RV220W reports the remote gateway is not responding.

Hi, I've just set-up one of the RV220W VPN solutions.
This worked fine for a while, but now it reports the remote gateway is not responding.
Other clients can connect, but not the computer I'm using at home.
Logfile reports:
2011/08/31 21:10:31 [STATUS]Success to connect.
2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:10:31 [STATUS]Verifying Network...
2011/08/31 21:10:37 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:40 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:43 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:46 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:10:49 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:11:01 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:11:03 [STATUS]Disconnecting...
2011/08/31 21:11:07 [STATUS]Success to disconnect.
2011/08/31 21:15:07 [STATUS]OS Version: Windows 7
2011/08/31 21:15:07 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]Windows Firewall Private Profile Settings: ON
2011/08/31 21:15:07 [STATUS]One network interface detected with IP address 192.168.2.2
2011/08/31 21:15:07 [STATUS]Connecting...
2011/08/31 21:15:07 [DEBUG]Input VPN Server Address = 81.167.1.1
2011/08/31 21:15:07 [STATUS]Connecting to remote gateway with IP address: 81.167.1.1
2011/08/31 21:15:07 [WARNING]Server's certificate doesn't exist on your local computer.
2011/08/31 21:15:09 [STATUS]Remote gateway was reached by https ...
2011/08/31 21:15:09 [STATUS]Provisioning...
2011/08/31 21:15:17 [STATUS]Success to connect.
2011/08/31 21:15:17 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:15:17 [STATUS]Verifying Network...
2011/08/31 21:15:22 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:25 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:28 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:31 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:34 [WARNING]Failed to ping remote VPN Router!
2011/08/31 21:15:46 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2011/08/31 21:16:49 [STATUS]Disconnecting...
2011/08/31 21:16:53 [STATUS]Success to disconnect.
I've tried the most common stuff.
Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too.
Checked that IKE and IPSec services are running.
I've also tried both with windows firewall ON and OFF.
A collegue of mine had the same problem in the same timeframe as me, but after a while - he suddently was able to connect.
I still can't!!
Firmware Version:        1.0.2.4
Anyone got a fix for this?
Edit: IP is not real.

Ok, so I had a chat with Cisco - and it seems like the setup on the RV220W was done correctly and was working fine.
Showed me a few things that could come in handy checking out when running diag on the quickvpn.
I disabled all antivirus realtime checks, opened 443 and 500 inbound to my computer - checked that the QuickVPN.exe had an exception in the windows firewall, and that the firewall was enabled.
Also checked that the services was set tu Auto and Started.
Rebooted computer, and I was able to connect!
Now I'm working my way back to the setup I had, to figure out what went wrong in the first place.

Similar Messages

RVO42G VPN Error - The Remote Gateway is Not Responding. Do you want to wait?

I have followed the instructions @
https://supportforums.cisco.com/docs/DOC-29399, but continue to receive the error message The remote gateway is not responding. Do you want to wait?
According to the RV042G, it shows the connection was made and the status is set to "online" for the user, but choosing to wait does not connect and the error returns eventually requiring you to select "no" to waiting.
Thanks for your help.
Clinton

Thanks for reaching out Abhishek.
I am trying to setup a Client to Gateway VPN so I can utilize the 50 available tunnels. I have setup a Group VPN with user accounts associated with it. I have installed the Cisco QuickVPN client on Windows 7 and Windows 8 clients and have attempted to login. I have followed the instructions that Cisco posted @ https://supportforums.cisco.com/docs/DOC-29399, but cannot connect a remote client successfully. I recieve the error:
The remote gateway is not responding. Do you want to wait?
Looking at the VPN log on the RV042G, I see:
Jun 26 11:27:45 2013    VPN Log (qknips0): deleting connection
Jun 26 11:26:51 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
Jun 26 11:26:51 2013    VPN Log forgetting secrets
Jun 26 11:26:51 2013    VPN Log listening for IKE messages
Jun 26 11:26:51 2013    VPN Log added connection description (qknips0)
Jun 26 11:25:41 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
Jun 26 11:25:41 2013    VPN Log forgetting secrets
Jun 26 11:25:41 2013    VPN Log listening for IKE messages
Jun 26 11:25:41 2013    VPN Log added connection description (grpips0)
Jun 26 11:25:41 2013    VPN Log (grpips0): deleting connection
I don't know what else to do to get the QuickVPN client working so I can take advantage of the VPN service and 50 tunnels.
Thanks.

