RV220W - Content filtering not working (?)

Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
f.e.:
http://facebook.com (content filtered)
https://facebook.com (content NOT filtered)...
What the hell ! where I'm wrong ?
Does anyone is experiencing the same ?

Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
I do not want be polemical, but I do not understand where I went wrong.
Before I buy I looked @
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
Check it out.
Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

Similar Messages

  • Re: content filters not available

    Branched from content filters not available
    AdaS (or anyone else @ VZW) --
    So... Here we are again. It is now a year since the issue was originally raised on here.
    Why does Verizon not want to develop content filters for customers on their 4G network with 4G LTE phones?? What are consumers not being told?
    The 3G content filter was developed by Verizon to allow the user filtering controls on the Verizon network. We want Verizon to replicate what it did for their 3G network and do the same when our 4G phones access their 4G network. What's the big deal??
    Please stop the running-in-circles-game. Don't keep sending us to the various manufacturers. That is not where the answer is. Why is this issue not important enough for Verizon to have addressed it by now?
    I apologize if I may be coming across as less than pleasant, but why does this have to be so frustrating??
    Message was edited by: Admin Moderator

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • Content filters not available

    I want to turn on the content filters for a Samsung Galaxy S4, but get the message:
    The cell phone associated with this number is not compatible with the
    Content Filters service. If this is a 4G LTE device please check back at
    a later date as we are currently working to make these devices compatible.
    Go to Support/Device to see if a software update is available for your device.
    Does anybody know when they will be available on the S4?

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • Web Content Source - Not Working

    Created a new web-content source & full crawled it.
    When i searched with content text, not working.

    Hi ,
    According to your description, my understanding is that it did not work when you searched a new web site content source in SharePoint 2013.
    Please check whether the web site allows anonymous access to its content. If not, we need to configure a rule for the URL which allows us to enter the credential to access the content of site
    More information, please refer to the link:
    http://mohitvash.wordpress.com/2012/03/07/configure-external-site-as-content-sources-in-sharepoint-search/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • When Export ssrs Report to CSV file runtime filters not working

    The Runtime Filters not working when Export SSRS Report to CSV format

    Hi PatilPriti,
    As for my understanding, the filter worked fine when you preview the report,
    but it did not work when you export the report to CSV format. I tried to export the report to CSV file on my side, and the data was shown as expected. I guess the issue is due to the parameter or filter. please try to export to Excel format to test again
    and make sure you created the filter correctly. Please refer to the following
    blog about how to add a filter in SSRS:
    http://arcanecode.com/2010/07/12/adding-filter-parameters-to-sql-server-2008-reporting-services-reports/
    If the problem is not resolved, i would appreciate it if you could give us
    detailed description of your problem.
    It’s better to provide the table structure and some sample data, it will help us move more quickly toward a solution.
    Thanks, 
    Wendy Fu

  • Content filter not working

    I recently got my two teenagers a Droid Maxx and they love it. My question is if anyone knows why the content filter option doesn't work for it. You would think the content filter would work on all phones. Seems to me that prior to releasing any new phone they should have made sure all features of the Verizon account would work. Does anyone know if they are going to resolve this issue and if so when??  I do think it is irresponsible for the feature to not work considering the number of kids using cell phones now. How can a parent who wants to control content do so if not available. I think this should be a priority with Verizon. Do they value kids safety or not?

        Hey there, skyhawk1! Thanks for your purchase of two new Droid Maxx smartphones. I hope your teenagers are loving them! I'm very curious about the crux of your post here. You've expressed interest in Content Filtering, and stated that the service is incompatible with the Droid Maxx. Our records indicate that the model will support filtering. Can you tell me why you feel that it doesn't? Did you attempt to add or request it, only to be denied? Please share the details. Thanks!
    For more info on Content Filtering, please review this link: http://vz.to/17xz67N
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • RV220W - Content Filtering and Tivo

    After using an RV220W in the Office fdr some time I decided to upgrade my old WRVS4400N V1 with one - in line with Cisco recommendations. I am using the latest firmware 1.0.4.17.
    One problem I have is that a Tivo device will not connect to its contect servers in the outside world when any Content Filtering is active. I have tried setting up a firewall rule to give complete outbound access for the device for all services but that did not help. The only thing that allows the Tivo to connect properly is to either turn off Content filtering completely  - in which case some of the router protection is lost, or to select some other port in the HTTP port selection box (I tried port 79) - in which case content protection functionality on port 80 is also lost. I have also tried turning off (deselecting) all the other content filtering options but the device can still cannot connect if Content Filtering is enabled.
    It seems to me that setting a firewall rule to allow ALL outbound from the device should be enough to allow connection. What is Content Filtering doing that prevents this device from connecting? And why can't I override it with the firewall rules? This seems to be the same as an old thread many releases of firmware ago:   RV220W - Connecting to TiVo mothership w/ ProtectLink
    Why is this the only router that seems to have this problem? Will it cause other issues?
    If this is because of some internal behaviour of the ruleset then Content Filtering needs to be able to be excluded for a "trusted" internal IP address.
    thanks,
    David Wyatt

    Hello,
    I've opened case # 621056469. The support engineer told me that he'll try to reproduce the problem on his side, and contact me back for remote testing on my own router. If the issue is already known, does it have some kind of ref number so that I can inform him ? Is a fix already planned for  a future firmware release ?
    Thanks for your help.

