RV215W inbound rules with control ip - cannot open port 25

I have the exact same router, exact same firmware and the this exact same problem. I cannot open port 25 and specify a range of IP addresses. This is simply not working. What do we have to do to get this to work correctly? When I port forward the SMTP service it allows all IP's and works fine. When i try to use an Access Rule, it does not work. Can someone from CISCO help please? Thanks,

It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! ••ßThat would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues! I told him I would have appreciated if Cisco would have debugged the issues with their router BEFOR they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.

Similar Messages

RV215W inbound rules with control ip

Hello,
I have a Cisco RV215W and i want to create inbound rule (wan -> lan) with ip control.
I ha created in "service management" a new service (rsync on 873 start port and and port)
After i had created a new access rules :
Action : Always Allow
Service : Rsync ( a service created in service management)
Status : enable
Connection type : inbound (Wan -> Lan)
source ip : single ip with outdoor serveur
Destination ip : ip to NAS
When i connected on outdoor server, i used telnet :
telnet my_public_ip 873 and i cannot connect my NAS
when i create a rule in "single port forwarding", my outdoor server can access on my NAS (but all outdoor customer can access on my NAS....)
Do you have an idea?
thank a lot per advance

Hi Bruno, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. You could create an ACL to allow the specific address to the NAS and deny the rest.
Bellow I will share a Link with a document regarding ACL,
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=3707
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=3707I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Cannot open ports!

Hello,
I thought I should come here as a last resort so here I go...
I have been using a WRT54G for quite some time, I find it does the job smoothly and quickly...
However, I cannot open ports (or at least a specific one)...
I am looking to host a game server on the port '43594'. I went though the router settings and "Applications and Gaming" and enabled the port...
However 'canyouseeme.org' says:
Error: I could not see your service on 58.178.203.117 on port (43594)
Reason: Connection timed out
Any leads as to why this is? It's a small Java game by the way, so not a major server. Could it actually be my modem? (which is not a linksys so I wont ask)..
Could it be my ISP? iPrimus?
Sorry if I can't explain well...
If you need more information, just tell me what your looking for.
- Morsolo

Try updating your firmware then reset the defualt settings and reconfiguring it. If all fails set your PC as the DMZ if you have to. It sounds like you are doing everything you need to. I have hosted a few on-line dedicated game servers using this basic configuration.
Richard Aichner (Ikester)

My firefox on my lap top (with windows 7) cannot open a website with a username and password, without first clearing the history ? my other computer has windows xp and it works fine.

My firefox on my lap top (with windows 7) cannot login to my e mail website with a username and password, without first clearing the history ? my other computer has windows xp and it works fine.

I simply reinstalled fire fox 3.6.19 and I can login no problem. Seems like it could be a compatability problem between 5.0 and windows 7. One other thing that happened often was lag while playing mmorpg games. Not sure if this fixed it or not, but I can update this thread when i find out.
Thank you to who ever provided the link to the older fire fox downloads page in another question thread.

Cannot open ports on Sonicwall TZ 215

Use the wizard for a public facing server. It will create the address objects and ports you specify as well as the associated rules.

I have been battling with a new sonicwall tz 215 for 3 days now trying to simply get a port open to allow web traffic through. I have tried every tutorial, watched every youtube video, used the wizards all to no avail. I am switching out a cisco rv042 for this device. It is currently configured and works so I know that the internal machine and the ISP are allowing the proper actions to occur. When I look at the log it says Web Request Dropped. I have also used various port checkers and no matter what I can't get a single port to show open.I have restored the Sonicwall back to factory multiple times and started the process over from scratch just to make sure I don't have any rules or whatever that would prevent ports from being opened. Has anyone battled with a sonicwall device before and possibly have any other tips / suggestions? Is...
This topic first appeared in the Spiceworks Community

InDesign CC | Error with indd file - "Cannot open the file...Adobe InDesign may not support file format"

I encountered a very strange error with InDesign CC after saving a file created in CS4. I'd attach the file but I'm not sure how to do this, if I'm able to. The file is 44kb and doesn't seem like it should be (file I saved had a large book cover). Now since the original CS4 file was overwritten using InDesign CC, the file is corrupt and I'm getting the error message displayed below. The file is not open within another application. Has anyone gotten this before?

