RV220W - Upgrade failed when upgrading to 1.0.4.17 from 1.0.1.0

I am a router newbie. I have a RV220W running 1.0.1.0.
When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: https://supportforums.cisco.com/message/3437182#3437182
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0? I'm trying to avoid configuring the router manually all over again.

Hi bpattersoncisco, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for this issue you are having updating your device, you are right; in this case you can follow these steps:
1) Create a backup of your configuration.
2) Perform a factory reset.
3) Update your device with the last firmware version.
4) Perform a factory reset again in order to complete the process.
5) Upload your previous configuration.
This process will update your firmware and you will save your time with the configuration. I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

MBAM Upgrade 1.0 to 2.1 - Failing when 1.0 DBs need upgrade

Hello,
Installation of MBAM 2.0 SP 1 (2.1) fails when trying to upgrade existing MBAM 1.0 databases with the following:
MSI (s) (74:10) [16:33:53:635]: Doing action: InstallReportingDb
Action 16:33:53: InstallReportingDb.
Action start 16:33:53: InstallReportingDb.
MSI (s) (74:D0) [16:33:53:639]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI504B.tmp, Entrypoint: InstallReportingDatabase
SFXCA: Extracting custom action to temporary directory: C:\Windows\Installer\MSI504B.tmp-\
SFXCA: Binding to CLR version v2.0.50727
Calling custom action MBAMServerCAs!Microsoft.Windows.Mdop.BitlockerManagement.SetupCAs.RunDbInstallScript.InstallReportingDatabase
RunDbInstallScript Reporting Db CA: BinDir - F:\Program Files\Microsoft SQL Server\100\Tools\Binn\SqlCmd.exe
RunDbInstallScript Reporting Db CA: dbInstance - MSSQLSERVERNAMEHERE
RunDbInstallScript Reporting Db CA: sqlScript- C:\Program Files\Microsoft\Microsoft BitLocker Administration and Monitoring\Setup\ReportingDB.sql
RunDbInstallScript Reporting Db CA: dbName- MBAM Compliance Status
RunDbInstallScript Reporting Db CA: defaultFileName- MBAM Compliance Status1
RunDbInstallScript Reporting Db CA: defaultDataPath- F:\Mounts\ApplDb\
RunDbInstallScript Reporting Db CA: defaultLogPath- F:\Mounts\ApplLog\
RunDbInstallScript Reporting Db CA: scriptLogPath - C:\Users\INSTALLINGUSERNAMEHERE\AppData\Local\Temp\InstallComplianceDatabase.log
RunDbInstallScript Reporting Db CA Exception: Install Recovery database Custom Action command line output Exception: Cannot ALTER 'ComplianceCore.GetComplianceStatusForVolume' because it is being referenced by object 'MachinesVolumesView'.
CustomAction InstallReportingDb returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 16:33:56: InstallReportingDb. Return value 3.
TDE has been disbaled on all databases.
I can install MBAM 2.1 on this server when not trying to use MBAM 1.0 existing databases.
I can install MBAM 2.1 on this server when using existing MBAM 1.0 databases from a default install (no data).
I need to be able to take my 1.0 data with me to 2.1.
Thank you

Hi,
Please confirm you use the correct upgrade sequence.
Manual in-place server replacement – You must manually uninstall the existing MBAM server infrastructure, and then install the MBAM 2.0 infrastructure. If you are using MBAM
with Configuration Manager, you must also remove the Configuration Manager objects. You do not need to remove the databases to do the upgrade. Instead, you select the existing databases, which were created by the previous version of the MBAM Client, and the
MBAM 2.0 upgrade installation then migrates the existing databases to MBAM 2.0.
The related information:
Tip of the Day: MBAM 2.0 - Server Upgrade
http://blogs.technet.com/b/tip_of_the_day/archive/2014/05/20/tip-of-the-day-mbam-2-0-server-upgrade.aspx
Upgrading from Previous Versions of MBAM
http://technet.microsoft.com/en-us/library/dn145058.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have an sony vivaz, i want to upgrade the software. i had downloaded the upgradtion software. bUt it fails to upgrade, even it fails when i use phone repair in pc suit. What should i do?

I have an sony vivaz, i want to upgrade the software. i had downloaded the upgradtion software. bUt it fails to upgrade, even it fails when i use phone repair in pc suit.
What should i do?