Remote gateway is not responding error message

When I try to connect through Quick VPN installed on PC with XP SP3, it shows "remote gateway is not responding".
I am using following setting
router configuration:
=========================
#1. Basic Setup, set MTU to manual and to 1492.
#2. In the Firewall - General Tab , DoS Prevention must be disabled, and everything else unchecked.
#3. VPV - VPN Client access, enter user name and password.
#4. VPN - VPN Passthrough - All Enabled.
#5. VPN - IPSec VPN -did not touch and here are the enteries:
section VPN Tunnel:
vpn tunnel: disabled
name: blank
NAT-Traversal: disabled
Local secure group:
type: IP adress
IP address: 192.168.1.0
Mask: 255.255.255.255
Remote secure group:
type: IP adress
IP address: 0.0.0.0
Mask: 255.255.255.255
Remote secure Gateway:
type: IP adress
IP address: 0.0.0.0
Key Management:
did not change anything either
Here is the VPN log on the router:
041 [Sat 21:18:40] listening for IKE messages
042 [Sat 21:18:40] forgetting secrets
043 [Sat 21:18:40] loading secrets from "/etc/ipsec.secrets"
Home side I am using Dlink router DI-624 and IPs are 192.168.0.1 and IPsec on the router is enabled.
On office side IP is 192.168.1.1 with linksys WRV200 router.
Please let me know what changes should I do on the router etc.? Thanks for your help.
Message Edited by JD001 on 09-15-2008 08:38 PM

All of them are running with Win XP SP2 at work. NAT-Traversal: is Disabled. DMZ is enabled. Thanks

We've encountered the following issues: The remote server is not responding in a proper manner

I have never downloaded Adobe Creative Cloud/Suite/Photoshop basically anything for myself before and have just bought the Creative suite (£15.88/month) and am trying to install it to my computer (Windows 8). I have downloaded the Creative Cloud Set-Up but am unable to get any further than this. When I click on the download, it looks like it is going to download (Adobe Installer, Downloading Creative Cloud desktop and a loading bar) but then it tells me it has encountered the following issues: The remote server is not responding in a proper manner.
Now, I have been looking online for a solution and I saw something about changing an OOBE file in Program Files x86>Common Files>Adobe and at first there was no OOBE file so after more looking I thought I might have to download the Adobe Application Manager, which I did, but that doesn't work either, it just says unable to Reach Adobe servers, check internet connectivity (don't think there is anything wrong with this, I've not had any ther problems with internet connectivity) and firewall settings (i disabled the firewalls).
So I really have no idea what to do, the forums and help sites are confusing and none of the suggestions appear to work?!
Please help!
Thanks in advance!

HI Jneilon,
Try folowing the kb article : Error "Remote server is not responding" | Install and confirm if its working fine or not .
If you are behind a corporate network with network restrictions ? If yes, You might want to connect with your IT department and request them to white list the entries for Adobe as mentioned in the article : Creative Cloud Help | About Creative Cloud Packager
Site/Port information used by Creative Cloud Packager
The following host/port combinations may need to be whitelisted when logging in with an Adobe ID to download, install, and package applications using the Creative Cloud Packager.
Address
Ports
ccmdls.adobe.com
443
ims-na1.adobelogin.com
80
443
ims-prod06.adobelogin.com
443
na1r.services.adobe.com
80
443
prod-rel-ffc-ccm.oobesaas.adobe.com
443
prod-rel-ffc.oobesaas.adobe.com
443
lm.licenses.adobe.com
80
443
ccmdl.adobe.com
80
swupmf.adobe.com
80
swupdl.adobe.com
80
Cheers,
Kartikay Sharma

The remote server did not respond to a connection attempt

I have two Exchange 2003 servers: Old and New. Emails from the new server can go out however, users on the new server cannot receive emails from the old or the internet.
I get the following error:'....remote server did not respond to a connection attempt....'
All emails are stuck in newserver.domain.com.
KimaniBob

