RV180W Firmware 1.0.2.6 bug

Our company own a RV180W router. It works well with firmware 1.0.1.9 but with firmware 1.0.2.6 it is impossible to SSH between our devices. Ping still works though.
I don't know if there is another place where to report such bugs

Hi Dominique, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. Please call the Small Business Support Center to confirm if this is a bug. Please go here to find the phone number in your country:
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful,
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

RV180W Firmware Update

I saw a post with a response stating that a new RV180W firmware would be released by end of 2013.
It was part of the RV220W posts. I can't find that post but we (community) really need a update that fixes these issues like 100% CPU, selective logging ect....
It would also be nice if features from older routers could be added.
For example, I'm missing some of the logging features from my old WVRS4400N 1.1.13. Like having a firewall rule that you can check to have it logged.!
For example:
Oct 6 05:56:29 - [Access Log Log i7] Allow TCP Packet - 10.0.1.220:52450 --> 208.68.240.20:80
OR
Oct 5 06:50:27 - [Access Log 128higher] Deny TCP Packet - 192.168.2.130:62696 --> 17.149.36.208:5223
Steve

Steven,
I also remeber seeing this post.
I think the post was in relation to the Device Emulators which have been running 1.0.3.14 since before Christmas.
The Cisco response was the the new release was expected "by the end of the month" (December 2013). Now, another month on, there is still no sign of it (although there have been updates for other routers in the RV range).
As I've discussed on here before the RV180 is a great piece of hardware- however the support updates and bug fixes have been terribly slow. It certainly prevents this being the world class product you might expect from Cisco.
Cisco,
Any updates on the next release and what it might address in terms of bug fixes and new features?
Kind Regards,
Andy.

RV180W firmware bug??

I upgraded my RV180 to 1.0.2.6 over the weekend- factory reset and then another hour or so reconfiguring.
I seem to have another issue after the upgrade. The "System", "Available LAN Hosts" option hangs when I select it. It does this both from Crome and also from Firefox- I can't try IE in Windows 8 because of other issues with IE 10 compatibility.
Anyone else seen this behaviour? Is this another bug for the long, slowly being resolved list?
I haven't had a chance to try port forwarding yet- I can't imagine what fun I'll have trying to make that work.......
Come on Cisco- nice hardware- how about sorting out this software?
Andy.

Christian,
Thanks for the feedback.
I've tested it again this morning- in my configuration it took 14 minutes to display the "Available LAN Hosts" table using firefox.
Unacceptably slow I would say.
Cisco,
Can this be raised as yet another bug for your teams to look at?
Andy.

Firmware update reduced features, increased bugs 2...

Hello, i updated my Nokia 2700c firmware last night in the hopes that it might get rid of some bugs that i found very irritating after the last forced update by the Nokia care (after a problem with the phone, instead of reinstalling the same version they updated it instead).
But the bugs have now grown in number as well as a bit more serious now.
--The phone now doesn't read the name of a contact, in the from field in sms or call list which has more than one number saved or even randomly, some numbers have it displayed, some don't.
--The media player starts playing a song after a 5sec lag in which the phone is unusable, like if i am texting at the same time, it would stop responding,
this becomes worse by the balance notifications after every sms by my operator, in which case it notifies by sounding the sms tone 2 times but now with a 5sec gap in between while playing music, thus making the fone pretty much useless for those 15secs.
--The screensaver functionality is gone.
--The main menu has a menu option repeated one more time, which i never used in the first place.
--The T9 text entry has a lot of bugs with the order of matched words.
--The transition effects have all gone slow, thus prompting me to switch them off.
I can live with the last four but the first 2 i've listed have completely turned me off. Why isn't adequate testin done before releasing an update?
The first version of the device was 7.15, which was updated to 7.80 and this latest one is v9.95(?) i guess they even typoed the version number in this one (9 instead of 7) cause it doesn't look like such a major 'upgrade'.
Please tell me is there any solution to these problems?? Or am i stuck with these bugs for good?
Thanks.

Update: Managed to fix the second issue by a hard reset.

