RV220W Software Version 1.0.4.17 - problémy

Dobrý den, čekal jsem na nový FW a doufal jak se vše zlepší a nějak se to nepovedlo. WiFi neustále ztrácí propustnost, vypadává až se úplně sám restartuje router. Čekal jsem že se také trochu pořeší DHCP server na třeba načtení názvu rezervovaného zařízení nebo alespoň možnost poznámky taky beze změny :(. Nějak se mě nedaří sesynchronizovat časový server. Jiné routery v nižší třídě to již mají pořešené daleko lépe. Zkusím vypozorovat za jakých podmínek se to vyskytuje. Jestliže máte táké někdo problémy připište je, ať se další FW trochu lépe povede. Kdo jste obdobné nedostatky pořešil pochlubte se.

Dobrý den, vámi popisované problémy a mnohé další se bohužel týkají všech "Cisco" Small Business zařízení, ke kterým vyvíjí firmware společnost TeamF1 (http://www.teamf1.com/) - namátkou RV220W, RV120W, RV180(W) a další. Situace s firmwary je naprosto tragická a nechápu, jak se takový šmejd vůbec mohl dostat k zákazníkům. Vina ovšem nebude jen na straně TeamF1, protože tato společnost vyvíjí firmware i pro zařízení Netgear, se kterými mám vcelku dobré zkušenosti (FSV336g apod.).
Sám jsem byl nucen po neskutečných peripetiích s několika routery RV120W všechna tato zařízení stáhnout od zákazníků a naštěstí se mi je nakonec podařilo vyreklamovat a vrátit dodavateli. Je to typický příklad toho, jak se dá relativně solidní hardware routeru pokazit nedodělaným ovládacím software. V této cenové kategorii s IPsec VPN bohužel nic moc neseženete, já jsem nakonec zvolil Mikrotik a pfSense, které lze oboje bez potíží spojit IPsec VPN s Cisco IOS zařízeními.
Doporučuji projít anglické fórum, kde je spousta příspěvků k závadám firmware routeru RV220W (https://supportforums.cisco.com/community/netpro/small-business/routers?view=discussions).

Similar Messages

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed though.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Error trying to update iPhone to software version 1.0.2

I have just recently purchased an iPhone. I have no problem syncing it with iTunes. The only problem I have is every time I try to update the software version of my iPhone, it downloads the entire thing then an error message pops up as shown:
*"There was a problem downloading the iPhone software for the iPhone "name". An unknown error occured (-48).*
*Make sure your network settings are correct and your network connection is active, or try again later."*
I have received this error several times and no matter what I do, I can't get it to work. The phone is not hacked, I just purchased it 2 days ago. Its BRAND NEW. I even tried erasing all setting and info, and a restore. Still, nothing.
What am I doing wrong here? Is there something I need to do in the network settings of my iPhone? Or my cpu? I don't understand the error as I am connected to the internet.
Please, someone help me!
Thank you.

Thank you for your help. I did try to do a full restore, but had to pause the download. When I came back and resumed it, the download just kept going past the 92MB file. It went all the way up to 200MB of 92MB...I have no idea what is going on with that. So I just stopped it and deleted it.
But it takes almost an hour to download it from my connection and I didn't want to try it again. Maybe I will have to.
Any other suggestions?

I have just received an iphone 4 from a friend and it is in software version 4.3.2 still and will not update to latest version. It updates for about 3o minutes and then an error reading that my interent connection timed out? Any suggestions?

I have an Iphone 4 from a friend. It was never updated with him and now I am trying update to latest software version. It is currently in 4.3.2 and it updates till the last few seconds and then a message, with no error number, states that the internet connection had time out during update. I am using my PC and have tried unsuccessfully for a week. I have tried to restore setting on phone first before plugging in to PC and updating software through Itunes? I took it to my mobile phone outlet and they couldn't help? Is there another way?

Read through this:
http://support.apple.com/kb/ht1808

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

I am unable to update my software version on my iPod touch. It gets to the very end and tells me that my session timed out. What should I do?

Every time I try and update my software version for my iPod touch from version 4.2.1 to version 4.3.5 I get within .5 MB (409.5 of 409.6MB) to the end and an error pops up telling me that my network connection has timed out so that the update could not be completed. I start the nursing program next week and need to download books onto my iPod, but it will not let me download the updated versions until my software is updated. I have tried restoring my iPod but when I restore it it says I have to download new software at the same time, therefore I can't even restore it. I just tried resetting my iPod and erasing all data as well as uninstalling iTunes and downloading it again and it still wont work. What do I do? I need to update it so it is ready for school in a week. Any advice? I have tried calling but as I understand I would have to pay for anyone to help me and I really don't want to do that until I have to.

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..

I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.

