RVS4000 Private networking, setting up VLANs need help!

Hello,
I live in a two family residential house and we share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode". Therefore not acting as DHCP.
Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.
Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.
What I have unsuccessfully tried to achieve and am currently begging for help with is to separate the networks so that both families can access internett, but at the same time it must be impossible to access VLAN1(Family A) from VLAN2(Family B) vice versa. Meaning no communication between the two families through the local network.
I have tried different options but I am not sure how to deal with trunk, tagged, untagged etc. etc. etc. It seems every time I manage to create two different networks there is still accessability/communication between the two VLANs and everytime I manage to give out different IP adresses to different ports i.e. 192.168.10.xx and 192.168.2.xx it is still possible to communicate. What also usually happens is that the internetconnection is severed at the same time.
Could anyone be so kind as to help me out? Since I am quite unseasoned in networking I need a step-by-step guide stating every action I need to take. If possible also with illustrations.
Any help will be much appreciated.

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Similar Messages

I Just updated my iPhone 4 tp 7.1 oS. I am unable to connet to any network. I keep getting the "searching" Np Service" messages on the top let corner of the screen. I also get a notice that say " "unable to load network list. I need help...

I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

My wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting etc, doesn't help

my wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting, etc, doesn't help!
any suggestions?
jonathan

neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox

VLAN with PAT and 3 networks...I need help with design!

I've been tasked with a major upgrade to my current network and internet access.
1.     I need to have an internal private network with access to the internet. This will be for large meetings, and I'll use a private network with 2048 addresses.
2.     I also will have a small publid network with 8 routable addresses for Firewall, Web Server, PAT (NAT overload) for the above Private network internet access.
3.     I want to split a class C address into two networks to allow one network (128 addresses) for Guest use that need routable addresses, and a second network (the other 128 addresses) for specific meetings that also need routable addresses.
I have:
I have been issued a router from my ISP. They have allocated me one .248 network with 8 addresses (6 usable) and a full class C network.
A Cisco 1841 router with 2 FA ethernet ports. I would like to use one FA port at the outside (to my ISP router) and the other FA port as my Inside port (to all other networks). I will do NAT Overload.
I also have a Layer 3 Catylist 3750 switch.
Do I need to set up VLANs for each Network?
Can I place my network hardware on the 10 network?
Do I need router sub interfaces for my VLANs and can I PAT on a Subinterface?

Hi Brian
1. Do I need to set up VLANs for each Network?
Create seperate VLANS for each subnet and do the intervlan routing on 3750
2. Can I place my network hardware on the 10 network?
Yes
3. Do I need router sub interfaces for my VLANs and can I PAT on a Subinterface?
Not required. You can do the intervlan routing on your Layer 3 3750 switch. From 3750 you can point a default-route to the router.
On the router you can perform PAT based on an ACL. Also you need to add Static NAT for your Webserver etc
Thank you
Raju

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

I cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

i cant download apps throgh wifi on my iphone however when i connect to cellular data it starts downloading. then what is wrong over wifi , i tried reset network setting but i didnt help

Definitely sounds like an issue with your Wi-Fi network. Do any other devices on the network have similar issues? Is it an issue only with downloading apps? You can check by trying to load a website in Safari.
I would try turning your Wi-Fi router off for 1 minute, and back on again.
After doing that, disconnect and re-join the Wi-Fi network on your iPhone and try downloading an app again.

