler 0
Tue Oct 29 08:35:25.283 <kernel> ieee80211_resmgr_off_chan_scheduler_bsschan_event_handler let the normal bsschan event handler handle the event
Tue Oct 29 08:35:25.283 <kernel> HSM: ResMgr: transition BSSCHAN => CANPAUSE
Tue Oct 29 08:35:25.283 <kernel> 97761.264 | scanner_state_suspending_traffic_entry
Tue Oct 29 08:35:25.283 <kernel> HSM: ResMgr :current state CANPAUSE event VAP_CANPAUSE_TIMER[9]
Tue Oct 29 08:35:25.304 <kernel> HSM: ResMgr :current state CANPAUSE event VAP_CANPAUSE_TIMER[9]
Tue Oct 29 08:35:25.304 <kernel> HSM: ResMgr: transition CANPAUSE => PAUSING
Tue Oct 29 08:35:25.365 <kernel> HSM: ResMgr :current state PAUSING event VAP_PAUSE_FAIL[5]
Tue Oct 29 08:35:25.365 <kernel> 97761.345 | ieee80211_scan_handle_resmgr_events: state=SUSPENDING_TRAFFIC event OFFCHAN_SWITCH_COMPLETE (1) status=00000005
Tue Oct 29 08:35:25.365 <kernel> HSM: ResMgr: transition PAUSING => BSSCHAN
Tue Oct 29 08:35:25.365 <kernel> scanner_state_suspending_traffic_event state=SUSPENDING_TRAFFIC event=OFFCHAN_SWITCH_FAILED
Tue Oct 29 08:35:25.365 <kernel> scanner_state_suspending_traffic_event retries=03/03
Tue Oct 29 08:35:25.365 <kernel> 97761.345 | scanner_terminate: reason=MAX_OFFCHAN_RETRIES pause_requested=0
Tue Oct 29 08:35:25.365 <kernel> 97761.345 | scanner_state_idle_entry
Tue Oct 29 08:35:25.365 <kernel> vap-0: ieee80211_state_event: VAP state event 3
Tue Oct 29 08:35:25.365 <kernel> vap-0: ieee80211_connection_sm_scan_evhandler event 1 reason 5
Tue Oct 29 08:35:25.365 <kernel> ieee80211_notify_scan_done: notifying scan is done
Tue Oct 29 08:35:25.365 <kernel> getSCAN_RESULT: pid[0]:'kernel_task': mySSID (81ms)
Tue Oct 29 08:35:25.365 <kernel> getSCAN_RESULT: pid[0]:'kernel_task': All scan results retrieved
Tue Oct 29 08:35:25.365 <kernel> IO80211ScanManager::scanDone: Scheduling cache purge timer in 30 seconds.
Tue Oct 29 08:35:25.365 <kernel> vap-0: HSM: connection :current state CONNECTED event SCAN_CANCELLED[8]
Tue Oct 29 08:35:25.365 <kernel> vap-0: HSM: connection : event 8 not handled in state CONNECTED
Tue Oct 29 08:35:25.365 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'WiFi Signal' (pid 10656).
Tue Oct 29 08:35:25.366 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from 'locationd' (pid 96) ().
Tue Oct 29 08:35:25.366 <kernel> IO80211ScanManager::getScanResult: All scan results returned for 'locationd' (pid 96).

Same identical issue and logs for m. expect it says WAN instead of LAN on the failure
Bump, anybody?

I have produced several short iMovie projects and want to link them into a continuous stream on a DVD. Can it be done? All of the projects are in my Moblie Me Gallery

I have produced several short (2 to 3 minute) iMovie projects and want to link them in a continuous stream on a DVD. The clips are in my Mobile Me gallery. How can it be done?

You can do that too, it's all in the iDVD program.
But first you want to assemble the separate clips into one big long clip. For that you would use iMovie. Share to the Media Browser (choose the Large size). Let it export then quit iMovie.
Open iDVD, click on the Media button and then the Movies button. Under the iMovie star icon you will see your final assembled clips movie. In the iDVD project window turn on the map view (it's little boxes that look like a flowchart) then drag the iMovie project into the first box:
You can set the project to startup without a Menu, and then loop continuously as well. Go up to the Advanced Menu then click on the Loop movie option to turn it on.
Once checked the Loop movie status will appear as curved arrow icon in the Project Window:
In the lower right corner is the icon indicating this video clip will loop while being played.

