Rv220w blocking my cameras on wifi

hello,
I have 2 ssid signals setup at my workplace.
the 2nd one is for all guests and it's isolated from the lan+trusted(1st one) with a vlan feature.
the 1st one is for all trusted devices over wifi. the wifi channel is setup to allow mac addresses of the two asante security cameras. the cameras upload videos to an ftp on my server. the two will connect to the router at first, I can ping them or see them in 'my network'. give it a little time and they disappear.
then I have to power off/on the router or the cameras to make them work for a few minutes. the process repeats.
the cameras make lots of connections to the ftp server. I'm suspecting they're flooding the router and it blocks them.
occasionaly they will come back for a minute or two and disappear again as if blocked/unblocked.
I added their mac addresses in hopes of making them 'trusted' devices.
I've tried them on both ssids.
I checked and unchecked firewall/security checks and icsa settings.
all other devices I tried, multiple phones and laptops work without problems on both ssids and they don't get blocked.
what else can I do?
thanks for any help.
Jack

This is a "feature" of the RV220. I face this problem from time to time. In may case, the router starts blocking my server connected to LAN port (wireless clients cannot access Windows network shares) and the only reliable soulution I found is to restart the router...
This problem never got really solved for me (what a shame, it is a business router) so I put my server to another location.
But you have several options to make things a little better...
please read this:
https://supportforums.cisco.com/message/3467016
1. disable DNS proxy
and/or
2. disable Firewall -> Attack Prevention -> Block UDP Flood or some of the other "ICSA Settings"

Similar Messages

  • How to use Camera and Wifi in G580

    Hi,
    I have bought a new lenovo laptop g580, i5, Os WIndow 7 32bit
    The problem is i have install all the driver but haven't find any option to start camera and wifi
    Please guide me how to do that 

    Hi sunilgupta91 and welcome to the community,
    Here's your user manual .  Page 23 shows the commands for turning on the wireless, (Fn +F5) and the camera, (Fn +Esc).
    Normally, Psxsage would be right in turning the wireless on with a dedicated switch, but I don't see one for your machine.  I don't see a dedicated camera program listed in your driver list so he would also be right in saying that you need a program, (like Skype) to use the camera.  
    There are free camera programs out there, I'll find you one.
    Edit:  Here's one that other users have recommended:  yawcam
    Here's one with effects:  manycam
    Dave 
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Is there a way to permanently block a specific open wifi network?

    Is there a way to permanently block a specific open wifi network?

    Well, the only workaround is if you get along with your neighbors and they're understanding of what you want to accomplish, not to mention they should password protect their wifi access as well.  This of course depends on the density of your surrounding neighborhood. 
    Start with checking the WiFi strength from your phone in their room.  If you're getting 4 solid bars it's likely your next door neighbor, and of course weaker would be farther (Help narrow your search a little).  Neighbors should password their router anyways since most providers I know put a cap on the amount of data on the plan (I think Comcast is something like 200 Gigs....I know that's a bit and I hardly come close to the mark, but if everyone around me was using my wireless that would all add up quickly).  Hope this helps.

  • Router (RV120W) and It isn't letting me connect to the cameras through wifi.

    I install the new router (RV120W) and It isn't letting me connect to the cameras through wifi or inside the local network, either with local ip or public ip, no matter which device I use, pc or my phone. I can access to the cameras from outsite, if I disable the wifi in my phone, I can see the cameras using the 4G network typing my public ip.
    Any suggestion that helps me to troubleshooting.
    Thanks

    Thank you Luis for your Quick response.
    as you said I disable the host firewall, but the issue was still happening. so what i did was reconfigure the router again from scrach and it worked..
    now what I'm experiencing is that same router model allow me open the cameras interface through the web, but from WAN it says "Authentication Failed" and inside the WLAN allow me to authenticate with the same credentials.. the only thing different is the brand of the cameras DVR .
    any suggestion..
    Thanks once again.

  • After ois 7 upgrade i can no longer connect my camera via wifi to upload photos to my iphone, nor ipad

    I have a Canon camera that has wifi.  Before the OIS 7 upgrade, I could upoad phots from my camera to either the iphone, or ipad wirelessly.  Since the upgrade, i cannot.  Anyone found a soluti on.  I have tried resetting the settings on the camera to original, renaming the camera name to remove the apostrophe. 

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • How I can use my galaxy II only for camera and wifi while I am traveling out of states without any extra charge?

    How I can use my galaxy II only for camera and  while I am traveling out of states without any extra charge?

    i think you can put the device in airplane mode then selectively turn on wifi...
    before you travel you could try this and check your cellular usage on the settings ! mobile data display. you might be able to turn mobile data / cellular radio off that way as well.

  • Is it possible to post pix from camera with WiFi connection, but no comp? (travelling light!)

    I just set up my wireless services on my camera. I will be travelling out of the country and will not have my laptop with me, but will have WiFi access. Is it still possible to post pictures wirelessly to online platfroms such as Facebook?

    struong,
    A computer is required as far as setting up Web Services and registering them to your camera.  However, once that is done, you can send image directly to those services as long as your camera is connected to an access point that has internet access.  To do this:
    Access the Wi-Fi menu on the camera.
    Select a registered Web Service, like Facebook or Twitter.
    Connect to an access point.
    Once connected, the image transfer screen will be displayed.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Code look for camera, 3G, Wifi, Bluetooth possible?

