RV320 "DNS Local Database" no function

I did setup a brand new RV320 today. Firmware is v1.1.0.09.
I am facing the following problem...
I filled the "DNS local database" with names and IPs and expected that
clients connected via DHCP will be able to use that names in the LAN
instead of IPs. DNS server mode is set to "Use DNS Proxy".
However, clients don't get the names resolved as expected.
Any idea, what does go wrong?

I found the same issue after setting up a local hostname in the DNS table in my RV320 (firmware v1.1.0.06) about a week ago but I don't think the explanation in your "reply" is correct. What I noticed at first is that I couldn't ping the host by name from my Windows PC, but it worked fine from my Android tablet or Linux PC. Experimenting a bit more yesterday, I ran Wireshark while pinging from my Windows PC and discovered that if I used a host name, but not a domain, the PC sent a couple of LLMNR packets (destination IP 224.0.0.252), to which it got no reply, then gave up. If I pinged an external site from Windows, e.g. www.google.co.uk, it issued a single DNS query, destination 192.168.0.1, got a response either from the RV320's proxy cache or the ISP's DNS, and carried on with echoes. If I add a domain extension to the local hostname in the name table, e.g my router's default domain, router44fda0.com, and ping hostname.router44fda0.com, the PC also issues a DNS query, and gets an instant (well, 0.864 millisecs) response from the RV320. I set up my target host with Bonjour (the avahi daemon), and pinging hostname.local from my Windows PC, found that it began with a double multicast DNS (mDNS) query (destination IP 224.0.0.251) asking for the same nodename on IPv4 (type A query) and on IPv6 (type AAAA query), to which my target Linux system responded with hostname.local and the IPv4address, but not the IPv6 address. To my surprise,125 millisecs after the PC received the IPv4 address, it issued a DNS query to the router, which responded "no such name" (the hostname was still set up with the router's default domain extension). Even stranger, the PC then issued two LLMNR queries with just the hostname, not the .local extension, to which it got no replies, and finally a second mDNS query, this time a single IPv6 (type AAAA) request for hostname.local, to which it also got no replies. So only the first mDNS query got a successful response. I presume that if had got a successful response from any of the other queries, they would have superceded the first response, i.e. it is saying if the DNS disagrees with the multicast DNS, the DNS is right, if LLMNR disagrees with mDNS and DNS, then LLMNR is right, and if it gets an IPv6 response to the mDNS query, that trumps everything!
My point is that the RV320 does respond to a DNS request, even if it only has a host name in its table. The problem encountered above is that Windows does not issue a DNS request if you ask it to open a host name with no domain.
BTW, I understand that the only reason my PC issues an mDNS query is that Apple install an mDNS extension when iTunes is installed. The mDNS query is only issued if the domain is .local

Similar Messages

CSCus07365 - should I not use DNS local database at all or I can enable it again after disabling?

I had an issue with my RV320 that it suddenly stops answering DNS queries from my LAN. I just found out that a new firmware was released last month (v1.1.1.19), and one of its "known issues" is bug id CSCus07365 according to the release notes:
Sometimes the DNS process is gone and can not reply the DNS request from LAN network.
Solution: Check if you have enabled DNS local database feature on RV320/325, disable it, and then configure and save the WAN setting page again.
From that description I am not sure if this is a one-time issue after upgrading (so that I should disable and re-enable it), or if this is still a current issue and it will be better to keep away from DNS local database at all until a new firmware is released.
Thanks in advance!

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

LRT214 DNS Local Database Configuration

I've been able to get my DNS Local Database to allow computers to access via name.lan (i.e., router.lan, printer.lan), but if I leave it just as router or printer, it won't connect.
Is this a known bug, or is there a trick to configuring it?

The LRT DNS Local Database requires the Host Name to include the router Domain Name.
Ex: mydevice.router00abfc.com
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

RV082 DNS Local Database doesn't work

I recently upgraded the firmware to 2.0.2.01-tm (from 2.0.0.19-tm). Now I noticed the RV082's local DNS server ("DNS Local Database" feature) does not work any more. Any URL-IPaddr combo I used to put in there was resolved prior to sending a request to the WAN's primary/secondary DNS server.
It isn't a PC problem. I tested on different real and virtual machines, windows and Linux. Is there new "enable" switch somwhere? Anyone, any ideas? Suppose I log into the RV082 with puTTY, what can or should I do?

