RV082 VLAN's - How can I find out which clients are on them?
We have an RV082 router and two of the ports are designated as VLAN2 and VLAN3, the router interface only gives a status report of the port but I can't find anyway to see which computer's are on those VLAN's. Is there anyway to do this? Thank you.
The router is DHCP, I can see everybody that way but what I was wondering because that information isn't on the DHCP status window is who is on let's say, we have 3 VLANS setup in the router, the router tells me through System Summary Port Stats which port is set to which VLAN but I do not see anywhere in the router interface which IP addresses are going to VLAN1, VLAN2 or VLAN3 for instance. It does not show this in the Port Management screen either. Was wondering if there is some way to see this in CMD? I do not know how to interface with the 3 switches we have in CMD either. I am just an old A+ guy in a small company who knows how to fix computers but don't know much about networking. I was put into this position because I could change out a video card so they thought I was the guy to run the network because they can't afford to do much more than that with the economy in a shambles. Thanks for any help you can give me.
Dean
P.S. I'm really a drafter.
Similar Messages
-
My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
Yellow12It may be that the 10 songs are unchecked. To find them select songs view.
If there is a column Heading marked with a tick then click on it to sort by this column.
If the Column is not there then View > View Options and select the Checked column which will then display
Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well -
How can I find out which tables are having DDL locks?
I can see related information by querying DBA_DDL_LOCKS view, but it doesn't give me the information which tables are having DDL locks.
Is there a way I can find out which tables are having DDL locks?
Thanks!Here's a long script written back in 2001. Still works:
BREAK on sid on serial# on username
COL sid for 9999
COL serial# for 99999
COL username for a20
COL type for a20 trunc
COL lmode for a5 trunc
COL lrequest for a4 trunc
COL detail for a75 trunc
SELECT s.sid
, s.serial#
, s.username
, DECODE(
l.TYPE
-- Long locks
, 'TM', 'dml/data enq (TM)'
, 'TX', 'transac enq (TX) '
, 'UL', 'pls usr lock (UL)'
-- Short locks
, 'BL', 'buf hash tbl (BL)'
, 'CF', 'control file (CF)'
, 'CI', 'cross inst f (CI)'
, 'CU', 'cursor bind (CU) '
, 'DF', 'data file (CF) '
, 'DL', 'direct load (DL) '
, 'DM', 'mount/strtup (DM)'
, 'DR', 'reco lock (DR) '
, 'DX', 'distrib tran (DX)'
, 'FI', 'sga opn file (FI)'
, 'FS', 'file set (FS) '
, 'IN', 'instance num (IN)'
, 'IR', 'instce recvr (IR)'
, 'IS', 'get state (IS) '
, 'IV', 'libcache inv (IV)'
, 'JQ', 'job queue (JQ) '
, 'KK', 'log sw kick (KK) '
, 'LS', 'log switch (LS) '
, 'MM', 'mount def (MM) '
, 'MR', 'media recvry (MR)'
, 'PF', 'pwfile enq (PF) '
, 'PR', 'process strt (PR)'
, 'RW', 'row wait (RW) '
, 'RT', 'redo thread (RT) '
, 'SC', 'scn enq (SC) '
, 'SM', 'smon lock (SM) '
, 'SN', 'seqno instce (SN)'
, 'SQ', 'seqno enq (SQ) '
, 'ST', 'space transc (ST)'
, 'SV', 'seqno value (SV) '
, 'TA', 'generic enq (TA) '
, 'TD', 'dll enq (TD) '
, 'TE', 'extend seg (TE) '
, 'TS', 'temp segment (TS)'
, 'TT', 'temp table (TT) '
, 'UN', 'user name (UN) '
, 'WL', 'write redo (WL) '
, 'TYPE = ' || l.TYPE) AS type
