RV220w Restore is non-functional

Hello all,
I have recently purchased an RV220w for my up-tech home. I have configued the device, and I have backed-up the config using the Administration->Backup/Restore option. The result is a "RV220W.cfg" file.
I had since then changed some settings, but would like to revert back to the previous settings. However, when I attempt to restore the router using "RV220W.cfg" file, i get the following error:
Any suggestions?
Thanks
SAM

The configuration file is an ASCII file with UNIX line endings (LF only).
It is protected by a MD5 checksum which can be read from the line
systemConfig[1]["checksum"] = "6168..........................."
The MD5 checksum can be computed by deleting this line and computing the MD5 checksum of the file e.g. in Linux by using the GNU progam md5sum
As the checksum is invalid, you must find out, what you changed in the file and fix it, not just compute a new cheksum to replace the existing one.
You may have edited the file on a non-*IX platform doing nothing but saving it, so that the line endings may have changed from LF to CR LF. This will corrupt the checksum.
So start by making sure each line is terminated by a LF only.

Similar Messages

I restored my non functioning ipad to factory settings on itunes and I can see the ipad on itunes but the screen is still showing nothing but a very dark blue/black screen. Can I correct this myself?

Ipad won't turn on. when you press the home/on button the screen lights up a little to a dark blue/black screen.
I've forced it into recovery mode, restored it to factory settings on itunes. I can now see it on itunes but nothing is coming up on the ipad.
Can anyone offer any advice as to how I can fix this.
Thanks.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Home Page Search Is Non-Functional / Not Possible to Restore Previous Session

After the latest update (to version 29), Firefox's default home page search bar has been completely non-functional. Whether I type enter or press Search, nothing happens. Another (possibly related) problem is that the "Restore Previous Session" button is never present. I also cannot restore the previous session by clicking on the History option (it is always greyed out).

I had this and other problems with v29. But after a while everything was working
again, I hope. BTW; 
I found that after Firefox v29, a LOT of my settings and add-ons were changed /
reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''.
Check ALL of your setting. Then restart.

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Can ayone help with the best way to restore my software function?

Hi, I'm running OS 10.6.8 on an intel iMac.
I haven't done a software update for a while, due to poor connection speed, but last night, as the 'net was zipping along nicely for me, I installed all the latest reccommended updates, some via software update, but iTunes I downloaded from the apple download page.
When all the updates were installed, I restarted the Mac.
Now a large proportion of my applications, both native and non-apple, will not run.
I should add that I use firefox, and updated that last night as well.
I ran disk utility, and verified and repaired permissions. (A lot of repairs needed there!)
I tried to verify the hard drive, but it showed as needing repair, so I rebooted from my snow leopard install disc and ran the disk utility repair from there, successfully.
After I restarted in the usual manner, my software still won't run.
All I get is the "iTunes (or whatever app) quit unexpectedly" box. Hitting reopen from there just gives me the same again.
Do I need to go back and reinstall everything from scratch? OSX? Just the non-functioning apps?
The current hard drive is the third in this machine (iMac originially purchased at the start of 07).
Last time we replaced the drive was about this time last year.
I restored from time machine - the last saved back-up from there was from July of last year, as for some reason, time machine had not worked properly in the interim - I think because the drive was too full, or some such.
Anyway, I was in the process of doing a complete reinstall, update and overhaul after getting the new hard drive.
We managed to savage some of the data from the old drive, so I was going to replace what files I could into the system, then erase my external hard drive and start time machine fresh. Trouble was, the family (and there's a lot of us) all jumped in and started using the machine before I got through updating everything and I got fed up trying to sort it out. I never started time machine again. I've backed up anything I wanted kept safe on an portable external drive and a couple of USBs. Therefore my more recent data is safe if I need to go back to that time cpsue back-up from last July.
Not sure about everyone elses. My external drive probably has enough space on it to copy pretty much everything from the main hard drive, but I can't use it via time capsule. It's the wrong format, and I dont want to lose the data I have already copied to it. I could just ignore the fact the others will lose their files, but I'm not that mean spirited, so will try to back up for htem if I can, before I do anything drastic.
If I have to erase and reinstall, is it possible first to just to copy the whole drive manually to the space on my portable drive, or should I just copy everyone's user files and the cntents of the shared folder?
I'm not hugely experienced in this, so I'd be grateful for any useful suggestions.
Thanks, in anticipation.
~ Betty.

