RV110W Configure for Remote Desktop connections

I could use some help. I have a RV110W that I just got installed and I was able to get the Client working without any problem. The problem is I can't access any of the files on my system at the office. I don't see an IP address when I run "ipconfig" on my remote system showing me that I'm on the LAN at the office while coming in via the VPN client. The admin guide is of little or no help at all.
Can someone please give me some adivce?
Thanks - Howard

hs3082-att,
If you are using the QuickVPN client, no IP address will be assigned to the connecting PC. To confirm that you are in fact connected, ping the LAN IP address of the RV110W (192.168.1.1?)
If the router that you are connecting FROM has the same LAN IP address as the RV110W, you will not be able to reach anything at the office because your local router will keep the traffic local instead of sending it through the tunnel. You should change the RV110W to something like 192.168.100.1 in that case.
Sometimes the devices that you are trying to connect to will have a firewall that blocks access from any subnet other than it's own. You may have to change the firewall settings on the devices at the office. Try to ping a network printer or some other "dumb" device to see if you are connected.
- Marty

Similar Messages

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Unable to select Certificate for Remote Desktop Connection

Hi,
I have created a certificate with below parameter in inf file through a local Standalone 2008 r2 CA & imported it into Computer personal certificate store but unable to see this certificate entry while trying to select it under Remote desktop connection.
Somewhere saw we should have the private key in personal certificate store but didn't get how/where to get that key. Is that the reason, m unable to select this certificate or there is something missing in the input parameter used in inf file. Kindly suggest
what could be the problem.
[NewRequest]
Subject="CN=Server.Domain.com"
Exportable=TRUE
KeyLength=2048
KeySpec=1
KeyUsage=0xf0
MachineKeySet=TRUE
[EnhancedKeyUsageExtension]
OID=1.3.6.1.5.5.7.3.1
OID=1.3.6.1.5.5.7.3.2
OID=1.3.6.1.4.1.311.54.1.2
Regards,
Dhiraj

Hi,
Problem is resolved now. i have done below two changes.
--> used KeyUsage=0xA0 in inf file.
--> imported certificate through certreq -accept. Earlier i was importing cert from mmc.
I think second point resolved my problem. i even didn't think that mmc & command can make this difference.
Dhiraj

Forwarding port for remote desktop connection

I have been able to connect to my home machine from work using remote desktop. Because of some changes at work I am no longer able to do this on the default port (3389). So I am trying to use port 5190 (which is used for AIM) or port 5050 (Yahoo messenger). Both of these ports are enabled from work and I don't use them at home or on the computer I connect from.
When I changed the port on my home computer, which is connected to a Linksys WRT54G router, I am able to connect when I am on my home LAN using machine_nameort. But when I try my public IP addressort (which is how I would connect from work) I am not able to connect.
I have added a port in the port range forward area of my router. I have tried 5190 and 5050 and both will not allow me to connect when I am not on my LAN.
Any ideas for this?
RIKIL

Actually you don't need to press the reset button for 30 seconds...only 5.
There are two ways to reset the Router’s
factory defaults. Either press and hold the Reset
Button for approximately five seconds, or restore
the defaults from Administration > Factory
Defaults in the Router’s web-based utility.
This is what threw me, I pressed for more than 5 seconds and it wouldn't reset. I had to hold it for about 20 and that worked.

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Microsoft Remote Desktop Connection Client for Mac Not Working

I recently purchased Office 2011 for Mac. I work at home on my Mac at work on Windows 7. I also have a work laptop, running Windows 7, that comes home with me. My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines.
I CAN NOT FIGURE OUT how to get Microsoft RDC:mac to connect to my pc.
I know that the pc allows remote desktop connections because I often use RDC at work from PC to PC.
SOME PLEASE HELP! I have spent hours and hours trying to figure this out and I think it is the time capsule that is causing the problem.
My research has found that I have to use port 3389 to get this done. I am pretty computer savy but when it comes to networking I guess I have no clue. I have tried just about everything a and can't figure it out.
Thanks to anyone that can dedicate some time to configureing my time capsule to allow for RDC.

I cannot quite put together your whole network..
I work at home on my Mac at work on Windows 7. I also have a work laptop, running Windows 7, that comes home with me. My goal is to RDC my Mac to the laptop running Windows 7 to reduce desktop clutter, and easily work between machines.
So this is in local lan.. the PC laptop running win7 and the Mac loaded with RDC software. If this is local lan then the issue is nothing to do with TC.
That is only if you are trying to connect from work. to home through the router at work and TC at home. On local lan there is no blocking to ports. Are you using the local network IP of the PC Laptop?
Explain a bit further as it needs a bit more clarification.

The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Logon to the database failed.
I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
But it still does not work :-(
I keep getting same error....
Any idea what I might be missing ?

Hi,
Thank you for posting in Windows Server Forum.
Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
with standard type and check the result.
In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
Server 2012 RDS - Remote
Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
Hope it helps!
Thanks.
Dharmesh Solanki

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

Remote Desktop Connection for Mac - connection lost after a minute idle

Hi There,
I am trying to connect from a Macbook Pro to my work (XP) machine using the latest Remote Desktop Connection for Mac.
It used to work fine, and recently it has been dropping the connection if I've not been 'active' for a minute or so.
What is confusing is that it is not always like this. Some days, I can leave it inactive for hours over lunch etc, and I'll come back and it will be fine. And just the other day, in the morning it dropped me out ever minute or so I was inactive, and then the afternoon was fine, and the evening was troublsome again.
Our administrators had not changed anything during that time, nor had I changed anything on my XP machine at work, or my Mac at home.
I connect via a wireless connection.
These problems occur when running on battery and when plugged in.
Any thoughts?
Thanks,
ThreeIsles

Since RDC is not an Apple product, you should post your question on Microsoft's own forums for their Mac version of RDC:
http://www.officeformac.com/ProductForums/RemoteDesktopConnectionClient/

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M.

Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

Hiya,
What O/S versions(RDP) are you connecting to and from? Try and open the target machines event log and see what it throws when you try to connect.

REMOTE DESKTOP CONNECTION (Questions For Experts)

Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
Q2) Is it possible to use hardware like printer while in remote connection with a tab or lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you .

A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
A2- To redirect devices and resources
Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
Click Options, and then click the Local
Resources tab.
Under Local devices and resources, select the devices or resources you want to redirect.
To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
supported Plug and Play (PnP) devices.
The Plug and Play devices that support redirection and are currently plugged in appear in this list.
To redirect supported USB devices, under Local devices and resources, double-click Other
supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
Select the check box next to each device that you want to redirect.
To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
resources, double-click Drives, and then click Drives
that I plug in later.
– or –
Double-click Other supported Plug and Play (PnP) devices, and then click Devices
that I plug in later.
A3 - not possible to mountDVD drive on remote desktop.
Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

Remote Desktop Connection for Mac to Windows - logout error

Hello
I'm trying to use Remote Desktop Connection (RDC) to get from my Mac into a MacMini running Windows XP Professional. I can log into the Windows computer, but once I put in my password and click OK, it logs out of the Windows machine. Is there some sort of sharing preference or configuration that I'm missing that's making this happen?
I want to be able to use RDC to access the Windows machine and keep everything up still on the Windows machine.
Thanks

Since RDC is not an Apple product, you'll probably want to use a forum dedicated to Microsoft's Mac products such as <http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups> rather than an Apple forum
Be sure to search the forum first in case someone has already had a similar question answered.

Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

RV110W Configure for Remote Desktop connections

Similar Messages

Maybe you are looking for