RV320 two wan and wifi

Hi,
just buy a RV320 and I have both wan configured to failover.
Wan1 has fix ip and Wan2 has dynamic ip.
I would like to know if i can configure one router to provide WIFI. I tried to create a VLAN in Cisco and isolate wifi but does not work. The router is in bridge mode.
I hope someone can guide me to solve this problem.
thank you very much
pd: sorry for my english but is not my mother tongue....

Hi Marty,
thank you for your answer.
This my configuration:
default Vlan: 172.16.0.1
Vlan2: 192.168.2.1
WAN1: 217.172.x.x
WAN2: dinamic ip PPPoE
The switch is connected to port Lan 1 and an old router to port Lan 2 to provide wifi on an isolated network.
The router has not a special configuration, ip: 192.168.2.2, wifi, dhcp with default gateway 192.168.2.1
i can connect to wifi but i can not ping to 192.168.2.1
any help would be appreciated

Similar Messages

  • RV320 loosing WAN and inter VLAN connectivity

    I just received a new RV320 V01 router and I am having trouble with the router loosing WAN and inter VLAN connectivity. Anywhere from 2 to 24+ hours the router will stop routing traffic to/from the WAN and other VLANs on the network. I have a ping trace running on one system and all packets are lost when the routing fails to all WAN connections and systems on other VLANs. I am still able to ping all of the router address for the VLANs i.e. 192.168.1.1, 192.168.2.1, 192.168.3.1 etc. Unfortunately I only have one system on this VLAN so I do not know if I can ping other systems on the same VLAN. I also do not have any DNS resolution when the issue occurs.
    The router is set up using a single ISP connection on WAN1 using DHCP assignment. WAN2 is disabled in the router settings. The router has version v1.1.1.06 firmware. I have also tried disabling VPN pass-through as noted from other posts. When the issue occurs the WAN1 connection is showing as “Connected (Inactive)” with no assigned IP address, gateway or DNS servers. The router is in gateway mode and everything works fine until the problem.
    Any Ideas?

    You noted that the WAN 1 connection has no IP address when this occurs.
    When it occurred last, I noted the "Connected (Inactive)" on WAN1 and that there were no IP addresses assigned.  I have a screen shot of the page attached.  I had noticed the "Connected (Inactive)" previously when the problem was occurring but cannot definitely say there were no IP addresses at that time.  I do not recall if I noticed this before or after I had disconnected the WAN1 to test a direct PC to modem connection.  I did check with the cable company and there are no issues being noted or logged on my connection.  The direct PC to modem connection worked fine.
    What type of Internet connection is it? (Cable, DSL, T1, etc)
    The connection is Cable
    Is the WAN port configured for DHCP?
    The WAN port is configured for DHCP
    Who is the ISP?
    The ISP is the local cable company
    When the issue occurs, can devices within a subnet ping each other?
    As I noted in the original post, at the time I was on a VLAN that only had one system running to monitor ping traces.  I will try again next time the problem occurs to have multiple devices on the same network.
    Are there any switches in the network?
    Yes, there is a switch in the system.  I am using a cisco SG200-26.  However, the problem persists even when I directly connected a PC to the active LAN port on the router.  No issue when the PC was dirrectly connected to the modem.
    Can you draw a simple topology showing the network with IP addresses, VLANs, etc?
           See attached

  • TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

    I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

    Each device needs a separate address. Use an email address (gmail.com) on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • TS3992 my ipad has said to me that it hasn't been backed up in two weeks and it will do it automatically after i plug it in and connect it to wifi it would do it! but it has been two days and the screen has frozen the screen so i can't do any thing to sto

    my ipad has said to me that it hasn't been backed up in two weeks and it will do it automatically after I plug it in and connect it to wifi it would do it!

    Please try to make a "hard reboot" by holding down the home button + the power button (at the same time) for a few secons until it start rebooting.