, DECODE(l.lmode, 0, 'none', 1, 'null', 2, 'RS', 3, 'RX', 4, 'S', 5, 'SRX', 6, 'X', TO_CHAR(l.lmode)) A
S lmode
, DECODE(l.request, 0, 'none', 1, 'null', 2, 'RS', 3, 'RX', 4, 'S', 5, 'SRX', 6, 'X', TO_CHAR(l.request
)) AS lrequest
, DECODE(
l.TYPE
, 'JQ', 'Job #' || j.job || ' (' || j.what || ') owned by: ' || j.username
, 'MR', DECODE(s.user_type, 'BG', 'DICTIONARY OBJECT', LOWER(obj.owner) || '.' || LOWER(obj.name))
|| ' (' || LOWER(obj.TYPE) || ')'
, 'RT', 'thread #' || LOWER(l.id1)
, 'RW', 'file#' || LOWER(SUBSTR(l.id1, 1, 3)) || ', block#' || LOWER(SUBSTR(l.id1, 4, 5)) || ', ro
w#' || LOWER(l.id2)
, 'TD', 'object: ' || LOWER(obj.owner) || '.' || LOWER(obj.name) || ' (' || LOWER(obj.TYPE) || ')'
, 'TM', 'object: ' || LOWER(obj.owner) || '.' || LOWER(obj.name) || ' (' || LOWER(obj.TYPE) || ')'
, 'TS', DECODE(l.id2, 0, 'enqueue', 'new block allocation')
, 'TX', DECODE(
lo.object_name
, NULL, 'rbs #' || TRUNC(l.id1 / 65536) || ', slot #' || LOWER(l.id1)
, 'rbs #' || TRUNC(l.id1 / 65536) || ', slot #' || LOWER(l.id1) || ', object: ' || LOWE
R(lo.object_name))
, 'UL', 'lock name: ' || la.name || ', expiration date: ' || TO_CHAR(la.expiration, 'DD-MON-RR HH2
4:MI:SS')
, 'WL', 'redo log file#' || LOWER(l.id1)
, 'id1 = ' || l.id1 || ', id2 = ' || l.id2) AS detail
FROM sys.v_$lock l
, (SELECT a.sid
, a.serial#
, NVL(a.username, 'SYS (' || LOWER(b.name) || ')') AS username
, DECODE(a.username, NULL, 'BG', 'USER') AS user_type
FROM sys.v_$session a
, sys.v_$bgprocess b
WHERE a.paddr = b.paddr(+)) s
, (SELECT o.obj#
, u.name AS owner
, o.name
, DECODE(
o.type#
, 0, 'NEXT OBJECT'
, 1, 'INDEX'
, 2, 'TABLE'
, 3, 'CLUSTER'
, 4, 'VIEW'
, 5, 'SYNONYM'
, 6, 'SEQUENCE'
, 7, 'PROCEDURE'
, 8, 'FUNCTION'
, 9, 'PACKAGE'
, 11, 'PACKAGE BODY'
, 12, 'TRIGGER'
, 13, 'TYPE'
, 14, 'TYPE BODY'
, 19, 'TABLE PARTITION'
, 20, 'INDEX PARTITION'
, 22, 'LIBRARY'
, 23, 'DIRECTORY'
, 24, 'QUEUE'
, 28, 'JAVA SOURCE'
, 29, 'JAVA CLASS'
, 30, 'JAVA RESOURCE'
, 32, 'INDEXTYPE'
, 33, 'OPERATOR'
, 34, 'TABLE SUBPARTITION'
, 35, 'INDEX SUBPARTITION'
, 39, 'LOB PARTITION'
, 40, 'LOB SUBPARTITION'
, 43, 'DIMENSION'
, 44, 'CONTEXT'
, 47, 'RESOURCE PLAN'
, 48, 'CONSUMER GROUP'
, 51, 'SUBSCRIPTION'
, 52, 'LOCATION'
, 'UNDEFINED') AS type
FROM sys.obj$ o
, sys.user$ u
WHERE o.owner# = u.user#) obj
, (SELECT vlo.xidusn
, vlo.xidslot
, vlo.xidsqn
, vlo.process
, o.owner || '.' || o.object_name AS object_name
FROM sys.v_$locked_object vlo
, sys.dba_objects o
WHERE vlo.object_id = o.object_id) lo
, (SELECT job
, schema_user AS username
, what
FROM dba_jobs) j
, sys.dbms_lock_allocated la
WHERE l.sid = s.sid
AND l.id1 = obj.obj#(+)
AND l.id2 = j.job(+)
AND TRUNC(l.id1 / 65536) = lo.xidusn(+)
AND LOWER(l.id1) = lo.xidslot(+)
AND l.id2 = lo.xidsqn(+)
AND l.id1 = la.lockid(+)
AND l.TYPE != 'MR'
UNION ALL
/*** LATCH HOLDERS ***/
SELECT s.sid
, s.serial#
, s.username
, 'latch'
, 'X'
, 'none'
, h.name || ' addr=' || LOWER(RAWTOHEX(laddr)) AS object
FROM sys.v_$process p
, sys.v_$session s
, sys.v_$latchholder h
WHERE h.pid = p.pid
AND p.addr = s.paddr
UNION ALL
/*** LATCH WAITERS ***/
SELECT s.sid
, s.serial#
, s.username
, 'latch'
, 'none'
, 'X'
, name || ' latch=' || p.latchwait AS object
FROM sys.v_$session s
, sys.v_$process p
, sys.v_$latch l
WHERE latchwait IS NOT NULL
AND p.addr = s.paddr
AND p.latchwait = l.addr
ORDER BY sid
, serial#
, username
, 4
, 5
, 6
, 7; -
i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?
