RVS 4000-V2: PPPoE failed - "unrecognized option '1492'

I've got a brand new RVS 4000-V2 router (firmware: Release 2.0.0.3)
Can't get a connection to my ISP using "Internet Connection Type" PPPoE. The connection works fine with any other router.
MTU size is set to "auto".
Logfile says:
Plugin pppoe loaded
PPPoE Plugin Initialized
Plugin pppoe called.
unrecognized option '1492'
I use the standard Web-administration client.
Any ideas?

Thanks
for the reply.
In the meanwhile I've tried it with another DSL-Modem - same effect: No connect to the Internet-Provided
, "unregognized option '1492'" in den Log-File.
I have no problems with the Internet Connection using a differend router from another brand with both of the modems (Siemens Plus or D-Link DSL 321B).
I have attached a screenshot of the WAN settings as requested. I tried both the auto and the manual mode. No success.
If you give me directions how to trace the WAN Port with your router, I would do so.
Best regards
helmut

Similar Messages

Running HelloWorld.jsp: Unrecognized option: -d

 Hi there.
 I'm newbie with jsp's and I'm trying to run the examples.
 I have Bea Weblogic Build 5.1.0 Service Pack 6 09/20/2000 21:03:19 #84511 running
 under Red Hat Linux 6.2 & Java 1.2.2
 My weblogic.properties is as follows (please see below)
 Error Message is (since the beggining) (please see below)
 My questions are:
 1.- What is the -d option?
 2.- What am I doing wrong?
 Thanks in Advance
 Sergio Ríos
 ****** This is my weblogic.properties (jsp part) ******
 weblogic.httpd.register.*.jsp=\
 weblogic.servlet.JSPServlet
 weblogic.httpd.initArgs.*.jsp=\
 pageCheckSeconds=1,\
 compileCommand=/usr/local/jdk1.2.2/bin/java,\
 workingDir=/home/desa/weblogic/myserver/jspclasses,\
 verbose=true
 ****** This is the terminal outpout ******
 Tue Feb 06 13:05:05 CST 2001: <ServletContext-General> file: init
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: init
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param verbose initialized
 to: true
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param packagePrefix
 initialized to: jsp_servlet
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param compileCommand
 initialized to: /usr/local/jdk1.2.2/bin/java
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param srcCompiler
 initialized to weblogic.jspc
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param superclass
 initialized to null
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param workingDir
 initialized to: /home/desa/weblogic/myserver/jspclasses
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param pageCheckSeconds
 initialized to: 1
 Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: initialization complete
 Tue Feb 06 13:05:14 CST 2001: <ServletContext-General> Generated java file: /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java
 Tue Feb 06 13:05:14 CST 2001:<E> <ServletContext-General> Compilation of /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java
 failed:
 Unrecognized option: -d
 Could not create the Java virtual machine.
 java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[/usr/local/jdk1.2.2/bin/java,
 -classpath, /usr/local/jdk1.2.2/jre/lib/rt.jar:/usr/local/jdk1.2.2/jre/lib/i18n.jar:/usr/local/jdk1.2.2/jre/classes:./lib/weblogic510sp6boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar:./lib/weblogic510sp6.jar:./license:./classes:/usr/local/weblogic/lib/jConnect.jar:./lib/weblogicaux.jar:./myserver/serverclasses:/usr/local/weblogic/myserver/servletclasses:/home/desa/weblogic/myserver/jspclasses,
 -d, /home/desa/weblogic/myserver/jspclasses, /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java])
 at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:439)
 at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:245)
 at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:300)
 at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
 at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:141)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
 at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
 at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
 at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
 Tue Feb 06 13:05:14 CST 2001:<E> <ServletContext-General> Servlet failed with Exception
 java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[/usr/local/jdk1.2.2/bin/java,
 -classpath, /usr/local/jdk1.2.2/jre/lib/rt.jar:/usr/local/jdk1.2.2/jre/lib/i18n.jar:/usr/local/jdk1.2.2/jre/classes:./lib/weblogic510sp6boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar:./lib/weblogic510sp6.jar:./license:./classes:/usr/local/weblogic/lib/jConnect.jar:./lib/weblogicaux.jar:./myserver/serverclasses:/usr/local/weblogic/myserver/servletclasses:/home/desa/weblogic/myserver/jspclasses,
 -d, /home/desa/weblogic/myserver/jspclasses, /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java])
 at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:439)
 at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:245)
 at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:300)
 at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
 at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:141)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
 at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
 at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
 at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)