Hello @chavanjayesh2001... I wanted to give you some tips for when you can't update the software of your phone:
-Make sure that the Internet connection is good. If the update process is interrupted it might be due to loss of Internet connection.
-Try using another USB cable and usb port in your computer.
-Try using another PC.
-Temporary disable any firewalls and or antivirus software.
-Start your PC in “Safe mode with networking” mode. This is done by pressing F8 during PC boot. When Windows is started in safe mode, try taking the update again.

My Imac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?

My iMac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?   I need to upgrade in order to install latest software.

It would be lovely to know what your talking about. Upgrading from Snow Leopard does not involve discs.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right.

Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade?

I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
MacBook Pro
15 – Inch Core 2 Duo
Processor 2.33 GHz Intel Core 2 Duo
Memory 4 GB 667 MHZ DDR2 SDRAM
Graphics ATI Radeon X1600 256 MB
Serial Number W8****W0L
Software Mac OS X Lion 10.7.5 (11G63)
Is my system capable of running the new upgrades?
<Personal Information Edited by Host>

kar89 wrote:
I downloaded OS X 10.9.5 and when I attempt to load the program from OS X 10.7.5 I click on the install icon and nothing happens. How do I install the upgrade? Can I upgrade from Lion to Mavericks? Here are my specs:
Sounds like you downloaded the OS X Mavericks 10.9.5 Update or Combo Update. Neither will work on a version of OS X prior to OS X Mavericks. Those are only used to update an existing install of OS X Mavericks. The Combo will update any version from 10.9.0 thru 10.9.4. The Update will only update version 10.9.4.
You need the full installer of OS X Mavericks from the App Store. However, the App Store no longer offers OS X Mavericks. Yosemite is the new FREE OS X.

I upgraded to Yosemite 10.10.2 from the last cat. Now my QuarkXPress 9.5 crashes when I open/create a document

I upgraded to Yosemite 10.10.2 from the last cat. Now my QuarkXPress 9.5 crashes when I open/create a document

Check for compatibility: See App Compatibility Table - RoaringApps.

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode, but it has happened while I'm working.

Since I upgraded to OS 10.6.8 from 10.5.x my 2x3GHz quad-core Intel Xeon desktop spontaneously turns off as if I pulled the plug. Mostly it happens when there is no open software and it's in the sleep mode (because it spends more time like that), but it has happened while I'm working. It just suddenly quits.

This is a suspicious sign of power supply failure. I would have that checked into. Others who have had similar problems have had the power supplies replaced which fixed the issue.

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I g

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I get clarification on the $29.99 offer and who it is available for. Thank you

Hi there
The 29.99 introductory offer is for existing CS customers ie customers with a CS3-CS6 product (suite or individual product).
Hope this clarifies matters.
Thanks
Bev

Hi. I'm trying to upgrade my 3G iPad 1 software from 3.2.2 to 5.0.1. iTunes tells me to upgrade. It then backs up my iPad Ok but it won't 'restore'. Thus the upgrade fails. Does anyone have any suggestions please?

Hi. I'm trying to upgrade my 3g iPad 1 software from 3.2.2 to 5.0.1. iTunes tells me that I need to upgrade. It then backs up my iPad OK. But then it won't 'restore' and the upgrade fails.
Does anyone have any suggestions, please.
Thanks - Dafyd

The version of iTune for the Mac is not capable of running on an iPad.

Upgrade Sharepoint 2010 SQL Reporting Services from 2008 R2 to 2014

I'm about to do the upgrade of SharePoint 2010 Reporting Services from 2008 R2 to 2014. The instructions say it can be done "in-place" with no downtime. I've seen this article:
http://whitepages.unlimitedviz.com/2012/03/upgrading-sql-server-reporting-services-to-2012-in-sharepoint-integrated-mode/
It covers 2012 so I assume the same holds true for 2014.
I'd like to get the low down from anyone who has actually performed the upgrade of SSRS from 2008 R2 to 2014. Anyone done this upgrade? Any issues?
David Jenkins

