RVS4000 Firmware v2.0.0.3 will not save settings

I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.
If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.
What is going on?

I recently purchased the RVS-4000 v2 and setup a single VPN tunnel. Then I upgraded to the latest firmware v2.0.0.3. Today, I attempted to add a second tunnel and none of the settings could be saved. I found that this was not limited to the VPN settings, so the issue is more widespread; although, I was able to do deletions of tunnels, so this appears to be some sort of global-edit-save issue.
My workaround for the moment was to go back 1 level in the firmware, which of course, is always dangerous with any brand or device. I was not comfortable doing that, but it works for the moment.
Looking at the security issues which v2.0.0.3 addressed, I (and other users) are at a severe disadvantage if we are forced to use firmware prior to v2.0.0.3, and if we do, then we lose edit-save, at the least for VPN, which is why I purchased this to begin with.
So, I'll throw this out to Cisco - the first report of this issue was in August. It is now almost December and there is NO FIX? Cisco is supposed to be *the name* in networking devices. What is going on there? Was ANY Q/A done on this firmware? Now that you know it's broken, why isn't it fixed? I recognize that now you are looking to retire the 4000, but I for one can tell you that this is going to leave a bad feeling with this author if it is done without resolving the obvious issues. I am very sure you have a firmware engineer who knows what happened here and has a fix. So, why isn't it out here for end users? Product manager - where are you?

Similar Messages

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

Very weird day in Firefoxland
First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
WOW!! Are the wheels off the wagon here or what!?!

Launch Zone will not save settings after powering off/on

Ok...noob here, but i just changed Zone 3: Read of the Launcher from Kindle to Zinio, but when I power off the unit (not put it to sleep) and turn it back on, Zone 3 of the launcher reverts back the Kindle app. Anyone have this happen? Am I missing a setting some place?
**FOLLOW UP**
Got off the phone with Lenovo support, their K1 does not revert back to the factory settings when they change one of the "zones" in the Launch Zone application. We even did a factory reset, made changes, turned off the K1, turned it back on and it still would not keep my changes. Their only recommendation is to take it back to Best Buy (where I bought it and see if some there can re-install the Launch Zone application as it apparently has a bug. So unles someone else has any ideas, looks like I am out of luck and have to return this puppy.
Mike

utlax18 wrote:
Since I have 801, I guess that is why my tablet did not get an update out of the box when I went to go update it? I saw people updating to 829, so I was perplexed why I could not get 829 when I was on 801, and naturally 801 being a lesser version number than 829 I was confused. Anyhow, do you have an ETA when the LLW fix will be in (in a week?) and can I simply get it OTA?
Thanks!
I can't give a release date in case we find something last minute and end up with a delay. I wouldn't be surprised to see it sometime next week, but I can't promise that will happen. Once it's released, you'll be able to get it via OTA.
As for the update to 0829, I imaged one of my tablets with the 0801_US manufacturing image and was able to update to 0829 without any issue. Can you give it another shot? When you do "check for new version" under System Updates, you will only get a message immediately if it doesn't find an update. If an update is found, the download will begin immediately, indicated by a little down arrow by the clock. You'll only be prompted to apply the update (or cancel) once the download is complete. It won't fix the LLW persistence issue (I tested that again, just for fun), but it will get you to a more stable image.
If you don't mind, give that a go and please let me know what happens.
Full disclosure: Lenovo issues my paychecks.

HT1218 3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. Want to try and update firmware of Timecapsule, but it will not display an "Update" ico

3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently.
Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
Grrrrr.....makes me miss my stupid PC set up as I could force it to do what I want!
Intermittent connection screws up Netflix, VOIP phone, Amazon, Streaming music via Spotify/Pandora, general internet access.....whole family is ****** off.
Any tips/tricks/ideas???
dave

Downgrade firmware to 7.6.1 .. as the latest is just lousy.
It is easy to downgrade.. hold down the option key whilst you click the version number. in Macs.. lots of stuff is hidden behind an option key.
I also strongly recommend a factory reset and use all SMB names.. not apple type names..
ie TC name.. TCgen4
Wireless name TCwifi (or give names to both bands.. TC24ghz and TC5ghz).
That helps all the non-apple part of the world.. connect.
Also Mavericks has now changed over to SMB as well. So even Mac is now windows networking.
Generally these two things. .7.6.1 firmware and SMB names will fix it.. if not post again as is another step that is possible.. controlling the WAN speed of the TC.

OSX 10.7.4. will not save ANY of my preferences (system or application -- Safari, Office, etc.)

I am running System OSX 10.7.4 on three different MacBooks. It will not save any of my preferences (system or application based), passwords, log-ins and keychain. Even Safari did not save imported bookmarks. I am running Office For Mac 2011 (v 14.2.1) and Outlook will work for a day or two and then I get a rebuild database error message, losing everything. Word, et all, will not save any preferences, not even recent files.
I did a full erase and clean system reinstall and a fresh install of Office. This problem occurs on all 3 of my MacBook, 2- MacBook Pro’s and a MacAir. One of the MacBook Pro’s is BRAND NEW.
Any ideas, any fixes out there?