 Sorry Guys, my mistake.
 I put compileCommand=/usr/local/jdk1.2.2/bin/java,\ instead of
 compileCommand=/usr/local/jdk1.2.2/bin/javac,\
 Yes, i Know, I deserve a duh!, so please
 don't hesitate to say that :-)
 Thanks anyway
 Sergio Rios
 "Sergio Rios" <[email protected]> wrote:
 >
 >Hi there.
 >
 >I'm newbie with jsp's and I'm trying to run the examples.
 >
 >I have Bea Weblogic Build 5.1.0 Service Pack 6 09/20/2000 21:03:19 #84511
 >running
 >under Red Hat Linux 6.2 & Java 1.2.2
 >
 >My weblogic.properties is as follows (please see below)
 >Error Message is (since the beggining) (please see below)
 >
 >My questions are:
 >1.- What is the -d option?
 >2.- What am I doing wrong?
 >
 >Thanks in Advance
 >Sergio Ríos
 >
 >****** This is my weblogic.properties (jsp part) ******
 >weblogic.httpd.register.*.jsp=\
 > weblogic.servlet.JSPServlet
 >weblogic.httpd.initArgs.*.jsp=\
 > pageCheckSeconds=1,\
 > compileCommand=/usr/local/jdk1.2.2/bin/java,\
 > workingDir=/home/desa/weblogic/myserver/jspclasses,\
 > verbose=true
 >
 >****** This is the terminal outpout ******
 >Tue Feb 06 13:05:05 CST 2001: <ServletContext-General> file: init
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: init
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param verbose
 >initialized
 >to: true
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param packagePrefix
 >initialized to: jsp_servlet
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param compileCommand
 >initialized to: /usr/local/jdk1.2.2/bin/java
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param srcCompiler
 >initialized to weblogic.jspc
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param superclass
 >initialized to null
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param workingDir
 >initialized to: /home/desa/weblogic/myserver/jspclasses
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: param pageCheckSeconds
 >initialized to: 1
 >Tue Feb 06 13:05:13 CST 2001: <ServletContext-General> *.jsp: initialization
 >complete
 >Tue Feb 06 13:05:14 CST 2001: <ServletContext-General> Generated java
 >file: /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java
 >Tue Feb 06 13:05:14 CST 2001:<E> <ServletContext-General> Compilation of
 >/home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java
 >failed:
 >Unrecognized option: -d
 >Could not create the Java virtual machine.
 >
 >java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[/usr/local/jdk1.2.2/bin/java,
 >-classpath, /usr/local/jdk1.2.2/jre/lib/rt.jar:/usr/local/jdk1.2.2/jre/lib/i18n.jar:/usr/local/jdk1.2.2/jre/classes:./lib/weblogic510sp6boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar:./lib/weblogic510sp6.jar:./license:./classes:/usr/local/weblogic/lib/jConnect.jar:./lib/weblogicaux.jar:./myserver/serverclasses:/usr/local/weblogic/myserver/servletclasses:/home/desa/weblogic/myserver/jspclasses,
 >-d, /home/desa/weblogic/myserver/jspclasses, /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java])
 > at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:439)
 > at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:245)
 > at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:300)
 > at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
 > at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
 > at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 > at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:141)
 > at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
 > at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
 > at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
 > at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
 > at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
 > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)
 >
 >Tue Feb 06 13:05:14 CST 2001:<E> <ServletContext-General> Servlet failed
 >with Exception
 >java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[/usr/local/jdk1.2.2/bin/java,
 >-classpath, /usr/local/jdk1.2.2/jre/lib/rt.jar:/usr/local/jdk1.2.2/jre/lib/i18n.jar:/usr/local/jdk1.2.2/jre/classes:./lib/weblogic510sp6boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar:./lib/weblogic510sp6.jar:./license:./classes:/usr/local/weblogic/lib/jConnect.jar:./lib/weblogicaux.jar:./myserver/serverclasses:/usr/local/weblogic/myserver/servletclasses:/home/desa/weblogic/myserver/jspclasses,
 >-d, /home/desa/weblogic/myserver/jspclasses, /home/desa/weblogic/myserver/jspclasses/jsp_servlet/_jsp/_HelloWorld.java])
 > at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:439)
 > at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:245)
 > at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:300)
 > at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
 > at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:181)
 > at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 > at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:141)
 > at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761)
 > at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708)
 > at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
 > at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346)
 > at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246)
 > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135)

Pptpd / pppd: unrecognized option '[]'