So far I would have to say that the upgrade can be done "in-place" but there is a "DOWNTIME".
This article has helped a lot:
http://blogs.catapultsystems.com/tlingenfelder/archive/2012/07/10/upgrading-sql-server-reporting-services-2008-r2-to-sql-server-reporting-services-2012-in-sharepoint.aspx
In the article it tells you about a bug in the SQL Upgrade process where
the Domain account you use will not work. When you type in the password it fails. On top of that it will lock the Domain account because of a bad password! There is probably something wrong with the authentication process and it garbles the password.
Anyway, you end up having to change the account to the "Network Service" account before you can do the upgrade. This means the services get restarted which means???
DOWN TIME! He goes over other errors. I haven't reviewed these issues yet.
The other thing I learned is that everything needs to be SQL Server 2008 R2 SP2 in order to upgrade. You don't find this out until almost the last step in the installation process.
Now I have to wait until next week to actually do the upgrade because I have to schedule an SP2 install. :(
David Jenkins

Load Report failed when opening Report under IIS 5.1

I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5). I am using Visual Studio 2008 with the CrystalReportViewer. Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Failed. The detailed exception follow:
Error loading report (ConfigureCrystalReports)
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at ncspo.ReportViewer.ConfigureCrystalReports() in D:\Websites\NCSPO\FIS\ReportViewer.aspx.vb:line 43
If I run the report using the ASP.Net Development Server, the reports run fine. It only fails under IIS. From other posts, I understand that i need to grant the Network Service and IIS_WPG group read/write permissions to the windows\temp folder. I have done this for the Network Service, but the IIS_WPG group was not introduced until IIS 6.0. Any ideas on how I can get this working under IIS 5.1?
Here is the code behind page:
Private Sub ConfigureCrystalReports()
            Try
                rpt = New ReportDocument
                Dim strReportFilename As String
                If Len(Request.QueryString("ReportFilename")) > 0 Then
                    strReportFilename = Request.QueryString("ReportFilename")
                Else
                    strReportFilename = System.Configuration.ConfigurationManager.AppSettings("cr404Page")
                End If
                Dim strReportPath As String = System.Configuration.ConfigurationManager.AppSettings("ReportPath")
                Dim strReportFilePath As String = strReportPath & strReportFilename
                Dim strReportFilePath_Full As String = Server.MapPath(strReportFilePath)
                rpt.Load(strReportFilePath_Full)    <--- Exception occurs on this line
            Catch ex As Exception
                lblStatus.Text = "Error loading report (ConfigureCrystalReports)"
                lblStatus.Text &= "<BR>" & ex.ToString()
                ncspo.clsMisc.LogError(ex, Me)
            End Try
        End Sub

Am I correct in reading the following 2 documents that IIS 5.1 is not supported?
If you check this document. It shows IIS6 and 7 no support on 5. See page 6
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05523e4-35c4-2b10-2c89-9fcf64b0dd22]
This document also on page 5
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a87366-da1d-2b10-e1b4-a37ab37a2dea]
Thanks.

SSRS error "Conversion failed when converting the nvarchar value"

Hi folks!
After SCCM 2012 R2 upgrade, we have errors with self made reports:
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset DataSet2. (rsErrorReadingNextDataRow)
Conversion failed when converting the nvarchar value '*****' to data type int.
I found several articles to see reporting services log file for possible WMI related errors, but none exists. SQL server is 2008R2, Runned mofcomp, and re-installed reporting services role, but problem remains.
I traced the dataset2 query:
SELECT
v_Collection_Alias.CollectionID ,v_Collection_Alias.Name
FROM fn_rbac_Collection(@UserSIDs) v_Collection_Alias
WHERE
v_Collection_Alias.CollectionType = 2
Any adwice is appreciated.
~Tuomas.

Hi Tuomas,
What's the SQL Server version? To verify the the SQL Server version, please see
http://support.microsoft.com/kb/321185
SCCM 2012 R2 need SQL Server 2008 R2 SP1 with CU 6 or SQL Server 2008 R2 with SP2 (http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLSrvReq).
If the SQL meets requirement, I would suggest you submit a thread to SQL forum to deal with the sql issue.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SOAP 1.2 web service fails when SOAP header has digital signatures