I have what seems to be a similar issue. Are you having other issues like mine?
Macbook air      11-inch, Late 2010
                        4 GB 1067 MHz DDR3
Software           Mac OS X Lion 10.7.4 (11E53)
I have updated the latest combi update from the apple site and still have the same issue.
No matter what I try every time I restart my Mac all my preferences and applications reset. (Also preferences don't save when exiting the preference folder)
For example when in >system preferences>general -untick the 'restore windows when quitting and re-open apps' I exit preferences and then go back in to check it has automatically reticked the box.
I have deleted 2 applications several times (including removing the icon from the dock) and each time after restarting it shows a question mark on the dock where I had deleted it from.
On restart I loose downloads and history in safai.
On restart it re opens documents and applications I have quite even after unticking the restore applications on restart box (the one that comes up when shutting down or restarting)
I have been trying to solve this for a month now and it really is frustrating the **** out of me.
helpppp pleaseee...

My HP Office Jet Pro L7555 scans but will not save it to a flash drive. Is there a fix for that?

I have a some issues:
1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that?
2. Sometimes when I turn it on it will indicate that one of the ink cartridges is empty and upon restartin it all the cartidges show full. What is the fix for that?
3. We have a small network. I can not find the disks that came with the printer. How do I set it up so it saves to one of the computers connected to the network?
Thanks,
PF1

Hi,
Heres a patch for missing scanned images
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-81532-2&cc=us&dlc=en&lc=en&...
Heres the link for the full feature software download
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-3&cc=us&dlc=en&lc=en&...
and use this document for ink related issues
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&cc=us&dlc=en&ju...
Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Pages 5.0 will not save documents created in Pages 09

I have hundreds of important documents I created and saved in Pages 09. I got a new Mac Mini running Mavericks 10.9.5 with the new Pages 5.0. The new Pages will not save my Pages 09 documents. Pages 09 will not save them either. Help!

1. Is it possible you installed from a demo installer and your 30 day trial period is up, when it goes into Read Only mode?
2. Where and what was your purchased disk?
3. Where are you saving to?
4. Have you tried saving somewhere else eg an external hard drive and see what happens then?
5. The auto-saving issue with Pages 5.2.2 could be problems with iCloud and online access.
Peter

Photoshop CS6 - Batch function will not save files

OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original). I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
Attempt #1:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
NO checkmarks next to any options
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #1 - DID NOT SAVE FILES
Attempt #2:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Cehckmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #2 - DID NOT SAVE FILES
Attempt #3:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #3- DID NOT SAVE FILES
Attempt #4:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #4- DID NOT SAVE FILES
Attempt #5:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
       Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #5- DID NOT SAVE FILES
Please help! This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save. I have several hundred files that I need to run this on, so doing it individually is not an option.
Thanks in advance for any and all insights!

I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
~CG
UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

Firefox will not save Site Certificate Exceptions even when checked to do so.

I have a publicly free Wifi Access point near by that I use daily. When logging on to this site I get a Warning about the Sites Certificate and do I want to proceed, I choose YES and then are asked if I want to make this exception permanent and I put a check mark in the box for yes and press accept. This is suppose to permanently accept this websites certificate in the future. It does not.. It will not save the exception from one session to the next.
IN SHORT: Firefox failure to permanently store website Certificate exceptions.

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/Username+and+password+not+remembered
*Tools > Options > Security: Passwords: "Remember passwords for sites"

My Mac Acrobat XI 11.0.7 will not save as WORD/ PowerPoint / etc.

My Mac Acrobat XI 11.0.7 will not save as WORD/ PowerPoint / etc.
Is there anything I should check out or turn on so I can save PDFs at PowerPoint?

Rave
Whenever I try to save a pdf to WORD, POWERPOINT OR HTML page I get this error --- Save As failed to process this document. No file was created.
Problem occured when I upgraded to XI. I am using a Mac OS X 10.9.4 and Mac Office 2008.
I have been on chats with Adobe online and on the phone several times and they can resolve the problem.
I have uninstalled and reinstalled Acrobat XI but still have problem
Len

Safari 7.0 will not save PDF

My Safari 7.0 will not save PDF files that can be opened, what do I need to do to get this function working again?

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

The app anime box will not save any pics to my photo library i tryed reinstalling the app but it did not work

the app anime box will not save any pics to my photo library i tryed reinstalling the app but it did not work

there are many apps out for ios so asking for spc app issues here is like asking if anybody know a guy called mike
asking at the developer of the apps would be much adviced
http://bisimplex.com/

RVS4000 Firmware v2.0.0.3 will not save settings

Similar Messages

Maybe you are looking for