I am having trouble setting up a simple pptpd server on my homeserver.
My server has ip 192.168.0.2
It connects to a router which has ip 192.168.0.1
I'm trying to connect using an iPad 3 from my work.
Output from /var/log/everything when connecting:
May 3 10:52:56 localhost pptpd[26750]: MGR: Launching /usr/sbin/pptpctrl to handle client
May 3 10:52:56 localhost pptpd[26750]: CTRL: local address = 192.168.0.2
May 3 10:52:56 localhost pptpd[26750]: CTRL: remote address = 192.168.0.234
May 3 10:52:56 localhost pptpd[26750]: CTRL: pppd options file = /etc/ppp/options.pptpd
May 3 10:52:56 localhost pptpd[26750]: CTRL: Client XX.XX.XXX.XX control connection started
May 3 10:52:56 localhost pptpd[26750]: CTRL: Received PPTP Control Message (type: 1)
May 3 10:52:56 localhost pptpd[26750]: CTRL: Made a START CTRL CONN RPLY packet
May 3 10:52:56 localhost pptpd[26750]: CTRL: I wrote 156 bytes to the client.
May 3 10:52:56 localhost pptpd[26750]: CTRL: Sent packet to client
May 3 10:52:56 localhost pptpd[26750]: CTRL: Received PPTP Control Message (type: 7)
May 3 10:52:56 localhost pptpd[26750]: CTRL: Set parameters to 100000000 maxbps, 64 window size
May 3 10:52:56 localhost pptpd[26750]: CTRL: Made a OUT CALL RPLY packet
May 3 10:52:56 localhost pptpd[26750]: CTRL: Starting call (launching pppd, opening GRE)
May 3 10:52:56 localhost pptpd[26750]: CTRL: pty_fd = 6
May 3 10:52:56 localhost pptpd[26750]: CTRL: tty_fd = 7
May 3 10:52:56 localhost pptpd[26750]: CTRL: I wrote 32 bytes to the client.
May 3 10:52:56 localhost pptpd[26750]: CTRL: Sent packet to client
May 3 10:52:56 localhost pptpd[26751]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd
May 3 10:52:56 localhost pptpd[26751]: CTRL (PPPD Launcher): local address = 192.168.0.2
May 3 10:52:56 localhost pptpd[26751]: CTRL (PPPD Launcher): remote address = 192.168.0.234
May 3 10:52:56 localhost pppd[26751]: unrecognized option ''
May 3 10:52:56 localhost pptpd[26750]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
May 3 10:52:56 localhost pptpd[26750]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
May 3 10:52:56 localhost pptpd[26750]: CTRL: Reaping child PPP[26751]
May 3 10:52:56 localhost pptpd[26750]: CTRL: Client XX.XX.XXX.XX control connection finished
May 3 10:52:56 localhost pptpd[26750]: CTRL: Exiting now
May 3 10:52:56 localhost pptpd[26747]: MGR: Reaped child 26750
Notice the line unrecognized option '', it has a square between the '' (like '[]')meaning it can't display that char, but I have no idea in which config file that could be...
Output from /var/log/everything when restarting pptpd (rc.d restart pptpd):
May 3 11:01:36 localhost pptpd[26965]: MGR: Maximum of 100 connections reduced to 6, not enough IP addresses given
May 3 11:01:36 localhost pptpd[26966]: MGR: Manager process started
May 3 11:01:36 localhost pptpd[26966]: MGR: Maximum of 6 connections available
My /etc/ppp/options.pptpd
name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
ms-dns 208.67.222.222
ms-dns 208.67.220.220
proxyarp
debug
lock
nobsdcomp
novj
novjccomp
nologfd
My /etc/pptpd.conf
option /etc/ppp/options.pptpd
debug
logwtmp
localip 192.168.0.2
remoteip 192.168.0.234-238,192.168.0.245
I hope someone can help me with this!

I met the same problem after upgrading my pptpd. It seems to be a upstream bug, as I find the following code snippet in pptpctrl.c :
if (*pppaddrs[0] || *pppaddrs[1]) {
char pppInterfaceIPs[33];
sprintf(pppInterfaceIPs, "%s:%s", pppaddrs[0], pppaddrs[1]);
pppd_argv[an++] = pppInterfaceIPs;
the pointer to "pppInterfaceIPs" becomes invalid after the if block.
I simply move the "char pppInterfaceIPs[33];" line out of the if block and recompile the package. Then it works again.