RV180W firmware 1.0.2.6

http://software.cisco.com/download/release.html?mdfid=284005928&softwareid=282487380&release=1.0.2.6&relind=AVAILABLE&rellifecycle=&reltype=latest

After upgrading to 1.0.2.6 firmware, the Static DHCP ADD, EDIT, etc. buttons disappeared along with all associated functionality. From the "Available LAN" search, it showed that some of the originally entered DHCP clients were still listed as static while the rest reverted to dynamic. However, now there is no way to edit or add new entries.
Buttons disapearing from the UI has nothing to do with configuration settings. It seems to me that this latest 1.0.2.6 version is still BUG ridden.
WHEN CAN WE EXPECT THE NEXT RELEASE TO RESOLVE THIS ISSUE?

RV180W firmware 1.0.5.4 DHCP lease problem

Yesterday I upgraded my RV180W to firmware 1.0.5.4. Today the only machine that we have with XP can't get a DHCP lease (we have some 20 machines that can that all have W7 o W8.1). Also none of the iPhones nor Androids that connect via wifi get leases either and thus have fallen back to 3G.

Hello,
First of all I want to say that I'm sorry you are experiencing an issue with the device after the firmware upgrade.
Now, we have tested this device with the new firmware on our lab and we are not experiencing the same issue, which leads me to believe this may be an issue with your particular configuration or network topology.
We would love to have the opportunity to troubleshoot this issue on the Small Business Support Center. If you are still under support with the device, give us a call and we will be happy to assist you.
If you are not able to or are out of support, then please provide as much information as possible in regards to your current configuration as well as network topology, maybe a detailed network diagram could be helpful to so that we can have a better idea of that the issue could be.
I hope this was helpful.

5800 XM Firmware 11.0.0.8 bugs

Hello
my previous firmware didn't have any but but i've put the newer version to see if the performance is better, but now i'm disappointed actually:
1- you accelerometer response is too slow (it was faster before)
2- when I'm in the desktop main page and i'm grabbing the mobile horizontally, and when i try to open the menu, the menu screen doesn't appear correctly.
3- the worst bug is the " EXPIRED CERTIFICATE " which you really have to fix ASAP NOKIA.
4- probably other users are encountering other problems as well.
above all, you should be working harder and better because you are Nokia and we( your customers ) deserve better...
Thanks .

18-Jan-2009 06:24 PM
vahram wrote:
Hello
my previous firmware didn't have any but but i've put the newer version to see if the performance is better, but now i'm disappointed actually:
1- you accelerometer response is too slow (it was faster before)
2- when I'm in the desktop main page and i'm grabbing the mobile horizontally, and when i try to open the menu, the menu screen doesn't appear correctly.
3- the worst bug is the " EXPIRED CERTIFICATE " which you really have to fix ASAP NOKIA.
4- probably other users are encountering other problems as well.
above all, you should be working harder and better because you are Nokia and we( your customers ) deserve better...
Thanks .
There is an easy fix for the 'EXPIRED CERTIFICATE' error. The reason you get this error, as i did, is because when you upgrade the firmware, it messes with the time and date on your phone (you might recall having to set the time & date correctly again after update completion). I read somewhere that it had something to do with the sim-clock or something (dont quote me on that as i'm not 100% sure that its the sim-clock lol). But anyway, it should be an easy firmware fix which nokia will hopefully sort out very soon.
Here's how to fix the 'expired certificate' problem after updating your firmware to v11.0.08:
1) back up all your files using Nokia PC Suite ie. contacts, pictures, videos etc.(i would also remove the memory card, it might not be necssary, but better be safe )
2) Once data has been backed up....you need to reset your phone to its original factory settings by dialing *#7370# (it will ask you if you would like to restore to original factory settings, you will choose 'yes' and enter the default passcode '12345' and your phone will restart)
3) Once the phone has restarted, choose your location just like you did when you started up your phone for the very first time, and then set the correct date and time.
4) All done, and the 'expired certificate' problem should be gone and you can re-insert the memory card if you have taken it out and restore all your backed-up files back onto your device.
Let me know if this has worked for you.
Message Edited by dan2007h on 20-Jan-2009 07:25 AM

N80IE Firmware 4.0707.0.7 bugs

Can anybody please advise on when Nokia will fix the bugs already identified in N80IE firmware 4.0707.0.7? Things are no longer OK with my phone since I "upgraded" to this new firmware and most frustrating, I can no longer access my credit balance by doing something like *123# anymore.

I myself report the bug on my N80 and I hate Nokia team that luch such a disaster.Moreover, they should stop this firmware because causes many troubles to so many Nokia fans. I can not see my balance, I receive system error..Nokia wake up!! Do something!
World in zugzwang!