  • Rv220w- content filtering ignoring firewall rules

    Hello,
    I face a strange bahavior with my rv220w router : I set up access rules to deny all outbound trafic for a particular IP range. It seems to work fine .... but when I enable content filtering, HTTP  access on port 80 works again (and other ports are denied). It seems that activating content filtering makes the router ignore firewall rule. Bug ? Or did I miss someting ?
    Thanks in advance for your help.

    Hello,
    I've opened case # 621056469. The support engineer told me that he'll try to reproduce the problem on his side, and contact me back for remote testing on my own router. If the issue is already known, does it have some kind of ref number so that I can inform him ? Is a fix already planned for  a future firmware release ?
    Thanks for your help.

  • Web Part with Flash Content is not working in IE only

    Hi All, 
       I have created on Visual WebPart its contain a flash embed object i am trying load this flash component inside the Iframe.
    unfortunatly its not working in IE 11 version but its working fine with other browser like Mozila and Chorme.
    I referred the other links like but its not helped me to solve this issue. i have tried without iframe alos its not working if its a standalone web page out side the shrepoint working fine.
    https://social.technet.microsoft.com/Forums/office/en-US/c88466ba-bd00-4cd3-a7cf-3a9a7eee7f51/flash-content-not-working-in-ie-11?forum=ieitprocurrentver
    Thanks 
    SUJIL KUMAR T
    Software developer

    Hi,
    As the custom web part works well in other browsers, the issue may be related to the IE itself.
    Have you tried the methods below?
    Use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    Add the site into Trusted sites to check whether it works.
    Open the IE->Internet Options->Security->Trusted Sites->add the site into the zone
    What’s more, you can also switch the Document mode to IE 10 or lower to check whether it works.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Display Content is Not working in BI 7.4

    Hi All,
    In BW 7.4, I am trying to display content via Mange Infoprovider. Till 7.3 the data used to show in the BW system itself.
    Where as in 7.4 BW system display data redirecting to below URL and it’s calling a webdynpro APP called “rsdmdm_md_maintenance_app” as below URL
    http://host:port/sap/bc/webdynpro/sap/rsdmdm_md_maintenance_app?IOBJNM=ZDV_EMPID&sap-language=EN.
    Bu this URL giving 500 Internet server error.
    Can any one help with what I am missing here? In 7.4 is it possible to display content in BW system itself?
    Thanks in advance.
    Venky

    Hi,
    Please review following SAP Note. The new behavior (WebDynpro based Master Data maintenance) is now standard since SAP BW 7.4 SP05. Old SAPGui based screen is not possible anymore.
    The notes describes the SICF services you need to activate to make it work.
    My understanding is that old SAPGui based screen could not handle certain newer data types. As per SAP the new feature has some good benefits such as copy/paster multiple lines from spreadsheet.
    1997402 - Master data maintenance is not possible in old GUI based
    one
    1969105 - Master data maintenance for InfoObjects does not
    start
    517484
    - Inactive services in the Internet Communication Framework
    1969092 - Exception when launching master data maintenance for some
    InfoObjects; additional option for navigating to application log
    Hope this helps.
    btw: I only found out this week hard way as we just did SAP BW 7.4 upgrade. :-)
    Thank you with kind regards,
    Satya,
    Resolution
    It’s not possible to switch to old GUI Based Master data maintenance. Incase
    if new master data maintenance is not working please check:
    Check if services as described in note 517484 is active
    In transaction SICF activate services starting with RSDMDM*
    Check if note 1969092 is implemented already.
    See Also
    Additionally the new UI has some advantages like editing values directly
    within the tables, so it’s not required to edit the values one by one,  or the
    option to copy and paste values from a spreadsheet directly in to table.

  • Some filters not working in photoshop cs2

    The bas relief, charcoal, graphic pen, halftone pattern, photocopy, plaster, reticulation, stamp and torn edges filters are not working working for me for some reason.
    I checked the image mode and it is set to 8 bit RGB like it is supposed to be, but for some reason it just makes the images Black and does nothing else.
    Here is a example.
    I put in a normal jpeg image just like this one.
    But when I put try and put one of those filter's on it the image comes out like this.
    The image just turns plain black. Ive tried restarting photoshop but it doesn't fix the problem

    Try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Bridge on Mac deleting/rejecting/filtering not working!?! HELP