Error message without link to field

I have a page where I am entering some information and saving it. I am using a VO which is based on an EO. I have two instance of this VO. One is being populated from the page and other one is being populated in the background.
I have put some validation in EO and using following code in validateEntity()
    if (getTotEngHrs() == null)
        throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
                                  getEntityDef().getFullName(),
                                  null,
                                  "TotEngHrs",
                                  getTotEngHrs(),
                                  "CRM",
                                  "CINT_CRM_TOT_ENG_HRS_NULL");
When I try to save data without entering any value in TotEngHrs field. I do get the error but without any link to this field (just get the plain message). I then enter value in some other field and save it again and I start getting the error with link to those field.
Is there anyone who can help me in this?
Thanks in advance

Just in case it's not clear from above.
If I don't enter value for TotEngHrs I get error as I should be but without link to the field ..when I hit save second time the link to error field does appear.

Insert picture and sound without external sources

how can we insert pictures and sound without using external sources??
i mean , i want to make the picture somehow embeded inside the program, not from external source,
can any1 help?/

I sense that what you need to do is create a Jar (java archive) file for your code and images and any other resources. Do a search on the forum for the terms -- jar pictures getresource -- and you'll get a ton of helpful threads. Also check Google. Some useful links:
http://java.sun.com/docs/books/tutorial/deployment/jar/
http://forum.java.sun.com/thread.jspa?forumID=54&threadID=5183949
http://www.cs.princeton.edu/introcs/85application/jar/jar.html

Attached document without link

Hello experts,
when we attach a file to an account in the area "attachments", we don't get the blue linked name of it, the name is black without link, so it is not possible to access this document. It's the same problem in campaigns, when we attach a document there.
How can we get the link to access the uploaded document?
Thank you for you help,
Martin

Hey guys,
the strange thing is, in our Development-System it works, we get the link, but not in our Productive System?!
So it can't be the browser settings.
I checked context node doclist and method get_p_kw_relative_url in attribute struct.kw.relative_url, the method is implemented...
Any other ideas?
Thanks a lot!
Martin
Edited by: MartinSch on Aug 19, 2009 11:17 AM

When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Community Members and Knowledge Directory Link

Hi,
I'm using the support centre nav scheme but can't get the 'Community Members and Knowledge Directory' link to appear (the one that appears like an extra community page).
I've set the property in the Community Wizard but that doesn't work. And I've tried to do it by amending the code for the nav scheme, but can't get it to appear. It appears to be the way the page links are generated in the nav scheme code, but this link isn't a page. And I can't figure out how it's generated in the native nav scheme code.
Anyone got this to work, or have any ideas about to get it work?
Thanks in advanceDavin

I believe the support centre navigation does not display the knowledge directory link. You would need to add it yourself. The GetCurCommPages call on CommunityNavPage will give you the Community pages inside the current community and the knowledge directory link. If you just want the knowledge directory link without the mypages, you would need to create it yourself. Look in GetCurCommPages in NavigationModel for example.

Service with party and service without party

Hi all,
Can any body please suggest me when do we choose service with party and service without party?
We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
Any links related to a Web Blog / Thread would be great.
Thanks and best regards,
Kulwant Singh

hi
1.we go for service without party when we are having A2A communication.
A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
refers to link
http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
2.we go for service withparty when we are having B2B communication
B2B means Business to Business communication .It is used when there is exchange of information between two different Parties or companies or landscape.
When two applications in different companies communicates with each other we call it B2B Communication.
in case of B2B every party has it own rules which must be followed if we want to communicate between different organization.
refers to link
http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
rewardspoints if helpful
BR
Kasturika
Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

RV082 v3 hardware and WAN1 without link(LED)

Similar Messages

Maybe you are looking for