You can try a factory reset and reload the configuration but the above step i suggested if it didn't work then next suggestion would to be factory reset and reconfigure manually and then test.
So yes you can try that first then try what i suggested and if that don't work then it will be next step
Factory reset and reconfigure manually.. Some times when upgrading it can cause some corrupted files and only way to fix is a factory reset and reconfigure (manually)..
Jasbryan

DNS / DNS Local Database problem

Dear Forum,
I have a
RV082 10/100 8-Port VPN Router V03 Firmware v4.1.1.01-sp (Dec 6 2011 20:03:18).
When I set the DNS Servers of DHCP to google (8.8.8.8) everything works like a charm.
In order to use the DNS LOCAL I set the DNS Server to the RV082 address.
I then can resolve the local adresses but not normal internet adresses like www.cisco.com.
They time out. I still can ping everything when I know the IP. But it seems the router does not forward the request.
The WAN Interface has as well the Google DNS Server 8.8.8.8 configure.d
Any hints ?
best regards
Dirk

Dear Forum,
I have a
RV082 10/100 8-Port VPN Router V03 Firmware v4.1.1.01-sp (Dec 6 2011 20:03:18).
When I set the DNS Servers of DHCP to google (8.8.8.8) everything works like a charm.
In order to use the DNS LOCAL I set the DNS Server to the RV082 address.
I then can resolve the local adresses but not normal internet adresses like www.cisco.com.
They time out. I still can ping everything when I know the IP. But it seems the router does not forward the request.
The WAN Interface has as well the Google DNS Server 8.8.8.8 configure.d
Any hints ?
best regards
Dirk

How to use local database for Education Portal

Hi All,
We are implementing a Education Portal (learning Solution) and here are our requirements
1. Course details are stored in R/3 portal
2. When users login to the education portal, course catalog should be displayed with all the details and here the course catalog should not be displayed directly from R/3.
3. course catalog should be read from some local database or XML ( how to update the local database/ XML from R/3 data periodically)
4. Once when user sees the course details, if he wants to buy the course, he will register and do the payment.
5. User details should be stored in the local database and only if he do the payment and his registration details will be stored in the R/3.
Is any one have any idea how to go ahead with the above function and give some inputs.
Regards
Ponnusamy

Hi,
Basically, you would have to use plain JDBC / Open SQL or some persistence framework on top of it (e.g. JPA if you're on Java EE 5 / NW CE 7.1, or EJB CMP, JDO, Hibernate with previous NW releases) to store and load data in the local DB. For updating the backend ("R/3") you would use SAP JRA which is based on SAP JCo.
Search for these terms on help.sap.com and you will find plenty of information about it.
HTH!
\-- Vladimir
PS: Once again, I'd like to remind you to read the [Rules|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], in particular regarding cross-posting. Violating the rules may result in banning your user.

Adobe AIR Local Database Questions

Hi All,
I have very limited experience using Adobe AIR but it seems really cool since I'm plenty familiar with jQuery and other web technologies. We have a client interested in creating a desktop application that would rely on the local database feature of AIR. I have some questions though before I begin development.
I understand that AIR uses SQLite correct?
How robust is this database system? Some of the larger implementations of the AIR desktop software we're planning could have 500,000+ db records, is AIR cut out for this?
Where can I get some info on making use of the local database?
Here's some other non-DB related questions:
Can we send out software updates via CD for those without an internet connection at thier location?
Can AIR allow an application to interact with a USB device?
Thanks for all your help!!

Hi,
note: I'm not expert
#1
yes, AIR uses SQLite (3.6.*.? now one exactly knows as it is undocumented and sqlite_version() native function will throw runtime error to be handled)
#2
it depends for what purpose it will be used and how, yes? e.g.:
http://stackoverflow.com/questions/3160987/can-sqlite-handle-90-million-records
#3
http://www.adobe.com/devnet/air/flex/articles/air_sql_operations.html
(User experience considerations with SQLite operations)
http://livedocs.adobe.com/flex/3/html/help.html?content=SQL_01.html
(docs)
#4
there is an option now to create native installer for platform which could be send off-line. It asks user to overwrite content if application is already installed, etc
#5
please define "interact" with USB? as disk or interface to talk with some device? Air itself cannot talk to low level ports but could start native process (NativeProcess) to some application/tool/process that could act as middle-tier between your application and usb:
http://www.adobe.com/devnet/air/flex/quickstart/articles/interacting_with_native_process.h tml
kind regards,
Peter

