RVHOST.exe - How to remove it?
When I start my laptop rvhost.exe cannot found. Than I click ok and everything runs fine. I try to locate this file by putting it in run widows cannot locate it.
I go in startup option but I didn't find this file name. If it is there it is not same name like rvhost.exe there is option for enable and disable.
For it there is no option for delete. If I disable all startup but it didn't go when I do start up.
Please how can I solve this problem? Thanks in advance.
You can reach this file from the system32 folder but you musn't delete this because it is a system file..i think you should do these;
1) update your antivirus program
2)if you have flash memory; install a portable virus program into it..
3)find "clean rvhost.exe from the net and copy it into flash memory
4)start your computer in safe mode
5)clean your computers from viruses and copy rvhost.exe
Similar Messages
-
How to remove alternative netbios name
We renamed a Windows 2008 R2 x64 server.
We renamed it by running
netdom computername oldname /add:newname
netdom computername oldname /makeprimary:newname
netdom computername newname /remove:oldname
REF: http://technet.microsoft.com/en-us/library/cc835082.aspx
This was done in a staged manor over a couple of days with reboot's and other configuration changes to keep services up as much as possible while changing the server's name. From the point of view of active directory everything worked. The object in users and
computers has changed name, their is no reference to oldname in the AD Database (I spent hours searching in ADSIEdit) and the DNS records are correct. We have even checked the system name table with
C:\Windows\system32>netdom computername newname /enumerate:ALLNAMES
All of the names for the computer are:
newname.ourdomain.local
The command completed successfully.
and this shows the single new name :)
However.....
The server still responds over netbios to the oldname and the newname. We tracked this back by doing a network capture and proving that it was responding to the old name. After that we ran
C:\Windows\system32>nbtstat.exe -n
OURDOMAIN: Node IpAddress: [10.x.y.z] Scope Id: [] NetBIOS Local Name Table
Name Type Status
NEWNAME <00> UNIQUE Registered
OURDOMAIN <00> GROUP Registered
NEWNAME <20> UNIQUE Registered
OLDNAME <20> UNIQUE Registered
outputs modified for obvious reasons.
We have looked in the registry and neither of the following keys contain the oldname
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames
or
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName
This is puzzling. Does anyone know how to remove OLDNAME from the systems netbios identity?
Or even any way to progress our diagnosis?Hello,
I think the information on the cache needs to be cleared.
Try this:
Ipconfig /flushdns
Ipconfig /registerDNS
nbtstat /RR
Hope this helps,
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a> -
How to remove trojan.agent-166630 from my laptop
Hi,
I have used ClamXav to identify a trojan that has found it's way on to my laptop.
The filename is: ie4setup.exe
The infection name is: Trojan.Agent-166630
Does anyone have any idea how to remove this trojan from my laptop? I have been advised that Norton isn't a great anti-virus software to use on a Mac.
Thanks.For fastest, most efficient answers to questions like this come to the ClamXav Forum.
hadfiesara wrote:
Does anyone have any idea how to remove this trojan from my laptop?
See Dealing with Infected Files. -
How to remove alert hadler?
After uninstall spcolumnpermission, SharePoint grumbles:
OWSTIMER.EXE SharePoint Foundation Alerts
Unexpected FileNotFoundException while calling alert handler for subscription 5bccbda9-0320-4297-816e-d4d44657e2b5. Alert handler assembly: SPGuys
CustomFieldPermissionLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a8a8bdc8ce8bd55f. Alert handler class: SPGuysCustomFieldPermissionLibrar
y.CustomAlertModule.
How to remove this subscription?Hello
Pls refer this
Please try to check if you have HtmlAgilityPack.sll in your GAC. If not please download this sharepoint solution. This
solution will add HtmlAgilityPack do your GAC. If this solution doesn't add this dll to GAC. Please add it manualy. In Zip file you will also find this dll file.
Thank you
http://spcolumnpermission.codeplex.com/discussions/399478
Please remember to click 'Mark as Answer' on the answer if it helps you -
How to remove viruses: savingsbullfilter and levelqualitywatcher32?