RVS 4000 Email responses that need addressing

I have been bounced around between Cisco and Linksys for months….
I have two simple questions… One I know the answer on… the second, I haven’t a clue…
I have corresponded with 12-15 people at Linksys, and Cisco…
Their last answer is I should contact you…. So… Here goes…. The 16th person I’m requesting this information from….. (I can’t believe that Linksys/Cisco can’t answer these simple questions!)
Seeing that I've been checking for new firmware and IPS downloads from the Cisco site for months now, and not seeing any new downloads......
And Seeing that I'm getting nagging emails that my IPS Signature is too old, Please Update it!!!!
And Seeing that I'm still getting emails that I don't understand from the RVS 4000: -IPSEC EVENT: KLIPS device ipsec0 shut down
and I can't seem to understand How or Why it is happening, and have read manual cover to cover, and all the FAQ's, and can't upgrade it because there is no current software......
I sent the following email to [email protected] :
Hello. Have an RVS4000 Router, being used as a Gateway...
I have emails enabled, so that I'll be informed whenever there is greater than a set level of threats.... However...
If I check the logs, there are no threats... Yet....
I keep getting the following emails:
Your Signature Version is beyond 143 days. Please Update it!
I've also been getting the following emails:
-IPSEC EVENT: KLIPS device ipsec0 shut down
I'm using V1.40 IPS signature, and V1.2.11 firmware....
Yet I keep getting these emails...
I can't update the IPS Signature Version if you don't provide it!!! And you aren't!
Secondly, WHAT THE HECK DOES: "-IPSEC EVENT: KLIPS device ipsec0 shut down" MEAN????
May I suggest that the next version of firmware have options to disable the IPS "Nags" if you are not planning on writing any more code?
And, What the Heck does: "-IPSEC EVENT: KLIPS device ipsec0 shut down" mean?
Sincerely
Jan Janowski

V1.41 IPS file has been released!!!
Version: 1.41     Total Rules: 1098
In this signature, we addressed the exploits/vulnerabilities and applications
as below:
-EXPLOIT MS Video ActiveX Control Stack Buffer Overflow
A buffer overflow vulnerability exists in Microsoft DirectShow.
The flaw is due to the way Microsoft Video ActiveX Control parses image files.
An attacker can persuade the target user to open a malicious web page to exploit
this vulnerability.
-EXPLOIT Oracle Database Workspace Manager SQL Injection
Multiple SQL injection vulnerabilities exist in Oracle Database Server product.
The vulnerabilities are due to insufficient sanitization of input parameters
in the Oracle Workspace Manager component. A remote attacker with valid user
credentials may leverage these vulnerabilities to inject and execute SQL code
with escalated privilegesof SYS or WMSYS account.
Support P2P application named uTorrent up to version 1.7.2.
Signature content for 1.41
========================================================================
New Added signature(s):
1053635 EXPLOIT MS Video ActiveX Control Stack Buffer Overflow -1
1053636 EXPLOIT MS Video ActiveX Control Stack Buffer Overflow -2
1053632 EXPLOIT Oracle Database Workspace Manager SQL Injection -1
1053633 EXPLOIT Oracle Database Workspace Manager SQL Injection -2
1053634 EXPLOIT Oracle Database Workspace Manager SQL Injection -3
Modified signature(s):
1051783 P2P Gnutella Connect
1051212 P2P Gnutella Get file
1051785 P2P Gnutella UDP PING 2
1051997 P2P Gnutella Bearshare file transfer with UDP
1052039 P2P Gnutella OK
1052637 P2P Foxy Get file
Deleted signature(s):
1050521 Worm.Klez.E1 - 1
1050522 Worm.Klez.E1 - 2
1050523 Worm.Klez.E1 - 3
1050524 Worm.Klez.E2 - 1
1050525 Worm.Klez.E2 - 2
1050526 Worm.Klez.E2 ¡V 3
1050536 Worm.Blaster.B - 1
1050537 Worm.Blaster.B - 2
1050538 Worm.Blaster.B - 3
1050539 Worm.Blaster.C - 1
1050540 Worm.Blaster.C - 2
1050541 Worm.Blaster.C - 3
Number of rules in each category:
========================================================================
DoS/DDoS 51
Buffer Overflow: 241
Access Control: 92
Scan:   41
Trojan Horse: 62
Misc:   3
P2P:   40
Instant Messenger: 121
Vrus/Worm: 410
Web Attacks: 37
No Problem updating it, and the date reports Correctly!!!
THANK YOU!!!