Thanks. All your help is really appreciated. I wish I could report a better outcome.
I gave it a try. Got this:
while ! curl -C - -O 'http://supportdownload.apple.com/download.info.apple.com/Apple_Support_Area/Appl e_Software_Updates/Mac_OS_X/downloads/041-4966.20110725.gt5tv/MacOSXUpdCombo10. 6 .8.dmg'; do sleep 10; done
** Resuming transfer from byte position 299
% Total    % Received % Xferd Average Speed   Time    Time     Time Current
                                 Dload Upload   Total   Spent    Left Speed
0     0    0     0    0     0      0      0 --:--:-- 0:00:02 --:--:--     0
curl: (33) HTTP server doesn't seem to support byte ranges. Cannot resume.
So, no luck there.
Sleep is always nice, but I don't find I need it ar 2.28 in the afternoon! I'm in Western Australia, so I'm guessing we're in vastly different time zones.
I'm currently attempting to get 10.6.7 combo via speed download. Thus far, 1.6% received in around half an hour. CUrrent estimated time remaining approx 33 hours!
No ethernet cable.
DSL is not available to me. I'm on a pair gain, so the only way for me to get broadband is via my wireless modem.
I tried to do network diagnostics when software updated kept failing.
It's very odd. External modem, which is what I'm using, is greyed out, so I can't select it.
No point checking the other options. Ethernet just tells me I'm not connected to ethernet or DSL, which I know. Airport wants me to select a network to join. What? I'm connected to the net NOW, via my external wireless modem. Airport is turned on, but that's only so that the other folks in my house, should they choose to do so, can connect their laptops via airport through this machine.
I've never had a problem with software update until I did the first download of the 10.6.8 combo, following the instllation of which, everything went kablooie.
I guess I'll just wait however long it takes for this speed download (not speedy, due to my currently restricted to dial-up speed isp account - but at least I can resume if interrupted) of 10.6.7 to finish and see how that goes. It could be another couple of days before I know.
Failing that, I think my next step is to go to my local Mac expert (shop 30 minutes drive from home) and see what he can suggest. It occurs to me that he may be able to give me the 10.6.8 combo on a disc or USB drive, so I can give it another try before we proceed to costly investigations. He may or may not charge me a little something for copying the .dmg file for me, but I really dont want to have to get into paying his hourly service rate for further work, if I can manage to sort it for myself. The thought of spending more money on this iMac after already replacing the hard drive (TWICE! - we're on HDD #3) holds ittle appeal. The machine is almost 6 years old. I really wish I could afford to upgrade.
I'll let you know if I have a breakthrough.
Thanks again.

System Preference Panes non-functional (some)

I am "fixing" a friends MacBook Pro as a favour, and she's getting exactly what she paid for. It may be a few years old - not sure. It's running Snow Leopard, 10.6.8, but I'm putting it in this more general section because it may not be SL-specific.
A few of the System Preferences panes don't work. A message comes up which simply says "non-functional" or something like that. Specifically, the ones whcih don't work are:
Desktop and ScreenSaver
Spotlight
Energy Saver
Background: she forgot her password, and this is on a computer which was formerly someone else's. I couldn't even get the thing to the login screen, so something else was wrong besides her password, but I had her gray Snow Leopard installation disks, so got through the re-install process, made a new User for myself, as Administrator, and was then delighted to find that all of her data was still intact. I had to add myself in to the permissions on her UserID. I made a new user for her as well, because we still didn't have her own original password, and I looked around but couldn't find it. I copied all of her data over to her new UserID.
I also did all Updates, plus tried a 10.6.8. combo update.
Then I made an error. The former owners UserID was also still there. We couldn't log on as her either, without her password, but I figured that we didn't need that anymore, checked with the current owner first, and deleted the original User (and renamed the computer). I cannot reconstruct in my mind whether the System Preferences panes malfunction occurred before or after deleting the original User.
There is other minor wonkiness, but basically the machine is running and the data has been preserved (and now backed up). But one thing at a time: I've reinstalled the OS a couple of times, without improvement. I tried to upgrade to Mavericks, but after downloading, it told me that this computer could not be upgraded (without saying why not).
I haven't found any plist files which look relevant. I did more 2 of them out of HD-Library-Preferences, without any effect, so put them back. I find the Preference Panes in System-Library-PreferencePanes, but didn't see anything to do about that. The offending panes look like they're at least present.
Is there something simple I'm missing? Can I get those panes back?
Thank you.
Charles

Macbook pros need to be at least 2009 for 13" and 2007 for 15" and 17" to run Mavericks. see system requiements.
At this point, the easiest solution will be to make your backups current, then wipe the drive and do a clean install of the system. That means more work reinstalling the backed-up data (you only want to restore data and third-party apps, not any of the system components), but it makes sure you get a clean, working copy of the system.