  • Linksys RV016 and two WANs (cable+DSL)

    Is there any good description how to configure Linksys RV016  for two WANs (cable+DSL)? It looks like switching between those two  connections not splitting what is set for WAN1 and what is set for WAN2.
    I set load balancing as
    - WAN1 (cable) all HTTP up/donw should go there
    - WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP up/down should go there
    but looks like is not working that way.
    When  I will go to speedtest.net and test a connection I always get less  amount then connected directly through cable :\ Also when people try to  use any session or IP sensitive web site it doesn't let them to log in  because session was expired (based on IP) or IP was changed.
    Thanks for any help.

    Enrique,
    On the RV082:
    System Management-> Dual-WAN
    Change to Load Balance (Auto Mode) At the bottom of the page you will now see Protocol Binding
    Select HTTPS [TCP/443~443] from the dropdown
    Select the source IP or IP range: (i.e. 192.168.1.100 to 150) This will bind HTTPS for any LAN device that uses an IP in this range.
    Select the Destination IP: Usually leave at 0.0.0.0 to 0.0.0.0 for ALL destinations
    Select the Interface to bind the protocol to (WAN1 or WAN2)
    Check the Enable box and Add to list. Save Settings at bottom of page.
    On the RV016:
    System Management-> Multi-WAN
    Look for Interface Setting and select Edit for WAN1.
    Follow the steps from above.
    Please let us know if this helps or if you need further assistance.

  • I have two ipads and two iphones.  when i try to connect from my ipad to my wifes ipad, both phones ring.  i am low tech.  how do i fix this. thanks,

    i have two ipads and two iphones.  when i try to contact my wife from ipad to ipad, both phones ring and connect.  how do i fix this.
    thanks,
    gk

    very helpful
    still not sure im savvy enough to do it but will try
    thanks,
    gk

  • We have two ipads and two different itunes accounts, can I sync my wife's apps and she mine?

    we have two ipads and two different itunes accounts. can I sync my wife's apps and she mine?

    Yes, you can use the apps from both accounts on the same iPad. You will both need to authorize each others iTunes account for use in each others computer account. You may authorize up to five Macs/PCs to use stuff from your account and that computer can then transfer the stuff to up to 10 iOS devices.
    Open iTunes in your account and have your wife sign into her iTunes account in the iTunes app. First authorize your computer account to use her iTunes stuff from the iTunes Store menu. Then have your wife download all of the iOS apps that you want to use into iTunes. Now you do the same in her computer account.
    Remember that only you can update apps acquired with your iTunes account and vice versa. So you will need to either sign into iTunes on the computer or directly on each others iPad to update any apps that need it. It is a little confusing at first, but you get the hang of it quickly.

  • Using Remote app on iPhone 5 without a separate internet connection and wifi router.

    Hi,
    I need to be able to control iTunes within my MacBook Pro remotely. Using my mobile broadband service and wireless router I've been able to get the Remote app to allow my iPhone 5 to do the job nicely through Home Share.  So I went and bought a separate WiFi router and tried to do the same thing. Of course when it didn't work, I discovered that I need an internet connection and WiFi network to make the Home Sharing work.
    So I got to thinking, can I create a WiFi hotspot using the Personal HotSpot functionality of my iPhone, set up Home Sharing on phone and MacBookPro and then use the Remote app. Ideally this would work as it seems all the key components are in place.
    The MacBook Pro accepts the iPhone hotspot as a means of Home Sharing, however the iPhone won't use the personal hotspot to Home Share and I can't connect to the iPhone personal hotspot on the iPhone itself.
    Does anyone know how to make this work for me? It would be such as neat solution if I can get it to work - not to mention the potential to save me about $200 (I need to set this model up for two people).
    Cheers
    Kathy

    Same trouble here, iPad 2 with latest OS and remote app, iPod with latest OS and app.