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

Can i use local database in webdynpro

Hai,
I want to store a string in the local database. is it possible to store in local dictionary-->structures.
using this how cani store , retrieve, update and delete the data in the local dictionary.
regards,

Hi Naga,
It was discussed already:
store data in database and access
making database connection
REG: DATABASE Connection
Best regards, Maksim Rashchynski.

Remote and local databases

let say that i access a oracle form through the web and that form access data from two distributed databases, then will there be a remote database and local database for the user or all the databases will be remote databases to the user

In my opinion.
using local databases -- access tables without DB_link
using Remote databases -- access tables through DB_link

After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
Sachi

Hi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
        1)     Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2)    now if you have ACS 3.3.2 on server. take backup of the ACS
3)   Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4)     Once you are at 3.3.4, take a backup and keep it handy.
5)     Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7)     Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8)     Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9)     Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set.

Is there a way to create a web or simlar link to a local database only?

So my situation is this
I have an access 2007 database that stores the names of customers and their usual orders.
I want to create a link to this database somehow so that anyone on the network can access something like a search page that will be stored on the desktop and it will bring up the results found.
I don't want people to have to constantly go into the database and do it that way.
The database has confidential info in it so will never go online only stay as a local database.
Im unable to install anything on these computers ie PHP, ASP, MYSQL, so it there a way of doing this without either putting the database online or installing another program.
The scenario I want is this ... Customer calls up we have either a web or form search, we tap in their name or as there's not many records even a drop down box will do and it brings up their details.
Im open to any other suggestion as to how I can achieve this.

It sounds to me like you want to "split your database."
Assuming A10 or higher: Go to the Database Tools tab | Move Data | Access Database and click F1 for more help
peter n roth - http://PNR1.com, Maybe some useful stuff

Remote Database connection error on local database while running a procedur

Dear Gurus,
I am trying to run a procedure to grant Select Access to all objects of a schema to all schema but getting below error messages:
Error report:
ORA-02019: connection description for remote database not found
This is on local database and all required privileges have been given to run this procedure but I dont understand why this error is being thrown every time. I am able to fetch all the tables directly (i.e. SELECT object_name FROM user_objects where OBJECT_TYPE IN('TABLE','VIEW','MATERIALIZED VIEW') AND STATUS='VALID')
Kindly let me know if you have any solution.
Procedure detail:
declare
sqltxt varchar(250);
cursor course_det is
SELECT object_name FROM user_objects where OBJECT_TYPE IN('TABLE','VIEW','MATERIALIZED VIEW') AND STATUS='VALID';
v_objnm user_objects.object_name%type;
begin
open course_det;
loop
fetch course_det into v_objnm;
exit when course_det%notfound;
sqltxt :='GRANT SELECT ON ' || v_objnm|| ' TO public with grant option';
EXECUTE IMMEDIATE sqltxt ;
end loop;
end;
System detail:
Oracle 11.2.0.3/Linux 5.3
Ragards.
Edited by: 877938 on Mar 20, 2013 12:27 AM

Hi,
It seems you are fetching records from one database to other. for that you need to create dblink for that.
Create dblink first and then try to fetch records using that dblink.
ORA-02019: connection description for remote database not found
Cause: An attempt was made to connect or log in to a remote database using a connection description that could not be found.
Action: Specify an existing database link. Query the data dictionary to see all existing database links. See your operating system-specific Net8 documentation for valid connection descriptors.

