RV120W [IKE] ERROR: Could not find configuration for X.X.X.X

Question

All
I setup the RV120W to allow my MAC desktops to connect in over the internet. MAC;s are running IPSecuritas or VPNTracker. Both don't work.
Setup is
Basic VPN Setup Default Values for IKE:
Gateway Policies
Client Policies
Exchange Mode:
Main
Aggressive
ID Type:
Local WAN (Internet) IP
FQDN
Local WAN (Internet) ID:
Local WAN (Internet) IP
remote.com
Remote WAN (Internet) ID:
Remote WAN (Internet) IP
local.com
Encryption Algorithm:
3DES
3DES
Authentication Algorithm:
SHA-1
SHA-1
Authentication Method:
Pre-Shared Key
Pre-Shared Key
Key-Group:
DH-Group 2 (1024 Bit)
DH-Group 2 (1024 Bit)
Lifetime:
8 Hours
8 Hours
Basic VPN Setup Default Values for VPN:
Encryption Algorithm:
3DES
Authentication Algorithm:
SHA-1
Lifetime:
1 Hours
PFS Key Group:
DH-Group 2 (1024 Bit)
NETBIOS:
Enabled (Gateway Policies)
Disabled (Client Policies)
When my clients try and login. All I see in the logs is
011-11-28 10:05:43: [rv120w][IKE] ERROR:  Could not find configuration for 212.183.140.51[65212]

Answer 1

The error that you are getting that shows in the log file by the "pings being blocked" it refers to the connection being block by the firewall or security on your computer.
Things that you should look for is: What type of internet security software you are using will a lot of the time block QVPN from working.
With Windows 7 it has a lot of added security so the windows 7 Firewall has to be on because soon as the firewall is turn off or another firewall is loaded that turns off Win7 firewall, the Win7 OS turns off IPSEC and that is needed for quick VPN to work. Hope this has been helpful and gave you some more understanding.