Thanks for your response Peter. Below is the gibber contained in the first four lines. In the first line, where it reads "mimetypeapplication" and then "indesign-idml-package", I would assume that this should've been a valid idml file.
PK *meEËv‰+ + mimetypeapplication/vnd.adobe.indesign-idml-packagePK *meE!t/k {< designmap.xmlÝ[ýrÚH ÿ;y •ê.µ[uk 6¶IÀ)À áb þÈÞÖÖÖ 0e1£ IŽÙ¿ò wUw/—'¹îÑ× cc;gv«²FÝ==¿îéîé CýýíÌ5n¨ô™à ³¼U2 Êmá0>i˜ çÇ?í›† î WpÚ0çÔ7ß ¼®¿'Ì ÆÜ Z s >9Â g” ¦!)q¨¼L ï¢â1%A(é ³RÝ3 O '´á©\Ú*ý°WúÑ4P÷a¬Å lÜËœþ5€™ ÷Ö²¸¿E 1¢[¶˜YMüÔá‡Ôg n1gæZ`‚å ûšLÀ Ó8ìuS 8‹i ©; ¤ð! r~Ê|˜?¤ # ×Œ°\ÂÿöwŒ°62R)ú‚q( 0´i ì†ž’9•0f´k íîÏ ûRŒ úábk¸e\Ñ‘Ñ $ ŽñÃðª×ÿÑ¸©˜Æà¤•Šùð`tŽÚ»åÚîîO•2@ .sÚÂ ²Ã Šó]øT=ƒ³ 0Ä‡ÉÇ •-—r\›b±C:&¡ tfdB‹¥ ÌiÏ f_RŸÊ z4 QÇ¡NŒÓ‹¥Úb6bœ àÈÞ8 ÒäÎŒi{6¿FçØ¡ »O›¡' ¿aŽ‰ëSóàõ«ú)á“ ÅÎO ¿t #>q™?

Uninstalling Photoshop CS4 from a Mac with Yosemite, which cannot open CS4.

I have Photoshop CS4 installed on a Mac. I recently upgraded to Yosemite and now am not able to open it. The Java OS that is recommended to solve the problem refuses to download. Thus I would like uninstall Photoshop CS4 but cannot do so. Please help from your end. It is my MacBook Pro 13". I DO NOT want to uninstall it from my MacBook Pro 17". Only from my 13" Can you help me?

Ok. That should be fine. There is a CS/CC Cleaner tool as well. It removes installation records according to the description.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Gene

MacPro 2009 with Mountain Lion cannot open DVD tray:help?

Feel mighty stupid but cannot find a way to open DVD?CD tray on a 2009 MacPro.
Can anyone help a btain dead oldtime Apple customer? I need help and feel as confused as I found Berlin without Checkpoint Charlie better but no geographical signs to help me navigate. Help only refers to slot drives but not to old MacPro hardware.
I have not used an optical disk in a long, long time and a firend needs some design work and she only has files on a DVD.

Are you using the Apple keyboard?
If so, have you pressed the eject button?
If using a PC keyboard, try pressing the F12 key.

HELP I created a newsletter from Pages - sent it out - those with PC's cannot open. What do I do?

I'm new to all this MAC system. I created a newsletter on Pages, sent it out and now getting emails saying no one can open it. DId I save it wrong? What to do? Thanks Rick

You probably left it as a Pages document, which is only readable on Macs. Export as Word or (much better) PDF using the File - Export menu.
Matt

I get the error "Cannot open port" when I want to display the directory content of one FTP servers with LabVIEW's internet toolkit functions. What is the problem? I'm logged on on the server.

Is anyone experimenting this kind of problems or has resolved it? Thanks. I use LabVIEW 6.1 with Windows 98.

Squish,
This forum is for CAN questions. I would strongly urge you to repost your question to the LabVIEW General category and this is a LabVIEW question.
Also, does the FTP Browser shipping example that comes with the Internet Toolkit work? If it does, then I would suggest studying that example. If it does not, then I would suggest reposting your question and giving much more detail about which VI is giving you the error and a general overview of the program.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Adobe flash not working with Firefox 5 - cannot open previous files

Since I have updated to Firefox 5, my flash player does not open certain cites. I get the message that it needs an upgrade plug in. I did it and it still is a problem.
This did not happen before I upgraded to 5. HELP!

Problem solve!
I just re-install the flashplayer plugin using the firefox popup ( the button on top )
and it works!