You need to continue with the Recovery...
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... After the successful Recovery... Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

HT4972 i want to update my software version to 6.1.3. but my c drive runs out of memory and i cannot upgrade it at the end, but having to delete the files and gain more space for the computer to operate... plz help me :(

i want to update my software version to 6.1.3.. but i have never updated this before and this is my first time.. im having 20 GB apps and music in my ipod. so when i click 'update and download' tab it starts downloading the new version and upgrading,... but afetr some time it says im having a very low memory in c drive and i would have to stop the upgrading...
can i use my external hard to save this download and upgrading files without using my c drive? plz give me a solution as im only having only 7GB of space left in the C drive

I would rather you delete/move other files to the external HD rather than downloading the update file to the external HD.
First try going here and delete any update files to regain C drive space.
IPSW file location for Mac and Windows
Also, make sure that you have emptied your computer's recycle bin
You can try the manual update/restore method included here and download the file to the external HD

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

HT1947 Remote app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required. Where can I get the (old) version that runs on my IOS?

'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.

The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
This is standard for Apple. While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers. It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems. When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years. The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
As for app availability, Apple typically pulls old software versions from its site when new versions appear. If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual. Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer. If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy.

I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?

I have an older iPod Touch, Model MC086LL with an IOS software version of 4.2.1. Many of the applictions which I had previously purchased were recently upgraded and they no longer can be loaded on my iPod. What is the fix?

Reload older versions from iTunes on a computer, or buy a newer device.
(73016)

Can I update my software version from 4.0.1 to 5.0.1?

Dear friends,
I have an iphone, gifted to me, with a software version of 4.0.1. I have just been using it for more than a year now with itunes and other Apps. Everytime I connect it to the computer, it is telling that a new version 5.0.1 is available but I am afraid to download it fearing any adverse effect on my existing content and apps. (Especially so because I am not aware of its purchase details and other particulars). Some of the Apps I have do not get installed in my phone since they all need 4.3.0 or more. Please advise whether I can go ahead with downloading the latest version or whether any risks are associated.
Thanks for the help in advance!
Nrn

Plug into iTunes, select iPhone under DEVICES and right click and do a backup first before you update to 5.0.1.
It will ask you to restore, so you can choose to restore from backup.

Software versions on fieldpoint controller

I was updating my cFP 2120 with the newer software versions (because I'm having some problems with communication via Datasocket and logos, which I'm going to post in the Labview forum, and thought this might help), updating all software versions to that of my PC. Too late, I noticed that I updated the Labview RealTime to version 8.0 from version 7.1 but I am only running LV 7.1 both on my realtime app and on my PC. Now when I try to set my LV target to my cFP I get the error: "Access denied: LabVIEW RT communication protocol version mismatch." I'm assuming it's because of the 8.0/7.1 descrepancy. So I tried to go back to LabView RealTime 7.1 on the cFP but when I do that it gives me the error: "Cannot process install because other dependencies are required: LabView RealTime 8.0." I think I'm trapped in a circle!
So my most basic question is, How do I go back to the way it was?
My other question is, is there somewhere to get a list of the most current versions of the software that should be installed and are compatible with LV 7.1? The ones that I need to know are the ones installed on the cFP controller (the list that appears when you right-click on Software and choose Add/Remove software):
Datasocket for LabVIEW Real-time - 4.3 or 4.2?
FieldPoint drivers - 5.1.2 or 5.1.0?
FieldPoint VI Manager - 4.0.0 or 3.1.0?
LabVIEW RealTime - 7.1 or 8.0?
NI-IrDA RT - 1.0.2 or 1.0.1? (I don't even know what this is)
NI-Serial RT - 2.5.6 is OK?
NI-VISA - 3.4.1 or 3.3.1 or 3.2?
NI-Watchdog - 2.1.4 is OK?
I also have a Network Variable Engine and a Variable Client Support but neither are installed on the cFP - don't know if they should be.
In general I'm using Fieldpoint 5.0, I'm assuming this is OK for LV 7.1??
Thanks for any insight.

Hi !
I’m new on FP platform and I have quite the same problem :
on my controller (2120) :
fieldpoint drivers 5.1.2
fieldpoint Vi manager 4.0.0
real time 8.0
... (see the attached image)
this set-up was made by my predecessor (gone forever with the coding computer)
for some obscure reasons and now my boss ask me to make some modification on
the code, so I tried to deploy a new version on the FP and of course there is a
version compatibility problem with versions installed on my computer
I have tried both LV 8.0, 8.2, LV real time 8.0, 8.2
I need LV and LV RT 8.2 to open the project and I was unable to export it to a
previous version (8.0)
real time 8.0 seems to be needed by the controller (instead of 7.1) but when I
try to deploy I think 8.2 is used by my computer
the LV code deployed on the controller works fine but we need to add some fonctionalities, I was thinking of re-inteall all the compatible versions but my boss doesn’t want me to modify the software installed on the controller because
in case of a problem we have a production problem ... so I can just do watever I want with my computer
in he's memories a NI guy is came few months ago to make some modification on
the coding computer (gone) but there is no information about what does he made…
is there is a way to get off this shit ?
sorry for my
poor english
matthieu
Attachments:
max.png ‏11 KB

RV220W Software Version 1.0.4.17 - problémy

Similar Messages

Maybe you are looking for