  • A Tale of Two iPhones and One iTunes

    So this little problem has plagued us for years... nearly three to be more precise.  We have two iPhones and one PC.  Wife syncs contacts with GMail and I sync contacts with Outlook.  Funny thing was that the tab for contact sync would not 'stick' with the phone... if I synced mine first, when I plugged hers in it would still be setup for Outlook.  Or if I changed it to Google for her and then plugged mine in it wouldn't remember my phone wanted Outlook and would sync with Google.  I gave up trying to get it working and setup a seperate profile on the PC for my wife that really was only used for her to sync her phone.  The only drawback we could see was we couldn't have a single repository for apps and I had to add music to libraries twice (one for each profile on the computer). 
    Well, now that we're on the 4S I thought I'd see if iTunes has evolved since 3 years ago when I gave up.  I uninstalled all Apple applications and loaded the latest iTunes.  The cool part of iOS 5 and the new iTunes is we don't have to connect phones any more   So now both phones show up at the same time.  I can toggle through all the tabs and see how they differ... different sets of applications are selected, different photo options, music options, etc.  EXCEPT the tab with contacts.  If I set her phone to google, my phone changes too.  I set mine back to Outlook and hers changes to Outlook.  We've mixed and matched contacts several times trying to get them to stay in tune and that is a huge PITA to clean up. 
    I tried the Genius bar.  The Genius answer was that we should probably do a restore on the phone.  I asked him to help me understand how restoring one phone would solve a problem that existed across 4 phones (two 3G's and two 4S's) and untold versions of iTunes over three years.  He just insisted that we probably need to do a restore on the 4S.  You know, because that would clearly explain the problem we also had on the 3G.  His backup plan was to call Apple support.
    So before I submit a ticket to Apple, anyone else able to confirm this limitation?  I've checked with my friends and the ones that have iPhones don't sync their contacts anywhere.  iCloud will help but we use XP and the PC software requires Vista or better so for now we're still unable to sync our contacts to our PC.
    Thanks!
    david

    On your wife's phone, when you said you've done a restore, was that a restore from backup or as a "new" device? I would suggest deleting the .ipsw file/files on your computer, connecting your wife's phone and restore as "new". When finished, DO NOT SYNC, rather eject the phone and test, verify that all is working correctly. If so, connect her phone & sync her content back.
    The .ipsw file is located here, delete all you find, there should only be one:
    ~/Library/iTunes/iPhone Software Updates
    If this works, under preferences, devices, in itunes, delete her backups, as they are most likely corrupted.

  • Technical question:  Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??

    Technical question:
    Is it possible to work on the same Lightroom catalog across two computers and have the catalog sync? If so, how??
    Here's a little more information on what I am trying to do.
    I have a desktop computer with 4tb worth of pictures that has Lightroom and Photoshop on it. I also have a laptop with Photoshop and Lightroom. I would like to be able to edit those same pictures with their current edits that are currently on my desktop on my laptop. If this can be done, I'm sure I need to be on the same wifi network for my laptop to be able to access my desktop's photo library. I am technically savvy enough to map a network drive, but how do I get my two Lightroom catalogs to sync when I make a change on one of my computers? Would i be working only on one catalog? Or two separate catalogs that would need to be manually synced to the other computer? Would it be beneficial to put my lightroom catalog on something like dropbox?
    I'd appreciate any information or tutorials if someone knows how to do this.

    I do this by having my LR catalog and photos on an external drive that I swap between the two computers.  I am on Windows and have the same drive letter assigned to the drive on both computers.
    Because the photos are on a portable drive I back up the portable drive to another hard-drive every night or after important work, because portable drives are susceptible to damage or loss.

  • I have an iPod touch and wife has a new ipad2. We share one computer. Now, when she downloads an app to her ipad the app also downloads on my iPod touch. How can we stop that?

    I have an iPod touch and wife has a new ipad2. We share one computer. Now, when she downloads an app to her ipad the app also downloads on my iPod touch. How can we stop that?

    you should have two separate account

  • HT2534 Many devices with one apple ID between husband and wife....HOW!?