I cannot turn on the wifi for my 4g. The button is visible but non functional. suggestions?

I cannot turn on the wifi for my 4G. The button is visible but non functional. Suggestions?

Hello! Does the wifi button look greyed out? Here is a link regarding this issue: http://support.apple.com/kb/ts1559
What you will need to do is to first to reset network settings by going to Settings>General>Reset>Reset Network Settings, NOTE: When you do this all bluetooth/wifi passwords will be forgotten. If the issue persists then we need to do a simple backup and restore.
Follow http://support.apple.com/kb/ht1766 and http://support.apple.com/kb/ht1414 on how to backup and restore, when you restore please restore as new, do not restore the backup just yet if the Wifi is greyed out then there is a hardware issue and the device needs to be serviced. Please check your local Apple Store or call into Apple regarding service options and warranty status. Hope this helps!

Ver33 Unresponsive Script popup is NON FUNCTIONAL

My continuing problems with getting FF to Restore Session are here:
https://support.mozilla.org/en-US/questions/1022861?esab=a&s=&r=0&as=s
Using Safari to send this. FF is locked up again...
Went Not Responding on yet another tab. This one said "waiting for" server for a long time, then it changed to "connected to"
Then the Unresponsive Script popup appeared -- but as always, it is NON FUNCTIONAL. None of the 3 buttons work. None are blue.
I'm letting FF sit there for a while to see if the damn button ever turns blue...

Some Console Errors for those who know WTF they mean...
10/15/14 2:11:06 AM [0x0-0x14c14c].org.mozilla.firefox console.error:
10/15/14 2:11:06 AM [0x0-0x14c14c].org.mozilla.firefox [CustomizableUI]
10/15/14 2:11:06 AM [0x0-0x14c14c].org.mozilla.firefox Widget 'ghostery-button-container' not found, unable to move
SNIP A PAGE OF REPETITIONS
I THINK THIS ONE IS MY IP TRYING TO SNIFF MY LAN. HAPPENS EVERY 20-some SECONDS:
10/15/14 2:11:21 AM Firewall[91] 33300 Deny ICMP:8.0 192.168.1.1 192.168.1.2 in via en1
10/15/14 2:17:22 AM [0x0-0x14c14c].org.mozilla.firefox 1413353842649 GMPInstallManager.simpleCheckAndInstall INFO Last check was: 3427 seconds ago, minimum seconds: 86400
10/15/14 2:17:22 AM [0x0-0x14c14c].org.mozilla.firefox 1413353842649 GMPInstallManager.simpleCheckAndInstall INFO Will not check for updates.
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843115 GMPInstallManager.simpleCheckAndInstall INFO Last check was: 3427 seconds ago, minimum seconds: 86400
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843115 GMPInstallManager.simpleCheckAndInstall INFO Will not check for updates.
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843439 GMPInstallManager.simpleCheckAndInstall INFO Last check was: 3427 seconds ago, minimum seconds: 86400
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843439 GMPInstallManager.simpleCheckAndInstall INFO Will not check for updates.
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843984 GMPInstallManager.simpleCheckAndInstall INFO Last check was: 3428 seconds ago, minimum seconds: 86400
10/15/14 2:17:23 AM [0x0-0x14c14c].org.mozilla.firefox 1413353843984 GMPInstallManager.simpleCheckAndInstall INFO Will not check for updates.
10/15/14 2:17:24 AM [0x0-0x14c14c].org.mozilla.firefox 1413353844091 GMPInstallManager.simpleCheckAndInstall INFO Last check was: 3428 seconds ago, minimum seconds: 86400
10/15/14 2:17:24 AM [0x0-0x14c14c].org.mozilla.firefox 1413353844091 GMPInstallManager.simpleCheckAndInstall INFO Will not check for updates.

