RV220W - DHCPv6 Prefix Delegation - Edit the configuration file?

I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
I then downloaded its configuration file and saw the following:
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"
dhcpv6c[1]["statelessMode"] = "1"
dhcpv6c[1]["prefixDelegation"] = "0"
dhcpv6c[1]["preferredAddress"] = ""
dhcpv6c[1]["LogicalIfName"] = "WAN1"
dhcpv6c[1]["requestPreferredAddress"] = "0"
dhcpv6c[1]["requestDNSSearchList"] = "0"
dhcpv6c[1]["requestPreferredPrefix"] = "0"
dhcpv6c[1]["preferredAddressPrefixLength"] = "0"
dhcpv6c[1]["requestDNS"] = "1"
dhcpv6c[1]["sendRapidCommit"] = "0"
dhcpv6c[1]["isEnabled"] = "1"
dhcpv6c[1]["preferredPrefix"] = ""
dhcpv6c[1]["_ROWID_"] = "1"
dhcpv6c[1]["preferredPrefixPrefixLength"] = "0"
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? Does anyone know how can I manually edit this flag and update the router's configuration?

I can't help you because our ISP doesn't support native ipv6.  I suggest you call Cisco Small Business technical support.  All you need is your serial number and your Cisco username to get support.  Tori is awesome to work with.

Similar Messages

  • Modifying the configuration files in OBIEE 11g

    Hi
    We are facing an error when we tried to to add "<DashboardMaxBeforeMenu>" tag in the instanceconfig.xml manually and restart the presentation services of OBIEE 11g .
    I had come across few suggestions that, configuration files in OBIEE 11g cannot be modified manually. I am doubtful on these suggestions . So please, let me know for sure wether we can modify the configuration files in OBIEE 11g manually or not.
    It will be very helpful if the process to modify the configuration files in OBIEE 11g is shared with us.
    Thanks.

    Hi,
    I could not tell you whether the; <DashboardMaxBeforeMenu>10</DashboardMaxBeforeMenu> still works in 11g.
    What I do know is that you could manually edit the configuration files. The only thing is when you modify this file via the Enterprise Manager, your customizations get lost. You have to manually add them again.
    Cheers,
    Daan Bakboord
    http://obibb.wordpress.com

  • CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

  • Cannot find the configuration file in classpath

    Cannot find the configuration file /oracle/apps/prc/po/....applicationModule/common/bc4j.xcfg in the classpath.
    Hi!
    I'm trying to run the following code:
    String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
    String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
    ApplicationModule applicationModule = (ApplicationModule)Configuration.createRootApplicationModule(appModule, cfg);
    I get this error message:
    Exception in thread "main" oracle.jbo.ConfigException: JBO-33001: Cannot find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
         at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
         at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
         at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
         at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)
    I have checked and the config file does exist in the correct directory, and I can see it in my Application Module - Configurations. Any idea why this is happening? Am I supposed to configure something specifically for this or add it in my classpath? If so, how am I supposed to do it?
    Thanks
    Mansi
    Edited by: Mansi G on Oct 6, 2008 11:56 AM

    Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
    And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
    Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
    Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

