RVIVAUFT - Intercompant Billing Issuebut left with two types: IGA and IVA.

We use VI98 to view the Intrastat Billing documents.
But after executing we found that some Billing types are not being considered. We have almost solved the issue but left with 2 billing types: IGA and IVA.
Why these are not appearing? These billing documents are created by a Z transaction - ZORDERIC which basically calls the program RVIVAUFT. The documents are created but the Foreign Trade data (for both header and item) are not being populated.
Do not assume that we have not configured Foreign Trade data wrongly.
Everything is going fine when we use VF01 to crate I/C Billing documents. The problem is when we use ZORDERIC TCode.
If we manually put the information for these IGA and IVA Billing types, then they are appearing in the VI98 TCode.
If anyone has faced such issue, please share your analysis.
Thanks in advance.
Sumanta

Hi Sumantha ,
I assume that Foregin trade data is implemented correctly . Also , I have checked the T Code - VI98 - INTRASTAT: Select Data for Receipt via SD Intercompany Billing and RVIVAUFT is working fine . Can you once again check the Configuration of the Foreign trade data for Stock Transport Orders.
The Path is as given below :
Sales and Distribution>Foreign Trade/Customs>Basic Data for Foreign Trade>Define Business Transaction Types And Default Value>Define Default Business Transaction Type (MM).
I believe the problem is with the configuration of Stock Transport orders .
Looking forward to your findings.
Regards
Veera

Similar Messages

Why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

Custom action with XML type input and output parameter.

Hi,
I want to develop custom action with xml type input and/or output parameter.
Is there sample code for java side. How is the definition of input and/or output parameter and set/get methods?
does it need special .jar file to develop custom action like this?
Thanks.

Cemil - yes, you can use XML data types. Use the class
com.sap.lhcommon.xml.XMLDataType
for your parameter type. Here is a snippet from a custom action we use to log XML (instead of just returning the #text node like the default logger does):
public class XMLLogger extends ActionReflectionBase
    private String source;
    private String eventType;
    private String textMessage;
    private XMLDataType xmlMessage;
    public XMLLogger()
        log = new Logger("UserLog");
        source = DEFAULT_SOURCE;
        eventType = TYPE_INFO;
        textMessage = "";
        xmlMessage = new XMLDataType();
    public XMLDataType getXmlMessage()
        return xmlMessage;
    public void setXmlMessage(XMLDataType xmlMessage)
        this.xmlMessage = xmlMessage;
    public void Invoke(Transaction transaction, ILog ilog)
        StringBuffer sb = new StringBuffer();
        sb.append('[');
        sb.append(source);
        sb.append("] ");
        sb.append(textMessage);
        sb.append(XMLUtils.convertXmlToString(xmlMessage));
XMLUtils is a helper class we wrote - it's just a bunch of standard Java XML boilerplate code. The important part you need to know is XMLDataType.getDocument() will return an org.w3c.dom.Document.
I hope that was enough information to help.
-tim

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

It is not possible to do that.
Allan

I live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the there person's iCloud?

i live in a home with two other people, and one housemate tried to sync up his content from iTunes and iCloud onto another housemate's new iPad. the iTunes library only contains my content. is there any way to retrieve the other person's iCloud? Can they go out of my account? Their content is saved on their iPads, but can another iCloud be on the same home computer?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

Hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

hi.at first sorry for my bad english language.i have mac book pro with two os(win7 and mac10.9.3)when i want to restore my iPad air in mac os iTunes error 17 but in win7 easily restore!why?

Hi there saharalirezaie,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
-Griff W.

Is there a cable with two Apple connections and one USB connection?

Is there a cable with two Apple connections and one USB connection?

it would be possible without damage to the phones if only the charging pins was used
but it would mean the 2 phones would charge 1/2 as fast as normally

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Somehow I ended up with two email accts and would like to get all emails in one place

Somehow I ended up with two email accts and was able to get messages all in one place until today. Now they are fragmented and I have to go into xfinity to get Comcast mail and gmail is not transferring messages.

Try deleting one of the accounts.