This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge! -
I share an itunes account with 3 users. How can I find out which person downloaded a certain app?
Agile,
Any of the above will work, depending how you would like to set it up.
Given that kids tend to eventually grow up and be independent, the best long term answer for most people is to let her have her own account and her own library as soon as she can handle it. Keep in mind that content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, so separating later is a challenge.
If you want to sync multiple devices to the same library, that will work. Or if you want separate libraries (as I would recommend), they can be either on separate computers or on separate Windows user accounts on the same PC.
For the name change: Connect the device. When the name appears in the left sidebar of iTunes, highlight it and change it. -
I´ve switched to iphone 4S from my 3Gs and would like to "clean" my itunes Sync before I use the new phone. Problem is, that the synchronisation with Outlook 2003 doesn´t work anymore. I guess the reason is that itunes refers to an old .ost or .pst file on my computer. I ve got several outlook profiles and changed from exchange to pop3. My question: How can I find out which .pst or .ost file itunes referres to?
Thanks a lot in advance :-)Select the tune and then - Get Info - in the dialog box is a note of the Apple ID used to purchase.
MJ -
I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks
Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.
-
Are not the right ones for the icloud account. How can I find out what these are?
I have downloaded icloud onto my PC. When I try to access my account I am told that although my Apple ID and password are correct they are not the right ones for the icloud account.How can I find out what these are?
Christine Helen wrote:
I can't find any way of creating an icloud ID. I only have a PC. no Mac product except an iPod classic.
Oh, then you can't unless you know someone with a Mac you could use for a moment or 2. (Like at the Apple Store) -
How can i find out which network my iphone is locked to
Sorry if iv posted this in the wrong section.well the question is quite simple. how can i find out which network my iphone 4s is locked to, without purchasing sim cards from every network.
I just bought the phone second hand with no sim as a birthday present for my wife with the intention of getting it unlocked (not jailbroken)
If any body can give me any advice it would be greatly appreciated.call Apple
-
How can I find out whitch table are used in whitch document?
How can I find out whitch table are used in whitch document?
In the table EUL5_DOCUMENTS are stored the Documents and in the table EUL5_OBJS are stored the tables. How can I query these tables together?
Are there other possiblities?
ThanksHi Dierk
Please take a look at this thread: Re: An EUL query to list out All the Columns (Fileds) for each Workbook
I think you may well find what you are looking for in the answer that I gave there.
Best wishes
Michael -
How can I find out what apps are on my step daughters phone without the phone?
How can I find out what apps are on my step daughters phone without the phone? She is on my phone plan but does not live with me and I am concerned about the apps she may be using.
baniville108,
Thank you for reaching out to us. We certainly know the importance of being able to know what options are available with your device. With apps on devices, thoses are specific to the phone itself, so there is no open forum to view what apps are downloaded. The only option would be to physically review from the phone, or if you have the same Apple ID you can log into it and view from there. Please let us know if you need anymore assistance.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport -
HT1338 HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING?
HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING, KEEP GETTING MICROSOFT SQL SERVER ERRORS
WHEN TYPING IN ADDRESS'S?If your computer is tied to a network, then there is a way to check. Go to System Preferences, and click Accounts. unlock Admin
then you can click Login Options.
under that, Network Account Server. This should show you what server your computer is tied to. If you aren't in the tech department, you could try asking them. -
HT4211 how can you find out what kb are being used by what apps
how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone
Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.
-
I have a MacBook 6,1 and have a number of start up discs. How can I find out which one came with my model?
They sometimes have that information on the label. Otherwise, it's trial and error. The model you have is a Late 2009 13" MacBook. It came with a special version of 10.6.1 pre-installed.
-
How can I find out what objects are in a datafile???
My database is 8.1.7...
I have a tablespace with multiple datafiles. How can I find out what objects are in a specific datafile???
Thanks in advance...DBA_SEGMENTS
DBA_SEGMENTS describes the storage allocated for all segments in the database.