  • Problems saving values in the configuration file

    Hello,
    I'm upgrading one of my projects from VS2005 (with .NET 2.0) to VS2013 (with .NET 4.5). I have a setup project in my solution, but this is no longer supported and I have to change to InstallShield
    deployment project. With the old setup project my app runs fine, but now with InstallShield I have a problem. I install the application in this folder: C:\Program Files (x86)\CompanyName\AppName. I use .config file to read and write some parameters.
    Reading parameters goes well, but when I write new values in the .config file a get one error. When I used the old setup project, at writing time the system created new .config file in C:\Users\me\AppData\Local\VirtualStore\Program Files (x86)\CompanyName\AppName
    (this is named isolated storage, isn't it? :S).
    These are all changes I made in the solution:
    When I opened the solution with VS 2013 the migration process went well (some warnings and messages) except setup project (of course).
    I upgrade all projects to .NET Framework 4.5 (Project properties -> Application -> Target framework).
    I have intalled InstallShielld Limited Edition and added and configured the new deployment project.
    I think that these are all changes. And this is the source code where I get the exception:
    public void SetXParamValue(string value)
    try
    Configuration conf = ConfigurationManager.OpenExeConfiguration(Application.ExecutablePath);
    conf.AppSettings.Settings["XParam"].Value = value;
    conf.Save();
    catch (Exception e)
    MessageBox.Show("Error setting X param.");
    And this is the exception:
    Exception messsage:
    An error occurred loading a configuration file: Access to the path 'C:\Program Files (x86)\CompanyName\AppName\oy25i1se.tmp' is denied. (C:\Program Files (x86)\CompanyName\AppName\ExeFile 1.0.192b.exe.config)
    Stack trace:
    at System.Configuration.MgmtConfigurationRecord.SaveAs(String filename, ConfigurationSaveMode saveMode, Boolean forceUpdateAll)
    at System.Configuration.Configuration.SaveAsImpl(String filename, ConfigurationSaveMode saveMode, Boolean forceSaveAll)
    at System.Configuration.Configuration.Save()
    at VisualizadorCabecera.FormPrincipal.EstablecerIdioma(CultureInfo idioma)
    Inner exception messsage:
    Access to the path 'C:\Program Files (x86)\CompanyName\AppName\oy25i1se.tmp' is denied.
    Stack trace:
    at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
    at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean
    checkHost)
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
    at System.CodeDom.Compiler.TempFileCollection.EnsureTempNameCreated()
    at System.CodeDom.Compiler.TempFileCollection.AddExtension(String fileExtension, Boolean keepFile)
    at System.CodeDom.Compiler.TempFileCollection.AddExtension(String fileExtension)
    at System.Configuration.Internal.WriteFileContext..ctor(String filename, String templateFilename)
    at System.Configuration.Internal.InternalConfigHost.StaticOpenStreamForWrite(String streamName, String templateStreamName, Object& writeContext, Boolean assertPermissions)
    at System.Configuration.Internal.InternalConfigHost.System.Configuration.Internal.IInternalConfigHost.OpenStreamForWrite(String streamName, String templateStreamName, Object& writeContext, Boolean assertPermissions)
    at System.Configuration.Internal.InternalConfigHost.System.Configuration.Internal.IInternalConfigHost.OpenStreamForWrite(String streamName, String templateStreamName, Object& writeContext)
    at System.Configuration.ClientConfigurationHost.OpenStreamForWrite(String streamName, String templateStreamName, Object& writeContext)
    at System.Configuration.UpdateConfigHost.OpenStreamForWrite(String streamName, String templateStreamName, Object& writeContext)
    at System.Configuration.MgmtConfigurationRecord.SaveAs(String filename, ConfigurationSaveMode saveMode, Boolean forceUpdateAll)
    Any suggestions? I have to configure something else?
    Thank you,
    Jon.

    > "With the old setup project my app runs fine"
    Actually, I disagree.  Your configuration file is sitting alongside your application, in a directory that
    should be protected from changes by "regular" users and it's
    only running because Windows is intercepting your attempt to write under C:\Program Files* and rerouting those attempts to a "Virtual Store" location.  By the sounds of it, something your new installer is doing is [quite rightly]
    stopping this from happening (IIRC, virtualisation can be turned off for a program and, IMHO,
    should be).  
    You need to move the configuration file to a location that the user can write to (somewhere under C:\Users\username), even if you have to copy it the very first time it's needed. 
    Regards, Phill W.