    So, when my wife and I are both using separate iPads, how do we NOT get all these messages intended for the other person? One Apple ID for .... four products (Each have an ipad and ipod) makes it hectic enough. Now it's a nightmare figuring what to do. went into settings and changed HER imessages to her email address and I'm not getting anything and she's getting all of them. SO, now my devices won't recieve imessages etc. etc.
    Hope someon knows how to do this so I don't have to purchase a whole lot of more itunes crap again just because I'm not smart enough to figure out how to use a different apple id and keep my music.
    Oh, and that's it, the music and apps. We couldn't care less about most of the apps since I'm the only one BUYING them and she uses almost all free ones, but the MUSIC IS ALL ON ITUNES! Do I need to backup the entire library onto a bunch of disks and then "relicense" them from myself? How much work could THAT possibly be worth? Gotta be a simple solution. Never had so many apple products and these are my wife's first.
    HELP!!!!!!!!!!

    We're screwwwwwed! Not THAT familiar to apple, just barely plugging along and dove in with two ipads and two ipod touches. Previous experience was just two ipods (160 GB) that I had to still rotate audio books out of every few months... well, for me. My wife doesn't use hers as much. ANYWAY, I lost a zillion things with the ipod classic since it didn't have a back-up option and many of the CDs I scrounged up when it first came out were already lucky to have survived college. 8 years later and the computer that had the original files had been replaced umpteen times. ipods failed and decided to quit being a tight wad. Not sure if these gifts are worth it yet.... well, two of them were.

  • HP Photosmart 7510 touch screen, power light and wifi lights won't turn on

    I bought my HP Photosmart 7510 over a year ago, just past warranty. I've printed less than 50 pages total at home and only 3 photos. Just as of two days ago, the touch screen decided not to work anymore, and the lights that usually come on next to the power button and wifi icon won't come on either. However, when I turn it on, the same tones sound out and the scanner and ink jets move around in their usual set-up. I've troubleshooted with trying several different ways of restarting it, but to no avail.
    HP tech support phone line was a joke, I got told by the first representative (before telling him which product I had or even offering to troubleshoot) that he was going to send a repairman to my house for $149. Over the price of my printer. So I tried calling back and spoke with a young woman who, when I asked if she would help me troubleshoot my printer, said "you can't troubleshoot that, only software". Then insisted that I pay $130 for a new printer. When I asked to be transferred to her supervisor, I was yelled at, told to again buy a new HP printer, and pushed off the phone.
    I have had several HP products, I always seek them out for the brand name and have trusted the merchandise. But one year of life in a product is just silly. And unforturnately, I won't be able to convince myself to buy another one for that kind of lifespan unless I can fix this. I know I'm not the first one with this issue, is there a RECALL I'm not aware of? How can I get this puppy working again?

    Hello cbroomhead,
    I am sorry to hear about your Photosmart 7510's touch screen showing blank and not working. I understand you can still hear the printer warming up when you power it on. I would like to post you a troubleshooting guide below to try in hopes to correct the issue.
    If you have tried all of the steps and the screen is still blank, you can also try another power cable if you have one.
    Blank Control Panel Display
    If you are able to have the screen come back on, also check for a Firmware Update.
    I hope this helps!
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Windows 8 and wifi Networks

    I've just received a replacement Dell Windows 8.1 tablet.
    I had the original for two weeks and it was connected to my "home" wifi network.
    My replacement tablet, once I'd set it up using my "Outlook" account, some how, automatically connected to my "home" wifi network.
    I did not use the WPS button on the router, have never used it.
    It did not ask for the security key. How is that possible ?

    Windows is now storing WiFi passwords and roams them with your Microsoft Account.
    You can disable or enable these settings by using the Sync your settings panel.

  • Macbook Pro 10.6.8 - why am I kicked off internet (wired and wifi) every 5-10 mins? All was fine before.

    Macbook Pro 10.6.8, 2 Ghz intel core i7 - --- Why am I kicked off internet (wired and wifi) every five-ten minutes?
    All was working fine last time I was using this same wireless and cable... about two weeks ago. Solution is the restart constantly. Or to use System Preferences and do "diagnostics" and somehow – sometimes – that reestablishes the connection.
    Is there some  kind of hard reset I should do?
    Thank you in advance for any advice!
    Jane in Haiti

    Check the time and date is correct and updating with Apple's time servers.
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

Maybe you are looking for