RVS 4000 HTTP mgmt interface hangs @ Port 80 & DHCP stops working

This is the RVS 4000
Firmware version 1.3.3.5
STAR 9202 Chipset
64 MB DRAM
8MB Flash
DOS, Block WAN Rq, Remote mgmt all OFF
IPSec Tunnel none used
Internet connection is DHCP
LAN is set to DHCP with several Static devices defined
DMZ is dsabled
Functionining as a gateway
Time is set via NTP & the NRC
IPV4 Only
Everything is pretty much dedault except for QoS
Trust mode is Port, set to 4, 4, 4, 1
( Port 4 has a Linksys ATA plugged into it for VOIP services )
SIP Port Forwarding is enabled for 5060
Every day or so the Router becomes unresponsive to the HTTP mgmt interface, as well as it no longer offers DHCP services.
When this happens the only remedy is to power reboot.
Everthing comes back online just fine, however, the LOGS are initilaized so no data to figure out what`s going on.
My next step is to setuo a syslog server and have the logs copied out.
Anyone see this kind of behavior before ?
Any ideas ??
( No, I have no Torrents running at all, but I do have several devices like AppleTV, PS3s etc that run streaming Video plus I have the SPA3102 )
Thanks Derek

Hi there Vijay !
I cannot upgrade to that version of Firmware as my RVS4000 is a V1, not a V2.
Is there some way I can change it such that it will load the newer Firmware ?
This is the error I receive when trying to upgrade anyway :
"Upgrade file is not the correct type or version for this device.
Upgrade failed.
Please obtain the correct file and try again."
Otherwise the newest firmware I can load is 1.3.3.5
( which seems to have this problem )

Ant error - Unrecognized option option_name

This post is for future generations...
After a couple of months oа quite stable work my Ant script has started to fail with the following error
[javac] Unrecognized option: -J-Xmx256m
[javac] Could not create the Java virtual machine.After digging up through a few links (there were not more then a dozen google could find) asking on a couple of forums for any clues on that mystery I was almost sure I would never find how to rectify that error. But finally I got it myself. The problem was that my build.properties file has this:
javac.executable="C:/j2sdk1.4.2_08/bin/java.exe"
instead of this
javac.executable="C:/j2sdk1.4.2_08/bin/javac.exe" - note javac not java
Well, thats pretty much of my problem that was successfully resolved

Hi, thanks.
I uninstalled jdk 1.7 and have 1.5 set in as the path variable. My PATH looks like this, C:\Program Files\Java\jdk1.5.0_22\bin;
Java - version in cmd prompt gives this,
C:\setups>java -version
java version "1.5.0_22"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_22-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_22-b03, mixed mode)
Now, when i execute the weblogic jar file using this command,C:\setups>java -d64 -jar wls1035_generic.jar , I get the below error.
Unrecognized option: -d64
Could not create the Java virtual machine.

EJBDeployerTool: unrecognized option: -d

Hi all
using weblogic 5.1 on linux, jdk1.3. when trying to generate the
container with ejbdeployertool for a (simple) ejb-1.1 compliant bean,
it fails. the console says "unrecognized option: -d could not create
the java virtual machine". the messages tab shows me a verbose jre
invocation (java -classpath bla bla -d etc) that indeed includes the
-d option.
anyone have any ideas? someone asked the same question a while back
but doesn't seem to have gotten an answer.
thanks much,
josh

to answer my own question:
switched deployertool over to jdk1.2.2 and the problem went away
[email protected] (jjmerrow) wrote in message news:<[email protected]>...
Hi all
using weblogic 5.1 on linux, jdk1.3. when trying to generate the
container with ejbdeployertool for a (simple) ejb-1.1 compliant bean,
it fails. the console says "unrecognized option: -d could not create
the java virtual machine". the messages tab shows me a verbose jre
invocation (java -classpath bla bla -d etc) that indeed includes the
-d option.
anyone have any ideas? someone asked the same question a while back
but doesn't seem to have gotten an answer.
thanks much,
josh

RVS 4000 DDOS Attacks

Hello!
Since I got a NAS System connected to my Network (one Month ago) I get attacked every day by DDOS attacks.
I Just set my NAS to the DMZ of my Router and opened 3 Ports for Service of QNAP.
I assume that at this moment I got scanned and thererfore the intrusions started.
For the last month I experianced nearly every Day Internet Connection Problems and the Router didn't respond anymore.
As I found last week a new Firmwar-Version I updated my router, enabled IPS and applied the latest Security file.
In the IPS Report I found loads of DDOS and Synflood attacks.
With IPS my Router Works and I got no more problems that my Inet access is corrupted BUT now I got the Problem that my
downloadrate sunk to 20Mbit from formerly 100Mbit.
I already wrote my ISP about this situation and want them to change my WAN-IP Adress but they to it only in very urgent cases.
Is there any option to operate the RVS 4000 save AND fast???