How to remove viruses: savingsbullfilterservice.exe and levelqualitywatcher32.exe? Microsoft Security
Essentials appears to remove these pop-up ad virus programs for one day, but the next day they are back. Any help is appreciated.
Thanks!Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
'''<h2>Make sure you scan with ALL programs listed above.</h2>'''
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Try a new profile. See [[Recovering important data from an old profile]]
-
ALV . How to remove the sort buttons on toolbar in ALV report?
Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m. -
How to remove blank pages from WebI Report in view page layout option
Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull. -
How to remove credit card from iphone4s
how to remove credit card from iphone4s
Not sure what you mean by this. Are you trying to remove your credit card information from the App Store/iTunes store?
-
How to remove calendar in ical
I clicked on a link that added a calendar to my ical which has now synced with my Google calendar and added all the events to it as well. Unfortunately, I did not realize that this was going to add every single instance (multiple events per day) to all my calendars.
I'd like to reverse this action but there is not easy way to do this in ical it seems. I cannot "delete" the calendar because it does not appear in the list of subscribed calendars in ical.
I subscribed to two calendars this way and I'd like to remove them both. I also have to now deal with how to remove hundreds of entries in my Google calendar....and it seems there is no batch delete there either unless I pay for a third party program....arrrgh
If anyone can shed some light on this I'd be most grateful.Thanks for your reply. I "subscribed" to a couple of motorsports calendars in iCal by visiting a direct link on the Apple website like this one: http://www.apple.com/downloads/macosx/calendars/2011motogpworldchampionshipcalen darprovisional_gpticketltd.html
This adds the events contained in this calendar directly to iCal and I can't for the life of me find a way to "unsubscribe" or eliminate these entries short of erasing them manually one by one. Unfortunately, there are many of them.
If you know how I may go about doing this in an efficient manner, please let me know! -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
How to remove folder and leaf icons from a tree
Hi,
I know how to remove when we have a mx component i.e.,
<mx:Tree folderOpenIcon={null} ...../> similarly for
closed and default leaf icon.
But how do i achieve this from an action script like say i
have,
var tree:Tree = new Tree();
tree.setFolderOpenIcon(null); ///is there something like this
or any other alternative.
Please advice.
Thanks,
Luckythe folderOpenIcon is a style so you have to set it with the
setStyle method
try:
tree.setStyle("folderOpenIcon",null); -
Here's a screenshot. I've tried everything to make it go away, including changing the browser fill color, but this just wont change. It does disappear when I preview the site online, though. Does anyone know how to remove this color? Thank you in advance!
Hi Jessica,
Please go to View > Click "Hide grid overlay".
Regards,
Aish -
How to remove % sign from List of Values
Hi ,
I have shared list of values thats is based on SQL query. At runtime the select list default value is showing as "%". Can someone suggest how to remove % and replace with null (blank)
Thanks
AaliIn ist of Values region, if you select display null as 'Yes', in 'null display value' area use space tab or type something like ' - Select-' to replace %. Or, choose Display null as 'No.
-
How to remove available downloads from the list
how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?
There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.
Maybe you are looking for
-
Item Categories Display in Contract
Dear All, In my contracts 1) In the development I am able to see the item categories ( through F4) assigned to that contract Type (No Restriction). 2) While in Production I am not able to view any Item categories ( through f4) unless I enter material
-
Error in Client import Post Processing
Hi after importing a client with SAP_ALL profile when i am running SCC7 i m getting following Error Runtime Error DBIF_RSQL_SQL_ERROR Except CY_SY_OPEN_SQL_DB Sql error in the database when accessiong a table Missing RAISING Clause in Inter
-
I had to uninstall itunes and now I cannot re-install it. Why
-
CAD login failure with CUPS integration
OK so here we go, UCCX System version: 8.5.1.10000-37 Cucm System version: 8.6.2.20000-2 CUPS System version: 8.6.4.11900-1 So we've integrated UCCX desktop with CUPs fine, CAD user goes to login gets error asking for Presence creds. CUPS and CUCM ar
-
So, I got my shiny 5S, I made a few videos in HFR, and would like to upoload them to youtube/vimeo OR just play them on my mac. I got an i7 17'MBP, so the performance wont be a problem, but, whenever i transfer my video with image capture, quick time