Hi KimaniBob,
Since Exchange 2003 is a very old Exchange version, we have not supported for Exchange 2003. It is recommended to upgrade your Exchange server to Exchange 2010. Your understanding will be appreciated.
Best regards,
Amy Wang
TechNet Community Support

The remote server is not responding in a proper manner

Error message when trying to update to Photoshop CC

Hi Robbie3521,
You might want to refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html

Error message 'The remote server is not responding in a proper manner. Please retry after a few min

We have high security at the company so I'm wondering if there is an issue with the firewall settings not letting adobe in. The progress bar when trying to run CreativeCloudSet-Up.exe only gets to about ten percent of the way before this error appears.
I've tried the help desk chat and was asked to change the folder name C:\Program Files (x86)\Common Files\Adobe\OOBE to C:\Program Files (x86)\Common Files\Adobe\OOBEOLD - this had no effect. I acctually get a registration error now when opening my CS6 apps. Anyone know how to fix this?
Thanks

Anything is possible in a corporate network environemnt, but without exact info nobody can know. as a start, refer to this:
Sign in or activation errors
Mylenium

The Remote gatway is not responding

Have tryed connecting thru VPN to an AS400 computer system. Two other people are connecting to AS400 with no problem. ATT suggested changing my IP address because the owner of the AS400 was assigned the same IP address. We have been trying for a few weeks to get this to work. We have had several conversations (3-Way) with ATT to no avail. Had one guy tell us to disable NORTON ANTIVIRUS software and try. Does you have any idea how I cann connect? HELP! Software system is VISTA (both systems). Using LINKSYS QUICK VPN.

What is the model number of your Linksys device? Please include the hardware version plus the firmware version. I believe that the Linksys Quick VPn only works with a Linksys VPN router.

Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

Hi
I am trying to setup a Power BI On Premise datasource at a client site.
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears.
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’
The servername which is returned in the error message is exactly the name which the DMG was installed on.
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.

HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus

Firewall: Error sending to the socket, server is not responding.

Hi all,
I'm trying to connect AIX machine to NT DB2 Database through JDBC with a firewall. I'm using the standard port 6789 in JDBC Applet Server in NT DB2. But I've gotten the following message:
COM.ibm.db2.jdbc.DB2Exception: [IBM][JDBC Driver] CLI0614E Error sending to the socket, server is not responding. SQLSTATE=08S01
The connection chain I'm using for AIX side is:
jdbc:db2://192.168.3.4:6789/DATABASE
I've configured the firewal to allow the port 6789 to be used, and also the other port 51544 (it's for remote administration, I think). I've also checked that wires and other stuff is working fine, but stil I cannot connect to the Database.
I don't know if there's something missing on the firewall configuration. Before, everything was working without the firewall.
Any help will be apreciated, THanks.
Rodrigo, SPAIN

It looks like no port problem is happening, because we freed all the ports just to see if client tried to use some of them without our knowing. But it was still the same.
We were thinking about routing issues, but we were able to ping from client to server, and ports 6789 and 51544 were open as well. Maybe JDBC Client Driver is looking for an different IP address than 192.168.3.4. We know the firewall doesn't receive any query from JDBC Client, and that's very strange because if you see the routing tables in AIX machine, the default route is the firewall. Of course, there's not any other static defined route for the server (192.168.3.4), so it's supposed that default route is going to be used. But it's not.
We also restarted client machine from scratch but nothing. Maybe this problem happens because there's something wrong in AIX networking settings.
Rodrigo

Java.sql.SQLException: Io exception: A remote host did not respond within t

Hi All,
I am using SUN ONE Webserver 6 on AIX with Oracle 8i. Every now and then I get this error
java.sql.SQLException: Io exception: A remote host did not respond within the timeout period.
I am not able to unterstand this. Some one please help...
Thanks

Are you able to connect to the database server from the same machine where you are running SJS Web Server using JDBC?
Are the driver and the Database using compatible drivers?
Does it normally work? Is the error accompanied by other symptoms like application failure or unusually slow responses?