    Ok seems as if I am having a problem only windows users have run into in earlier versions of CS.  I was using CS5 on my PC and for many reasons I had to dump the dead weight of the PC world and move to a Mac... FINALLY! But that also ment purchasing a new CS5 for Mac.  I thought this would be flawless... CS5 to CS5. WRONG. I store my photos on a 2TB external, same one i used on my PC. Now, I can not do any sort of "editing" of image info like "delete, "reject", "star" or anyother rating within bridge. It does not work with key commandes or from the menu.  After researching this issue for two days it seems as if this issuse has been reserved for PC users and earlier versions being upgraded to newer ones.  This is not the case for me.  They said to "use as Administrator" I am the adminsitrator, and have made sure the permisissions have been set to read and write. That has not made a difference.  Others have said that there seems to be no solution. Things they have tried include:
    ~Uninstall/reinstall of CS
    ~administrator settings
    ~setting it to open automatically at start up
    ~deleting pictures and reloading them through the new software version (this also seems to be an issue reserved for photos that have already been uploaded, I do not know if this will change with new images loaded through the new version as I have not had a chance to try it, since I'm trying to resolve this first)
    I need to have access to my previously loaded files and this is a huge hiccup!
    PS I can open the files to Photoshop, and edit, and the changes seem to stick, its just any organization, deleting, staring etc actually in bridge DONT stick. another issue that the PC users seem to have is error messages and pop-up windows when tring to exicute these tasks. I have no error messages.
    PLEASE HELP! thx

    I am read only on both of my externals! when i tried to find a way to set permissions, it says that I should be able to find a "lock" once I have gone to "get info" there is no "lock" so that I may enter my password and change permissions.
    First thing that comes to my mind is that you have used the same external disks as you did for Windows. And that you did not reformatted them for a Mac using MacOS Extended (Journaled) formatting.
    Without knowing your situation I assume you have a back up disk with the same content as your problem disk. If not it might be wise to buy a new back Up disk. There is one thing sure about disks, they all have an end date, some sooner most later but they all die and often at a moment you did not expect it nor could use it...
    Make sure you have a proper back up and the reformat the disk (or the new disk) using Mac Disk Utillity
    Personally I always use the safety option to overwrite the disk once with Zeros but that takes a bit longer.
    Give it a proper name and use the default format as mentioned above. Copy the content back to the new formatted disk and try again
    If in doubt try another older disk or buy a cheap one for testing if this method is working for you.

  • Filters not working correctly

    We have the strange situation, that filters in calendar views are not working correctly (anymore?).
    If i set up a filter to search for my name as attendee, teaming still shows all entries instead of only just mine. This behavior applies to customized and standard calendar views.
    Filters for (customized) file folders still work as expected.
    Any ideas?

    jasi,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Filtering not working for newly added child objects in master-detail table

    Hi,
    I am using Jdeveloper 11.1.1.4 version.
    Problem scenario:
    Filtering of records is not working for newly created child objects in a master-detail scenario.
    Steps to reproduce this issue using HR Schema (using LOCATIONS and DEPARTMENTS table ) :
    1. Create Business components (EO's & VO's ) for LOCATIONS & DEPARTMENTS table)
    1. Create a .jspx page and insert a readonly master table of Locations
    2. Insert a child table (inline-edit table) of Departments and enable filtering
    4. For the child table, drag and drop CreateInsert operation as a toolbar button .
    5. Create a new child record using the toolbar button and enter data .
    6. Filtering on the newly created child record's attributes does not work.
    Please note that the same filter works for existing child records.
    Any suggestions for resolving this issue?
    Thanks,
    Vikas

    Found from Fusion Developer's Guide the following snippet about QBE functionality :
    "+When you create data controls, all data collections will automatically include a Named Criteria node with an All Queriable Attributes criteria. This is the default view criteria that includes all the searchable attributes or columns of the data collection. You cannot edit or modify this view criteria+. "
    So, the question is if the implicit view criteria cannot be edited, how else to set the query execution mode to "Both" ?
    Shouldn't ADF BC support this by default? Is this a bug?
    Note:- If you create a maste-detail table using POJO datacontrols, filter works correctly for newly created child records also .
    This seems to be an issue with ADF-BC datacontrols only.
    Thanks,
    Vikas

  • Enable/Disable Library Filters not working properly

    I am running LR 3.4.1 on OS X 10.6.8.  The Library>Enable Filters command does not work properly when I have a Library Filter set up to  filter on more than on criterion. For example, I have a Library Filter preset called "Needs Location  Keywords" that selects all images for which don't have "Location" as one  of their keywords and which are not flagged as Rejected.  In other  words, there are two filter criteria applied: 1) TEXT: Keywords "Don't Contain" "Location"
    2) ATTRIBUTE: Flag = Flagged OR Flag = Unflagged Toggling the Filter State by choosing Library>Enable Filters works as  desired when the Filter State is changed to OFF; all images in the  selected folder are displayed.  However, when Library>Enable Filters is selected a second time, changing the Filter State back to ON, only  one of the original filter criteria is applied, namely: 1) TEXT: Keywords "Don't Contain" "Location" However,  ATTRIBUTE Filtering is NOT re-enabled as one would expect. 
    This is repeatable with different filter settings and different folders.
    Is this behavior unique to my system or are other seeing the same thing?
    Thanks,
    Michael

    It is a known problem, but certainly not widely-known. The filter columns don't work properly on custom fields when the field is text and when the entered value consists of more than one word. IIRC they work if the possible values are listed in the plug-in's field definition, or with "enum" fields.
    Smart collections do work as expected with text custom fields.
    John

Maybe you are looking for