Major release with two logical stbys and two physical stbys

I have a 300G 11g database in production with two physical standby and 2 logical standby databases. We are planning for a major release which include heavy data load and ddls. What would be the best way to salvage my standbys while running the release scripts.
I am afraid that we have 70/30 chance of successfully releasing the release, which means that I have 30% possibility to "restart" the release process from the point 0. Someone in my shop suggested using flashback, but I don't know if my server have that much of space to assign to the flashback recovery area. The upgrade/release takes approximately two days to run.
I was thinking of stopping the log transfer to all the standby database locations while running the load and once I am done, then transfer all the logs and re-enable the standby to "catch up", but would it work for logical standby, too?
I could not just disable all the standbys and re-create them once the release is completed because two of the standby databases are located at off-site with the limited network speed, and re-creating standby through network takes too long for us to do so.
Any thoughts would be appreciated.
Thanks,

I have a 300G 11g database in production with two physical standby and 2 logical standby databases. We are planning for a major release which include heavy data load and ddls. What would be the best way to salvage my standbys while running the release scripts. What would be the approximate size of data size it is going to load?
If its very huge then see the disadvantages:
1) Log of redo
2) in equal size of Archive logs
3) FRA/arch space issues at OS Level
4) Network traffic to 4 sites(2 physical + 2 logical)
5) Lot of archives on Standby databases too
6) How fast standby can fetch & apply?
I am afraid that we have 70/30 chance of successfully releasing the release, which means that I have 30% possibility to "restart" the release process from the point 0. Someone in my shop suggested using flashback, but I don't know if my server have that much of space to assign to the flashback recovery area. The upgrade/release takes approximately two days to run.Its production, When you flashback database it will open database in resetlogs then your complete DR setup is in trouble.
is it flashback or restorepoint with flashback?
Restore Points in Oracle10g Release2 [ID 330535.1] --> applicable for 11g too.
I was thinking of stopping the log transfer to all the standby database locations while running the load and once I am done, then transfer all the logs and re-enable the standby to "catch up", but would it work for logical standby, too?That is the good plan. Mseberg already given Documents which you can refer for logical standby.
BTW what is your protection mode?
You can refer below links for physical standby
http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#CIHIAADC
http://www.idevelopment.info/data/Oracle/DBA_tips/Data_Guard/DG_53.shtml#Physical%20Standby%20Database%20Lags%20Far%20Behind%20the%20Primary%20Database
I could not just disable all the standbys and re-create them once the release is completed because two of the standby databases are located at off-site with the limited network speed, and re-creating standby through network takes too long for us to do so.Re-creating standby is bad thinking, when you have other options.
Think how much time you can spend on performing rollforward &
how much time to re-create standbys?
Hope you have answer for this.

Report with two ALV grids and a header

Hi experts,
I have a report with two ALV grids in the same screen, each one in a separated container. The information displays it correctly. The report has been implemented by using OO Programming.
My real trouble is in the header. It must have a logo, a title with a specific font and other information.
I'll attach a capture of my need:
[Report with two ALV grids and a header|http://picasaweb.google.com/lh/photo/AcQD49QPmm-0L_jL2iMedA?feat=directlink]
Then, I want to set up the header you can see, with logo, a font with specific features. Obviously, the header you see has taken from another report. But is the same idea.
I've tried with a third container, using the CL_GUI_CONTAINER and CL_GUI_CONTAINER classes, but it doesn't work.
Any idea? Would welcome any help you can provide.
Thanks in advance,
Jorge Rojas

Hi, Jorge.
Should the header be a"attached" to any of the ALV? Or it should be carried alone?
If first applies, you've given the solution yourself: put the info & logo in first ALV's header and invoke it from the proper method.
You could use CL_GUI_DOCKING_CONTAINER CLASS to divide screen in several containers and then, in the upper one, I would create another one docking container to divide the screen into two: the written info could be performed with an HTML viewer class and the logo with a CL_GUI_PICTURE element.
Cheers.

HT204370 My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
Change it From AUTO (default) to ON
That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1.

RVIVAUFT - Intercompant Billing Issuebut left with two types: IGA and IVA.

Similar Messages

Maybe you are looking for