The remote name could not be resolved

We are running Office 365 Power BI (as a trial) and published our data through the data manager gateway service.
We are able to retrieve a list of shared tables / views through Power Query in Excel 2013 Professional Plus.
However, when clicking on edit on any table returned we get this error in the Power Query window:
DataSource.Error: OData: Request failed (NameResolutionFailure):
The remote name could not be resolved: 'SERVER-NAME.DOMAIN.local'
Details: https://POWERBISITE.hybridproxy.powerbi.com/ODataService/v1....
I have tried configuring the Data Manager Gateway service to run HTTP (at first) and HTTPS.
Could this be a port number issue? Or what else?
Appreciate any help, Thank you
Ian

Hi intrasight,
I gave the hosts thing a try.
I was getting 'unable to resolve' errors in attempting to use Power Query in a small stand-alone test domain (all computers are in the domain, and in this little LAN). So I edited
hosts in C:\Windows\System32\drivers\etc
I added this line:
192.168.0.4 mycomputer.ad.mydomain.com
mycomputer is the name of the computer running the Data Management Gateway, and
ad.mydomain.com is the name of the domain.
Now, I get
<textarea class="role-selectableText" cols="1" readonly="readonly" rows="1" style="width:659px;height:87px;" tabindex="-1">DataSource.Error: OData: Request failed: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS
secure channel. Details: https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource</textarea>
Which tells me that hosts on the client is indeed now resolving the name/IP correctly, and Power Query is finding the DMG directly (rather than via the
hybridproxy.powerbi.com cloud service).
But that's terrible!
A) I shouldn't need to use hosts since
B) the hybridpproxy cloud service is finding the DMG on my database machine (because the Test Connection works OK)
C) but without hosts the client Power Query says that "The remote name could not be resolved"
DataSource.Error: OData: Request failed: The remote name could not be resolved: 'mycomputer.ad.mydomain.com'
Details:
https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource
There's no way an actual production system should require editing
hosts on all client machines.
So to my mind, the original question is still outstanding.
How do I get Power Query to resolve the remote name?
Cheers, Donna
Donna Kelly

A remote server did not respond within timeout period

HI
I have a opened in servlet which is not closed.My servlet uses it for various checks.When a request comes after long time, my servlet tries to make a database call and that time I am getting following error.
java.sql.SQLException:IO Exception A remote host did not respond within the timeout period.
Please guide.
Thanks in advance.

I am using the same connection again.
The db server is up and running and the query fetches hardly any data.
when i stop and restart the servlet, everything becomes normal.

The remote computer could not be found. please contact your helpdesk

RDS Farm set up as follows 3- RD Session Host/Web servers set up as network load balanced and 2-RD Connection broker servers set up as clustered servers. I access the RdWeb farm from the internet via VPN clientless. I can get into
RdWeb with no problems, however I have few clients that can connect to RdWeb portal but once they open any application icon the error gets displayed "the remote computer could not be found. please contact your helpdesk ". The client
pc is Windows 8 with IE11 and Windows 7 with IE 10. I could not find anything that related to some users that could not connect. Help!

Hi,
Firstly please provide some more information from your side.
1. Does the other user can able to work properly without any issue?
2. Did you install the RD gateway role to allow the external user to access the internal resource? If so, please help to make sure you configure the FQDN for the RD gateway, and the external users can resolve this name on the internet.
3. Can you telnet the RD host server (like telnet server name 3389) to check whether the RD host server is available for another server?
4. Did you try to temporarily disable all of firewall and anti-virus to test if this issue persists?
You can configure RD Web Access behavior on IIS manager as per below.
IIS Manager Console > Default Web Site > RDWeb > Pages > Application Settings > DefaultTSGateway > add the "FQDN of the Remote Desktop Gateway"
After finishing all above steps, please launch the RemoteApp again to see if the same issue still exists. For more information, you can refer beneath article.
Configure Remote Desktop Web Connection Behavior
Hope it helps!
Thanks.

The Default Gateway Is Not Available / Problem

Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

RV220W reports the remote gateway is not responding.

Similar Messages

Maybe you are looking for