  • What causes JBO-33001: Cannot find the configuration file /common/bc4j.xcfg

    I know that the jbo exception message:
    JBO-33001: Cannot find the configuration file /common/bc4j.xcfg
    can be caused by several things including the file really not being there. But in my current case, I know it is there and can be found throgh the classpath, because I actually find it using Configuration.buildConfigurationFileNameFromClassPath and
    Configuration.getConfiguration just before calling Configuration.createRootApplicationModule. Is there any way to turn on a diagnostic to find out what is really wrong?
    I would also like to request an enhancement to give meaningful messages in the jbo exception.
    Roger

    This is on jdev 903 with patch running a local application attempting to connect to standalone OC4J 903. I think the error occurs before there is ever any attempt to make the connection to OC4J. Having one big catch-all exception for everything that can go wrong in creating the AM is pretty poor. I know in the past I have done manual editing of bc4j.xcfg and XML sentax errors cause exactly the same exception as not having the file at all. That is why I would at least like a list of all the causes behind the exception so I can go through and check them all.
    Thanks,
    Roger

  • BUG: JBO-33001: Cannot find the configuration file bc4j.xcfg

    Hi,
    I get the exception JBO-33001: Cannot find the configuration file com\trivadis\adf\demos\login\model\common\bc4j.xcfg in the classpath
    after I have edited the file outside of JDev9052. Why? Because I followed the instructions of the help document "Modifying the JClient Login Dialog for JDBC". To get the JCLoginDialog you have to remove some lines in the bc4j.xcfg file.
    I have deleted the classes directory, rebuild the complete workspace, but I still get the exception.
    Any comments?
    Thanks,
    Markus
    Complete stacktrace:
    oracle.jbo.JboException: JBO-33001: Cannot find the configuration file com\trivadis\adf\demos\login\model\common\bc4j.xcfg in the classpath
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:369)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)
    ## Detail 0 ##
    oracle.jbo.JboException: JBO-33000: Cannot find the configuration file registerConnectionsFromDocument
         at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1052)
         at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:264)
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:352)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)
    ## Detail 0 ##
    java.lang.NullPointerException
         at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1026)
         at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:264)
         at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:352)
         at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272)
         at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:135)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:220)
         at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:97)
         at oracle.jbo.uicli.mom.JUMetaObjectManager.loadCpx(JUMetaObjectManager.java:612)
         at com.trivadis.adf.demos.login.view.FormDeptView1.main(FormDeptView1.java:325)

    Repost.
    The original post date was Sep 05 2004, not Aug 17 2001. :-)

  • Failed to load the configuration file for the workflow

    Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
    in working condition and it works pretty right.
    But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one  I used SPD and all the time
    Im using the same pc.
    Any ideas will be appreciated.
    Cheers, R2C3 ----------------------------------- starting sharepoint :)

    HI
    Maybe you have permission problem or there is invalid xoml murkup.
    To verify this from SharePoint Designer use the following steps.
    In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
    1.Next select the plus sign of the workflow in question to expand it
    2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
    3.Right-click on the page, and then select Verify well-formed XML
    4.Correct any errors and save the file
    5.Reopen the workflow to test
    Also double check that you are using SPD with the same credentials you created workflow
    Hope this will help.
    Regards,
    Marcin

  • Safe way to edit system configuration files?

    What is a safe way to edit a system configuration file? I mean I did this twice: I edited rc.conf, rebooted and the system failed to boot. Then I had to edit out the typos with a LiveCD.
    Is there like a visudo (that edits /etc/sudoers) for rc.conf, xorg.conf, fstab and so on?
    Thanks!

    Majorix wrote:
    No I am of course editing those files with sudo. But the problem is, gedit won't check the file for possible errors, thus if you too oversee it and try to reboot using those system files, you will fail.
    visudo checks you while you edit, so if you make an error it will warn you in the end.
    I was asking if there was a similar tool for the rest of the configuration files.
    Sorry for not being clear.
    Oh -- a kind of a babysitter, you mean?
    j/k, i screw up config files all the time.
    No, as far as I know there is nothing like that for most files. some do have functionality like that, like I think lilo warns you when you write to lilo.conf and the file has errors. and you can run something like testparm for the smb.conf file, and I think there something similar to check apache config files, etc. but for the standard system config files or arch-specific files like rc.conf, fstab, etc. I don't think there is anything. you just have to be sure not to make any mistakes!