Latest E51 Firmware 200.34.36: minor bug found

Hello, I have found a little bug; unfortunately I don't know, if it's also on the initial firmware, but the 200.34.36 does have it.
If I have my SD card inserted (8 GB, with quite many MP3 and WMA files), it's not possible to set the system sounds, like ringing tone, mail tone and so on.
While opening the respective menu, instead of seeing of the usual sound clips list, I see only "Download sounds" and "Off".
I think, the e51 isn't able to enumerate the complete list?...
While the SD card isn't inserted, the lists work as they should.

maybe I am wrong but I can not see the similarity with your computer. when you install a new disk you install a lot more hardware than just the disk itself.
I use many professional devices that work with memory cards and they all have a maximum for which the manufacturer guarantees the device to work. If you install higher capacity cards you may expect problems. Because the devices needs to access the memory card which is a completely different process than when a computer wants to access it's hard disk.
There are even differences in different brands of cards. Some brands may produce a 8 GB card that works with a certain device others produce a card that does not work. When you upgrade your firmware and you get a problem as soon as you insert your card, it is very likely that the card is the issue.
I would suggest to try a 4 GB card and see if the problem persists. If not you know the answer. You can alternatively try different brands of 8 GB cards.

Download and Install RV180W Firmware Upgrade

I received a warning when I accessed the router site which indicated;
"Your connection is not private
Attackers might be trying to steal your information from 192.168.50.1 (for example, passwords, messages, or credit cards)."
I have downloaded the firmware upgrade. However, when I execute the file, it executes a command to burn file to my DVD drive.
When allow the command to proceed, window returns the following;
"The selected disc image file isn't valid."
Any suggestions on how to proceed with upgrading the firmware.

Hi,
Please follow the procedure mentioned below to proceed with upgrading the firmware
Upgrading Firmware
Cisco RV180/RV180W Administration Guide
Upgrading Firmware
CAUTION During a firmware upgrade, do not try to go online, turn off the device, shut down
the PC, or interrupt the process in any way until the operation is complete. This
process takes about a minute, including the reboot process. Interrupting the
upgrade process at specific points when the flash is being written to may corrupt
the flash memory and render the router unusable.
You can upgrade to a newer firmware version from the Administration > Firmware
Upgrade page. To upgrade:
STEP 1 Click Browse, locate and select the downloaded firmware, and click Upload.
STEP 2 (Optional) Check the box to reset all configuration and settings to the default
values. Do not check this box if you want to keep any settings you have changed
on the router!
STEP 3 Click Start Firmware Upgrade. After the new firmware image is validated, the new
image is written to flash, and the router is automatically rebooted with the new
firmware. Choose Status > System Summary to make sure the router installed the
new firmware version.
And then to reboot it
To reboot the router, choose Administration > Reboot Router. Click Reboot.
Regards
Aateek Singh
Network Engineer
Spooster IT Services

UTA200-TM Firmware 1.01.08 timestamp bug

I am using T-Mobile @home service. I was given an UTA200-TM HiPort Adapter.
Firmware 1.01.08 has a major timestamp bug.
Status: Current Time: Not Available
I tried flashing fimware 1.01.04.
Status: Current Time: Came up with correct date and time.
Firmware 1.01.04 timestamp works perfectly.
However, the UTA200-TM reflashes itself to 1.01.08. How aggravating!

Tech Support:
The UTA200-TM hardware is not the problem.
The problem is that there is a major flaw in the time-stamp under firmware version 1.01.08:
“Status-Router-Current Time: Not Available”.
Under firmware version 1.01.04:
“Status-Router-Current Time: Correct Date and Time”.
Further testing:
Kbhonline did some troubleshooting and he figured out the flaw even deeper.
When you assign a static address to the WAN port, the time service, for some reason does not operate.
Just for fun he set the UTA200-TM to act as a DHCP client, rebooted and, voila, it all came up, including the time.
He then started to make my changes, one change at a time and reboot.
When he changed the WAN setting from DHCP to Static, no time request went outbound.
All other services worked fine, just no correct time.