    We like to use our ipads in the school. This works already very well. Sharing documents, presentation, ebooks ...
    We also like to use our ipads at the exams.
    The school will alow this as far we can guarantee that there are no images takes and no communication inside or outside the room (3G, Wifi, Bluetooth).
    Is there any way (or app) who can stop the camera and the communication.
    My idea is that at the start of the exams the teacher can deactivate camera and communication and look it with a code.
    Very similar to the limitation apple allready can give with code look, but unfortunataly only for camera and bluetooth.
    The ipads are all private and not school ipads.
    Thanks for your help

    Hi Kubab,
    Yes there is a way to lock the above mentioned things.
    You even don't need an App for that.
    You simply go to:
    Settings > General > Restriction
    In the restriction settings you can enable/disable apps or everything else on your iOS.
    The teacher then could give it a code that you cannot change the settings he/she made.
    This should help!
    Regards,
    Michael

  • Connect printer with lumix zs-30 camera via wifi

    Does anyone know how to link a lumix zs-30 camera to an hp envy 100 WiFi enabled printer? I have tried calling both hp and lumix product support without a solution. Any ideas? The WiFi on the camera works with other devices and the WiFi on the printer works with my Mac.

    Replacing your wireless router try here.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    A Priner USB cable is less than 5 bucks.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • What can be happening to block the downloads via wifi or 3G?

    my Ipad2 is unable to download apps or updates via wifi or 3G? it looks like there is something is blocking this functionality

    thanks for your answer,
    when i choose an app in applestore, sometimes it stays with the waiting message, looks like there is another app downloading, but there isn´t.
    the only thing diferent is 3 downloads of podcasts in applestore with errors, and i cannot clear them, this could be it? how can i clear the transfer with errors?
    best regards

  • Connecting a camera va wifi

    I have an airport express and am having trouble with the wifi connection from my Canon camera to the computer

    Read and follow the directions in your camera's User Guide manual.
    Specific answer depends on your specific camera model.
    Alternatively, you might find a video demo for your model on the web.
    Here's an example for the EOS 70D DSLR Camera's Wi-Fi: http://youtu.be/CuaslGmfxiY
    Message was edited by: EZ Jim
    Mac OSX 10.9.5

  • Yoga 11s any attempt to use camera causes wifi to lose signal

    when ever i attempt to use th integrated webcam, I lose wifi signal.  I have installed all of the driver upgrades and it still does not resolve the issue.  The only way to restore wifi signal is to reboot.  Any ideas/suggestions?

    Hi jeffSmol,
    Thanks for posting and welcome to the community. Was reading through your thread and was wondering if you try the suggestion from our Hints & tips page from the link below.
    http://support.lenovo.com/en_MY/research/hints-or-tips/detail.page?DocID=HT070623
    Do let me know how it goes.
    Regards

  • Photosmart c7180 blocked from my jetpack wifi.

    I have one of those Verizon Jetpacks which allows up to 10 devices to connect to the internet.  One day when I was the only one online (or so I thought), I noticed that three devices were connected. I did not recognize them and thought that a stranger had breached my password and was using my internet. Since, I have limited data to use online, I disconnected the two "rogue" devices.  Now the Jetpack will not let my printer reconnect to the internet. I have talked to Verizon and they reset the Jetpack, which allowed my tablet to get online, but the HP Photosmart C7180 still will not connect. Does anyone know how to allow it to reconnect? I know it should be an option in the Jetpack, but we cannot find it. So, my question is: can I do anything to my printer that will give it a fresh new ID and allow it to connect again?

        Hi nsiebert,
    I am sorry to hear about the issues with your Mi-fi device. Let me help! Which exact model device do you have? Have you tried power cycling it to see if it refresh your connections? Share more details so the helpful members of our community would also need to offer a suggestion of assistance.
    Thank you!
    EdW_VZW    
    Follow us on twitter @VZWSupport

  • I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

    I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7.  The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
    Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I clicked on the 'block' tab that came up under a video, and the video is gone. How do I get it to come back?

    The little button that lets you block adds came up at the corner of a video I was watching, and I clicked on it by accident. Now all videos from that website are gone. How do I get them to not be blocked?

    If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then check the settings for that site.

Maybe you are looking for

  • My movie is too large... what do I do?

    Right now I am building a movie for my friends of our summer together. We basically did everything together, so I had a massive amount of media I wanted to put in the movie. Now that I'm almost complete with the movie, I can see that it's going to be

  • Vendor without using

    Hi, Is there a report that displays the vendors without using the last year? Regards.

  • Upload of an authorization group at caracteritic level

    Gurus, Am preparing an LSMW to upload caracteristics for which i want to assign a specific authorization group. Though i can't see the authorization group corresponding field "CABN-ATAUTH" in any of the standard structures (BGR00, BISMT, BIMZW) assoc

  • How to intercept system calls in JVM?

    Hi, everyone. I am looking for a way to intercept system calls in JVM, a way do something like ptrace does in Linux. Because I wanna log all function calls a specified application made, and I may modify the arguments and the return value. And then i

  • Process of inbound idoc

    Hi, can any one pls let me know the steps we should fallow in an inbound idoc processing. I have the  messagte type , basic type, process code and i have to create partner profile , pls let me know what are the steps to be fallowed thanks, Deepak