Issue setting up iview - Need help

Hi,
I'm setting up an iview to surface a SAP BW report through SAP NetWeaver 7.0 (2004s)
I've tested the iview with the following value in the "BEx Web Application Query String" property of the iview
and am able to view my BW report in the portal iview as expected
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=W123456
I now want to use a variable so that the VAR_VALUE_EXT_1 property of the url is generated at runtime
The VAR_VALUE_EXT_1 property is the user's login id (which must be uppercased for the BW report) so my url now becomes
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]>
The above however fails to give me a report.
On debugging the url at the report end I can see that
&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]> is being presented to the report rather than the user's actual login id
being substituted at run time as expected
I'm using the information here
http://help.sap.com/saphelp_nw04/helpdata/en/36/5e3842134bad04e10000000a1550b0/frameset.htm
as a guide but am unable to get my report to work with the runtime url parameter substitution
Has anyone come across this before and have a solution?
Thanks in advance
Krishna

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Connected to network but no connectivity- need help

The Iphone shows network connectivity (bars on left) but when some one calls me the phone appears to be ringing to them but there is no ring on my side. If I try to call someone the call just hangs and when I "end call" it goes to the home screen and when i go to the dialpad the old call is still "dialling". I am not able to use the phone service at all.
The previous time it occured I just reset the Iphone using Itunes and in the process lost all the data but the phone recovered. can some one help me with this?
By the way this problem occured after i changed the OS to 5.

If you look at wifi settings what IP address has been assigned to the iPad? If it starts with 169 then the iPad never successfully connected to the router. What security setting are you using? Some say WPA2 works best. You can also search the ipad wifi forum for similar problems since this problem comes up at least one a day.

HT203993 How do I make a new iCloud i have one set up but need help deleting it

i have an Apple ID and I know the password. I had set up an iCloud account but I put the wrong email.. So now I don't know how to delete it because I don't know the password please somebody help me

https://iforgot.apple.com/appleid
If you forgot your Apple ID password - Apple Support
Contact Apple for help with Apple ID account security
https://ssl.apple.com/emea/support/itunes/contact.html
(988)

Struggling to set up. Need help with pairing Apple TV and the remote. Any guidance, other than holding down the Menu and R buttons?

I am using Ethernet cable to connect Apple TV. I have connected to Cable TV box as directed by cable provider. I have connected the HDMI cable from TV back to the Apple TV box. Power cord is connected. What am I doing wrong? Remote and Apple TV are not connecting....

Thanks for sending the link.....unfortunately we are a home without wireless...My phone and iPad use 3G and our TV and Mac computers are connected via Ethernet ....
That said, my new Apple TV is using Ethernet and I cannot use the app without wireless.
Thanks for your effort to assist!

Microsoft hosted network virtual adaptor - setting ip is impossible - need help

I am able to create hostednetwork and access internet when I have public or private wifi
when I try to do the same with my reliance data card and share the internet to other device, it failed
problem Is the ip address in hosted network client is disappearing as soon as exit the window.
by default it should be 192.168.137.1, 255.255.255.0 but I am unable to set it manually.
need help
I am waiting for the solution for more than six months

reliance data card?
which means.. its a broadband USB modem(CDMA type)
but now i have reinstalled the os. i got the solution for sharing internet from such a cdma type USB modem to hostednetwork.
the sol is
Creating a new connection( set up a new connection or network) in network and sharing centre .
assing the dial up code, user name , password in that setup.
dial the new conncetion
now your system is connceted to the internet (just like the process done by the software given in that usb modem to get connected to the internet)
now we can share this internet to the hostednetwork client.
so click on the new conncetion -> setting> sharing>share to other dev
fornew hostednetwork
cmd window as admin
type the following cmd in cmd window
netsh wlan set hostednetwork mode=allow ssid=funonly key=12345678
netsh wlan start hostednetwork

Clustered Environment - Changing from Public Network to Private Network

I have a clustered environment where the database sits on one node and the central instance sits on the other node. We just found out that somehow the communication between the database and central instance has been changed to talk over the public network instead of the private network. We don't know who did it or why.
So, my question is what do I need to do in SAP to accomodate the changing back to using the private network? Do I need to change system names in the profiles? Are there any gotchas on doing this? Are there any documents on doing this?
Thanks for any information you can provide on this topic.
Thanks,
-- Jackie

This is most likely a name resolving problem.
If you ping <name> from one server to the other, which network is used?
Markus

NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection

I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from traversing our static VPN tunnel back to HQ.
The bar processes all credit cards via the T1 connection, and this has caused us to lose money every time the T1 goes down while we're open, since there is no WAN redundancy right now.
Here is my current hardware configuration:
1) one PIX 501 50-user 3des.
2.) two Dell 3024
3.) one Aironet 1100(g) AP.
Current LAN Network: 10.35.35.0
(internal employees only, static VPN tunneled to remote HQ network)
Current Wireless SSID's:
SSID1=PRIVATESSID
SSID2=PUBLICSSID (not currently in use, waiting to figure this out)
Current WAN: one T1 connection.
WHAT I WOULD LIKE TO DO AND NEED HELP FIGURING OUT:
#1a) I want to create two separate VLAN's that are able to share the WAN connection, but not be able to "see" each other.
#1b) These VLAN's would be mapped to their respective SSID's on the AP (PRIVATESSID>10.35.35.0 and PUBLICSSID>192.168.1.0).
#1c) The 192.168.1.0 network should not be able to traverse the static tunnel between the branch site and HQ.
#2) I would like to install a backup WAN connection such as a modem 56k dial-up to an ISP or a cable modem to an ISP. In case the primary T1 goes down, I would like the router to automatically dial out over the modem conection and route all Internet bound traffic over that backup WAN connection, until the primary comes back online.
Question 1:
I'm assuming I need a router to do the intervlan routing. Could this router also do the on-demand WAN backup dialing to an ISP via analog modem?
What IOS version and flavor (IP base, IP+, etc.) would I need? What is the cheapest router I can do all that with (i.e. 2620/2621/1720/3600 series)? What WIC's or NM's would I need?
Question Two:
I would like to prioritize PRIVATESSID's traffic over PUBLICSSID's traffic, which I know I can do on the access point. Can I do this on the router so that any 10.35.35.0 traffic takes priority over any 192.168.1.0 traffic?
Question Three
If the primary T1 WAN connection goes down, I don't want the router to re-route the 192.168.1.0 traffic over the backup 56k dial-up WAN connection. That traffic can wait until the T1 comes back up.
Any help you can provide would be very much appreciated.

Assuming your access points can place SSID into separate vlans and support 802.1q trunks then I can attempt to answer your questions. There are seperate secuity issues with both SSID for protection and VLANs for seperation but in your case in may be minimal.
q1
Any cisco router that will run 802.1q trunking will work. Since you are looking at older routers you will need IP+ to get it. Even 2610's will support 802.1q on their 10m ethernet at the correct code level but 10m and 802.1q is sorta nonstandard. Since your backup is only 56k you can use the internal modem port as a dial backup. A wic-2a/s will also work if you prefer not to use the modem port. You will need some wic to run your t1 line. If you are planning to leave the t1 on another router it makes the next 2 questions much harder.
q2
This is fairly simple and depends on your ios level. "priority queing" is supported on even the older software. I assume you do not control the far end of the t1 line since it sounds as if this goes to a ISP.
You will need to have them do the QoS since most issues with the internet are inbound and not outbound. You can only control outbound traffic.
q3
If the T1 is on the same router then this is fairly simple. You can just put a floating static default route in that will cause the dialer to come up if the the t1 goes down. There is no easy way to protect against the line being up but no traffic passing. This is also why it would be best to have the t1 on the same router. If its not you will need to get very creative to solve this. You could build a GRE tunnel to a remote location and montior the tunnel or run a routing protcol over the tunnel. In the newest software you could use SAA and policy routing to force the traffic over the dialer but the router must support ios 12.4.
3a. You mentioned a cable modem as a backup. That can be much easier sometimes since it is all routing and no dialer interfaces with nasty modem issues. This does not make the issue of the t1 not on the same router easier.

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

RVS4000 Private networking, setting up VLANs need help!

Similar Messages

Maybe you are looking for