Sorry I seem to have no access to the documentation,
I get:
Forbidden File or Application
The file or application you are trying to access may require additional entitlement or you are trying to access a file with an invalid name. Additional entitlement levels are granted based on a users relationship with Cisco on a per-application basis.
If you feel you have reached this page in error, please try one of the following methods to locate your document:
If you are manually entering the URL into your browser location bar, be sure to include the file name of the page you are trying to access (file names typically end in .htm, .html or .shtml).
Use the Search feature located in the upper right section of this page.
Return to the Cisco.com Home or select a primary site area from the top navigation bar.
Consult with your Cisco Account Manager to confirm you have the appropriate entitlement to access this page.
If you would like to contact someone about this problem, please click on the Contacts & Feedback link below.
Back
Sorry to bother You again but I have to know in other words if I have extra costs for the IPS or just have to purchase the device like the RVS4000?!? I still do not understand what you mean with paid feature.
Sorry english is not my mothertounge.

No Internet Access with Static IP and RVS 4000

I have an RVS 4000. I have several PC's to which I have assigned static IP addresses. I have recently upgraded most of the PC's to Win 7 (64) machines. I updated the firmware on the RVS4000 to 1.3.3.5 in conjunction with this. After such update (and actually before as well) I could not assign a static IP address to a PC and have access to the internet. It connects fine to my LAN, just no internet access. This is also affected on several other machines running Win XP and Win 2003 Server, so it's not just this computer.
I have:
     1. Shut down (powered off/unplugged) everything, router, DSL modem, switches, server, etc.
     2. As I said firmware is current.
     3. Yes, DNS servers and gateway, subnet, etc. are all correctly specified on the PC.
     4. Router is set for gateway mode.
     5. Set to only IPV4.
The only way it allows internet access is to use DHCP. I've even tried taking the IP address via DHCP and manually assigning the DNS servers and that works fine, but as soon as I assign a static IP internet access is immediately gone.
There must be something I'm missing, but I can't seem to find it.
Everything worked fine prior to the conversion of the Win 7 machines, i.e. I had several PC's with static IP's and no problems.
Any thoughts appreciated.

As an addendum, if I turn off the Firewall (internet access policy to disable) it will allow the static IP computer to have internet access. I have the DHCP range set to be .5 - .54 and am using a static ip outside this range. The Internet access policy is to restrict those PC's getting IP via DHCP.

Starting Web Logic Server - Unrecognized option: -jrockit

Hi,
Im getting the error "Unrecognized option: -jrockit" when I try to start the Web Logic Server as is showed below:
D:\Oracle\Middleware\user_projects\domains\base_domain\bin>startWebLogic.cmd
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
I already installed the JDK 7 64 (jdk-7u2-windows-x64) and use the generic file to install the Web Logic Server (wls1035_generic)
I got the files from here:
JDK >> http://www.oracle.com/technetwork/java/javase/downloads/jdk-7u2-download-1377129.html
Web Logic >> http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Any help I will appreciate.
Thank You,
Raul.

Note that you are using the HotSpot JDK. The option -jrockit is only valid if you are using JRockit.
When you open setDomainEnv.cmd you see something like:
if "%JAVA_VENDOR%"=="Oracle" (
     set JAVA_HOME=%BEA_JAVA_HOME%
) else (
     if "%JAVA_VENDOR%"=="Sun" (
          set JAVA_HOME=%SUN_JAVA_HOME%
     ) else (
          set JAVA_VENDOR=Oracle
          set JAVA_HOME=C:\bea\jrockit_160_29_D1.2.0-10
)which selects a certain JDK based on the set JAVA_VENDOR property.
You add the property JAVA_VENDOR above the first if statement, for example,
set SUN_JAVA_HOME=
set JAVA_VENDOR=Sun
if "%JAVA_VENDOR%"=="Oracle" (...)Also see if the SUN_JAVA_HOME property is set to the correct directory.
technical session - http://middlewaremagic.com/weblogic/?p=7831

[SOLVED] sed: unrecognized option '--follow-symlinks'