Error while importing a dump file in my local database

Hi,
I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
I'm getting the following error while importing the dump file:
Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
IMP-00015: following statement failed because the object already exists:
"CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
"SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
"32767M EXTENT MANAGEMENT LOCAL "
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
"ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
"EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
"GEMENT AUTO"
IMP-00015: following statement failed because the object already exists:
"CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
"VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
"7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
"01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
"T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
"T AUTO"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
"DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
" EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
"_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
"EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
IMP-00015: following statement failed because the object already exists:
"CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
"PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
"_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
"CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
"D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
"PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
"SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
"PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
" "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
"SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
"PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
"PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
"ABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
"ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
"PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
"SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
"ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
"ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
"ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
"PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
"ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "SELECT_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "EXECUTE_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "DELETE_CATALOG_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "RECOVERY_CATALOG_OWNER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "GATHER_SYSTEM_STATISTICS""
IMP-00015: following statement failed because the object already exists:
"REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AQ_USER_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "AQ_USER_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "SCHEDULER_ADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "HS_ADMIN_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "AUTHENTICATEDUSER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OEM_ADVISOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OEM_ADVISOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OEM_MONITOR""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OEM_MONITOR" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "WM_ADMIN_ROLE""
IMP-00015: following statement failed because the object already exists:
"REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVAUSERPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVAUSERPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVAIDPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVAIDPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVASYSPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVASYSPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVADEBUGPRIV""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "EJBCLIENT""
IMP-00015: following statement failed because the object already exists:
"REVOKE "EJBCLIENT" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVA_ADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVA_ADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "JAVA_DEPLOY""
IMP-00015: following statement failed because the object already exists:
"REVOKE "JAVA_DEPLOY" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "CTXAPP""
IMP-00015: following statement failed because the object already exists:
"REVOKE "CTXAPP" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "XDBADMIN""
IMP-00015: following statement failed because the object already exists:
"REVOKE "XDBADMIN" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "XDBWEBSERVICES""
IMP-00015: following statement failed because the object already exists:
"REVOKE "XDBWEBSERVICES" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OLAP_DBA""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OLAP_DBA" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "OLAP_USER""
IMP-00015: following statement failed because the object already exists:
"REVOKE "OLAP_USER" FROM SYSTEM"
IMP-00015: following statement failed because the object already exists:
"CREATE ROLE "MGMT_USER""
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
"EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
" BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
"999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
"99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
"999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
"7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
"999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
"999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
"99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
"9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
"99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
"999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
"99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
"999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
"999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
"99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
"9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
"99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
. importing OLAPSYS's objects into OLAPSYS
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
"99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
" INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
" 1 START WITH 1 NOCACHE ORDER CYCLE"
I've been waiting for hours, but still it is blocked at the same place, that is:
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
" 1 START WITH 1 NOCACHE ORDER CYCLE"
I've tried recreating the database, but still the error is the same.
I've tried including the ignore=Y, that is:
C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
FULL=YES IGNORE=YES
The error generated is as displayed below:
Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing OLAPSYS's objects into OLAPSYS
Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
Please can someone help me out.
Thanking in advanced

plzzzzzzzzzzzzzzzzz.............sme1 help me out

FORALL MERGE statement works in local database but not over database link

Given "list", a collection of NUMBER's, the following FORALL ... MERGE statement should copy the appropriate data if the record specified by the list exists on both databases.
forall i in 1..list.count
merge into tbl@remote t
using (select * from tbl
where id = list(i)) s
on (s.id = t.id)
when matched then
update set
t.status = s.status
when not matched then
insert (id, status)
values (s.id, s.status);
But this does not work. No exceptions, but target table's record is unchanged and "sql%rowcount" is 0.
If the target table is in the local database, the exact same statement works:
forall i in 1..list.count
merge into tbl2 t
using (select * from tbl
where id = list(i)) s
on (s.id = t.id)
when matched then
update set
t.status = s.status
when not matched then
insert (id, status)
values (s.id, s.status);
Does anyone have a clue why this may be a problem?
Both databases are on Oracle 10g.
Edited by: user652538 on 2009. 6. 12 오전 11:29
Edited by: user652538 on 2009. 6. 12 오전 11:31
Edited by: user652538 on 2009. 6. 12 오전 11:45

Should throw an error in my opinion. The underlying reason for not working is basically because of
SQL> merge into   t@remote t1
     using   (    select   sys.odcinumberlist (1) from dual) t2
        on   (1 = 1)
when matched
then
   update set i = 1
Error at line 4
ORA-22804: remote operations not permitted on object tables or user-defined type columnsSame reason as e.g.
insert into t@remote select * from table(sys.odcinumberlist(1,2,3))doesn't work.

RV320 "DNS Local Database" no function

Similar Messages

Maybe you are looking for