  • Does Airport Extreme 802.11ac support DHCPv6 prefix delegation

    I have IPv6 working with my Airport Extreme 802.11ac. I'm experimenting (for fun) with IPv6 on my local network, and I was trying to create another IPv6 subnet using DHCPv6 prefix delegation.
    Comcast (my ISP) is indeed delegating a 64-bit prefix to the Airport Extreme, but the Airport Extreme does not seem capable of sub-delegating that 64-bit prefix (into say 2 65-bit prefixes, or 4 66-bit prefixes, etc).
    Is the Aiport Extreme 802.11ac is capable of sub-delegating IPv6 prefixes like this?

    I have the exact same problem with my ISP (Init7) here in Switzerland. They delegating IPv6 adresses via DHCPv6-PD (Prefix Delegation) and my Apple AirPort Extreme just get only an IPv4 address.
    Since the worldwide use of IPv6 is rising steadily, I really hope Apple will wake up and update the firmware of its AirPort devices to support DHCPv6-PD.

  • Imac is no longer able to open the Configuration file

    Hi ,
    I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
    The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
    My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
    I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
    I tried using the Airport Setup assistant (imac), I received this message:
    "Appropriate Airport hardware was bot found on this computer,if you recently
    Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
    The imac does not have a card, nor do i think it needs one.
    I would like to be able to at least open the configuration file.
    Thank you for reading my post.
    Eme
    Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.4)  

    Hi Kes, a star for the company !
    I made an error on my first post I have a Netopia modem, Airport router.
    And so it remains, i guess that there must be an easy answer somewhere
    that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
    As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
    particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
    Good luck,w/ this Q.
    regards Eme
    Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger   Mac OS X (10.4.5)  

  • No dsn is present in the configuration file in the reporting services 2008

    HI i have found this error in the log file of my reporting services ,
    when i comes to the Configuration file in that
    my DSN path is empty no input code is there in that DSN tags
    <DSN>
    <DSN/>
    it shows the empty tags,
    and my Current Report Server Report Credentials are Windows,Service account credentails
    will it take the problem or what
    We have repair the BIDS setup also still not able to solve my issue.
    once this is  resolved now able to send the emails using subscriptions.
    pls infom abut this , i have sufferd this problem last 20 days.
    Please update the above query with high priority
    TanQ

    Hi Ychinnari,
    According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
    DSN specify the database server that hosts the report server database connection string.  The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
    existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
    Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
    On the Database page, click Change Database.
    We can create a new report server database or select an existing database, then click Next.
    Connect to the instance of the Database Engine that you will use to create and host the report server database.
    Specify properties used to create the database.
    Specify the credentials used by the report server to connect to the report server database.
    Review the information on the Summary page to verify the settings are correct, and then click Next.
    Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
    For detail information about Configure a Report Server Database Connection, please refer to the following document:
    https://msdn.microsoft.com/en-us/library/ms159133.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • The configuration file did not contain well formed AppV configuration XML - When using Office 2013 ODT package

    All,
    I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
    configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
    error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
    tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
    As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
    http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
    when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
    This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
    to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
    trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
    groups for different applications, just as I'm trying here with Office 2013.
    Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
    and publish all applications within a package to a user regardless of whether they are in the correct group or not?
    The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
    Thanks

    Nicke,
    The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
    No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
    http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
    2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
    I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
    on the machine when delivered?
    <Configuration>
      <Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
        <Product ID="ProPlusVolume">
          <Language ID="en-us" />
    <ExcludeApp ID="Access" />
    <ExcludeApp ID="InfoPath" />
        </Product>
      </Add>
    </Configuration>
    3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
    through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
    I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
    http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
    rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
    Dan,
    Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
     From what I’ve read / watched  I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
    them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
    (I think).
    The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
    users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
    However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
    suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
    to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
    Is my understanding above correct or have I missed some options / methods?
    If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
    this use case is the AppV method one which will be unsuitable?
    Thanks