RDP Port Forwarding non-functional

OK, so I'm having yet another issue with my RV220w. I thought this would be a wise buy, but I keep finding reasons to hate myself for buying this router.
Anyway, I need to forward port 3389, Windows Remote Desktop Protocol to one of my internal servers. I have defualt NAT, defualt firewall, etc. etc. I have seen documentation that says that Firewall -> Port Forwarding is non-functional, so I attempt to set up port forwarding via Firewall -> Access Rules. I did not see "RDP" or any other obvious acronym for Remote Desktop Protocol in the services list. So, I made a custom service, called RemoteDP, TCP protocol, port 3389 to 3389.
No, I cannot RDP to my server from WAN. What gives? This was easily achieved with a cheap NETGEAR router from 2005.
Very confused, and therefore disappointed.
SAM

Join the club. . . .I have the same issues with custom rules and have been trying to get it to work for over a month now. I can only stall for so long with this problem. I need to get some ports open for established services that also was not a problem with a residential Netgear router.

My BB 8320 Camera and Sound recorder non functional

For the past year the camera and sound recorder are non functional. I have tried the following.
1.Removing the battery and SIM and rebooting.
2. Sync the BB using my Laptop Desktop Manager to sync.
3. Downloaded latest o/s available.
Nothing works. Can anyone help me?
Thanks

Hello arindamd and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're having an issue with the sound on your device.
To rule out a software issue, backup your data (see KB12487 How to back up the data on a BlackBerry smartphone) then follow the steps in KB11320 How to perform a clean reload of the BlackBerry Device Software for Windows or KB19915 Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer).
Before any software is restored test the sound recorder.
If no sound is recorded then it's likely the issue may be a hardware one in which case you will need to contact your point of sale for hardware repair options.
Hope this helps.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Calendar has been non-functional for hours, with small screen saying "Moving calendars to server account..." Help?

Calendar on Mavericks MacPro has been non-functional for hours, with small screen saying "Moving calendars to server account..." How can I restore its function?

Sorry. I found some other advice that solved the problem ere I saw your response.
The advice was:
Go to Finder. Holding "Option" key, find Library in "Go" pull down menu. In Library. Select Calendars. To desktop, drag all files with the word "cache." Then go to Preferences (still in Library) and drag to desktop "com.apple.ical.plist". Restart. Now Calendar is working perfectly, and rechecking under Library, the caches files and the com.apple.ical.plist that were dragged to the desktop have reappeared in Calendars and Preferences.
All is well. Many thanks for your reply! Sorry that I did not get to check it out.

WAKE UP APPLE. SpotLight & Time-Machine effectively non-functioning after 10.7.5 combo update

I have just done a complete clean restore from Snow Leopard DVD, doing all its Updates. Then, installed Lion from App store and did the 10.7.5 Combo update. (All that took 2 days).
Time-Machine and Spotlight non functioning....
Turned off Spotlight and Time-Machine got my apps & data back...
Turned off Time-Machine and turned on Spotlight - nothing.
Followed every combination of the many many helpful tips in this discussion group (involving Onyx, Terminal, Console, Privacy, removing all external drives etc etc). Finally Spotlght began to index.....
3 days later, it was about 60% complete but slowing down. I rebooted (nothing else) and now Spotlight has restarted the Index once again and I have 3 weeks to wait now.... (Ihave about 600 Gbyte of data on a 1 Tbyte disk)
Many others have had similar problems
So clearly there is a significant bug in the system - with no sure fire workaround - and no apparent reaction from Apple staff about what they are doing or what sequence of actions one needs to take to resolve this issue.
This is sad - Apple is going the same way as IBM, DEC, Microsoft, Adobe - loading functioning systems with more and more bells and whistles until finally they trip over their own feet with the complexity of the whole works.
I feel entitled to moan - having owned nothing but Apple computers for 30 years.
(I tried to upgrade to Mountain Lion two weeks ago, but the App store installation just froze and Apple say the DVD drive is a dying species and will supply no disks or other media to do proper restores.....!)
ANY IDEAS ABOUT HOW TO WAKE APPLE PEOPLE UP!

Time Machine just doesn't seem to function with lion or Mountaain Lion. I don't know about Spotlight, but I use Intego Backup Assistant for my backup and its doing fine.

HT201263 my power off/on button is non-functional any other steps? please :(

my power off/on button is non-functional any other steps? please reply me asap

- Try placing the iPod in recovery mode using this program and then restore
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next let the battery fully drain. After charging for an least an hour try the above again.

S10 HW 1/06, bge driver non-functional

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

RV220w Restore is non-functional

Similar Messages

Maybe you are looking for