I tried to build AUR package linuxcnc-sim and I got this error:
sed: unrecognized option '--follow-symlinks'
I thought that my sed command is outdated, so I tried to update it:
[ziga@Ziga-laptop linuxcnc]$ sudo pacman -Syy
:: Synchronizing package databases...
core 120.1 KiB 125K/s 00:01 [##############################################] 100%
extra 1793.4 KiB 191K/s 00:09 [##############################################] 100%
community 2.5 MiB 384K/s 00:07 [##############################################] 100%
multilib 123.9 KiB 1239K/s 00:00 [##############################################] 100%
[ziga@Ziga-laptop linuxcnc]$ sudo pacman -S sed
warning: sed-4.2.2-3 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) sed-4.2.2-3
Total Installed Size: 0.76 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
What I discovered was, that my sed command already is the newest version... does anyone have an idea what is wrong?
If I use man sed I get user manual where it says that unrecognized option '--follow-symlinks' is supported:
SED(1) User Commands SED(1)
NAME
sed - stream editor for filtering and transforming text
SYNOPSIS
sed [OPTION]... {script-only-if-no-other-script} [input-file]...
DESCRIPTION
Sed is a stream editor. A stream editor is used to perform basic text transformations on an input stream (a file or input
from a pipeline). While in some ways similar to an editor which permits scripted edits (such as ed), sed works by making
only one pass over the input(s), and is consequently more efficient. But it is sed's ability to filter text in a pipeline
which particularly distinguishes it from other types of editors.
-n, --quiet, --silent
suppress automatic printing of pattern space
-e script, --expression=script
add the script to the commands to be executed
-f script-file, --file=script-file
add the contents of script-file to the commands to be executed
--follow-symlinks
follow symlinks when processing in place
Last edited by 71GA (2015-02-13 07:14:59)

This could really be it. And my PATH is really weird - some inputs are doubled:
PATH=/opt/ARM/eldk/usr/bin:/opt/ARM/eldk/bin:/opt/ARM/eldk/usr/bin:/opt/ARM/eldk/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/opt/opencascade/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl:/opt/ARM/cs_lite/bin:/opt/ARM/unsimgcr:/opt/ARM/ds/bin:/opt/ARM/cs_lite/bin:/opt/ARM/unsimgcr:/opt/ARM/ds/bin
I modify my PATH at startup using ~/.bashrc
# ~/.bashrc
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
export PATH=${PATH}:/opt/ARM/cs_lite/bin
export PATH=${PATH}:/opt/ARM/unsimgcr
export PATH=${PATH}:/opt/ARM/ds/bin
source /opt/ARM/eldk/eldk_init arm
What am I doing wrong in the .bashrc ?
Last edited by 71GA (2015-02-13 06:21:23)

Remote profiling on oc4j 10.1.2 on solaris. -ojvm unrecognized option

Hi I have problems starting OC4J using the -ojvm -XXtimeport4000 parameters on a Solaris box.
The java runtime complains about unrecognized option. I've tried to find some information how to enable ojvm on the java runtime supplied with IAS 10g 10.1.2.
Do anyone have any clues?
/Henrik

Thanks Luke,
I changed
vo.setWhereClause(" USER_NAME=?");
to
vo.setWhereClause(" USER_NAME=:0");
And that particular segment worked as expected.
Thanks
David

All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

Systemctl start mysqld unrecognized option --ssl-ca=

I have spent most of the last 18 hours reading manuals, searching the web and searching these forums for an answer, but have not found anything that worked or that even matched the issue I am having. So here goes.
Issue: Entering the command:
$ sudo systemctl start mysqld --ssl-ca=/path/to/ca-cert.pem --ssl-cert=/path/to/server-cert.pem --ssl-key=/path/to/server-key.pem
and pressing 'Enter' only gets me this error:
systemctl: unrecognized option '--ssl-ca=/path/to/ca-cert.pem'
OR it will act as though it accepted the command but the server does not start. And they happen with about equal frequency.
Does anyone have any ideas as to what is going on?
Again, I have read the manuals - all of them. I have followed directions found on nearly every single hit that came up on google and bing in the last 18 hours. I've tried with both MySQL 5.6.15 Source distribution from the AUR and with MariaDB. I have added these options to /etc/mysql/my.cnf (there are no other copies on the system):
[client]
ssl-ca=/path/to/ca-cert.pem
ssl-cert=/path/to/client-cert.pem
ssl-key=/path/to/client-key.pem
[mysqld]
ssl-ca=/path/to/ca-cert.pem
ssl-cert=/path/to/server-cert.pem
ssl-key=/path/to/server-key.pem
And still, nothing. I have verified that MySQL is in fact SSL capable, per the directions in the documentation. Still, no dice.
This thing seems intent on keeping me from using SSL.
The pertinents:
mysql --version returns: Ver 14.14 Distrib 5.6.15, for Linux (x86_64) using EditLine wrapper
uname -a returns: Linux [hostname] 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64 GNU/Linux
In case it is worth mentioning, Arch is running on a virtual machine. VMware Player ver. 6.0.1 build-1379776 on a Windows 7 Professional host, 64-bit ver. 6.1.7601, SP1.
I could really use some help folks.