Why doesnt java work with firefox,i cannot open certain sites

ive been trying to go online auction and it will not bring up the auction

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers. 
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console". 
* http://wiki.mozilla.org/Security:Renegotiation
See:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

Cannot open port through Airport Extreme to access security system DVR

I have internet access through Bellsouth DSL -- modem only. We had a security system set up around a DVR recording images and connected to the internet through a Linksys router. We would use a client on outside computers to connect to the security system dvr and see what was happening (live or recorded). I switched out the Linksys for the Airport Extreme, and now we cannot connect to the DVR.
Do I need to manually open a port to the DVR? How do I do this? The DVR connects to the Airport Extreme via Ethernet, and as far as I can tell, the Airport Extreme connects to the DSL modem via Ethernet using DHCP. We have a static IP address. I thank you in advance for any answers, and I apologize if I'm not giving enough information.

Let's double-check your Port Mapping setup on the 802.11n AirPort Extreme Base Station (AEBSn) ...
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: 10.0.1.4
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 6746
o Public TCP Port(s): 6746
o Private IP Address: 10.0.1.4
o Private UDP Port(s): 6746
o Private TCP Port(s): 6746
o Click "Continue"

Telnet - cannot open port 23, connect failed

I'm having problems with Telent and Window 7. Telnet works, however on one piece of OLD legacy computer UNIX system, it fails. I experienced this same problem on Windows XP, but there was a registry fix for it. This same fix does not work on Windows 7.
The unix system does use port 23....anyone have a solution?
Below was the registry fix that fix this problem on Windows XP.
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"SackOpts"=dword:00000
"Tcp1323Opts"=dword:00000

Hi Milos...
(edited...added more information at the bottom). I have encluded some parameters off the unix machine.
Thanks for helping me out.
I tried PUTTY... I configured the Telnet for every possible combinations and the at didn't work either.
When you say the CurrentControlSet1 is not effective...can you please give me more details.
As I mentioned in my original POST....I had this same problem with windows xp....but the registry fix shown allowed Telnet to work. I don't know why its not working in Windows 7. I was reading that Windows 7 has Auto Windowing and I'm working if perhaps
the negoation isn't taking place. This is an old unix platform and I'll have to check to see if there is any monitoring applications...but off hand I can't think of any.
TANGO># netstat -a
Active connections (including servers)
Proto Sock# Chan#   Local Address      Foreign Address    (state)
tcp        1      0 *.*                *.*
Listening
tcp        2      1 *.*                *.*
Listening
tcp        3      2 *.*                *.*
Listening
tcp        4      3 *.*                *.*
Listening
tcp        5      4 *.*                *.*
Listening
tcp        8     47 208.246.0..telnet 33.149.0.0.2032   Bound
udp        6     55 *.talk             *.*               Bound
udp        7     56 *.ntalk            *.*               Bound
TANGO>#
TANGO># netstat -all
transmissions        0x00164bcc 1461196
mult xmit retries    0x000000be      190
sngl xmit retries    0x00000080      128
failed retries       0x00000000        0
deferrals            0x00000226      550
xmit buf err         0x00000000        0
silo underrun        0x00000000        0
late collisions      0x00000000        0
lost carrier         0x00000000        0
babble               0x00000000        0
telnet> display
will flush output when sending interrupt characters.
won't send interrupt characters in urgent mode.
won't map carriage return on output.
won't recognize certain control characters.
won't turn on socket level debugging.
won't print hexadecimal representation of network traffic.
won't show option processing.
[^E]    echo.
[^]]    escape.
[^H]    erase.
[^C]    interrupt.
[^U]    kill.
[^\]    quit.
[^D]    eof.
telnet>

Cannot open attachments with my firefox. my wife can with IE

with firefox I cannot open attachments in my emails. I have been forwarding these emails to my wife's email. She is using internet explorer by yahoo through AT&t and then I have no trouble opening them on her email.

hello jrhjmh, are you a yahoo mail user and does it work when you access yahoo mail through this link?: https://mail.yahoo.com/
reference: https://support.mozilla.org/en-US/questions/971042
I'm not sure as to what exactly is going on, but it looks like yahoo has changed something on their side that makes certain old urls/servers dysfunctional (you may be currently using those because you've bookmarked them before or through your history) - at least quite a number of other users have reported that...
 so using the generic address https://mail.yahoo.com/ as a bookmark should lead you to the current & working url.

RV215W inbound rules with control ip - cannot open port 25

Similar Messages

Maybe you are looking for