Hi,
When we upgraded our JAX-RPC web services from SOAP 1.1 to SOAP 1.2, they started failing with the following response.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<env:Upgrade>
<env:SupportedEnvelope xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"
qname="soap12:Envelope"/>
</env:Upgrade>
</env:Header>
<env:Body>
<env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>env:VersionMismatch</faultcode>
<faultstring>Version Mismatch</faultstring>
<faultactor>http://schemas.xmlsoap.org/soap/actor/next</faultactor>
</env:Fault>
</env:Body>
</env:Envelope>
The following two errors were in log.xml
An error occurred for port: {http://xxx.xxx.xxx/xxx/1.0/ws/TestService}TestServicePort: oracle.j2ee.ws.common.soap.fault.SOAP11VersionMismatchException: Version Mismatch.
Unable to determine operation id from SOAP Message.
We use web service handlers to add and verify digital signatures. The request message seems to be making it to the web service but is failing before reaching the web service handler which verifies the digital signature.
Everything works fine when we don't add the digital signatures. The SOAP message without the digital signature doesn't have the SOAP header. I've listed the SOAP message with the digital signature below.
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"
     xmlns:ns0="http://xxx.xxx.xxx/1.4/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <env:Header>
          <wsse:Security
               xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
               <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
                    <ds:SignedInfo>
                         <ds:CanonicalizationMethod Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"></ds:CanonicalizationMethod>
                         <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"></ds:SignatureMethod>
                         <ds:Reference URI="#Body">
                              <ds:Transforms>
                                   <ds:Transform Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"></ds:Transform>
                              </ds:Transforms>
                              <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></ds:DigestMethod>
                              <ds:DigestValue>...</ds:DigestValue>
                         </ds:Reference>
                    </ds:SignedInfo>
                    <ds:SignatureValue>
                    </ds:SignatureValue>
                    <ds:KeyInfo>
                         <ds:X509Data>
                              <ds:X509Certificate>
                              </ds:X509Certificate>
                         </ds:X509Data>
                         <ds:KeyValue>
                              <ds:RSAKeyValue>
                                   <ds:Modulus>
                                   </ds:Modulus>
                                   <ds:Exponent>AQAB</ds:Exponent>
                              </ds:RSAKeyValue>
                         </ds:KeyValue>
                    </ds:KeyInfo>
               </ds:Signature>
          </wsse:Security>
     </env:Header>
     <env:Body xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Body">
          <ns0:SearchRequestMessage
               xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:gml="http://www.opengis.net/gml"
               xmlns:xxx="http://xxx.xxx.xxxl/1.4/"
               xmlns:ns5="http://www.w3.org/1999/xlink"
               >
               <xxx:SearchCriteria itemsPerPage="10" maxTimeOut="180000" startIndex="1" startPage="1" totalResults="25">
               </xxx:SearchCriteria>
          </ns0:SearchRequestMessage>
     </env:Body>
</env:Envelope>
We are using Oracle AS 10.1.3.3.0, WSDL 1.1, and SOAP 1.2. Everything works fine with WSDL 1.1 and SOAP 1.1.

Take a look 'How to Use a Custom Serializer with Oracle Application Server Web Services' [1].
In your case, you should be looking at BeanMultiRefSerializer (org.apache.soap.encoding.soapenc), which will serialize your data using href and providing a way to deal with cycles.
All the best,
Eric
[1] http://www.oracle.com/technology/tech/webservices/htdocs/samples/serialize/index.html

CSCul66951 LDAP routing query fails when user name is the same (6 july 2014)

in the case CSCul66951 LDAP routing query fails when user name is the same it is mentionned that the version 8.0.2-055 correct this bug ? How come i don't see this version on my menu Available upgrades from my IronPort C370 ?
Is there someone on the support team that have try this LDAP query on a IronPort C370 with this version in the development lab ?
Do i have to open a support Case to have this version of AsyncOS ?
Best regards,
Benoit Belair
University of Quebec in Montreal

Yes - CSCul66951 - this was included w/ the 8.0.1-HP1, and is rolled into 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/release_notes/ESA_8-0-1_HP1_Release_Notes.pdf
CSCun02766 - 8.5.6-063, which was superseded by the 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_Release_Notes.pdf

WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

MTU test fails when trying to connect wirelessly to Xbox360 live. Firmware is current. I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable. Changing the MTU setting does not work. I have tried several other suggestions found on these boards but nothing seems to work. Any help would be greatly appreciated!

hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

RV220W - Upgrade failed when upgrading to 1.0.4.17 from 1.0.1.0

Similar Messages

Maybe you are looking for