Spider.007 wrote:
Okay when you are using systemctl you are instructing systemd to do something such as 'start mysqld'. Any options you pass, will be parsed by systemctl (not mysqld). That is the reason systemd complains of an unknown option (systemd doesn't have a ssl-ca option).
The options you put in you my.cnf should be sufficient. However the mysql client doesn't automatically use ssl when connecting; so after starting mysqld (systemctl start mysqld) use the client to see if ssl works:
mysql --ssl-ca=/path/to/ca-cert.pem
If you client connects successful that doesn't mean it's using ssl though, enter '\s' and check if ssl is enabled.
No dice:
$ mysql --ssl-ca=/path/to/ca-cert.pem
Welcome to the MySQL monitor. Commands end with ; or \g
Your MySQL connection id is 4
Server version: 5.6.15 Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trade..../* You get the idea... */
mysql> \s
mysql Ver 14.14 Distrib 5.6.15, for Linux (x86_64) using Editline wrapper
Connection id: 4
Current database:
Current user: user@localhost
SSL: Not in use
/* ......and the rest of the usual... */
mysql>
So. No deal.

JSPC Error "Unrecognized option: -v0."

Hii All
I get this Error (shown below) when i try to compile my Jsp using ANT builder.What can be the reason behind this error.
Thankx in advance
Vikash
/////////////////////// Error is shown below ////////////////////////////////.
Buildfile: build.xml
jspc:
compile:
[jspc] Compiling 79 source filesC:\ant\${webapp.path}\dest
[jasperc] error:org.apache.jasper.JasperException: Unrecognized option: -v0.
Use -help for help.
[jasperc] at org.apache.jasper.JspC.setArgs(JspC.java:306)
[jasperc] at org.apache.jasper.JspC.main(JspC.java:230)
all:
BUILD SUCCESSFUL
Total time: 13 seconds
//////////////////////////Build.xml is shown below ////////////////////
<project name="Webapp Precompilation" default="all" basedir=".">
<target name="jspc">
<taskdef classname="org.apache.jasper.JspC" name="jasper2" >
<classpath id="jspc.classpath">
<pathelement location="C:\Program Files\Apache Software Foundation\Tomcat 5.0/../lib/tools.jar"/>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/bin">
<include name="*.jar"/>
</fileset>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/server/lib">
<include name="*.jar"/>
</fileset>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/common/lib">
<include name="*.jar"/>
</fileset>
</classpath>
</taskdef>
<jasper2
validateXml="false"
uriroot="${webapp.path}"
webXmlFragment="${webapp.path}/WEB-INF/generated_web.xml"
outputDir="${webapp.path}/WEB-INF/src" />
</target>
<target name="compile">
<mkdir dir="${webapp.path}/WEB-INF/classes"/>
<mkdir dir="${webapp.path}/WEB-INF/lib"/>
<jspc destdir="${webapp.path}/dest"
srcdir="${webapp.path}/WEB-INF/src"
excludes="**/*.smap">
<classpath>
<pathelement location="${webapp.path}/WEB-INF/classes"/>
<fileset dir="${webapp.path}/WEB-INF/lib">
<include name="*.jar"/>
</fileset>
<pathelement location="C:\Program Files\Apache Software Foundation\Tomcat 5.0/common/classes"/>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/common/lib">
<include name="*.jar"/>
</fileset>
<pathelement location="C:\Program Files\Apache Software Foundation\Tomcat 5.0/shared/classes"/>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/shared/lib">
<include name="*.jar"/>
</fileset>
<fileset dir="C:\Program Files\Apache Software Foundation\Tomcat 5.0/bin">
<include name="*.jar"/>
</fileset>
</classpath>
<include name="**" />
<exclude name="tags/**" />
</jspc>
</target>
<target name="all" depends="jspc,compile">
</target>
</project>

Hi,
I've had this problem too. The -v options is meant to set the verbosity of the compilation but it doesn't seem to like it. I tried to see which versions of jasper/ ant were at fault (because an old script of mine broke) but couldn't find it quickly so I simply did a little hack in the ant 1.6.1 source to the file
\apache-ant-1.6.1\src\main\org\apache\tools\ant\taskdefs\optional\jsp\compilers\JasperC.java
where I commented out the line in setupJasperCommand()
private CommandlineJava setupJasperCommand() {
addArg(cmd, "-p", jspc.getPackage());
// addArg(cmd, "-v" + jspc.getVerbose());
addArg(cmd, "-uriroot", jspc.getUriroot());
then rebuilt ant and the problem went away.
Cheers
Evan

RVS 4000-V2: PPPoE failed - "unrecognized option '1492'

Similar Messages

Maybe you are looking for