Router RV180W: Firmware crash

Hi
I have a problem with my new RV180W, the firmware crashes after at few days.
The wireless SSID shows up, but connection fails.
The administration the web interface is not responding (wired interface).
Only a power down/up can resolve the problem. (for at few days).
I have tried all 3 availble firmware versions, with equal results.
I can replicate the fault quickly if there is much traffic on wireless LAN
My setup is:
WAN: Default with hardcoded ip-adress (No DHCP), NAT
Wireless: 20/40 MHz Channel 2, WPA2-PSK
Router DHCP server: Disable.
A number of Port mappings.
LAN: Intern adress of router is set to 192.168.100.254 Mask: 255.255.255.0
Most other settings is default.
Sincerely,
Jens C J Ballegaard

Hi jens, my name is Luis I am part of the Small business Support community. I apologize for all this situation you are having, this kind of issues could be related to performance issues, MTU size, CPU overload.
Well, I will advise you to keep your firmware 1.0.2.6, also you could try changing the MTU size using from 1450 to 1500 you can test some different sizes.
Let me know if those steps fixed your issue.
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.

RV180W firmware 1.0.2.6 UC 100%

Hi,
i've installed the new firmware on my router and now the UC is showing 100% all the time
I've tried to factory reset it, it's doing the same thing
If I downgrade to previous firmware, it goes back to normal
I've only 1 PC in my network (test lab), so no big traffic here.
is it a bug ?

Good morning
Hi Tommy, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. Can you please reach out to our Small Business Support Center and open a Service Request to address this issue to confirm if this is a bug? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it*
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

100% CPU usage. RV180W Firmware Version 1.0.2.6

Since I updated to Firmware Version 1.0.2.6 cpu usage shows 100% with no sing of lowering.
So since 2 days now its always runngin at full speeds for no reason.
Firmware Update, Factory Reset, Setup as before. => 100% CPU
Is this a common problem? Is there any fix for that? Or at least a way to get informations what causes this?
Kind reagards
bartlingja

Hi, we can try something, please download the firmware thru this link, and install it again, then configure just the necessary configuration. If the issue continues, could you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

WAP4410N firmware 2.0.4.2 bug: 300Mbps data rate not possible

I've spent parts of the past five days buying and exchanging several WAP4410N units because I was not able to achieve anything close to a 300Mbps data rate. I also tried various wireless-n network cards which were known to be configured correctly for 300Mbps speeds with no luck.
The highest speed I was able to achieve was 130Mbps, which is an indication that channel bonding is not in effect.
Then I came across another post in the forums:
WAP4410N does not exceed 130Mbps in N mode at close range.
where the OP mentions recently upgrading to firmware 2.0.4.2, though not treating that as the cause of his problems.
On a lark, I tried downgrading to both firmware 2.0.2.1 and firmware 2.0.3.3, and to my surprise, I was able to achieve the full 300Mbps data rate with both firmware versions.
When I reverted back to 2.0.4.2, I was not able to achieve the full 300Mbps data rate.
So, right now, I downgraded to firmware 2.0.3.3 so I can get the higher data rate, though there are other quirks to deal with.
Furthermore, when I do a web search of reviews, I can see that the inability to achieve the 300Mbps data rate is a huge source of complaints.
Cisco, please fix this firmware!
Edited to add: I found another post regarding the same phenomenon:
WAP4410n LIMITED TO 130Mbs in N-mode

Hi James,
When I bought the WAP4410N I was still using Vista and a beta of Windows 7 x64. My PC was reporting 300Mbps but I never believed it and just figured this was better then the Linksys Wap54g with DD-WRT. I was only showing 54Mbps on my laptops but the amount of data I could download over a minute was better then the WAP4410N. The best speed I can achieve (but only lasts a few minutes) is 130Mbps from the WAP4410N and downloads are painfully slow. Using a desktop gadget "network meter" on one of my desktop PCs with a wireless N USB adapter it is showing a speed of 54Mbps and a signal strength of 70% at a distance of 4 feet from the WAP4410N. At this distance I also experience interruptions in connection and poor performance. I do not know if my WAP4410N is defective but a beta firmware is to be released this month that is supposed to help. I have had to recommend other brands in this price range to those wishing to buy a stable product as this performance is not acceptable. My network is mostly GigaLan devices and strangely the intelligent switch reports the WAP4410N as running at 100Mbps with the firmware set the 1000Mbps so there is another mystery.
Best regards,
Brad

RV180W Firmware 1.0.2.6 bug

Similar Messages

Maybe you are looking for