Related View
USER_SEGMENTS describes the storage allocated for the segments owned by the current user's objects. This view does not display the OWNER, HEADER_FILE, HEADER_BLOCK, or RELATIVE_FNO columns.
Column Datatype NULL Description
OWNER
VARCHAR2(30)
Username of the segment owner
SEGMENT_NAME
VARCHAR2(81)
Name, if any, of the segment
PARTITION_NAME
VARCHAR2(30)
Object Partition Name (Set to NULL for non-partitioned objects)
SEGMENT_TYPE
VARCHAR2(17)
Type of segment: INDEX PARTITION, TABLE PARTITION, TABLE, CLUSTER, INDEX, ROLLBACK, DEFERRED ROLLBACK, TEMPORARY, CACHE, LOBSEGMENT and LOBINDEX
TABLESPACE_NAME
VARCHAR2(30)
Name of the tablespace containing the segment
HEADER_FILE
NUMBER
ID of the file containing the segment header
HEADER_BLOCK
NUMBER
ID of the block containing the segment header
BYTES
NUMBER
Size in bytes, of the segment
BLOCKS
NUMBER
Size, in Oracle blocks, of the segment
EXTENTS
NUMBER
Number of extents allocated to the segment
INITIAL_EXTENT
NUMBER
Size in bytes requested for the initial extent of the segment at create time. (Oracle rounds the extent size to multiples of 5 blocks if the requested size is greater than 5 blocks.)
NEXT_EXTENT
NUMBER
Size in bytes of the next extent to be allocated to the segment
MIN_EXTENTS
NUMBER
Minimum number of extents allowed in the segment
MAX_EXTENTS
NUMBER
Maximum number of extents allowed in the segment
PCT_INCREASE
NUMBER
Percent by which to increase the size of the next extent to be allocated
FREELISTS
NUMBER
Number of process freelists allocated to this segment
FREELIST_GROUPS
NUMBER
Number of freelist groups allocated to this segment
RELATIVE_FNO
NUMBER
Relative file number of the segment header
BUFFER_POOL
VARCHAR2(7)
Default buffer pool for the object
This view with this another viwe can help you to identify where the object is:
DBA_DATA_FILES
DBA_DATA_FILES describes database files.
Column Datatype NULL Description
FILE_NAME
VARCHAR2(513)
Name of the database file
FILE_ID
NUMBER
NOT NULL
File identifier number of the database file
TABLESPACE_NAME
VARCHAR2(30)
NOT NULL
Name of the tablespace to which the file belongs
BYTES
NUMBER
Size of the file in bytes
BLOCKS
NUMBER
NOT NULL
Size of the file in Oracle blocks
STATUS
VARCHAR2(9)
File status: AVAILABLE or INVALID (INVALID means that the file number is not in use, for example, a file in a tablespace that was dropped)
RELATIVE_FNO
NUMBER
Relative file number
AUTOEXTENSIBLE
VARCHAR2(3)
Autoextensible indicator
MAXBYTES
NUMBER
Maximum file size in bytes
MAXBLOCKS
NUMBER
Maximum file size in blocks
INCREMENT_BY
NUMBER
Autoextension increment
USER_BYTES
NUMBER
Corresponding number of bytes
USER_BLOCKS
NUMBER
Number of blocks which can be used by the data
Joel Pérez
http://otn.oracle.com/experts
Maybe you are looking for
-
Help with WAP 1142n not displaying web browser?
Hi all Sorry I am new with the Cisco WAP. I have my device configured, and it has an IP, subnet, etc. I currently have it connected with serial port to my laptop and used PutTy to get into it, that's no problem. However, despite it having an IP, I ca
-
How do I prevent CS4 from crashing opon opening without having to delete Flexnet Publisher.
When I open CS4, it crashes with out an error message box coming up. The second attempt, it crashes with the message box saying, Error 150:30, Licensing for this product has stopped working. I then have to go to the hard drive > library > applicati
-
My Files(pdf documents) are stored on the fileserver , not in the table. my upload process is working fine, but how to implement the download process? i'm not sure. i want that the user clicks on a button to download the pdf document i've tried this,
-
Mooing and whining! (again)
Hi all! My MB recently started mooing and whining. It was fine before, but it recently decided to act on me. My questions are: 1. Is there a software fix for the mooing? Is there a small app that would allow me to control the on/off temperature for f
-
WAD Web Item : Custom Extension
Hi,, I have created a class for basically exporting data to excel sheet. i have created a web item custom extension and mapped the class to it through the parameters DP:included data provider details, variable details, navigation access and result se