  • To open & Edit the XLS file in edit mode after Extracting SAP data into it

    Hello Experts,
      I have a requirement to open and edit the xls file imidiately after downlaoding the SAP data into this XLS file. The XLS file is getting saved on presentation server (e.g. Destop/C: drive).
      I have used function module "GUI_DOWNLOAD" OR "DOWNLAOD" to download the data from SAP table to XLS file. But now I need this XLS file to be get opned automatically after finishing the Download, so that user can make changes into XLS file and can save the changes into it. After saving I have to upload this modified Data into SAP table again.
    For this I am really not aware how to get it done..but I believe you experts will definately help me out..waiting for your reply.
    Thanks,

    HI,
    did you ur problem was solved if not check this code once.
    now only i tried it my system , it opens xl file and save all data in it.
    DATA: ZKNA1 LIKE STANDARD TABLE OF KNA1 WITH HEADER LINE.
    SELECT * FROM KNA1 INTO TABLE ZKNA1.
    CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
      EXPORTING
        FILE_NAME                       = 'C:\Documents and Settings\rajesh.NACL\Desktop\XLSSDSDS.XLS'
      CREATE_PIVOT                    = 0
      DATA_SHEET_NAME                 = ' '
      PIVOT_SHEET_NAME                = ' '
      PASSWORD                        = ' '
      PASSWORD_OPTION                 = 0
    TABLES
      PIVOT_FIELD_TAB                 =
       DATA_TAB                        = ZKNA1[]
      FIELDNAMES                      =
    EXCEPTIONS
      FILE_NOT_EXIST                  = 1
      FILENAME_EXPECTED               = 2
      COMMUNICATION_ERROR             = 3
      OLE_OBJECT_METHOD_ERROR         = 4
      OLE_OBJECT_PROPERTY_ERROR       = 5
      INVALID_PIVOT_FIELDS            = 6
      DOWNLOAD_PROBLEM                = 7
      OTHERS                          = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    thanq,
    rajesh.k

  • Error while updating the configuration files (MOB20003)

    hi,
    After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

    Hi Somesh,
    If i am not wrong, only a war file deployment is needed to make ipad work.
    This happens with URL hitting directly on the Server.
    If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
    Regards,
    Atul

Maybe you are looking for

  • Nano Connection Problem (1st Gen)

    Hey, everything was going well, then suddenly my iPod nano was no longer recognized by my computer. It is not recognized by iTunes or Windows. When I plug it into my computer USB, nothing happens. It doesnt even start to charge. I have to plug it int

  • Gong nuts trying to replace a hard drive on an early 2008 IMAC

    Hi All, I'll try to be brief.  I thought we were having hard drive issues, because if we tried to reboot once warm we just get the folder with the flashing ?  SOmetimes the computer would go days before it was kind enough to reboot. I managed to keep

  • How to replace an html br tag in the field to a carriage return?

    Hi All, I have a requirement to replace the <<br>> tag in the text field with a carriage return character " Currently the data in the Comments field looks like : "20100627 -115541 SECURITY WILL MEET AT MAIN ENTERANCE"<<<br>>"20100627 -115605 Officer

  • Vertical & Horizontal Submenus Do Not Appear in IE 7

    Both the vertical and horizontal submenus of my Spry menu bars do not appear on hover, although other parent menu items (without submenus) do highlight on hover. The menus work fine in Safari and Firefox. I appreciate any assistance anyone can provid

  • CASH FLOW REPORT FROM FUNDS MANAGEMENT

    Hi All   I am in the mid of BW implementation for FI and FM reports. As part of this i have to create CASH FLOW report.. Currently the user using a SAP report from , Funds Management, FMEM which points to the structure IFMEISB , Cash Budget Managemen